Previously mailbox was copying a list of attributes from one message object to
another in order to "copy the message data". This means that any time new
attributes were added to email.message.Message, mailbox broke. Now instead it
copies all attributes from the source object to the target object, skipping
any mailbox-object-specific attributes to produce the same clean initial
state it was previously getting by copying only the "known" attributes.
David Lam assisted in the development of this patch.
In Python2, if a unicode string was assigned as the value of a header,
email would automatically CTE encode it using the UTF8 charset.
This capability was lost in the Python3 translation, and this patch
restores it.
Patch by Ali Ikinci, assisted by R. David Murray.
I also added a fix for the mailbox test that was depending (with a comment
that it was a bad idea to so depend) on non-ASCII causing message_from_string
to raise an error. It now uses support.patch to induce an error during
message serialization.
In Python2, if a unicode string was assigned as the value of a header,
email would automatically CTE encode it using the UTF8 charset.
This capability was lost in the Python3 translation, and this patch
restores it.
Patch by Ali Ikinci, assisted by R. David Murray.
I also added a fix for the mailbox test that was depending (with a comment
that it was a bad idea to so depend) on non-ASCII causing message_from_string
to raise an error. It now uses support.patch to induce an error during
message serialization.
Remove a sleep to fix transient test failures. Use skewfactor of -3 to
make it work on systems that have 1 second precision for time.time().
Closes#11999
Refs #13254
We don't need to create a temporary buffered binary or text file object just to
create an empty file.
Replace also os.fdopen(handle).close() by os.close(handle).
All of the other methods in mailbox that create message objects take care to
close the file descriptors they use, so it seems to make sense to have
__getitem__ do so as well.
Patch by Filip Gruszczyński.
'latin-1' and 'utf-8'.
These are optimized in the Python Unicode implementation
to result in more direct processing, bypassing the codec
registry.
Also see issue11303.
Although this patch contains API changes and is rather weighty for an
RC phase, the mailbox module was essentially unusable without the patch
since it would produce UnicodeErrors when handling non-ascii input
at arbitrary and somewhat mysterious places, and any non-trivial amount
of email processing will encounter messages with non-ascii bytes.
The release manager approved the patch application.
The changes allow binary input, and reject non-ASCII string input early
with a useful message instead of failing mysteriously later. Binary
is used internally for reading and writing the mailbox files. StringIO
and Text file input are deprecated.
Initial patch by Victor Stinner, validated and expanded by R. David Murray.
svn+ssh://pythondev@svn.python.org/python/trunk
........
r77952 | mark.dickinson | 2010-02-03 10:50:14 -0600 (Wed, 03 Feb 2010) | 1 line
Fix test_inspect.py data to match recent change to inspect_fodder.py (r77942).
........
r78030 | benjamin.peterson | 2010-02-06 14:14:10 -0600 (Sat, 06 Feb 2010) | 1 line
check type_getattro for correctness in a descriptor corner case
........
r78102 | andrew.kuchling | 2010-02-07 19:35:35 -0600 (Sun, 07 Feb 2010) | 1 line
Move distutils into its own subsection; add various items
........
r78104 | andrew.kuchling | 2010-02-08 07:22:24 -0600 (Mon, 08 Feb 2010) | 1 line
Add two items; move a subsection
........
r78107 | antoine.pitrou | 2010-02-08 14:25:47 -0600 (Mon, 08 Feb 2010) | 3 lines
Clarify and correct description for ccbench and iobench.
........
r78206 | r.david.murray | 2010-02-16 11:55:26 -0600 (Tue, 16 Feb 2010) | 3 lines
Make the references to Popen in the description of Call
and check_call into links.
........
r78216 | andrew.kuchling | 2010-02-18 08:16:48 -0600 (Thu, 18 Feb 2010) | 1 line
Add various items
........
r78296 | andrew.kuchling | 2010-02-21 20:08:45 -0600 (Sun, 21 Feb 2010) | 1 line
Re-word
........
r78297 | andrew.kuchling | 2010-02-21 20:29:10 -0600 (Sun, 21 Feb 2010) | 1 line
#7076: mention SystemRandom class near start of the module docs; reword change description for clarity. Noted by Shawn Ligocki.
........
r78328 | jack.diederich | 2010-02-22 12:17:16 -0600 (Mon, 22 Feb 2010) | 1 line
fixes issue #7530, serve_forever()
........
r78331 | andrew.kuchling | 2010-02-22 12:38:23 -0600 (Mon, 22 Feb 2010) | 1 line
Fix comment typo
........
r78332 | andrew.kuchling | 2010-02-22 12:42:07 -0600 (Mon, 22 Feb 2010) | 2 lines
#7627: MH.remove() would fail if the MH mailbox was locked;
it would call _unlock_file() and pass it a closed file object. Noted by Rob Austein.
........
r78336 | jack.diederich | 2010-02-22 13:55:22 -0600 (Mon, 22 Feb 2010) | 1 line
fixes issue #1522237, bad init check in _threading_local
........
r78339 | jack.diederich | 2010-02-22 15:27:38 -0600 (Mon, 22 Feb 2010) | 1 line
* fix issue#7476
........
r78343 | andrew.kuchling | 2010-02-22 16:48:41 -0600 (Mon, 22 Feb 2010) | 10 lines
#2560: remove an unnecessary 'for' loop from my_fgets() in Parser/myreadline.c.
Noted by Joseph Armbruster; patch by Jessica McKellar.
The original code was 'for (;;) {...}', where ... ended
with a 'return -2' statement and did not contain a 'break' or 'continue'
statement. Therefore, the body of the loop is always executed once.
Once upon a time there was a 'continue' in the loop, but it was removed in
rev36346, committed by mwh on Wed Jul 7 17:44:12 2004.
........
r78378 | jack.diederich | 2010-02-23 11:23:30 -0600 (Tue, 23 Feb 2010) | 1 line
fixup markup error
........
r78379 | jack.diederich | 2010-02-23 13:34:06 -0600 (Tue, 23 Feb 2010) | 1 line
issue#6442 use in operator instead of has_key
........
r78415 | dirkjan.ochtman | 2010-02-23 22:00:52 -0600 (Tue, 23 Feb 2010) | 1 line
Issue #7733: add explicit reference in asyncore docs.
........
r78559 | andrew.kuchling | 2010-03-01 13:45:21 -0600 (Mon, 01 Mar 2010) | 1 line
#7637: update discussion of minidom.unlink() and garbage collection
........
r78717 | benjamin.peterson | 2010-03-05 21:13:33 -0600 (Fri, 05 Mar 2010) | 1 line
settscdump is definitely an implementation detail
........
r78791 | andrew.kuchling | 2010-03-08 06:00:39 -0600 (Mon, 08 Mar 2010) | 1 line
Add various items
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r72213 | andrew.kuchling | 2009-05-02 15:17:28 -0400 (Sat, 02 May 2009) | 3 lines
#1607951: Make mailbox.Maildir re-read the directories less frequently.
This is done by recording the current time -1sec, and not re-reading unless
the directory mod. times are >= the recorded time.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r65459 | gregory.p.smith | 2008-08-04 00:13:29 +0000 (Mon, 04 Aug 2008) | 4 lines
- Issue #1857: subprocess.Popen.poll gained an additional _deadstate keyword
argument in python 2.5, this broke code that subclassed Popen to include its
own poll method. Fixed my moving _deadstate to an _internal_poll method.
........
r65472 | andrew.kuchling | 2008-08-04 01:43:43 +0000 (Mon, 04 Aug 2008) | 3 lines
Bug 3228: Explicitly supply the file mode to avoid creating executable files,
and add corresponding tests.
Possible 2.5 backport candidate
........
r65481 | gregory.p.smith | 2008-08-04 07:33:37 +0000 (Mon, 04 Aug 2008) | 22 lines
Adds a sanity check to avoid a *very rare* infinite loop due to a corrupt tls
key list data structure in the thread startup path.
This change is a companion to r60148 which already successfully dealt with a
similar issue on thread shutdown.
In particular this loop has been observed happening from this call path:
#0 in find_key ()
#1 in PyThread_set_key_value ()
#2 in _PyGILState_NoteThreadState ()
#3 in PyThreadState_New ()
#4 in t_bootstrap ()
#5 in pthread_start_thread ()
I don't know how this happens but it does, *very* rarely. On more than
one hardware platform. I have not been able to reproduce it manually.
(A flaky mutex implementation on the system in question is one hypothesis).
As with r60148, the spinning we managed to observe in the wild was due to a
single list element pointing back upon itself.
........
r65518 | mark.dickinson | 2008-08-04 21:30:09 +0000 (Mon, 04 Aug 2008) | 7 lines
Issue #1481296: (again!) Make conversion of a float NaN to an int or
long raise ValueError instead of returning 0. Also, change the error
message for conversion of an infinity to an integer, replacing 'long' by
'integer', so that it's appropriate for both long(float('inf')) and
int(float('inf')).
........
r65536 | andrew.kuchling | 2008-08-05 01:00:57 +0000 (Tue, 05 Aug 2008) | 1 line
Bug 3228: take a test from Niels Gustaebel's patch, and based on his patch, check for having os.stat available
........
r65581 | guido.van.rossum | 2008-08-07 18:51:38 +0000 (Thu, 07 Aug 2008) | 3 lines
Patch by Ian Charnas from issue 3517.
Add F_FULLFSYNC if it exists (OS X only so far).
........
r65609 | antoine.pitrou | 2008-08-09 17:22:25 +0000 (Sat, 09 Aug 2008) | 3 lines
#3205: bz2 iterator fails silently on MemoryError
........
r65637 | georg.brandl | 2008-08-11 09:07:59 +0000 (Mon, 11 Aug 2008) | 3 lines
- Issue #3537: Fix an assertion failure when an empty but presized dict
object was stored in the freelist.
........
r65641 | jesse.noller | 2008-08-11 14:28:07 +0000 (Mon, 11 Aug 2008) | 2 lines
Remove the fqdn call for issue 3270
........
r65644 | antoine.pitrou | 2008-08-11 17:21:36 +0000 (Mon, 11 Aug 2008) | 3 lines
#3134: shutil referenced undefined WindowsError symbol
........
r65645 | jesse.noller | 2008-08-11 19:00:15 +0000 (Mon, 11 Aug 2008) | 2 lines
Fix the connection refused error part of issue 3419, use errno module instead of a static list of possible connection refused messages.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r62021 | benjamin.peterson | 2008-03-28 18:11:01 -0500 (Fri, 28 Mar 2008) | 2 lines
NIL => NULL
........
r62029 | amaury.forgeotdarc | 2008-03-28 20:42:31 -0500 (Fri, 28 Mar 2008) | 3 lines
Correctly call the base class tearDown();
otherwise running test_logging twice produce the errors we see on all buildbots
........
r62035 | raymond.hettinger | 2008-03-29 05:42:07 -0500 (Sat, 29 Mar 2008) | 1 line
Be explicit about what efficient means.
........
r62036 | georg.brandl | 2008-03-29 06:46:18 -0500 (Sat, 29 Mar 2008) | 2 lines
Fix capitalization.
........
r62037 | amaury.forgeotdarc | 2008-03-29 07:42:54 -0500 (Sat, 29 Mar 2008) | 5 lines
lib2to3 should install a logging handler only when run as a main program,
not when used as a library.
This may please the buildbots, which fail when test_lib2to3 is run before test_logging.
........
r62043 | benjamin.peterson | 2008-03-29 10:24:25 -0500 (Sat, 29 Mar 2008) | 3 lines
#2503 make singletons compared with "is" not == or !=
Thanks to Wummel for the patch
........
r62044 | gerhard.haering | 2008-03-29 14:11:52 -0500 (Sat, 29 Mar 2008) | 2 lines
Documented the lastrowid attribute.
........
r62052 | benjamin.peterson | 2008-03-30 14:35:10 -0500 (Sun, 30 Mar 2008) | 2 lines
Updated README regarding doc formats
........
r62053 | georg.brandl | 2008-03-30 14:41:39 -0500 (Sun, 30 Mar 2008) | 2 lines
The other download formats will be available for 2.6 too.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r61913 | benjamin.peterson | 2008-03-25 22:14:42 +0100 (Tue, 25 Mar 2008) | 2 lines
Merged the ACKS from py3k
........
r61915 | thomas.heller | 2008-03-25 22:18:39 +0100 (Tue, 25 Mar 2008) | 1 line
Make _ctypes.c PY_SSIZE_T_CLEAN.
........
r61916 | benjamin.peterson | 2008-03-25 22:55:50 +0100 (Tue, 25 Mar 2008) | 3 lines
Opps! I merged the revisions, but forgot to add
the header to ACKS
........
r61918 | andrew.kuchling | 2008-03-26 01:16:50 +0100 (Wed, 26 Mar 2008) | 1 line
Minor docstring typos
........
r61919 | andrew.kuchling | 2008-03-26 01:30:02 +0100 (Wed, 26 Mar 2008) | 1 line
Add various items
........
r61922 | neal.norwitz | 2008-03-26 05:55:51 +0100 (Wed, 26 Mar 2008) | 6 lines
Try to get this test to be less flaky. It was failing sometimes because
the connect would succeed before the timeout occurred. Try using an
address and port that hopefully doesn't exist to ensure we get no response.
If this doesn't work, we can use a public address close to python.org
and hopefully that address never gets taken.
........
r61923 | jerry.seutter | 2008-03-26 06:03:03 +0100 (Wed, 26 Mar 2008) | 1 line
Changed test so it no longer runs as a side effect of importing.
........
r61924 | neal.norwitz | 2008-03-26 06:19:41 +0100 (Wed, 26 Mar 2008) | 5 lines
Ensure that the mailbox is closed to prevent problems on Windows with removing
an open file. This doesn't seem to be a problem in 2.6, but that appears
to be somewhat accidental (specific to reference counting). When this
gets merged to 3.0, it will make the 3.0 code simpler.
........
r61925 | jerry.seutter | 2008-03-26 06:32:51 +0100 (Wed, 26 Mar 2008) | 1 line
Changed test so it no longer runs as a side effect of importing.
........
r61926 | jerry.seutter | 2008-03-26 06:58:14 +0100 (Wed, 26 Mar 2008) | 1 line
Changed test so it no longer runs as a side effect of importing.
........
r61928 | georg.brandl | 2008-03-26 10:04:36 +0100 (Wed, 26 Mar 2008) | 2 lines
Add Josiah.
........
r61929 | georg.brandl | 2008-03-26 10:32:46 +0100 (Wed, 26 Mar 2008) | 2 lines
Add an example for an RFC 822 continuation.
........
r61931 | benjamin.peterson | 2008-03-26 12:57:47 +0100 (Wed, 26 Mar 2008) | 2 lines
Added help options to PDB
........
r61935 | christian.heimes | 2008-03-26 13:32:49 +0100 (Wed, 26 Mar 2008) | 1 line
Prepare integration of bytearray backport branch
........
r61938 | christian.heimes | 2008-03-26 13:50:43 +0100 (Wed, 26 Mar 2008) | 3 lines
Removed merge tracking for "svnmerge" for
svn+ssh://pythondev@svn.python.org/python/branches/trunk-bytearray
........
r61943 | georg.brandl | 2008-03-26 13:57:47 +0100 (Wed, 26 Mar 2008) | 2 lines
Fix and simplify error handling, silencing a compiler warning.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r60553 | neal.norwitz | 2008-02-03 17:53:09 +0100 (Sun, 03 Feb 2008) | 1 line
Ignore leaky warnings from test_asynchat
........
r60555 | christian.heimes | 2008-02-03 20:51:13 +0100 (Sun, 03 Feb 2008) | 1 line
Another int -> pid_t case
........
r60560 | amaury.forgeotdarc | 2008-02-03 23:51:43 +0100 (Sun, 03 Feb 2008) | 6 lines
Ensure that PySet_Add() operates on a newly created frozenset, like PyTuple_SetItem does.
Add PyFrozenSet_Check(), which was not needed before; The list of Py*Set_Check* macros seems to be complete now.
Add missing NEWS entries about all this.
........
r60563 | amaury.forgeotdarc | 2008-02-04 00:14:32 +0100 (Mon, 04 Feb 2008) | 2 lines
Nasty typo in setobject.h
........
r60564 | amaury.forgeotdarc | 2008-02-04 00:15:32 +0100 (Mon, 04 Feb 2008) | 3 lines
Correct test_mailbox on win32: since the test sets a custom 'colon' attribute
to the main mailbox, copy it to secondary mailbox instances.
........
r60565 | amaury.forgeotdarc | 2008-02-04 00:57:24 +0100 (Mon, 04 Feb 2008) | 2 lines
Let test_socketserver pass on win32, which does not have AF_UNIX sockets.
........
r60566 | jeffrey.yasskin | 2008-02-04 02:04:35 +0100 (Mon, 04 Feb 2008) | 2 lines
Make int() and long() fall back to __trunc__(). See issue 2002.
........
r60567 | christian.heimes | 2008-02-04 19:00:12 +0100 (Mon, 04 Feb 2008) | 3 lines
Patch #1953
I implemented the function sys._compact_freelists() and C API functions PyInt_/PyFloat_CompactFreeList() to compact the pre-allocated blocks of ints and floats. They allow the user to reduce the memory usage of a Python process that deals with lots of numbers.
The patch also renames sys._cleartypecache to sys._clear_type_cache
........
R David Murray
Vinay Sajip
Charles-François Natali
Petri Lehtinen
Victor Stinner
Marc-André Lemburg
Brett Cannon
Brian Curtin
Benjamin Peterson
Ezio Melotti
Antoine Pitrou
Georg Brandl
Alexandre Vassalotti
Andrew M. Kuchling
Amaury Forgeot d'Arc
Christian Heimes