__init__.py it isn't read. (Sjoerd just came up with this, so it's
not heavily tested.)
Other (yet unsolved) package problems noted by Sjoerd:
- If you have a package and a module inside that or another package
with the same name, module caching doesn't work properly since the
key is the base name of the module/package.
- The only entry that is returned when you readmodule a package is a
__path__ whose value is a list which confuses certain class browsers
that I wrote. (Hm, this could be construed as a feature.)
I've found two places where smtplib.py sends an extra trailing space
on command lines to the SMTP server. I don't know if this ever causes
any problems, but I'd prefer to be on the safe side. The enclosed
patch removes the extra space.
all processing instruction target names containing 'xml' were
rejected, instead (as the standard rejects) only the name 'xml' itself
(or case variants thereof).
I guess in 1.5.2 a new module, whichdb, was added that attempts to
divine the nature of a database file. This module doesn't know anything
about Berkeley DB v2 files. In v2, Sleepycat added a 12-byte null pad
in front of the old magic numbers (at least for hash and btree files).
I've been using v2 for awhile and upgrading to 1.5.2 broke all my
anydbm.open calls. I believe the following patch corrects the problem.
appreciably. Triple-quoted strings no longer confuse it, nor nested
classes or defs, nor comments starting in column 1. Chews thru
Tkinter.py in < 3 seconds for me; doctest.py no longer confuses it; no
longer missing methods in PyShell.py; etc. Also captures defs
starting in column 1 now, but ignores them; an interface should be
added so that IDLE's class browser can show the top-level functions
too.
'install_site_lib' and install_site_platlib' on non-POSIX platforms.
Should at least work for NT, as this is adopted from Amos Latteier's NT
patches. Also added extensive comments bitching about the inadequacy of
the current model, both under POSIX and NT (and probably other) systems.
'run_command()' to refer to it before attempting to run a command --
that way, command classes can freely invoke other commands without fear
of duplicate execution.
Beefed up some comments and docstrings.
It wasn't hard to speed pyclbr by a factor of 3, and I'll attach an
experimental patch for that (experimental because barely tested). Uncomment
the new "String" stuff and it will deal with strings correctly (pyclbr
currently ignores the possibility), but that slows it down a lot. Still
faster in the end than current pyclbr, but-- frankly --I'd rather have the
dramatic speedup!
content-type to application/x-www-form-urlencoded only when the method
is POST. Ditto for when the content-type is unrecognized -- only
fall back to urlencoded with POST.
I noticed while watching (with lsof) my forking SocketServer app running
that I would get multiple processes listening to the socket. For the most
part, this doesn't hurt things, but if you terminate the server, this can
prevent it from restarting because it cannot bind to the port due to any
running children which also have the socket open. The following one-liner
fixes this.
meaningful return values: respectively, whether the copy was done, and
the list of files that were copied. This meant some trivial changes in
core.py as well: the Command methods that mirror 'copy_file()' and
'copy_tree()' have to pass on their return values.
of the 'install_py' command rather than 'build_py'. Obviously, this
meant that the 'build_py' and 'install_py' modules had to change; less
obviously, so did 'install' and 'build', since these higher-level
commands must make options available to control the lower-level
commands, and some compilation-related options had to migrate with the
code.
(1) Fix reference to pwd.error to be KeyError -- there is no pwd.error
and pwd.getpwnam() raises KeyError on failure.
(2) Add cookie support, by placing the 'Cookie:' header, if present,
in the HTTP_COOKIE environment variable.
Two problems: The SMTPRecipientsRefused class should not inherit
SMTPResponseException, since it doesn't provide the smtp_code and
smtp_error attributes. My patch for not adding an extra CRLF was
apparently forgotten. The enclosed patch fixes these two problems.
terminated; this makes the final assert in the self-test code fail if
the parent runs faster than the children. Fix this by calling wait()
on the remaining children instead.
1. Jack Jansen reports that on the Mac, the time may be negative, and
solves this by adding a write32u() function that writes an unsigned
long.
2. On 64-bit platforms the CRC comparison fails; I've fixed this by
casting both values to be compared to "unsigned long" i.e. modulo
0x100000000L.
unsupported format string. (I guess this is because the logic for
deciding whether to reallocate the buffer or not has been improved.)
This caused the test code to crash on result[0]. Fix this by assuming
an empty result also means the format is not supported.
than was worth it: when deleting a canvas item, it would try to
automatically delete the bindings for that item. Since there's
nothing that says you can't reuse the tag and still have the bindings,
this is not correct. Also, it broke at least one demo
(Demo/tkinter/matt/rubber-band-box-demo-1.py).
so the preferred name for them is tag_lower, tag_raise
(similar to tag_bind, and similar to the Text widget);
unfortunately can't delete the old ones yet (maybe in 1.6)
Per writes:
"""
The application where Signum Support uses smtplib needs to be able to
report good error messages to the user when sending email fails. To
help in diagnosing problems it is useful to be able to report the
entire message sent by the server, not only the SMTP error code of the
offending command.
A lot of the functions in sendmail.py unfortunately discards the
message, leaving only the code. The enclosed patch fixes that
problem.
The enclosed patch also introduces a base class for exceptions that
include an SMTP error code and error message, and make the code and
message available on separate attributes, so that surrounding code can
deal with them in whatever way it sees fit. I've also added some
documentation to the exception classes.
The constructor will now raise an exception if it cannot connect to
the SMTP server.
The data() method will raise an SMTPDataError if it doesn't receive
the expected 354 code in the middle of the exchange.
According to section 5.2.10 of RFC 1123 a smtp client must accept "any
text, including no text at all" after the error code. If the response
of a HELO command contains no text self.helo_resp will be set to the
empty string (""). The patch fixes the test in the sendmail() method
so that helo_resp is tested against None; if it has the empty string
as value the sendmail() method would invoke the helo() method again.
The code no longer accepts a -1 reply from the ehlo() method in
sendmail().
[Text about removing SMTPRecipientsRefused deleted --GvR]
"""
and also:
"""
smtplib.py appends an extra blank line to the outgoing mail if the
`msg' argument to the sendmail method already contains a trailing
newline. This patch should fix the problem.
"""
The Dragon writes:
"""
Mostly I just re-added the SMTPRecipientsRefused exception
(the exeption object now has the appropriate info in it ) [Per had
removed this in his patch --GvR] and tweaked the behavior of the
sendmail method whence it throws the newly added SMTPHeloException (it
was closing the connection, which it shouldn't. whatever catches the
exception should do that. )
I pondered the change of the return values to tuples all around,
and after some thinking I decided that regularizing the return values was
too much of the Right Thing (tm) to not do.
My one concern is that code expecting an integer & getting a tuple
may fail silently.
(i.e. if it's doing :
x.somemethod() >= 400:
expecting an integer, the expression will always be true if it gets a
tuple instead. )
However, most smtplib code I've seen only really uses the
sendmail() method, so this wouldn't bother it. Usually code I've seen
that calls the other methods usually only calls helo() and ehlo() for
doing ESMTP, a feature which was not in the smtplib included with 1.5.1,
and thus I would think not much code uses it yet.
"""
splitunc() parses UNC paths. The contributor of the UNC parsing in
splitdrive() doesn't like it, but I haven't heard a good reason to
keep it, and it causes some problems. (I think there's a
philosophical problem -- to me, the split*() functions are purely
syntactical, and the fact that \\foo is not a valid path doesn't mean
that it shouldn't be considered an absolute path.)
Also (quite separately, but strangely related to the philosophical
issue above) fix abspath() so that if win32api exists, it doesn't fail
when the path doesn't actually exist -- if GetFullPathName() fails,
fall back on the old strategy (join with getcwd() if neccessary, and
then use normpath()).
and dry-run flags consistently painless): 'execute()', 'mkpath()',
'copy_file()', 'copy_tree()', 'make_file()', and stub for 'make_files()'
(not sure yet if it's useful).
that wrap them in the Command class).
Fixed 'copy_file()' to use '_copy_file_contents()', not 'copyfile()'
from shutil module -- no reference to shutil anymore.
Added "not copying" announcement in 'copy_file()'.
Wee comment fix.
If you send something like "PUT / HTTP/1.0" to something derived from
BaseHTTPServer that doesn't define do_PUT, you will get a response
that begins like this:
HTTP/1.0 501 Unsupported method ('do_PUT')
Server: SimpleHTTP/0.3 Python/1.5
Date: Tue, 30 Mar 1999 18:53:53 GMT
The server should complain about 'PUT' instead of 'do_PUT'. This
patch should fix the problem.
"""
- It needlessly used the makefile() method for each response that is
read from the SMTP server.
- If the remote SMTP server closes the connection unexpectedly the
code raised an IndexError. It now raises an SMTPServerDisconnected
exception instead.
- The code now checks that all lines in a multiline response actually
contains an error code.
"""
The Dragon approves.
allow using the 'a' flag as a mode for opening a GzipFile. gzip
files, surprisingly enough, can be concatenated and then decompressed;
the effect is to concatenate the two chunks of data.
If we support it on writing, it should also be supported on reading.
This *wasn't* trivial, and required rearranging the code in the
reading path, particularly the _read() method.
Raise IOError instead of RuntimeError in two cases, 'Not a gzipped file'
and 'Unknown compression method'
If a filename on Windows starts with \\, it is converted to a URL
which starts with ////. If this URL is passed to urlparse.urlparse
you get a path that starts with // (and an empty netloc). If you pass
the result back to urlparse.urlunparse, you get a URL that starts with
//, which is parsed differently by urlparse.urlparse. The fix is to
add the (empty) netloc with accompanying slashes if the path in
urlunparse starts with //. Do this for all schemes that use a netloc.
Pathnames of files on other hosts in the same domain
(\\host\path\to\file) are not translated correctly to URLs and back.
The URL should be something like file:////host/path/to/file.
Note that a combination of drive letter and remote host is not
possible.
netloc from the base url as the default netloc for the resulting url
even if the schemes differ.
Once upon a time, when the web was wild, this was a valuable hack
because some people had a URL referencing an ftp server colocated with
an http server without having the host in the ftp URL (so they could
replicate it or change the hostname easily).
More recently, after the file: scheme got added back to the list of
schemes that accept a netloc, it turns out that this caused weirdness
when joining an http: URL with a file: URL -- the resulting file: URL
would always inherit the host from the http: URL because the file:
scheme supports a netloc but in practice never has one.
There are two reasons to get rid of the old, once-valuable hack,
instead of removing the file: scheme from the uses_netloc list. One,
the RFC says that file: uses the netloc syntax, and does not endorse
the old hack. Two, neither netscape 4.5 nor IE 4.0 support the old
hack.
An attempt to execute grid_slaves with arguments (0,0) results in
*all* of the slaves being returned, not just the slave associated with
row 0, column 0. This is because the test for arguments in the method
does not test to see if row (and column) does not equal None, but
rather just whether is evaluates to non-false. A value of 0 fails
this test.
The module cmd requires for each do_xxx command a help_xxx
function. I think this is a little old fashioned.
Here is a patch: use the docstring as help if no help_xxx
function can be found.
[I'm tempted to rip out all the help_* functions from pdb, but I'll
resist it. Any takers? --Guido]
urlopen is used to specify form data, make sure the second argument is
threaded through all of the http_error_NNN calls. This allows error
handlers like the redirect and authorization handlers to properly
re-start the connection.
o the initial comment is wrong: creating messages is already
implemented
o Message.getbodytext: if the mail or it's part contains an
empty content-transfer-encoding header, the code used to
break; the change below treats an empty encoding value the same
as the other types that do not need decoding
o SubMessage.getbodytext was missing the decode argument; the
change below adds it; I also made it unconditionally return
the raw text if decoding was not desired, because my own
routines needed that (and it was easier than rewriting my
own routines ;-)
+ Implements a put_nowait method.
+ Adds a corresponding Queue.Full exception.
+ Simplifies the implementation by adding optional "block" args to get() and
put(), and makes the old get_nowait() and new put_nowait() one-line
redirections to get() and put().
+ Uses (much) simpler logic for the nowait cases.
+ Regularizes the doc strings to something closer to "Guido style" <wink>.
+ Converts two stray tabs into spaces.
+ Removes confusing verbiage about the queue "not being available" from the
docstrings -- never knew what that meant as a user, and after digging into
the implementation still didn't know what it was trying to say.
Also finally get rid of some obsolete commented-out access statements.
A note about the previous checkin: I believe it's correct, but I found
something strange: the file Lib/test/audiotest.au in the Python
distribution was evidently encoded in u-LAW format but had its
encoding set to 2, i.e. linear-8. I hope that this is a mistake
caused by some conversion program that produced this .au file; I just
found it on a website.
Fix leaking of instances by removing the elements variable that we
created on closing the parser. The elements variable is now created
in the reset() method, so that the sequence close(); reset();
... works.
Also, add the name of the entity reference that wasn't found to the
error message.
from Python 1.5.1:
If after __init__ finishes no new elements variable was created, this
patch will search the instance's namespace for all attributes whose
name start with start_ or end_ and put their value in a new elements
instance variable.
In the docstring of ConfigParser.py (Python 1.5.2b1):
read(*filenames) -- read and parse the list of named configuration files
should be:
read(filenames) -- read and parse the list of named configuration files
The method accepts a list, not a bunch of positional arguments.
Which is good, the list is much more convenient.
applied to all filenames before they are compared, looked up in the
breaks dictionary, etc. The default implementation does nothing --
it's implented as fast as possible via str(). A useful implementation
would make everything a absolute, e.g. return os.path.normcase(
os.path.abspath(filename)).
module myself) to accept an option keyword argument (vars) that is
substituted on top of the defaults that were setup in __init__. The
patch also fixes the problem where you can't have recusive references
inside your configuration file.
clear
clear file:line
clear bpno bpno ...
Also print the breakpoint data after calling set_break(), because the
print statement in set_break() has gone.
Add new clear_bpbynumber() with single bpno argument. (Adapted from
a patch by Richard Wolff.)
Also some cleanup in error messages and moved some comments into a
docstring.
named header, so that if a message has, e.g. multiple CC: lines, all
will get returned by the call to getaddrlist(). It also correctly
handles addresses which show up in continuation lines.
AdderlistClass.__init__(): Added \n to self.CR which fixes a bug that
sometimes, an address would contain a bogus trailing newline.
Message.getaddress(): In final else clause, added a test for the
character we're at being in self.specials. Without this, such
characters never get consumed and we infloop. Case in point (as
posted to c.l.py):
To: <[smtp:dd47@mail.xxx.edu]_at_hmhq@hdq-mdm1-imgout.companay.com>
----------------------------^
otherwise we'd infloop here
text/plain for inner parts, but application/x-www-form-urlencoded
for outer parts. Honor any existing content-type header.
Lower down, if the content-type header is something we don't
understand (say because it there was a typo in the header coming from
the client), default to text/plain for inner parts, but
application/x-www-form-urlencoded for outer parts.
in autoexec.bat in order to find the Tcl DLLs -- Tkinter calls FixTk
which will hunt around in a few common places and then set PATH
and try again, or else issue a big clarifying error message.
Extended the rfc822 parsedate routines to handle the cases they failed
on in an archive of ~37,000 messages. I believe the changes are
compatible, in that all previously correct parsing are still correct.
[I still see problems with some messages, but no showstoppers.]
# Message to all python-checkins readers: we have a problem with the
# CVS mirroring software. You can't check out the latest changes yet.
# We hope to have fixed this by noon EST today.
"""
The message ID is returned lowercased and there is no way to access
the original ID the server sent. Now at least some news servers
are very picky about the case of the ID and return errors when
fetching articles with mixed case given a lowercased version
of the ID.
The solution is simple: remove the string.lower() call.
"""
(I might add that the lowercasing was probably introduced as a result
of sloppy copy-and-paste coding; there's a string.lower in a similar
piece of code a bit higher in the source, that makes more sense --
it's lowercasing the group name.)
yours, please let me know for propoer acknowledgement.)
This avoids recompiling files that haven't changed; it adds a -f
option to force recompilation.
- Fixed a bug where a syntax error was reported when a document
started with white space. (White space at the start of a document
is valid if there is no XML declaration.)
- Improved the speed quite a bit for documents that don't make use of
namespaces.
Here is my current version of xmllib.py and the documentation. This
version has some API changes with respect to the version currently in
Python (also the one in 1.5.2a).
This version supports XML namespaces.
File names with "funny" characters get translated wrong by
pathname2url (any variety). E.g. the (Unix) file "/ufs/sjoerd/#tmp"
gets translated into "/ufs/sjoerd/#tmp" which, when interpreted as a
URL is file "/ufs/sjoerd/" with fragment ID "tmp".
Here's an easy fix. (An alternative fix would be to change the
various implementations of pathname2url and url2pathname to include
calls to quote and unquote.
[The main problem is with the normal use of URLs:
url = url2pathname(file)
transmit url
url, tag = splittag(url)
urlopen(url)
]
In addition, this patch fixes some uses of unquote:
- the host part of URLs should be unquoted
- the file path in the FTP URL should be unquoted before it is split
into components.
- because of the latter, I removed all unquoting from ftpwrapper,
and moved it to the caller, but that is not essential
when we create a recursive instance, by setting the class variable
'FieldStorageClass' to the desired class. By default, this is set to
None, in which case we use self.__class__ (as before).
When literal mode is entered it should exit automatically when the
matching close tag of the last unclosed open tag is encountered. This
patch fixes this.
In SimpleHTTPServer.py, the server specified in test() should
be BaseHTTPServer.HTTPServer, in case the request handler should
want to reference the two attributes added by
BaseHTTPServer.server_bind:
self.server_name = hostname
self.server_port = port
There was some Bobo CGI code that wanted access to those attributes.
In CGIHTTPServer.py, the list of acceptable formats is -split-
on spaces but -joined- on commas, resulting in double commas
in the joined text. It appears harmless to my browser but
ought to be fixed anyway.
'A, B, C' -> 'A,', 'B,', 'C,' -> 'A,,B,,C'
Because it might be a common mistake to pass a single string, this
situation is treated separately.
Since we were making a copy of the longopts list anyway, we now use
the list() function -- this made it necessary to change all uses of
the local variable (and argument) 'list' to something more meaningful,
i.e., 'opts'.
Also added docstrings (copied from the library manual) and removed the
(now redundant) module comments.
filenames generated are easily predictable, it is possible to trick an
unsuspecting program into overwriting another file by creating a
symbolic link with the predicted name. Fix this by using the
low-level os.open() function with the O_EXCL flag and mode 0700. On
non-Unix platforms, presumably there are no symbolic links so the
problem doesn't exist. The explicit test for Unix (posix, actually)
makes it possible to change the non-Unix logic to work without a
try-except clause.
The mktemp() file is as unsafe as ever.
"""
I've attached a long overdue patch to pickle.py to bring it to format
1.3, which is the same as 1.2 except that the binary float format
is supported. This is done using the new platform-indepent format
features of struct.
This patch also gets rid of the undocumented obsolete Pickler
dump_special method.
"""
"""
Jochen Hayek has reported a problem with some versions of IMAP4
servers that choose to mix the case in their CAPABILITIES response.
The patch below fixes the problem.
"""
"""
The FieldStorage constructor calls the read_multi method. The read_multi
method creates new FieldStorage objects, re-invoking the constructor
(on the new objects). The problem is that the 'environ', 'keep_blank_values',
and 'strict_parsing' arguments originally passed to the constructor are not
propigated to the new object constructors. This causes os.environ to be used,
leading to a miss-handling of the parts.
I fixed this by passing these arguments to read_multi and then on to the
constructor. See the context diff below.
"""
Guido van Rossum
Greg Ward
Fred Drake
Andrew M. Kuchling
Jeremy Hylton
Barry Warsaw