bpo-33671
* use memoryview() with size == file size on Windows, see https://github.com/python/cpython/pull/7160#discussion_r195405230
* release intermediate (sliced) memoryview immediately
* replace "OSX" occurrences with "macOS"
* add some unittests for copyfileobj()
with debuglevel=1 only the header keys got printed. With
this change the header values get printed as well and the single
header entries get '\n' as a separator.
Using gdbm 1.15, creating a database creates a file of 16 MiB. Adding
a small entry and then modifying the small entry doesn't change the
file size. Modify test_dbm_gnu to be less strict: allow that the file
size doesn't change.
In some development setups it is inconvenient or impossible to write bytecode
caches to the code tree, but the bytecode caches are still useful. The
PYTHONPYCACHEPREFIX environment variable allows specifying an alternate
location for cached bytecode files, within which a directory tree mirroring the code
tree will be created. This cache tree is then used (for both reading and writing)
instead of the local `__pycache__` subdirectory within each source directory.
Exposed at runtime as sys.pycache_prefix (defaulting to None), and can
be set from the CLI as "-X pycache_prefix=path".
Patch by Carl Meyer.
Create a template for minimally testing a tkinter-using module by importing it and instantiating its class(es). Add a test file for all non-startup IDLE modules. Edit existing files and update coverage. This is part 1 of 3, covering the 21 autocomplete to help modules and touching 33 idlelib files.
Fix "LC_ALL=C python3.7 -V": reset properly the command line parser
when the encoding changes after reading the Python configuration.
Fix pymain_read_conf(): use memset(0) to reset properly cmdline.
When Python is built with the intel control-flow protection flags,
-mcet -fcf-protection, gdb is not able to read the stack without
actually jumping inside the function. This means an extra
'next' command is required to make the $pc (program counter)
enter the function and make the stack of the function exposed to gdb.
Hangul composition check boundaries are wrong for the second character
([0x1161, 0x1176) instead of [0x1161, 0x1176]) and third character ((0x11A7, 0x11C3)
instead of [0x11A7, 0x11C3]).
* have shutil.copyfileobj use sendfile() if possible
* refactoring: use ctx manager
* add test with non-regular file obj
* emulate case where file size can't be determined
* reference _copyfileobj_sendfile directly
* add test for offset() at certain position
* add test for empty file
* add test for non regular file dst
* small refactoring
* leave copyfileobj() alone in order to not introduce any incompatibility
* minor refactoring
* remove old test
* update docstring
* update docstring; rename exception class
* detect platforms which only support file to socket zero copy
* don't run test on platforms where file-to-file zero copy is not supported
* use tempfiles
* reset verbosity
* add test for smaller chunks
* add big file size test
* add comment
* update doc
* update whatsnew doc
* update doc
* catch Exception
* remove unused import
* add test case for error on second sendfile() call
* turn docstring into comment
* add one more test
* update comment
* add Misc/NEWS entry
* get rid of COPY_BUFSIZE; it belongs to another PR
* update doc
* expose posix._fcopyfile() for OSX
* merge from linux branch
* merge from linux branch
* expose fcopyfile
* arg clinic for the win implementation
* convert path type to path_t
* expose CopyFileW
* fix windows tests
* release GIL
* minor refactoring
* update doc
* update comment
* update docstrings
* rename functions
* rename test classes
* update doc
* update doc
* update docstrings and comments
* avoid do import nt|posix modules if unnecessary
* set nt|posix modules to None if not available
* micro speedup
* update description
* add doc note
* use better wording in doc
* rename function using 'fastcopy' prefix instead of 'zerocopy'
* use :ref: in rst doc
* change wording in doc
* add test to make sure sendfile() doesn't get called aymore in case it doesn't support file to file copies
* move CopyFileW in _winapi and actually expose CopyFileExW instead
* fix line endings
* add tests for mode bits
* add docstring
* remove test file mode class; let's keep it for later when Istart addressing OSX fcopyfile() specific copies
* update doc to reflect new changes
* update doc
* adjust tests on win
* fix argument clinic error
* update doc
* OSX: expose copyfile(3) instead of fcopyfile(3); also expose flags arg to python
* osx / copyfile: use path_t instead of char
* do not set dst name in the OSError exception in order to remain consistent with platforms which cannot do that (e.g. linux)
* add same file test
* add test for same file
* have osx copyfile() pre-emptively check if src and dst are the same, otherwise it will return immedialtey and src file content gets deleted
* turn PermissionError into appropriate SameFileError
* expose ERROR_SHARING_VIOLATION in order to raise more appropriate SameFileError
* honour follow_symlinks arg when using CopyFileEx
* update Misc/NEWS
* expose CreateDirectoryEx mock
* change C type
* CreateDirectoryExW actual implementation
* provide specific makedirs() implementation for win
* fix typo
* skeleton for SetNamedSecurityInfo
* get security info for src path
* finally set security attrs
* add unit tests
* mimick os.makedirs() behavior and raise if dst dir exists
* set 2 paths for OSError object
* set 2 paths for OSError object
* expand windows test
* in case of exception on os.sendfile() set filename and filename2 exception attributes
* set 2 filenames (src, dst) for OSError in case copyfile() fails on OSX
* update doc
* do not use CreateDirectoryEx() in copytree() if source dir is a symlink (breaks test_copytree_symlink_dir); instead just create a plain dir and remain consistent with POSIX implementation
* use bytearray() and readinto()
* use memoryview() with bytearray()
* refactoring + introduce a new _fastcopy_binfileobj() fun
* remove CopyFileEx and other C wrappers
* remove code related to CopyFileEx
* Recognize binary files in copyfileobj()
...and use fastest _fastcopy_binfileobj() when possible
* set 1MB copy bufsize on win; also add a global _COPY_BUFSIZE variable
* use ctx manager for memoryview()
* update doc
* remove outdated doc
* remove last CopyFileEx remnants
* OSX - use fcopyfile(3) instead of copyfile(3)
...as an extra safety measure: in case src/dst are "exotic" files (non
regular or living on a network fs etc.) we better fail on open() instead
of copyfile(3) as we're not quite sure what's gonna happen in that
case.
* update doc
When attempting to base64-decode a payload of invalid length (1 mod 4),
properly recognize and handle it. The given data will be returned as-is,
i.e. not decoded, along with a new defect, InvalidBase64LengthDefect.
The documentation for CERT_NONE, CERT_OPTIONAL, and CERT_REQUIRED were
misleading and partly wrong. It fails to explain that OpenSSL behaves
differently in client and server mode. Also OpenSSL does validate the
cert chain everytime. With SSL_VERIFY_NONE a validation error is not
fatal in client mode and does not request a client cert in server mode.
Also discourage people from using CERT_OPTIONAL in client mode.
On Windows 8.1+ or 10, with DPI compatibility properties of the Python binary
unchanged, and a monitor resolution greater than 96 DPI, this should
make text and lines sharper. It should otherwise have no effect.
Using a magnifier, I determined that the improvement comes from horizontal and
lines being better lined up with the monitor pixels. I checked that this call causes
no problem on any Windows buildbot, including the Win7 buildbots. Unlike most
IDLE patches, this one can be easily reverted by users by removing a few lines,
at the top of idlelib/pyshell.py.
Before Python 3.6, os.path.abspath(None) used to report an AttributeError which was properly caught inside site.abs_paths, making it ignore __main__, one of sys.modules, which has __file__ and __cached__ set to None. With 3.6, os.path.abspath(None) raises TypeError instead which site.abs_path was not expecting. This resulted in an uncaught exception if a user had PYTHONSTARTUP set and the application called site.main() which a number of third-party programs do.
A datetime object d is aware if d.tzinfo is not None and
d.tzinfo.utcoffset(d) does not return None. If d.tzinfo is None,
or if d.tzinfo is not None but d.tzinfo.utcoffset(d) returns None,
d is naive.
This commit ensures that instances with non-None d.tzinfo, but
d.tzinfo.utcoffset(d) returning None are treated as naive.
In addition, C acceleration code will raise TypeError if
d.tzinfo.utcoffset(d) returns an object with the type other than
timedelta.
* Updated the documentation.
Assume that the term "naive" is defined elsewhere and remove the
not entirely correct clarification. Thanks, Tim.
During development of the limited API support for PySide,
we saw an error in a macro that accessed a type field.
This patch fixes the 7 errors in the Python headers.
Macros which were not written as capitals were implemented
as function.
To do the necessary analysis again, a script was included that
parses all headers and looks for "->tp_" in serctions which can
be reached with active limited API.
It is easily possible to call this script as a test.
Error listing:
../../Include/objimpl.h:243
#define PyObject_IS_GC(o) (PyType_IS_GC(Py_TYPE(o)) && \
(Py_TYPE(o)->tp_is_gc == NULL || Py_TYPE(o)->tp_is_gc(o)))
Action: commented only
../../Include/objimpl.h:362
#define PyType_SUPPORTS_WEAKREFS(t) ((t)->tp_weaklistoffset > 0)
Action: commented only
../../Include/objimpl.h:364
#define PyObject_GET_WEAKREFS_LISTPTR(o) \
((PyObject **) (((char *) (o)) + Py_TYPE(o)->tp_weaklistoffset))
Action: commented only
../../Include/pyerrors.h:143
#define PyExceptionClass_Name(x) \
((char *)(((PyTypeObject*)(x))->tp_name))
Action: implemented function
../../Include/abstract.h:593
#define PyIter_Check(obj) \
((obj)->ob_type->tp_iternext != NULL && \
(obj)->ob_type->tp_iternext != &_PyObject_NextNotImplemented)
Action: implemented function
../../Include/abstract.h:713
#define PyIndex_Check(obj) \
((obj)->ob_type->tp_as_number != NULL && \
(obj)->ob_type->tp_as_number->nb_index != NULL)
Action: implemented function
../../Include/abstract.h:924
#define PySequence_ITEM(o, i)\
( Py_TYPE(o)->tp_as_sequence->sq_item(o, i) )
Action: commented only
While locale coercion and UTF-8 mode turned out to
be complementary ideas rather than competing ones,
it isn't immediately obvious why it's useful to
have both, or how they interact at runtime.
This updates both the Python 3.7 What's New doc
and the PYTHONCOERCECLOCALE and PYTHONUTF8
documentation in an attempt to clarify that
relationship:
- in the respective What's New sections, add a closing paragraph
explaining which problem each one solves, and pointing to the
other PEP's section for the specific aspects it relies on the other
PEP to solve
- use "locale-aware mode" as a more descriptive term for the
default non-UTF-8 mode
- improve wording conistenccy between the PYTHONCOERCECLOCALE
and PYTHONUTF8 docs when they cover the same thing (mostly
related to legacy locale detection and setting the standard
stream error handler)
- improve the description of the locale coercion trigger conditions
(including pointing out that setting LC_ALL turns off locale coercion)
- port the full description of the UTF-8 mode behaviour changes
from PEP 540 into the PYTHONUTF8 documentation
- be explicit that PYTHONIOENCODING still overrides the settings
for the standard streams
- mention concrete examples of things that do and don't get their
text encoding assumptions adjusted by the two text encoding
assumption override techniques
- bugfix and test for fragile metavar handling in argparse (see
bpo-24089, bpo-14046, bpo-25058, bpo-11874)
- also fixes some incorrect tests that did not make 1-element tuples correctly
The cancellation of an overlapped WSARecv() has a race condition
which causes data loss because of the current implementation of
proactor in asyncio.
No longer cancel overlapped WSARecv() in _ProactorReadPipeTransport
to work around the race condition.
Remove the optimized recv_into() implementation to get simple
implementation of pause_reading() using the single _pending_data
attribute.
Move _feed_data_to_bufferred_proto() to protocols.py.
Remove set_protocol() method which became useless.
Terry Jan Reedy
Victor Stinner
Giampaolo Rodola
Marco Strigl
INADA Naoki
ValeriyaSinevich
Stéphane Wirtel
Carl Meyer
Andrés Delfino
Marcel Plch
Wonsup Yoon
Serhiy Storchaka
Eric Snow
Cheryl Sabella
Tal Einat
Christian Heimes
Matthias Bussonnier
Ned Deily
Steve Weber
Christian Tismer
Alexander Belopolsky
Nick Coghlan
Yury Selivanov
Thomas Kluyver
Dong-hee Na
Elvis Pranskevichus
wim glenn
Scott Sanderson