when using X11 and the Fink distribution. Python Bug 1263656.
2. Eliminate duplicated code in ScriptBinding.run_module_event()
Modified Files:
NEWS.txt ScriptBinding.py
of replacing the input line, the previous command is now appended to the
input line. Indentation is preserved, and undo is enabled.
Patch 1196917 Jeff Shute
Modified Files:
NEWS.txt PyShell.py
the Untabify command.
2. Corrected "tab/space" Error Dialog to show correct menu for Untabify.
Patch 1196980 Jeff Shute
M EditorWindow.py
M NEWS.txt
M ScriptBinding.py
New files are colorized by default, and colorizing is removed when
saving as non-Python files. Patch 1196895 Jeff Shute
Closes Python Bugs 775012 and 800432, partial fix IDLEfork 763524
2. Update help.txt for left/right word delete
M CREDITS.txt
M ColorDelegator.py
M EditorWindow.py
M NEWS.txt
M help.txt
has never worked and no one has complained. It is still possible to set a
default tabs (v. spaces) indent 'manually' via config-main.def (or to turn on
tabs for the current EditorWindow via the Format menu) but IDLE will encourage
indentation via spaces.
Enable setting the indentation width using the Options dialog.
Bug # 783877
Remove some commented out old code from configDialog.py (related to old
methods for invoking the HelpBrowser).
M EditorWindow.py
M NEWS.txt
M configHandler.py
2. Restore use of set_indentation_params(), was dead code since
Autoindent.py was merged into EditorWindow.py.
3. Make usetabs, indentwidth, tabwidth, context_use_ps1 instance vars
and set in EditorWindow.__init__()
4. In PyShell.__init__() set usetabs, indentwidth and context_use_ps1
explicitly (config() is eliminated).
5. Add Tabnanny check when Module is Run/F5, not just when Checked.
6. Discourage using an indent width other than 8 when using tabs to
indent Python code.
M EditorWindow.py
M NEWS.txt
M PyShell.py
M ScriptBinding.py
button) caused IDLE to fail on restart (no new keyset was created in
config-keys.cfg). Also true for Theme/highlights. Python Bug 1064535.
M configDialog.py
the indentation of a comment block to be ignored when reformatting the
block, leading to overly long reformatted lines (too wide by an amount
equal to the indentation width). Looks like a typo in the original
patch, a 1-character repair.
a new file, don't raise a dialog. IDLEfork 954928.
2. Refactor EditorWindow.wakeup() to WindowList.ListedToplevel.wakeup() and
clarify that the Toplevel of an EditorWindow is a WindowList.ListedToplevel.
3. Make a number of improvements to keyboard focus binding. Improve window
raising, especially in the debugger. IDLEfork Bug 763524 (GvR list).
4. Bump idlever to 1.1a3
M Debugger.py
M EditorWindow.py
M FileList.py
M NEWS.txt
M PyShell.py
M WindowList.py
M idlever.py
and format the warning similarly to an exception for both that check and for
warnings raised in the subprocess.
M NEWS.txt
M Pyshell.py
M ScriptBinding.py
M run.py
The visibility state of the code context pane is now persistent between
sessions and the pane does not appear in the shell window.
M CodeContext.py
M EditorWindow.py
M NEWS.txt
M PyShell.py
M config-extensions.def
M configHandler.py
2. Add a <<toggle-code-context>> envent to the [CodeContext] section of
config-extensions.def and also a default-on variable, set to 0.
3. Update the help file to include Code Context.
M CodeContext.py
M config-extensions.def
M help.txt
2. Add exception handling to EditorWindow Tkinter variable setvar() and getvar() fcns.
3. EditorWindow: remove some unneeded comments.
4. Add a separator to the Options menu
5. extend.txt: describe how to create a menu entry which has no keybinding.
M Bindings.py
M EditorWindow.py
M extend.txt
M IOBinding.py
M NEWS.txt
M configDialog.py
- If nulls somehow got into the strings in recent-files.lst
EditorWindow.update_recent_files_list() was failing. Python Bug 931336.
M ClassBrowser.py
M ColorDelegator.py
M EditorWindow.py
M NEWS.txt
M PyShell.py
M TreeWidget.py
M config-highlight.def
M configDialog.py
M configHandler.py
to the execution server. The return of the OK response from the subprocess
initialization was interfering and causing the sending socket to be not
ready. Add an IO ready test to fix this. Moved the polling IO ready test
into pollpacket().
M NEWS.txt
M rpc.py
Backport candidate.
connect to the user GUI process. Added a timeout to the GUI's listening
socket. Added Tk error dialogs to PyShell.py to announce a failure to bind
the port or connect to the subprocess. Clean up error handling during
connection initiation phase. This is an update of Python Patch 778323.
M NEWS.txt
M PyShell.py
M ScriptBinding.py
M run.py
Backport candidate.
which use the Space key. Limit unmodified user keybindings to the
function keys.
Python Bug 775353, IDLEfork Bugs 755647, 761557
Improve error handling during startup if there's no Tkinter.
M NEWS.txt
M PyShell.py
M config-keys.def
M configHandler.py
M keybindingDialog.py
Backport candidate.
1. Remove "idle" script, it lives in Tools/scripts/ now.
2. Remove shebang from idle.py, should be called explicitly.
3. Remove obsolete test code from rpc.py; needs unit test.
Extensions must still be configured manually and there is currently one
set of extension key bindings for all platforms.
Bring NEWS.txt up to date.
Update CREDITS.txt and idlever.py for release.
M NEWS.txt
M config-extensions.def
M extend.txt
M help.txt
M idlever.py
1. Add additional buttons for Python Copyright and Credits
2. Use the Python LICENSE file instead of the old IDLE LICENSE.txt
3. Add additional buttons for IDLE's README and NEWS
4. Implement a method to read text from a _Printer object
5. Rename the Ok button to Close
6. Clean up to conform to Python code formatting standards
textView.py:
1. Change background to white on all platforms
2. Increase height of frame
3. Add an optional parameter to textViewer to allow inserting text into
the viewer instead of reading a file.
4. Rename the Ok button to Close
Modified Files:
aboutDialog.py textView.py
Window menu updates.
2. Display Python Shell window in Window menu
3. Remove some dead code in FileList.py
M EditorWindow.py
M FileList.py
M WindowList.py
abnormal exit situations cleanly, especially stuck user threads. Future
plan is to intercept the user's atexit functions and run them under
IDLE's control.
The default font is not highlighted in the Options dialog when
IDLEfork is first installed.
2. Reduce default font to 10 pt and increase default window height to give
a better initial impression on Windows.
M config-main.def
M configDialog.py
SF 661318
Adds autosave capability to IDLE and IDLE configuration dialog.
User can Run/F5 without explicit save dialog.
The default is to require the user to confirm the save.
M ScriptBinding.py
M config-main.def
M configDialog.py
e.g. further improve subprocess interrupt, exceptions, and termination.
2. Remove the workarounds in PyShell.py and ScriptBinding.py involving
interrupting the subprocess prior to killing it, not necessary anymore.
3. Fix a bug introduced at PyShell Rev 1.66: was getting extra shell menu
every time the shell window was recreated.
M PyShell.py
M ScriptBinding.py
M rpc.py
M run.py
[ 735527 ] Re Bug [ 678325 ] ParenMatching Missing AutoIndent
AutoIndent was merged with EditorWindow, this patch corrects
the references in ParenMatch.
SF Patch 686254 "Run IDLEfork from any directory without set-up"
Allows IDLE to run when not installed and cwd is not the IDLE directory.
I took the liberty of moving it to the startup scripts since once IDLEfork
is again a part of Python it will be superfluous and I don't want it to
be forgotten. But it is very useful for those using IDLEfork standalone!
M CREDITS.txt
M NEWS.txt
M idle
M idle.py
M idle.pyw
sys.path, prepend it. This allows the module to import other modules
in the same directory. Do the same for a script run from the command
line.
2. Tweak the IDLE usage message a bit more.
SF Bug 706860 (closed)
SF Patch 686254 (reject specific solution)
SF Patch 507327 (similar)
M PyShell.py
M ScriptBinding.py
2. Remove the shell menu and associated bindings when running
without the subprocess.
3. Update the IDLE Help and usage text.
4. Update display_port_binding_error to suggest using -n
M PyShell.py
M help.txt
2. Add an indicator to the shell startup notice when running w/o
subprocess.
3. Improve exception reporting when running a command or script from the
command line.
4. Clarify the fact that breakpoints set or cleared after a file is
saved will revert to the saved state if the file is closed without
re-saving.
5. If user tries to exit or restart when user code is running, interrupt
the user code. This helps to eliminate occasional hanging
subprocesses on Windows (except for Freddy :).
M NEWS.txt
M PyShell.py
M ScriptBinding.py
This bug, henceforth designated Freddy, was due to the mistaken
elimination of the KeyboardInterrupt exception at the previous revision.
PyShell's unix_terminate hammer was masking the problem on Linux. On W2K
the subprocess MainThread was trying to print the exception after the
SockThread had ceased to service the socket. The subprocess would then
detach and spin when the GUI created the new subprocess.
Modified Files: run.py
2. run.py: move exception printing to toplevel to allow access from main()
3. Clarification in PyShell.py: when the subprocess is restarted, the
debugger GUI is reused with a fresh instance of the subprocess
debugger.
M PyShell.py
M RemoteDebugger.py
M run.py
threading modules. Can debug user code which imports these modules,
though.
2. Re-enable debugger in PyShell.
3. Remove old code implementing previous approaches to this issue.
M Debugger.py
M PyShell.py
M rpc.py
is now interruptable on Windows.
2. Tweak signal.signal() wait parameters as called by various methods
to improve I/O response, especially on Windows.
3. Debugger is disabled at this check-in pending further development.
M NEWS.txt
M PyShell.py
M rpc.py
M run.py
M run.py
1. Move subprocess socket handling to a subthread - "SockThread".
2. In the subprocess, implement a queue and global completion and exit
flags. Execute code after it is passed through the queue. (Currently,
user code is executed in SockThread. The next phase of development will
move the tail of the queue to MainThread.)
3. Implement an RPC message used to shut down the execution server.
4. Improve normal and exception subprocess exits.
(At this checkin a "pass loop" interrupt doesn't work on any platform. It
will be restored for all platforms once user code execution is moved to
MainThread.)
M run.py
1. Clarify that rpc.SocketIO._getresponse() currently blocks on socket.
2. Improve exception handling in subprocess when GUI terminates abruptly.
Eliminate extra blank line in shell output. Caused by stdout not being
flushed
upon completion of subprocess' Executive.runcode() when user code ends by
outputting an unterminated line, e.g. print "test",
M run.py
Move exception formatting out of rpc.py. This allows each end of the
link to format and print exceptions how and where it sees fit and makes it
easier for threads to display their own exceptions.
M PyShell.py
M ScriptBinding.py
M rpc.py
M run.py
Clean up the way IDLEfork handles termination of the subprocess, restore
ability to interrupt user code in Windows (so long as it's doing terminal
I/O).
1. Handle subprocess interrupts in Windows with an RPC message.
2. Run/F5 will restart the subprocess even if user code is running.
3. Restart the subprocess if the link is dropped.
4. Exit IDLE cleanly even during I/O.
4. In rpc.py, remove explicit calls to statelock, let the condition
variable handle acquire() and release().
M rpc.py
SF Bug 676398 Doesn't handle non-built-in exceptions
1. Move exception formatting to the subprocess; allows subclassing of
exceptions, including subclasses created in the shell without
introducing excessive complexity in the RPC mechanism.
2. Provide access to linecache from subprocess to support this.
M RemoteDebugger.py
M rpc.py
Fix the incorrect shell exception tracebacks generated when running
under debugger control:
1. Use rpc.SocketIO.asynccall() instead of remotecall() to handle the
IdbProxy.run() command.
2. Add a 'shell' attribute to RemoteDebugger.IdbProxy to allow setting
of ModifiedInterpreter's active_seq attribute from RemoteDebugger code.
3. Cleanup PyShell.ModifiedInterpreter.runcode() and remove ambiguity
regarding use of begin/endexecuting().
4. In runcode() and cleanup_traceback() use 'console' instead of 'file' to
denote the entity to which the exception traceback is printed.
5. Enhance cleanup_traceback() so if the traceback is pruned entirely away
(the error is in IDLE internals) it will be displayed in its entirety
instead.
6. ModifiedInterpreter.runcode() now prints ERROR RPC returns to both
console and __stderr__.
7. Make a small tweak to the rpc.py debug messages.
M PyShell.py
M config-keys.def
M configHandler.py
1. Clear any un-entered characters from input line before printing the
restart boundary.
2. Restore the Debug menu: There are now both Shell and Debug menus.
3. Add Control-F6 keybinding to Restart Shell.
4. Clarify PyShell.cancel_check() comment.
5. Update doc string for Bindings.py and re-format the file slightly.
(Loewis) which uses 'SRCDIR' (if available) in package dir path.
2. Merge Python IDLE setup.py Rev 1.5 (Loewis) to allow installation
from the build directory. IDLEfork SF Patch 668998 (Loewis)
The Py2.3 updates to the pyclbr module return both Class and Function
objects. The IDLE ClassBrowser module only knew about Class and could
not handle objects which did not define "super".
Fixed by adding a guard.
M EditorWindow.py
M NEWS.txt
M config-main.def
M configDialog.py
M configHandler.py
M configHelpSourceEdit.py
M configSectionNameDialog.py
- Change default: IDLE now starts with Python Shell.
- Removed the File Path from the Additional Help Sources scrolled list.
- Add capability to access Additional Help Sources on the web if the
Help File Path begins with //http or www. (Otherwise local path is
validated, as before.)
- Additional Help Sources were not being posted on the Help menu in the
order entered. Implement sorting the list by [HelpFiles] 'option'
number.
- Add Browse button to New Help Source dialog. Arrange to start in
Python/Doc if platform is Windows, otherwise start in current directory.
- Put the Additional Help Sources directly on the Help menu instead of in
an Extra Help cascade menu. Rearrange the Help menu so the Additional
Help Sources come last. Update help.txt appropriately.
- Fix Tk root pop-ups in configSectionNameDialog.py and configDialog.py
M configHelpSourceEdit.py
1. Attach configHelpSourceEdit error dialogs to parent to avoid Tk root
pop-ups.
2. Make configHelpSourceEdit OK button the default and bind <Return>.
3. Reformat configHelpSourceEdit.
4. ConfigDialog.SaveAllChangedConfig() had a bug which caused additional
help sources to be deleted when other config items were changed.
4. Uniform capitalization in configDialog.
5. Update configDialog doc string.
M Bindings.py
M EditorWindow.py
M PyShell.py
M config-keys.def
M configHandler.py
M help.txt
1. Annotate the shell window with last restart boundary upon restart.
2. Provide a shell menu entry and hot key (F6) to jump to the last
restart boundary.
3. Add a new shell menu feature to restart the shell.
4. Update the help menu to add these features.
5. Update the help menu to put text in same order as the menus.
6. Correct a capitalization inconsistency on the Edit menu: Expand Word
7. Rename the "Debug" menu to be "Shell": it's doing more now.
8. Rearrange the "Shell" menu to make the StackViewer entries adjacent.
9. Add a get_geometry method to EditorWindow, which may be of use in
making window positions persisent.
10. Make <ctrl-v> the "Classic Windows" paste key.
11. Restore decorum on the Help menu by removing "Advice". As Guido said,
things will never be the same. Thanks, David!
M PyShell.py
1. PyShell Rev 1.39, EditorWindow Rev 1.37 fix was not handling a
multiline prompt.
2. The same fix introduced a bug where hitting <enter> at a previous
prompt-only line would copy the prompt to the iomark.
3. Move the setting of sys.ps1 earlier, into PyShell.main(), to allow
this code to work before a shell is started up.
4. If cursor is on the input line in the prompt, and you hit <enter>,
process the line instead of complaining.
5. If line has no stdin range (this includes the last line before shell
restart) strip any prompt before recalling.
M idle
M idle.py
M idle.pyw
M setup.py
Switch back to installing IDLE as a package. The IDLE GUI and the
subprocess will both attempt to start up via the package mechanism, but if
IDLE is not yet installed it is possible to run by calling python idle.py
in the IDLE source directory, or to add the source directory to sys.path.
One advantage of doing it this way is IDLE stays off sys.path.
Developed in collaboration with Tony Lownds.
Kurt B. Kaiser
Neal Norwitz
Georg Brandl
Tim Peters
Anthony Baxter
Raymond Hettinger
Martin v. Löwis
Skip Montanaro
Walter Dörwald
Thomas Heller
Guido van Rossum
Tony Lownds