that are suspended outside of any try/except/finally blocks to be
garbage collected even if they are part of a cycle. Generators that
suspend inside of an active try/except or try/finally block (including
those created by a ``with`` statement) are still not GC-able if they
are part of a cycle, however.
Re-enable all the tests in test_trace.py except one. Still not sure that these tests test what they used to test, but they pass. One failing test seems to be caused by undocumented line number table behavior in Python 2.4.
tracing/line number table in except blocks.
Reflow long lines introduced by col_offset changes. Update test_ast
to handle new fields in excepthandler.
As note in Python.asdl says, we might want to rethink how attributes
are handled. Perhaps they should be the same as other fields, with
the primary difference being how they are defined for all types within
a sum.
Also fix asdl_c so that constructors with int fields don't fail when
passed a zero value.
Explicitly clear all elements from arena->a_objects and remove
assert() that refcount is 1. It's possible for a program to get a
reference to the list via sys.getobjects() or via gc functions.
def foo((x)): was getting recognized as requiring tuple unpacking
which is not correct.
Add tests for this case and the proper way to unpack a tuple of one:
def foo((x,)):
test_inpsect was incorrect before. I'm not sure why it was passing,
but that has been corrected with a test for both functions above.
This means the test (and therefore inspect.getargspec()) are broken in 2.4.
objimpl.h, pymem.h: Stop mapping PyMem_{Del, DEL} and PyMem_{Free, FREE}
to PyObject_{Free, FREE} in a release build. They're aliases for the
system free() now.
_subprocess.c/sp_handle_dealloc(): Since the memory was originally
obtained via PyObject_NEW, it must be released via PyObject_FREE (or
_DEL).
pythonrun.c, tokenizer.c, parsermodule.c: I lost count of the number of
PyObject vs PyMem mismatches in these -- it's like the specific
function called at each site was picked at random, sometimes even with
memory obtained via PyMem getting released via PyObject. Changed most
to use PyObject uniformly, since the blobs allocated are predictably
small in most cases, and obmalloc is generally faster than system
mallocs then.
If extension modules in real life prove as sloppy as Python's front
end, we'll have to revert the objimpl.h + pymem.h part of this patch.
Note that no problems will show up in a debug build (all calls still go
thru obmalloc then). Problems will show up only in a release build, most
likely segfaults.
This will hopefully get rid of some Coverity warnings, be a hint to
developers, and be marginally faster.
Some asserts were added when the type is currently known, but depends
on values from another function.
PyCodec_IncrementalDecoder().
Factor out common code from PyCodec_Encoder()/PyCodec_Decoder(),
PyCodec_IncrementalEncoder()/PyCodec_IncrementalDecoder() and
PyCodec_StreamReader()/PyCodec_StreamWriter().
of tuple) that provides incremental decoders and encoders (a way to use
stateful codecs without the stream API). Functions
codecs.getincrementaldecoder() and codecs.getincrementalencoder() have
been added.
Anyway, this is the changes to the with-statement
so that __exit__ must return a true value in order
for a pending exception to be ignored.
The PEP (343) is already updated.
added message attribute compared to the previous version of Exception. It is
also a new-style class, making all exceptions now new-style. KeyboardInterrupt
and SystemExit inherit from BaseException directly. String exceptions now
raise DeprecationWarning.
Applies patch 1104669, and closes bugs 1012952 and 518846.
- New semantics for __exit__() -- it must re-raise the exception
if type is not None; the with-statement itself doesn't do this.
(See the updated PEP for motivation.)
- Added context managers to:
- file
- thread.LockType
- threading.{Lock,RLock,Condition,Semaphore,BoundedSemaphore}
- decimal.Context
- Added contextlib.py, which defines @contextmanager, nested(), closing().
- Unit tests all around; bot no docs yet.
- IMPORT_NAME takes an extra argument from the stack: the relativeness of
the import. Only passed to __import__ when it's not -1.
- __import__() takes an optional 5th argument for the same thing; it
__defaults to -1 (old semantics: try relative, then absolute)
- 'from . import name' imports name (be it module or regular attribute)
from the current module's *package*. Likewise, 'from .module import name'
will import name from a sibling to the current module.
- Importing from outside a package is not allowed; 'from . import sys' in a
toplevel module will not work, nor will 'from .. import sys' in a
(single-level) package.
- 'from __future__ import absolute_import' will turn on the new semantics
for import and from-import: imports will be absolute, except for
from-import with dots.
Includes tests for regular imports and importhooks, parser changes and a
NEWS item, but no compiler-package changes or documentation changes.
In a Windows debug build, trying to open a file using
an empty string as the name causes assertion death
inside MS's C runtime code. We probably need to worm
around that in many places. I'm worming around it here
to stop the new test_with.py from assert-dying in the
Windows debug build (it calls compile() with an empty
string for "the file name", which indirectly leads to
C-level code in Python trying to fopen("", "r")).
This was started by Mike Bland and completed by Guido
(with help from Neal).
This still needs a __future__ statement added;
Thomas is working on Michael's patch for that aspect.
There's a small amount of code cleanup and refactoring
in ast.c, compile.c and ceval.c (I fixed the lltrace
behavior when EXT_POP is used -- however I had to make
lltrace a static global).
PyThreadState_Delete(): if the auto-GIL-state machinery knows about
the thread state, forget it (since the thread state is being deleted,
continuing to remember it can't help, but can hurt if another thread
happens to get created with the same thread id).
I'll backport to 2.4 next.
breaks the parser module, because it adds the if/else construct as well as
two new grammar rules for backward compatibility. If no one else fixes
parsermodule, I guess I'll go ahead and fix it later this week.
The TeX code was checked with texcheck.py, but not rendered. There is
actually a slight incompatibility:
>>> (x for x in lambda:0)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: iteration over non-sequence
changes into
>>> (x for x in lambda: 0)
File "<stdin>", line 1
(x for x in lambda: 0)
^
SyntaxError: invalid syntax
Since there's no way the former version can be useful, it's probably a
bugfix ;)
Expand set of errors caught in set_context(). Some new errors, some
old error messages changed for consistency.
Fixed error checking in generator expression code. The first set of
tests were impossible condition given the grammar. In general, the
ast code uses REQ() for those sanity checks.
Fix some error handling for augmented assignments. As comments in the
code explain, set_context() ought to work here, but I got unexpected
crashes when I tried it. Should come back to this.
Add note to Grammar that yield expression is a special case.
Add doctest cases for SyntaxErrors raised by ast.c.
Squash new warnings from VC 7.1 about mixing signed and
unsigned types in comparisons. I can see why `len` was
changed to size_t here, but don't see why `i` was also
changed. Change `i` back to int.
This code generated a C assertion:
assert 1, ([s for s in x] +
[s for s in x])
pass
assert was completely broken, it needed to use the proper block.
compiler_use_block() is now no longer used, so remove it.
Add C API function Py_GetBuildNumber(), add it to the interactive prompt
banner (i.e. Py_GetBuildInfo()), and add it as the sys.build_number
attribute. The build number is a string instead of an int because it may
contain a trailing 'M' if there are local modifications.
Strip off leading dots and slash so the generated files are the same regardless
of whether you configure in the checkout directory or build.
If anyone configures in a different directory, we might want a cleaner
approach using os.path.*(). Hopefully this is good enough.
If a line had multiple semi-colons and ended with a semi-colon, we would
loop too many times and access a NULL node. Exit the loop early if
there are no more children.
In C++, it's an error to pass a string literal to a char* function
without a const_cast(). Rather than require every C++ extension
module to put a cast around string literals, fix the API to state the
const-ness.
I focused on parts of the API where people usually pass literals:
PyArg_ParseTuple() and friends, Py_BuildValue(), PyMethodDef, the type
slots, etc. Predictably, there were a large set of functions that
needed to be fixed as a result of these changes. The most pervasive
change was to make the keyword args list passed to
PyArg_ParseTupleAndKewords() to be a const char *kwlist[].
One cast was required as a result of the changes: A type object
mallocs the memory for its tp_doc slot and later frees it.
PyTypeObject says that tp_doc is const char *; but if the type was
created by type_new(), we know it is safe to cast to char *.
Incorrect code was generated for:
foo(a = i for i in range(10))
This should have generated a SyntaxError. Fix the Grammar so
it raises a SyntaxError and test it.
I'm uncertain whether this should be backported. It makes
something that was Syntactically valid invalid. However,
the code would either be completely broken or do the wrong thing.
This change implements a new bytecode compiler, based on a
transformation of the parse tree to an abstract syntax defined in
Parser/Python.asdl.
The compiler implementation is not complete, but it is in stable
enough shape to run the entire test suite excepting two disabled
tests.
- SF Bug #772896, unknown encoding results in MemoryError, which is not helpful
I will only backport the segfault fix. I'll let Anthony decide if he wants
the other changes backported. I will do the backport if asked.
Fix over-aggressive PyErr_Clear(). The same code fragment appears in
various guises in list.extend(), map(), filter(), zip(), and internally
in PySequence_Tuple().
- Handle both frozenset() and frozenset([]).
- Do not use singleton for frozenset subclasses.
- Finalize the singleton.
- Add test cases.
* Factor-out set_update_internal() from set_update(). Simplifies the
code for several internal callers.
* Factor constant expressions out of loop in set_merge_internal().
* Minor comment touch-ups.
[ 1180995 ] binary formats for marshalling floats
Adds 2 new type codes for marshal (binary floats and binary complexes), a
new marshal version (2), updates MAGIC and fiddles the de-serializing of
code objects to be less likely to clobber the real reason for failing if
it fails.
[ 1181301 ] make float packing copy bytes when they can
which hasn't been reviewed, despite numerous threats to check it in
anyway if noone reviews it. Please read the diff on the checkin list,
at least!
The basic idea is to examine the bytes of some 'probe values' to see if
the current platform is a IEEE 754-ish platform, and if so
_PyFloat_{Pack,Unpack}{4,8} just copy bytes around.
The rest is hair for testing, and tests.
A problem regarding importing symlinked modules was recently reported on the
Cygwin mailing list:
http://cygwin.com/ml/cygwin/2005-04/msg00257.html
The following test case demonstrates the problem:
$ ls -l
total 1
lrwxrwxrwx 1 jt None 6 Apr 23 13:32 bar.py -> foo.py
-rw-r--r-- 1 jt None 24 Apr 18 20:13 foo.py
$ python -c 'import bar'
Traceback (most recent call last):
File "<string>", line 1, in ?
ImportError: No module named bar
Since Cygwin's case_ok() uses a modified version of the Windows's version, the
symlinked bar module actually resolves to file foo.py instead of bar.py. This
obviously causes the matching code to fail (regardless of case).
The patch fixes this problem by making Cygwin use the Mac OS X case_ok()
instead of a modified Window's version.
If we exit via the break here, we need to set ff_last_lineno or
FUTURE_POSSIBLE() will remain true. The bug affected statements
containing a variety of expressions, but not all expressions. It has
been present since Python 2.2.
Improve signal handling, especially when using threads, by forcing an early
re-execution of PyEval_EvalFrame() "periodic" code when things_to_do is not
cleared by Py_MakePendingCalls().
M Misc/NEWS
M Python/ceval.c
PyGILState_Ensure(): The fix in 2.4a3 for bug 1010677 reintroduced thread
shutdown race bug 225673. Repaired by (once again) ensuring the GIL is
held whenever deleting a thread state.
Alas, there's no useful test case for this shy bug. Four years ago, only
Guido could provoke it, on his box, and today only Armin can provoke it
on his box. I've never been able to provoke it (but not for lack of
trying!).
This is a critical fix for 2.3.5 too, since the fix for 1010677 got
backported there already and so also reintroduced 225673. I don't intend to
backport this fix. For whoever (if anyone) does, there are other thread
fixes in 2.4 that need backporting too, and I bet they need to happen first
for this patch to apply cleanly.
(Contributed by Bob Ippolito.)
This patch trims down the Python core on Darwin by making it
independent of CoreFoundation and CoreServices. It does this by:
Changed linker flags in configure/configure.in
Removed the unused PyMac_GetAppletScriptFile
Moved the implementation of PyMac_StrError to the MacOS module
Moved the implementation of PyMac_GetFullPathname to the
Carbon.File module
* Use simpler, faster two pass algorithm for markblocks().
* Free the blocks variable if not NULL and exiting without change.
* Verify that the rest of the compiler has not set an exception.
* Make the test for tuple of constants less restrictive.
* Embellish the comment for chained conditional jumps.
Peepholer could be fooled into misidentifying a tuple_of_constants.
Added code to count consecutive occurrences of LOAD_CONST.
Use the count to weed out the misidentified cases.
Added a unittest.
thread's id can't get duplicated, because (of course!) the current thread
is still running. The code should work either way, but reverting the
gratuitous change should make backporting easier, and gets the bad
reasoning out of 2.35's new comments.
can fail, check its return value, and die if it does fail.
_PyGILState_Init(): Assert that the thread doesn't already have an
association for autoTLSkey. If it does, PyThread_set_key_value() will
ignore the attempt to (re)set the association, which the code clearly
doesn't want.
code.
PyThread_set_key_value(): It's clear that this code assumes the passed-in
value isn't NULL, so document that it must not be, and assert that it
isn't. It remains unclear whether existing callers want the odd semantics
actually implemented by this function.
High level error message was stomping useful detailed messages from lower
level routines.
The new approach is to augment string error messages returned by the low
level routines. The provides both high and low level information. If
the exception value is not a string, no changes are made.
To see the improved messages in action, type:
import random
class R(random): pass
class B(bool): pass
Allows the lineno fixup code to remain simple and not have to deal with
multibyte codings.
* Add an assertion to that effect.
* Remove the XXX comment on the subject.
happen in 2.3, but nobody noticed it still was getting generated (the
warning was disabled by default). OverflowWarning and
PyExc_OverflowWarning should be removed for 2.5, and left notes all over
saying so.
* Perform the code length check earlier.
* Eliminate the extra PyMem_Free() upon hitting an EXTENDED_ARG.
* Assert that the NOP count used in jump retargeting matches the NOPs
eliminated in the final step.
* Add an XXX note to indicate that more work is being to done to
handle linenotab with intervals > 255.
* Make a pass to eliminate NOPs. Produce code that is more readable,
more compact, and a tiny bit faster. Makes the peepholer more flexible
in the scope of allowable transformations.
* With Guido's okay, bumped up the magic number so that this patch gets
widely exercised before the alpha goes out.
files and not re-optimized upon import. Saves a bit of startup time while
still remaining decoupled from the rest of the compiler.
As a side benefit, handcoded bytecode is not run through the optimizer
when new code objects are created. Hopefully, a handcoder has already
created exactly what they want to have run.
(Idea suggested by Armin Rigo and Michael Hudson. Initially avoided
because of worries about compiler coupling; however, only the nexus
point needed to be moved so there won't be a conflict when the AST
branch is loaded.)
[ 1009560 ] Fix @decorator evaluation order
From the description:
Changes in this patch:
- Change Grammar/Grammar to require
newlines between adjacent decorators.
- Fix order of evaluation of decorators
in the C (compile.c) and python
(Lib/compiler/pycodegen.py) compilers
- Add better order of evaluation check
to test_decorators.py (test_eval_order)
- Update the decorator documentation in
the reference manual (improve description
of evaluation order and update syntax
description)
and the comment:
Used Brett's evaluation order (see
http://mail.python.org/pipermail/python-dev/2004-August/047835.html)
(I'm checking this in for Anthony who was having problems getting SF to
talk to him)
because GNU/k*BSD uses gnu pth to provide pthreads, but will also happen on any
system that does the same.
python fails to build because it doesn't detect gnu pth in pthread
emulation. See C comments in patch for details.
patch taken from http://bugs.debian.org/264315
[ 1005248 ] new.code() not cleanly checking its arguments
using the result of new.code() can still destroy the sun, but merely
calling the function shouldn't any more.
I also rewrote the existing tests of new.code() to use vastly less
un-bogus arguments, and added tests for the previous insane behaviours.
hack: it would resize *interned* strings in-place! This occurred because
their reference counts do not have their expected value -- stringobject.c
hacks them. Mea culpa.
interning were not clear here -- a subclass could be mutable, for
example -- and had bugs. Explicitly interning a subclass of string
via intern() will raise a TypeError. Internal operations that attempt
to intern a string subclass will have no effect.
Added a few tests to test_builtin that includes the old buggy code and
verifies that calls like PyObject_SetAttr() don't fail. Perhaps these
tests should have gone in test_string.
[ 991812 ] PyArg_ParseTuple can miss errors with warnings as exceptions
as suggested in the report.
This is definitely a 2.3 candidate (as are most of the checkins I've
made in the last month...)
have differing refcount semantics. If anyone sees a prettier way to
acheive the same ends, then please go for it.
I think this is the first time I've ever used Py_XINCREF.
* Fixes an incorrect variable in a PyDict_CheckExact.
* Allow general mapping locals arguments for the execfile() function
and exec statement.
* Add tests.
PyImport_ReloadModule(): restore the module to sys.modules in error cases.
load_package(): semantic-neutral refactoring from an earlier stab at
this patch; giving it a common error exit made the code
easier to follow, so retaining that part.
_RemoveModule(): new little utility to delete a key from sys.modules.
__oct__, and __hex__. Raise TypeError if an invalid type is
returned. Note that PyNumber_Int and PyNumber_Long can still
return ints or longs. Fixes SF bug #966618.
The preceding case statement was missing a terminating "break" stmt,
so fell into the new code by mistake. This caused uncaught out-of-bounds
accesses to the "names" tuple, leading to a variety of insane behaviors.
expected entrypoint. The unlinking will crash the application if the
module contained ObjC code. The price of this is small: a little wasted
memory, and only in a case than isn't expected to occur often.
[ 984722 ] Py_BuildValue loses reference counts on error
I'm ever-so-slightly uneasy at the amount of work this can do with an
exception pending, but I don't think that this can result in anything
more serious than a strange error message.
[ 960406 ] unblock signals in threads
although the changes do not correspond exactly to any patch attached to
that report.
Non-main threads no longer have all signals masked.
A different interface to readline is used.
The handling of signals inside calls to PyOS_Readline is now rather
different.
These changes are all a bit scary! Review and cross-platform testing
much appreciated.
table' of the dll, to make sure that the dll really was build for the
correct Python version. It does this by looking for an entry
'pythonXY.dll' (X.Y is the Python version number).
The code now checks the size of the dll's import table before reading
entries from it. Before this patch, the code crashed trying to read
the import table when the size was zero (as in Win2k's wmi.dll, for
example).
Look for imports of 'pythonXY_d.dll' in a debug build instead of
'pythonXY.dll'.
Fixes SF 951851: Crash when reading "import table" of certain windows dlls.
Already backported to the 2.3 branch.
The builtin eval() function now accepts any mapping for the locals argument.
Time sensitive steps guarded by PyDict_CheckExact() to keep from slowing
down the normal case. My timings so no measurable impact.
Add a more informative message for the common user mistake of subclassing
from a module name rather than another class (i.e. random instead of
random.random).
(Code contributed by Jiwon Seo.)
The documentation portion of the patch is being re-worked and will be
checked-in soon. Likewise, PEP 289 will be updated to reflect Guido's
rationale for the design decisions on binding behavior (as described in
in his patch comments and in discussions on python-dev).
The test file, test_genexps.py, is written in doctest format and is
meant to exercise all aspects of the the patch. Further additions are
welcome from everyone. Please stress test this new feature as much as
possible before the alpha release.
pre-increment forms to post-increment forms. Post-incrementing
also eliminates the need for negative array indices for oparg fetches.
* In exception handling code, check for class based exceptions before
the older string based exceptions.
BINARY_SUBSCR:
* invert test for normal case fall through
* eliminate err handling code by jumping to slow_case
LOAD_LOCALS:
* invert test for normal case fall through
* continue instead of break for the non-error case
STORE_NAME and DELETE_NAME:
* invert test for normal case fall through
LOAD_NAME:
* continue instead of break for the non-error case
DELETE_FAST:
* invert test for normal case fall through
LOAD_DEREF:
* invert test for normal case fall through
* continue instead of break for the non-error case
tests of "why" against WHY_YIELD became useless. This patch removes them,
but assert()s that why != WHY_YIELD everywhere such a test was removed.
The test suite ran fine under a debug build (i.e., the asserts never
triggered).
* Defer error handling for wrong number of arguments to the
unpack_iterable() function. Cuts the code size almost in half.
* Replace function calls to PyList_Size() and PyTuple_Size() with
their smaller and faster macro counterparts.
* Move the constant structure references outside of the inner loops.
(Contributed by Andrew I MacIntyre.)
disables opcode prediction when dynamic execution
profiling is in effect, so the profiling counters at
the top of the main interpreter loop in eval_frame()
are updated for each opcode.
Simplified version of Neal Norwitz's patch which adds gotos for
opcodes that set "why". This skips a number of tests where the
outcome of the tests are known in advance.
comments about why both calls to cyclic gc here can cause problems.
I'll backport to 2.3 maint. Since the calls were introduced in 2.3,
that will be the end of it.
and left shifts. (Thanks to Kalle Svensson for SF patch 849227.)
This addresses most of the remaining semantic changes promised by
PEP 237, except for repr() of a long, which still shows the trailing
'L'. The PEP appears to promise warnings for operations that
changed semantics compared to Python 2.3, but this is not
implemented; we've suffered through enough warnings related to
hex/oct literals and I think it's best to be silent now.
* Install the unittests, docs, newsitem, include file, and makefile update.
* Exercise the new functions whereever sets.py was being used.
Includes the docs for libfuncs.tex. Separate docs for the types are
forthcoming.
The embed2.diff patch solves the user's problem by exporting the missing
symbols from the Python core so Python can be embedded in another Cygwin
application (well, at lest vim).
Cygwin's pthread_sigmask() implementation appears to be buggy. This
patch works around this problem by using sigprocmask() instead.
This patch is implemented in a general way so it could be used by other
platforms too. If this approach is deemed too risky, then I can work up
a patch that just hacks Python/thread_pthread.h for Cygwin.
Note that I tested this patch against 2.3c1 under Red Hat Linux 8.0 too.
[snip]
And finally, I need someone to regenerate pyconfig.h.in and configure
with the same versions of the autotools that are normally used by
Python.
Neal kindly regenerated pyconfig.h.in and configure for me.
If the initial import of warnings fails, clear the error. When the module
is actually needed, if the original import failed, see if it has managed
to find its way to sys.modules yet and if so, remember it.
Fixes for three related bugs, including errors that caused a script to
be ignored without printing an error message. The key problem was a bad
interaction between syntax warnings and syntax errors. If an
exception was already set when a warning was issued, the warning could
clobber the exception.
The PyErr_Occurred() check in issue_warning() isn't entirely
satisfying (the caller should know whether there was already an
error), but a better solution isn't immediately obvious.
Bug fix candidate.
behavior, creating many threads very quickly. A long debugging session
revealed that the Windows implementation of PyThread_start_new_thread()
was choked with "laziness" errors:
1. It checked MS _beginthread() for a failure return, but when that
happened it returned heap trash as the function result, instead of
an id of -1 (the proper error-return value).
2. It didn't consider that the Win32 CreateSemaphore() can fail.
3. When creating a great many threads very quickly, it's quite possible
that any particular bootstrap call can take virtually any amount of
time to return. But the code waited for a maximum of 5 seconds, and
didn't check to see whether the semaphore it was waiting for got
signaled. If it in fact timed out, the function could again return
heap trash as the function result. This is actually what confused
the test program, as the heap trash usually turned out to be 0, and
then multiple threads all got id 0 simultaneously, confusing the
hell out of threading.py's _active dict (mapping id to thread
object). A variety of baffling behaviors followed from that.
WRT #1 and #2, error returns are checked now, and "thread.error: can't
start new thread" gets raised now if a new thread (or new semaphore)
can't be created. WRT #3, we now wait for the semaphore without a
timeout.
Also removed useless local vrbls, folded long lines, and changed callobj
to a stack auto (it was going thru malloc/free instead, for no discernible
reason).
Bugfix candidate.
A new API (only accessible from C) to interrupt a thread by sending it
an exception. This is not always effective, but might help some people.
Requested by Just van Rossum and Alex Martelli. It is intentional
that you have to write your own C extension to call it from Python.
Docs will have to wait.
It depended on the previously removed basic block checker to
prevent a jump into the middle of the transformed block.
Clears SF 757818: tuple assignment -- SystemError: unknown opcode
The compiler was reseting the list comprehension tmpname counter for each function, but the symtable was using the same counter for the entire module. Repair by move tmpname into the symtable entry.
Bugfix candidate.
[ 708901 ] Lineno calculation sometimes broken
A one line patch to compile.c and a rather-more-than-one-line patch
to test_dis. Hey ho.
Possibly a backport candidate -- tho' lnotab is less used in 2.2...
* Can now test for basic blocks.
* Optimize inverted comparisions.
* Optimize unary_not followed by a conditional jump.
* Added a new opcode, NOP, to keep code size constant.
* Applied NOP to previous transformations where appropriate.
Note, the NOP would not be necessary if other functions were
added to re-target jump addresses and update the co_lnotab mapping.
That would yield slightly faster and cleaner bytecode at the
expense of optimizer simplicity and of keeping it decoupled
from the line-numbering structure.
particular leaving the traceback object (and everything reachable
from it) alive throughout shutdown. The patch is mostly from Guido.
Bugfix candidate.
new line.
New pvt API function _Py_PrintReferenceAddresses(): Prints only the
addresses and refcnts of the live objects. This is always safe to call,
because it has no dependence on Python's C API.
Py_Finalize(): If envar PYTHONDUMPREFS is set, call (the new)
_Py_PrintReferenceAddresses() right before dumping final pymalloc stats.
We can't print the reprs of the objects here because too much of the
interpreter has been shut down. You need to correlate the addresses
displayed here with the object reprs printed by the earlier
PYTHONDUMPREFS call to _Py_PrintReferences().
New functions:
unsigned long PyInt_AsUnsignedLongMask(PyObject *);
unsigned PY_LONG_LONG) PyInt_AsUnsignedLongLongMask(PyObject *);
unsigned long PyLong_AsUnsignedLongMask(PyObject *);
unsigned PY_LONG_LONG) PyLong_AsUnsignedLongLongMask(PyObject *);
New and changed format codes:
b unsigned char 0..UCHAR_MAX
B unsigned char none **
h unsigned short 0..USHRT_MAX
H unsigned short none **
i int INT_MIN..INT_MAX
I * unsigned int 0..UINT_MAX
l long LONG_MIN..LONG_MAX
k * unsigned long none
L long long LLONG_MIN..LLONG_MAX
K * unsigned long long none
Notes:
* New format codes.
** Changed from previous "range-and-a-half" to "none"; the
range-and-a-half checking wasn't particularly useful.
New test test_getargs2.py, to verify all this.
PYTHONDUMPREFS output after most teardown. Attempts to use
PYTHONDUMPREFS with the Zope3 test suite died with Py_FatalError(),
since _Py_PrintReferences() can end up executing arbitrary Python code
(for objects that override __repr__), and that requires an intact
interpreter.
even farther down, to just before the call to
_PyObject_DebugMallocStats(). This required the following changes:
- pystate.c, PyThreadState_GetDict(): changed not to raise an
exception or issue a fatal error when no current thread state is
available, but simply return NULL without raising an exception
(ever).
- object.c, Py_ReprEnter(): when PyThreadState_GetDict() returns NULL,
don't raise an exception but return 0. This means that when
printing a container that's recursive, printing will go on and on
and on. But that shouldn't happen in the case we care about (see
first bullet).
- Updated Misc/NEWS and Doc/api/init.tex to reflect changes to
PyThreadState_GetDict() definition.
the code erroneously decrefed the istep argument in an error case. This
caused a co_consts tuple to lose a float constant prematurely, which
eventually caused gc to try executing static data in floatobject.c (don't
ask <wink>). So reworked this extensively to ensure refcount correctness.
- range() now works even if the arguments are longs with magnitude
larger than sys.maxint, as long as the total length of the sequence
fits. E.g., range(2**100, 2**101, 2**100) is the following list:
[1267650600228229401496703205376L]. (SF patch #707427.)
return. Setting an exception can mess with the exception state, and
continuing is definitely wrong (since type is dereferenced later on).
Some code that calls this seems to be prepared for a NULL exception
type, so let's be safe rather than sorry and simply assume there's
nothing to normalize in this case.
Adds a single function to improve generated bytecode. Has a single line
attachment point, so it is completely de-coupled from both the compiler
and ceval.c.
Makes three simple transforms that do not require a basic block analysis
or re-ordering of code. Gives improved timings on pystone, pybench,
and any code using either "while 1" or "x,y=y,x".
Arranged that all the objects exposed by __builtin__ appear in the list
of all objects. I basically peed away two days tracking down a mystery
leak in sys.gettotalrefcount() in a ZODB app (== tons of code), because
the object leaking the references didn't appear in the sys.getobjects(0)
list. The object happened to be False. Now False is in the list, along
with other popular & previously missing leak candidates (like None).
Alas, we still don't have a choke point covering *all* Python objects,
so the list of all objects may still be incomplete.
variables to store internal data. As a result, any atempts to use the
unicode system with multiple active interpreters, or successive
interpreter executions, would fail.
Now that information is stored into members of the PyInterpreterState
structure.
Added two predictions:
GET_ITER --> FOR_ITER
FOR_ITER --> STORE_FAST or UNPACK_SEQUENCE
Improves timings on pybench and timeit.py. Pystone results are neutral.
Applied to common cases:
COMPARE_OP is often followed by a JUMP_IF.
JUMP_IF is usually followed by POP_TOP.
Shows improved timings on PyStone, PyBench, and specific tests
using timeit.py:
python timeit.py -s "x=1" "if x==1: pass"
python timeit.py -s "x=1" "if x==2: pass"
python timeit.py -s "x=1" "if x: pass"
python timeit.py -s "x=100" "while x!=1: x-=1"
Potential future candidates:
GET_ITER predicts FOR_ITER
FOR_ITER predicts STORE_FAST or UNPACK_SEQUENCE
Also, applied missing goto fast_next_opcode to DUP_TOPX.
My previous patches should have used fast_next_opcode
in a few places instead of continue.
Also, applied one PyInt_AS_LONG macro in a place where
the type had already been checked.
rarely needed, but can sometimes be useful to release objects
referenced by the traceback held in sys.exc_info()[2]. (SF patch
#693195.) Thanks to Kevin Jacobs!
Thomas Wouters
Anthony Baxter
Martin v. Löwis
Phillip J. Eby
Neal Norwitz
Jeremy Hylton
Georg Brandl
Tim Peters
Armin Rigo
Skip Montanaro
Hye-Shik Chang
Walter Dörwald
Nick Coghlan
Guido van Rossum
Brett Cannon
Fredrik Lundh
Barry Warsaw
Neil Schemenauer
Michael W. Hudson
Raymond Hettinger
Jason Tishler
Andrew MacIntyre
Fred Drake
Kurt B. Kaiser
Matthias Klose
Jack Jansen
Thomas Heller
Nicholas Bastin
Alex Martelli
Mark Hammond
Gustavo Niemeyer