The patch also adds acosh, asinh, atanh, log1p and copysign to all platforms. Finally it fixes differences between platforms like different results or exceptions for edge cases. Have fun :)
'warnings' code in places where it was previously not possible (e.g., the
parser). It could also potentially lead to a speed-up in interpreter start-up
if the C version of the code (_warnings) is imported over the use of the
Python version in key places.
Closes issue #1631171.
Rather than sprinkle casts throughout the code, change Py_CHARMASK to
always cast it's result to an unsigned char. This should ensure we
do the right thing when accessing an array with the result.
svn+ssh://pythondev@svn.python.org/python/branches/trunk-bytearray
........
r61750 | christian.heimes | 2008-03-22 20:47:44 +0100 (Sat, 22 Mar 2008) | 1 line
Copied files from py3k w/o modifications
........
r61752 | christian.heimes | 2008-03-22 20:53:20 +0100 (Sat, 22 Mar 2008) | 7 lines
Take One
* Added initialization code, warnings, flags etc. to the appropriate places
* Added new buffer interface to string type
* Modified tests
* Modified Makefile.pre.in to compile the new files
* Added bytesobject.c to Python.h
........
r61754 | christian.heimes | 2008-03-22 21:22:19 +0100 (Sat, 22 Mar 2008) | 2 lines
Disabled bytearray.extend for now since it causes an infinite recursion
Fixed serveral unit tests
........
r61756 | christian.heimes | 2008-03-22 21:43:38 +0100 (Sat, 22 Mar 2008) | 5 lines
Added PyBytes support to several places:
str + bytearray
ord(bytearray)
bytearray(str, encoding)
........
r61760 | christian.heimes | 2008-03-22 21:56:32 +0100 (Sat, 22 Mar 2008) | 1 line
Fixed more unit tests related to type('') is not unicode
........
r61763 | christian.heimes | 2008-03-22 22:20:28 +0100 (Sat, 22 Mar 2008) | 2 lines
Fixed more unit tests
Fixed bytearray.extend
........
r61768 | christian.heimes | 2008-03-22 22:40:50 +0100 (Sat, 22 Mar 2008) | 1 line
Implemented old buffer interface for bytearray
........
r61772 | christian.heimes | 2008-03-22 23:24:52 +0100 (Sat, 22 Mar 2008) | 1 line
Added backport of the io module
........
r61775 | christian.heimes | 2008-03-23 03:50:49 +0100 (Sun, 23 Mar 2008) | 1 line
Fix str assignement to bytearray. Assignment of a str of size 1 is interpreted as a single byte
........
r61805 | christian.heimes | 2008-03-23 19:33:48 +0100 (Sun, 23 Mar 2008) | 3 lines
Fixed more tests
Fixed bytearray() comparsion with unicode()
Fixed iterator assignment of bytearray
........
r61809 | christian.heimes | 2008-03-23 21:02:21 +0100 (Sun, 23 Mar 2008) | 2 lines
str(bytesarray()) now returns the bytes and not the representation of the bytearray object
Enabled and fixed more unit tests
........
r61812 | christian.heimes | 2008-03-23 21:53:08 +0100 (Sun, 23 Mar 2008) | 3 lines
Clear error PyNumber_AsSsize_t() fails
Use CHARMASK for ob_svall access
disabled a test with memoryview again
........
r61819 | christian.heimes | 2008-03-23 23:05:57 +0100 (Sun, 23 Mar 2008) | 1 line
Untested updates to the PCBuild directory
........
r61917 | christian.heimes | 2008-03-26 00:57:06 +0100 (Wed, 26 Mar 2008) | 1 line
The type system of Python 2.6 has subtle differences to 3.0's. I've removed the Py_TPFLAGS_BASETYPE flags from bytearray for now. bytearray can't be subclasses until the issues with bytearray subclasses are fixed.
........
r61920 | christian.heimes | 2008-03-26 01:44:08 +0100 (Wed, 26 Mar 2008) | 2 lines
Disabled last failing test
I don't understand what the test is testing and how it suppose to work. Ka-Ping, please check it out.
........
r61930 | christian.heimes | 2008-03-26 12:46:18 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytes warning code
........
r61933 | christian.heimes | 2008-03-26 13:20:46 +0100 (Wed, 26 Mar 2008) | 1 line
Fixed a bug in the new buffer protocol. The buffer slots weren't copied into a subclass.
........
r61934 | christian.heimes | 2008-03-26 13:25:09 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytearray subclassing - all tests are passing.
........
This change implements a new bytecode compiler, based on a
transformation of the parse tree to an abstract syntax defined in
Parser/Python.asdl.
The compiler implementation is not complete, but it is in stable
enough shape to run the entire test suite excepting two disabled
tests.
bit by checking the value of UCHAR_MAX in Include/Python.h. There was a
check in Objects/stringobject.c. Remove that. (Note that we don't define
UCHAR_MAX if it's not defined as the old test did.)
* Install the unittests, docs, newsitem, include file, and makefile update.
* Exercise the new functions whereever sets.py was being used.
Includes the docs for libfuncs.tex. Separate docs for the types are
forthcoming.
This gets compilation of posixmodule.c to succeed on Tru64 and does no
harm on Linux. We may need to undefine it on some platforms, but
let's wait and see.
Martin says:
> I think it is generally the right thing to define _XOPEN_SOURCE on
> Unix, providing a negative list of systems that cannot support this
> setting (or preferably solving whatever problems remain).
>
> I'd put an (unconditional) AC_DEFINE into configure.in early on; it
> *should* go into confdefs.h as configure proceeds, and thus be active
> when other tests are performed.
This patch complies with the following request found
near the top of configure.in:
# This is for stuff that absolutely must end up in pyconfig.h.
# Please use pyport.h instead, if possible.
I tested this patch under Cygwin, Win32, and Red
Hat Linux. Python built and ran successfully on
each of these platforms.
This patch complies with the following request found
near the top of configure.in:
# This is for stuff that absolutely must end up in pyconfig.h.
# Please use pyport.h instead, if possible.
I tested this patch under Cygwin, Win32, and Red
Hat Linux. Python built and ran successfully on
each of these platforms.
PEP 285. Everything described in the PEP is here, and there is even
some documentation. I had to fix 12 unit tests; all but one of these
were printing Boolean outcomes that changed from 0/1 to False/True.
(The exception is test_unicode.py, which did a type(x) == type(y)
style comparison. I could've fixed that with a single line using
issubtype(x, type(y)), but instead chose to be explicit about those
places where a bool is expected.
Still to do: perhaps more documentation; change standard library
modules to return False/True from predicates.
When WITH_PYMALLOC is defined, define PYMALLOC_DEBUG to enable the debug
allocator. This can be done independent of build type (release or debug).
A debug build automatically defines PYMALLOC_DEBUG when pymalloc is
enabled. It's a detected error to define PYMALLOC_DEBUG when pymalloc
isn't enabled.
Two debugging entry points defined only under PYMALLOC_DEBUG:
+ _PyMalloc_DebugCheckAddress(const void *p) can be used (e.g., from gdb)
to sanity-check a memory block obtained from pymalloc. It sprays
info to stderr (see next) and dies via Py_FatalError if the block is
detectably damaged.
+ _PyMalloc_DebugDumpAddress(const void *p) can be used to spray info
about a debug memory block to stderr.
A tiny start at implementing "API family" checks isn't good for
anything yet.
_PyMalloc_DebugRealloc() has been optimized to do little when the new
size is <= old size. However, if the new size is larger, it really
can't call the underlying realloc() routine without either violating its
contract, or knowing something non-trivial about how the underlying
realloc() works. A memcpy is always done in this case.
This was a disaster for (and only) one of the std tests: test_bufio
creates single text file lines up to a million characters long. On
Windows, fileobject.c's get_line() uses the horridly funky
getline_via_fgets(), which keeps growing and growing a string object
hoping to find a newline. It grew the string object 1000 bytes each
time, so for a million-character string it took approximately forever
(I gave up after a few minutes).
So, also:
fileobject.c, getline_via_fgets(): When a single line is outrageously
long, grow the string object at a mildly exponential rate, instead of
just 1000 bytes at a time.
That's enough so that a debug-build test_bufio finishes in about 5 seconds
on my Win98SE box. I'm curious to try this on Win2K, because it has very
different memory behavior than Win9X, and test_bufio always took a factor
of 10 longer to complete on Win2K. It *could* be that the endless
reallocs were simply killing it on Win2K even in the release build.
that info to code dynamically compiled *by* code compiled with generators
enabled. Doesn't yet work because there's still no way to tell the parser
that "yield" is OK (unlike nested_scopes, the parser has its fingers in
this too).
Replaced PyEval_GetNestedScopes by a more-general
PyEval_MergeCompilerFlags. Perhaps I should not have? I doubted it was
*intended* to be part of the public API, so just did.
new slot tp_iter in type object, plus new flag Py_TPFLAGS_HAVE_ITER
new C API PyObject_GetIter(), calls tp_iter
new builtin iter(), with two forms: iter(obj), and iter(function, sentinel)
new internal object types iterobject and calliterobject
new exception StopIteration
new opcodes for "for" loops, GET_ITER and FOR_ITER (also supported by dis.py)
new magic number for .pyc files
new special method for instances: __iter__() returns an iterator
iteration over dictionaries: "for x in dict" iterates over the keys
iteration over files: "for x in file" iterates over lines
TODO:
documentation
test suite
decide whether to use a different way to spell iter(function, sentinal)
decide whether "for key in dict" is a good idea
use iterators in map/filter/reduce, min/max, and elsewhere (in/not in?)
speed tuning (make next() a slot tp_next???)
Add definitions of INT_MAX and LONG_MAX to pyport.h.
Remove includes of limits.h and conditional definitions of INT_MAX
and LONG_MAX elsewhere.
This closes SourceForge patch #101659 and bug #115323.
I can't test this, so I'm just checking it in with blind faith in Andy.
I've tested that it doesn't broeak a non-Pth build on Linux.
Changes include:
- There's a --with-pth configure option.
- Instead of _GNU_PTH, we test for HAVE_PTH.
- Better signal handling.
- (The config.h.in file is regenerated in a slightly different order.)
It's hard to sort out what the bug was, exactly. So, Big Hammer:
1. Python shouldn't be in the business of #define'ing NULL, period.
2. Users of the Python C API shouldn't be in the business of not including
Python.h, period.
Hence:
1. Removed all #define's of NULL in Python source code (pyport.h and
object.h).
2. Since we're *relying* on stdio.h defining NULL, put an #error in
Python.h after its #include of stdio.h if NULL isn't defined then.
Christian Heimes
Brett Cannon
Neal Norwitz
Travis E. Oliphant
Martin v. Löwis
Jeremy Hylton
Skip Montanaro
Tim Peters
Raymond Hettinger
Mark Hammond
Jason Tishler
Michael W. Hudson
Guido van Rossum
Fred Drake
Peter Schneider-Kamp