* Fix AttributeError (not all SSL exceptions have 'errno' attribute)
* Increase default handshake timeout from 10 to 60 seconds
* Make sure start_tls can be cancelled correctly
* Make sure any error in SSLProtocol gets propagated (instead of just being logged)
(cherry picked from commit 9602643120)
Co-authored-by: Yury Selivanov <yury@magic.io>
Currently, asyncio.wait_for(fut), upon reaching the timeout deadline,
cancels the future and returns immediately. This is problematic for
when *fut* is a Task, because it will be left running for an arbitrary
amount of time. This behavior is iself surprising and may lead to
related bugs such as the one described in bpo-33638:
condition = asyncio.Condition()
async with condition:
await asyncio.wait_for(condition.wait(), timeout=0.5)
Currently, instead of raising a TimeoutError, the above code will fail
with `RuntimeError: cannot wait on un-acquired lock`, because
`__aexit__` is reached _before_ `condition.wait()` finishes its
cancellation and re-acquires the condition lock.
To resolve this, make `wait_for` await for the task cancellation.
The tradeoff here is that the `timeout` promise may be broken if the
task decides to handle its cancellation in a slow way. This represents
a behavior change and should probably not be back-patched to 3.6 and
earlier.
(cherry picked from commit e2b340ab41)
Co-authored-by: Elvis Pranskevichus <elvis@magic.io>
Use transport.set_write_buffer_limits() in sendfile tests of
test_asyncio to make sure that the protocol is paused after sending
4 KiB. Previously,
test_sendfile_fallback_close_peer_in_the_middle_of_receiving() failed
on FreeBSD if the DATA was smaller than the default limit of 64 KiB.
(cherry picked from commit 9551f77192)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
In this commit:
* Support BufferedProtocol in set_protocol() and start_tls()
* Fix proactor to cancel readers reliably
* Update tests to be compatible with OpenSSL 1.1.1
* Clarify BufferedProtocol docs
* Bump TLS tests timeouts to 60 seconds; eliminate possible race from start_serving
* Rewrite test_start_tls_server_1
(cherry picked from commit dbf102271f)
Co-authored-by: Yury Selivanov <yury@magic.io>
Fixed bug where calling write_eof() on a _SelectorSocketTransport after
it's already closed raises AttributeError.
(cherry picked from commit 23f587e395)
Co-authored-by: twisteroid ambassador <twisteroidambassador@users.noreply.github.com>
* bpo-33353: test_asyncio uses smaller sendfile data (#7083)
bpo-32622, bpo-33353: sendfile() tests of test_asyncio use socket
buffers of 1 kB "to test on relative small data sets". Send only
160 KiB rather 10 MB to make the test much faster.
Shrink also SendfileBase.DATA from 1600 KiB to 160 KiB.
On Linux, 3 test_sock_sendfile_mix_with_regular_send() runs now take
less than 1 second, instead of 18 seconds.
On FreeBSD, the 3 tests didn't hang, but took 3 minutes. Now
the 3 tests pass in less than 1 seconds.
(cherry picked from commit 2932755cc1)
* bpo-33353: test_asyncio set SO_SNDBUF after connect (GH-7086)
bpo-32622, bpo-33353: On macOS, sock.connect() changes the
SO_SNDBUF value. Only set SO_SNDBUF and SO_RCVBUF buffer sizes
once a socket is connected or binded, not before.
(cherry picked from commit b97de3dd86)
TLS 1.3 behaves slightly different than TLS 1.2. Session tickets and TLS
client cert auth are now handled after the initialy handshake. Tests now
either send/recv data to trigger session and client certs. Or tests
ignore ConnectionResetError / BrokenPipeError on the server side to
handle clients that force-close the socket fd.
To test TLS 1.3, OpenSSL 1.1.1-pre7-dev (git master + OpenSSL PR
https://github.com/openssl/openssl/pull/6340) is required.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 529525fb5a)
* bpo-33263 Fix FD leak in _SelectorSocketTransport. (GH-6450)
Under particular circumstances _SelectorSocketTransport can try to add a reader
even the transport is already being closed. This can lead to FD leak and
invalid stated of the following connections. Fixed the SelectorSocketTransport
to add the reader only if the trasport is still active.
(cherry picked from commit a84d0b361a)
Co-authored-by: Vlad Starostin <drtyrsa@yandex.ru>
The proactor event loop has a race condition when reading with
pausing/resuming. `resume_reading()` unconditionally schedules the read
function to read from the current future. If `resume_reading()` was
called before the previously scheduled done callback fires, this results
in two attempts to get the data from the most recent read and an
assertion failure. This commit tracks whether or not `resume_reading`
needs to reschedule the callback to restart the loop, preventing a
second attempt to read the data.
(cherry picked from commit 4151061855)
Co-authored-by: CtrlZvi <viz+github@flippedperspective.com>
* Skip write()/data_received() if sslpipe is destroyed
(cherry picked from commit 5e80a71ab6)
Co-authored-by: Andrew Svetlov <andrew.svetlov@gmail.com>
test_asyncio hangs indefinitely on macOS 10.13.2+ on `read_pty_output()`
using the KqueueSelector. Closing `proto.transport` (as is done in
`write_pty_output()`) seems to fix it.
(cherry picked from commit 12f74d8608)
Co-authored-by: Nathan Henrie <n8henrie@users.noreply.github.com>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 05d9fe32a1)
Co-authored-by: Christian Heimes <christian@python.org>
* Support sendfile on Windows Proactor event loop naively.
(cherry picked from commit a19fb3c6aa)
Co-authored-by: Andrew Svetlov <andrew.svetlov@gmail.com>
To mitigate the situation when the buildbot is under load
and is unable to send/receive data fast enough:
* reduce the size of the payload
* set a generous timeout for socket ops
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32662: Implement Server.start_serving() and Server.serve_forever()
New methods:
* Server.start_serving(),
* Server.serve_forever(), and
* Server.is_serving().
Add 'start_serving' keyword parameter to loop.create_server() and
loop.create_unix_server().
Specifically, it's not possible to subclass Task/Future classes
and override the following methods:
* Future._schedule_callbacks
* Task._step
* Task._wakeup
Miss Islington (bot)
Yury Selivanov
Victor Stinner
Ned Deily
Andrew Svetlov
Christian Heimes
José Melero Fernández
Victor Stinner
Nathaniel J. Smith