Miss Islington (bot)
be69ff232d
bpo-35513: Replace time.time() with time.monotonic() in tests (GH-11182)
...
Replace time.time() with time.monotonic() in tests to measure time
delta.
test_zipfile64: display progress every minute (60 secs) rather than
every 5 minutes (5*60 seconds).
(cherry picked from commit 2cf4c202ff
)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
2018-12-17 01:03:04 -08:00
Miss Islington (bot)
339e0c1296
bpo-32692: Fix test_threading.test_set_and_clear() (GH-8331)
...
Increase the timeout: give timeout x 4 instead of timeout x 2 to
threads to wait until the Event is set, but reduce the sleep from 500
ms to 250 ms. So the test should be more reliable and faster!
(cherry picked from commit 81950495ba
)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
2018-07-19 02:27:42 -07:00
Garrett Berg
a0374dd34a
bpo-32208: update threading.Semaphore docs and add unit test ( #4709 )
...
* fix issue32208: update threading.Semaphore docs and add unit test to validate correct behavior
* add test for blocking
* Update threading.rst
* semaphore: remove documentation validation tests and move 'return value' test to BaseSemaphore
2017-12-07 20:04:26 +02:00
Victor Stinner
ff40ecda73
bpo-31234: Add test.support.wait_threads_exit() ( #3578 )
...
Use _thread.count() to wait until threads exit. The new context
manager prevents the "dangling thread" warning.
2017-09-14 13:07:24 -07:00
Victor Stinner
096ae3373a
bpo-31234: Try to fix lock_tests warning ( #3557 )
...
Try to fix the "Warning -- threading_cleanup() failed to cleanup 1
threads" warning in test.lock_tests: wait a little bit longer to give
time to the threads to complete.
Warning seen on test_thread and test_importlib.
2017-09-13 16:41:08 -07:00
Serhiy Storchaka
32cb968a2e
bpo-30727: Fix a race condition in test_threading. ( #2334 )
2017-06-23 13:36:36 +03:00
Berker Peksag
dd745cc3ff
Issue #25551 : Test condition behavior instead of its internals
...
test_reset_internal_locks was looking at Event's _cond._lock. This
makes it harder to change internals of the Condition object and
makes the test fragile.
The test was added by Nir Soffer in 6108d30dde21.
Patch by Nir Soffer.
2016-04-29 17:25:51 +03:00
Berker Peksag
6d34bbbfc7
Issue #25551 : Test condition behavior instead of its internals
...
test_reset_internal_locks was looking at Event's _cond._lock. This
makes it harder to change internals of the Condition object and
makes the test fragile.
The test was added by Nir Soffer in 6108d30dde21.
Patch by Nir Soffer.
2016-04-29 17:25:29 +03:00
Raymond Hettinger
7836a27ceb
Issue #25298 : Add lock and rlock weakref tests (Contributed by Nir Soffer).
2015-10-09 00:03:51 -04:00
Benjamin Peterson
72181b2f53
merge 3.4 ( #25319 )
2015-10-05 22:00:33 -07:00
Benjamin Peterson
15982aad2b
reinitialize an Event's Condition with a regular lock ( closes #25319 )
2015-10-05 21:56:22 -07:00
Serhiy Storchaka
1770fde94c
Make some tests more frienly to MemoryError.
...
Free memory, unlock hanging threads.
2015-03-28 20:39:51 +02:00
Serhiy Storchaka
9db55004a1
Make some tests more frienly to MemoryError.
...
Free memory, unlock hanging threads.
2015-03-28 20:38:37 +02:00
Raymond Hettinger
62f4dad816
Issue 21137: Better repr for threading.Lock()
2014-05-25 18:22:35 -07:00
Kristjan Valur Jonsson
020af2a2bc
Issue #8799 : Reduce timing sensitivity of condition test by explicitly
...
delaying the main thread so that it doesn't race ahead of the workers.
2013-11-11 11:29:04 +00:00
Christian Heimes
c5d95b17ac
Add simple test for repr(lock)
2013-07-30 15:54:39 +02:00
Antoine Pitrou
ea3eb88bca
Issue #9260 : A finer-grained import lock.
...
Most of the import sequence now uses per-module locks rather than the
global import lock, eliminating well-known issues with threads and imports.
2012-05-17 18:55:59 +02:00
Charles-François Natali
61d28d6a74
Issue #13502 : threading: Fix a race condition in Event.wait() that made it
...
return False when the event was set and cleared right after.
2012-01-07 18:26:39 +01:00
Charles-François Natali
ded0348c08
Issue #13502 : threading: Fix a race condition in Event.wait() that made it
...
return False when the event was set and cleared right after.
2012-01-07 18:24:56 +01:00
Charles-François Natali
fd96eb2a68
Issue #11871 : In test_threading.BarrierTests, bump the default barrier timeout
...
to avoid timing-dependent failures.
2011-07-27 21:28:23 +02:00
Charles-François Natali
d4d1d068dc
Issue #11871 : In test_threading.BarrierTests, bump the default barrier timeout
...
to avoid timing-dependent failures.
2011-07-27 21:26:42 +02:00
Victor Stinner
2a12974bca
Close #12028 : Make threading._get_ident() public, rename it to
...
threading.get_ident() and document it. This function was used by
_thread.get_ident().
2011-05-30 23:02:52 +02:00
Victor Stinner
5f3b1c4979
(Merge 3.2) Issue #12096 : Fix a race condition in
...
test_threading.test_waitfor(). Patch written by Charles-François Natali.
2011-05-18 00:20:18 +02:00
Victor Stinner
3349bca46d
Issue #12096 : Fix a race condition in test_threading.test_waitfor(). Patch
...
written by Charles-François Natali.
2011-05-18 00:16:14 +02:00
Victor Stinner
c2824d41c3
Issue #11915 : threading.RLock()._release_save() raises a RuntimeError if the
...
lock was not acquired.
2011-04-24 23:41:33 +02:00
Antoine Pitrou
4333affb74
Try to fix sporadic failure in test_thread/test_threading
2011-04-04 22:00:10 +02:00
Antoine Pitrou
45fdb457da
Try to fix sporadic failure in test_thread/test_threading
2011-04-04 21:59:09 +02:00
Antoine Pitrou
7899acfc23
Issue #11618 : Fix the timeout logic in threading.Lock.acquire() under
...
Windows.
2011-03-31 01:00:32 +02:00
Kristján Valur Jónsson
6331520950
Issue 10260
...
Adding the wait_for() method to threading.Condition
2010-11-18 12:46:39 +00:00
Antoine Pitrou
12ae290bf3
Use laxer timeouts in barrier tests
2010-11-17 21:55:41 +00:00
Kristján Valur Jónsson
f53a626073
issue 10237
...
After increasing the default timeout for the barrier, the unittest for the default timeout must be adjusted
2010-10-31 03:00:57 +00:00
Kristján Valur Jónsson
6b6dffdc73
issue 10237
...
Increase the default timout of the barries used in the barrier tests. This should solve unexpected timeouts on some machines.
2010-10-30 05:15:42 +00:00
Kristján Valur Jónsson
3be00037d6
issue 8777
...
Add threading.Barrier
2010-10-28 09:43:10 +00:00
Georg Brandl
b9a4391754
#10218 : return timeout status from Condition.wait, mirroring other primitives' behavior.
2010-10-28 09:03:20 +00:00
Antoine Pitrou
0454af9b54
Issue #850728 : Add a *timeout* parameter to the `acquire()` method of
...
`threading.Semaphore` objects. Original patch by Torsten Landschoff.
2010-04-17 23:51:58 +00:00
Antoine Pitrou
7c3e577395
Issue #7316 : the acquire() method of lock objects in the :mod:`threading`
...
module now takes an optional timeout argument in seconds. Timeout support
relies on the system threading library, so as to avoid a semi-busy wait
loop.
2010-04-14 15:44:10 +00:00
Antoine Pitrou
959f3e5032
Merged revisions 76138,76173 via svnmerge from
...
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r76138 | antoine.pitrou | 2009-11-06 23:41:14 +0100 (ven., 06 nov. 2009) | 10 lines
Merged revisions 76137 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r76137 | antoine.pitrou | 2009-11-06 23:34:35 +0100 (ven., 06 nov. 2009) | 4 lines
Issue #7270 : Add some dedicated unit tests for multi-thread synchronization
primitives such as Lock, RLock, Condition, Event and Semaphore.
........
................
r76173 | antoine.pitrou | 2009-11-09 17:08:16 +0100 (lun., 09 nov. 2009) | 11 lines
Merged revisions 76172 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r76172 | antoine.pitrou | 2009-11-09 17:00:11 +0100 (lun., 09 nov. 2009) | 5 lines
Issue #7282 : Fix a memory leak when an RLock was used in a thread other
than those started through `threading.Thread` (for example, using
`thread.start_new_thread()`.
........
................
2009-11-09 16:52:46 +00:00
Antoine Pitrou
b087268217
Merged revisions 76172 via svnmerge from
...
svn+ssh://pythondev@svn.python.org/python/trunk
........
r76172 | antoine.pitrou | 2009-11-09 17:00:11 +0100 (lun., 09 nov. 2009) | 5 lines
Issue #7282 : Fix a memory leak when an RLock was used in a thread other
than those started through `threading.Thread` (for example, using
`thread.start_new_thread()`.
........
2009-11-09 16:08:16 +00:00
Antoine Pitrou
557934f5a9
Merged revisions 76137 via svnmerge from
...
svn+ssh://pythondev@svn.python.org/python/trunk
........
r76137 | antoine.pitrou | 2009-11-06 23:34:35 +0100 (ven., 06 nov. 2009) | 4 lines
Issue #7270 : Add some dedicated unit tests for multi-thread synchronization
primitives such as Lock, RLock, Condition, Event and Semaphore.
........
2009-11-06 22:41:14 +00:00