Summary of changes:
1. Coroutines now have a distinct, separate from generators
type at the C level: PyGen_Type, and a new typedef PyCoroObject.
PyCoroObject shares the initial segment of struct layout with
PyGenObject, making it possible to reuse existing generators
machinery. The new type is exposed as 'types.CoroutineType'.
As a consequence of having a new type, CO_GENERATOR flag is
no longer applied to coroutines.
2. Having a separate type for coroutines made it possible to add
an __await__ method to the type. Although it is not used by the
interpreter (see details on that below), it makes coroutines
naturally (without using __instancecheck__) conform to
collections.abc.Coroutine and collections.abc.Awaitable ABCs.
[The __instancecheck__ is still used for generator-based
coroutines, as we don't want to add __await__ for generators.]
3. Add new opcode: GET_YIELD_FROM_ITER. The opcode is needed to
allow passing native coroutines to the YIELD_FROM opcode.
Before this change, 'yield from o' expression was compiled to:
(o)
GET_ITER
LOAD_CONST
YIELD_FROM
Now, we use GET_YIELD_FROM_ITER instead of GET_ITER.
The reason for adding a new opcode is that GET_ITER is used
in some contexts (such as 'for .. in' loops) where passing
a coroutine object is invalid.
4. Add two new introspection functions to the inspec module:
getcoroutinestate(c) and getcoroutinelocals(c).
5. inspect.iscoroutine(o) is updated to test if 'o' is a native
coroutine object. Before this commit it used abc.Coroutine,
and it was requested to update inspect.isgenerator(o) to use
abc.Generator; it was decided, however, that inspect functions
should really be tailored for checking for native types.
6. sys.set_coroutine_wrapper(w) API is updated to work with only
native coroutines. Since types.coroutine decorator supports
any type of callables now, it would be confusing that it does
not work for all types of coroutines.
7. Exceptions logic in generators C implementation was updated
to raise clearer messages for coroutines:
Before: TypeError("generator raised StopIteration")
After: TypeError("coroutine raised StopIteration")
Known limitations of the current implementation:
- documentation changes are incomplete
- there's a reference leak I haven't tracked down yet
The leak is most visible by running:
./python -m test -R3:3 test_importlib
However, you can also see it by running:
./python -X showrefcount
Importing the array or _testmultiphase modules, and
then deleting them from both sys.modules and the local
namespace shows significant increases in the total
number of active references each cycle. By contrast,
with _testcapi (which continues to use single-phase
initialisation) the global refcounts stabilise after
a couple of cycles.
The concept of .pyo files no longer exists. Now .pyc files have an
optional `opt-` tag which specifies if any extra optimizations beyond
the peepholer were applied.
PyObject_Calloc(), _PyObject_GC_Calloc(). bytes(int) and bytearray(int) are now
using ``calloc()`` instead of ``malloc()`` for large objects which is faster
and use less memory (until the bytearray buffer is filled with data).
__file__.
This causes _frozen_importlib to no longer have __file__ set as well
as any frozen module imported using imp.init_frozen() (which is
deprecated).
now register both filenames in the exception on failure.
This required adding new C API functions allowing OSError exceptions
to reference two filenames instead of one.
* You may now specify an expression as the default value for a
parameter! Example: "sys.maxsize - 1". This support is
intentionally quite limited; you may only use values that
can be represented as static C values.
* Removed "doc_default", simplified support for "c_default"
and "py_default". (I'm not sure we still even need
"py_default", but I'm leaving it in for now in case a
use presents itself.)
* Parameter lines support a trailing '\\' as a line
continuation character, allowing you to break up long lines.
* The argument parsing code generated when supporting optional
groups now uses PyTuple_GET_SIZE instead of PyTuple_GetSize,
leading to a 850% speedup in parsing. (Just kidding, this
is an unmeasurable difference.)
* A bugfix for the recent regression where the generated
prototype from pydoc for builtins would be littered with
unreadable "=<object ...>"" default values for parameters
that had no default value.
* Converted some asserts into proper failure messages.
* Many doc improvements and fixes.
- don't call PyErr_NoMemory with interpreter is not initialised
- note that it's OK to call _PyMem_RawStrDup here
- don't include this in the limited API
- capitalise "IO"
- be explicit that a non-zero return indicates an error
- include versionadded marker in docs
This new pre-initialization API allows embedding
applications like Blender to force a particular
encoding and error handler for the standard IO streams.
Also refactors Modules/_testembed.c to let us start
testing multiple embedding scenarios.
(Initial patch by Bastien Montagne)
The GIL must be held to call PyMem_Malloc(), whereas PyOS_Readline() releases
the GIL to read input.
The result of the C callback PyOS_ReadlineFunctionPointer must now be a string
allocated by PyMem_RawMalloc() or PyMem_RawRealloc() (or NULL if an error
occurred), instead of a string allocated by PyMem_Malloc() or PyMem_Realloc().
Fixing this issue was required to setup a hook on PyMem_Malloc(), for example
using the tracemalloc module.
PyOS_Readline() copies the result of PyOS_ReadlineFunctionPointer() into a new
buffer allocated by PyMem_Malloc(). So the public API of PyOS_Readline() does
not change.
_PyMem_RawMalloc/Realloc/Free, instead of _PyMem_Malloc/Realloc/Free. So it
becomes possible to use the fast pymalloc allocator for the PYMEM_DOMAIN_MEM
domain (PyMem_Malloc/Realloc/Free functions).
-I
Run Python in isolated mode. This also implies -E and -s. In isolated mode
sys.path contains neither the script’s directory nor the user’s
site-packages directory. All PYTHON* environment variables are ignored,
too. Further restrictions may be imposed to prevent the user from
injecting malicious code.
Add new enum:
* PyMemAllocatorDomain
Add new structures:
* PyMemAllocator
* PyObjectArenaAllocator
Add new functions:
* PyMem_RawMalloc(), PyMem_RawRealloc(), PyMem_RawFree()
* PyMem_GetAllocator(), PyMem_SetAllocator()
* PyObject_GetArenaAllocator(), PyObject_SetArenaAllocator()
* PyMem_SetupDebugHooks()
Changes:
* PyMem_Malloc()/PyObject_Realloc() now always call malloc()/realloc(), instead
of calling PyObject_Malloc()/PyObject_Realloc() in debug mode.
* PyObject_Malloc()/PyObject_Realloc() now falls back to
PyMem_Malloc()/PyMem_Realloc() for allocations larger than 512 bytes.
* Redesign debug checks on memory block allocators as hooks, instead of using C
macros
* Add a new PyMemAllocators structure
* New functions:
- PyMem_RawMalloc(), PyMem_RawRealloc(), PyMem_RawFree(): GIL-free memory
allocator functions
- PyMem_GetRawAllocators(), PyMem_SetRawAllocators()
- PyMem_GetAllocators(), PyMem_SetAllocators()
- PyMem_SetupDebugHooks()
- _PyObject_GetArenaAllocators(), _PyObject_SetArenaAllocators()
* Add unit test for PyMem_Malloc(0) and PyObject_Malloc(0)
* Add unit test for new get/set allocators functions
* PyObject_Malloc() now falls back on PyMem_Malloc() instead of malloc() if
size is bigger than SMALL_REQUEST_THRESHOLD, and PyObject_Realloc() falls
back on PyMem_Realloc() instead of realloc()
* PyMem_Malloc() and PyMem_Realloc() now always call malloc() and realloc(),
instead of calling PyObject_Malloc() and PyObject_Realloc() in debug mode
Forgot to raise ModuleNotFoundError when None is found in sys.modules.
This led to introducing the C function PyErr_SetImportErrorSubclass()
to make setting ModuleNotFoundError easier.
Also updated the reference docs to mention ModuleNotFoundError
appropriately. Updated the docs for ModuleNotFoundError to mention the
None in sys.modules case.
Lastly, it was noticed that PyErr_SetImportError() was not setting an
exception when returning None in one case. That issue is now fixed.
ImportError.
The exception is raised by import when a module could not be found.
Technically this is defined as no viable loader could be found for the
specified module. This includes ``from ... import`` statements so that
the module usage is consistent for all situations where import
couldn't find what was requested.
This should allow for the common idiom of::
try:
import something
except ImportError:
pass
to be updated to using ModuleNotFoundError and not accidentally mask
ImportError messages that should propagate (e.g. issues with a
loader).
This work was driven by the fact that the ``from ... import``
statement needed to be able to tell the difference between an
ImportError that simply couldn't find a module (and thus silence the
exception so that ceval can raise it) and an ImportError that
represented an actual problem.
attributes to None.
The long-term goal is for people to be able to rely on these
attributes existing and checking for None to see if they have been
set. Since import itself sets these attributes when a loader does not
the only instances when the attributes are None are from someone
overloading __import__() and not using a loader or someone creating a
module from scratch.
This patch also unifies module initialization. Before you could have
different attributes with default values depending on how the module
object was created. Now the only way to not get the same default set
of attributes is to circumvent initialization by calling
ModuleType.__new__() directly.
PyErr_SetFromWindowsErrWithFilenameObject, and
PyErr_SetExcFromWindowsErrWithFilenameObject.
Note that PyErr_SetExcFromWindowsErrWithFilenameObjectAndSomeOtherParametersSoThatTheNameGetsSoLongThatNobodyIsEverGonnaUseThisStrangeFunctionForAnything is still undocumented.
This commit also moves the documentation for the str built-in function to
the new class entry. Links to :class:`str` now go to the class entry with
the string methods immediately afterwards.
This commit also moves the documentation for the str built-in function to
the new class entry. Links to :class:`str` now go to the class entry with
the string methods immediately afterwards.
PyImport_ImportModuleLevel() with a 'level' of 0 instead of -1 as the
latter is no longer a valid value.
Also added a versionchanged note for PyImport_ImportModuleLevel() just
in case people don't make the connection between changes to
__import__() and this C function.
Lib/imp.py for imp.source_from_cache() instead of its own C version.
Also change PyImport_ExecCodeModuleObject() to not infer the source
path from the bytecode path like
PyImport_ExecCodeModuleWithPathnames() does. This makes the function
less magical.
This also has the side-effect of removing all uses of MAXPATHLEN in
Python/import.c which can cause failures on really long filenames.
defined in sysmodule.c instead of straight out of a Unicode object.
Thanks to Amaury Forgeot d'Arc for noticing the bug and Eric Snow for
writing the patch.
They're optional-only for now (unlike in pure Python) but that's all
I needed. The syntax can easily be relaxed if we want to support
required keyword-only arguments for extension types in the future.
and lifetime issues of dynamically allocated Py_buffer members (#9990)
as well as crashes (#8305, #7433). Many new features have been added
(See whatsnew/3.3), and the documentation has been updated extensively.
The ndarray test object from _testbuffer.c implements all aspects of
PEP-3118, so further development towards the complete implementation
of the PEP can proceed in a test-driven manner.
Thanks to Nick Coghlan, Antoine Pitrou and Pauli Virtanen for review
and many ideas.
- Issue #12834: Fix incorrect results of memoryview.tobytes() for
non-contiguous arrays.
- Issue #5231: Introduce memoryview.cast() method that allows changing
format and shape without making a copy of the underlying memory.
PyDateTime_DELTA_GET_DAYS, PyDateTime_DELTA_GET_SECONDS,
PyDateTime_DELTA_GET_MICROSECONDS.
Please use them instead of directly accessing PyDateTime_Delta struct members.
* PyUnicode_DecodeLocaleAndSize() and PyUnicode_DecodeLocale() decode a string
from the current locale encoding
* _Py_char2wchar() writes an "error code" in the size argument to indicate
if the function failed because of memory allocation failure or because of a
decoding error. The function doesn't write the error message directly to
stderr.
* Fix time.strftime() (if wcsftime() is missing): decode strftime() result
from the current locale encoding, not from the filesystem encoding.
Extract of the commit message:
Fix usage of :option: in the docs (#9312).
:option: is used to create a link to an option of python, not to mark
up any instance of any arbitrary command-line option. These were
changed to ````.
Yury Selivanov
Serhiy Storchaka
Nick Coghlan
R David Murray
Larry Hastings
Gregory P. Smith
Brett Cannon
Victor Stinner
Berker Peksag
Stefan Krah
Georg Brandl
Benjamin Peterson
Antoine Pitrou
Andrew Svetlov
Jesus Cea
Zachary Ware
Eric Snow
Éric Araujo
Martin v. Löwis
Raymond Hettinger
Christian Heimes
Eli Bendersky
Andrew Kuchling
Ezio Melotti
Kristján Valur Jónsson
Terry Jan Reedy
Chris Jerdonek
Armin Ronacher
Mark Dickinson
Brian Curtin
Meador Inge
Amaury Forgeot d'Arc
Sandro Tosi
Victor Stinner