test_openssl_version now accepts version 3.0.0.
getpeercert() no longer returns IPv6 addresses with a trailing new line.
Signed-off-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue38820
Make ssl tests less strict and also accept TLSv3 as the default maximum
version. This change unbreaks test_min_max_version on Fedora 32.
https://bugs.python.org/issue38815
test_ssl now handles disabled TLS/SSL versions better. OpenSSL's crypto
policy and run-time settings are recognized and tests for disabled versions
are skipped.
Signed-off-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue38275
Accumulate certificates in a set instead of doing a costly list contain
operation. A Windows cert store can easily contain over hundred
certificates. The old code would result in way over 5,000 comparison
operations
Signed-off-by: Christian Heimes <christian@python.org>
test_ssl.test_pha_required_nocert() now uses
support.catch_threading_exception() to ignore the expected SSLError
in ConnectionHandler of ThreadedEchoServer (it is only raised
sometimes on Windows).
ssl.match_hostname() no longer accepts IPv4 addresses with additional text
after the address and only quad-dotted notation without trailing
whitespaces. Some inet_aton() implementations ignore whitespace and all data
after whitespace, e.g. '127.0.0.1 whatever'.
Short notations like '127.1' for '127.0.0.1' were already filtered out.
The bug was initially found by Dominik Czarnota and reported by Paul Kehrer.
Signed-off-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue37463
SSLContext.post_handshake_auth = True no longer sets
SSL_VERIFY_POST_HANDSHAKE verify flag for client connections. Although the
option is documented as ignored for clients, OpenSSL implicitly enables cert
chain validation when the flag is set.
Signed-off-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue37428
Modify test_coroutines, test_cprofile, test_generators, test_raise,
test_ssl and test_yield_from to use
support.catch_unraisable_exception() rather than
support.captured_stderr().
test_thread: remove test_save_exception_state_on_error() which is now
updated. test_unraisable_exception() checks that sys.unraisablehook()
is called to handle _thread.start_new_thread() exception.
test_cprofile now rely on unittest for test discovery: replace
support.run_unittest() with unittest.main().
The ssl module now can dump key material to a keylog file and trace TLS
protocol messages with a tracing callback. The default and stdlib
contexts also support SSLKEYLOGFILE env var.
The msg_callback and related enums are private members. The feature
is designed for internal debugging and not for end users.
Signed-off-by: Christian Heimes <christian@python.org>
Fix test_ssl for strict OpenSSL configuration like RHEL8 strict crypto policy.
Use older TLS version for minimum TLS version of the server SSL context if
needed, to test TLS version older than default minimum TLS version.
Make ssl tests less strict and also accept TLSv1 as system default. The
changes unbreaks test_min_max_version on Fedora 29.
Signed-off-by: Christian Heimes <christian@python.org>
Fix a NULL pointer deref in ssl module. The cert parser did not handle CRL
distribution points with empty DP or URI correctly. A malicious or buggy
certificate can result into segfault.
Signed-off-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue35746
Add SSLContext.post_handshake_auth and
SSLSocket.verify_client_post_handshake for TLS 1.3 post-handshake
authentication.
Signed-off-by: Christian Heimes <christian@python.org>q
https://bugs.python.org/issue34670
OpenSSL follows the convention that whenever you call a function, it
returns an error indicator value; and if this value is negative, then
you need to go look at the actual error code to see what happened.
Commit c6fd1c1c3a introduced a small mistake in
_ssl__SSLSocket_shutdown_impl: instead of checking whether the error
indicator was negative, it started checking whether the actual error
code was negative, and it turns out that the error codes are never
negative. So the effect was that 'unwrap()' lost the ability to raise
SSL errors.
https://bugs.python.org/issue34759
* Replace "master process" with "parent process"
* Replace "master option mappings" with "main option mappings"
* Replace "master pattern object" with "main pattern object"
* ssl: replace "master" with "server"
* And some other similar changes
Update all test certs and keys to use future proof crypto settings:
* 3072 bit RSA keys
* SHA-256 signature
Signed-off-by: Christian Heimes <christian@python.org>
Downstream vendors have started to deprecate weak keys. Update all RSA keys
and DH params to use at least 2048 bits.
Finite field DH param file use RFC 7919 values, generated with
certtool --get-dh-params --sec-param=high
Signed-off-by: Christian Heimes <christian@python.org>
The documentation for CERT_NONE, CERT_OPTIONAL, and CERT_REQUIRED were
misleading and partly wrong. It fails to explain that OpenSSL behaves
differently in client and server mode. Also OpenSSL does validate the
cert chain everytime. With SSL_VERIFY_NONE a validation error is not
fatal in client mode and does not request a client cert in server mode.
Also discourage people from using CERT_OPTIONAL in client mode.
TLS 1.3 behaves slightly different than TLS 1.2. Session tickets and TLS
client cert auth are now handled after the initialy handshake. Tests now
either send/recv data to trigger session and client certs. Or tests
ignore ConnectionResetError / BrokenPipeError on the server side to
handle clients that force-close the socket fd.
To test TLS 1.3, OpenSSL 1.1.1-pre7-dev (git master + OpenSSL PR
https://github.com/openssl/openssl/pull/6340) is required.
Signed-off-by: Christian Heimes <christian@python.org>
Change TLS 1.3 cipher suite settings for compatibility with OpenSSL
1.1.1-pre6 and newer. OpenSSL 1.1.1 will have TLS 1.3 cipers enabled by
default.
Also update multissltests and Travis config to test with latest OpenSSL.
Signed-off-by: Christian Heimes <christian@python.org>
Harden ssl module against LibreSSL CVE-2018-8970.
X509_VERIFY_PARAM_set1_host() is called with an explicit namelen. A new test
ensures that NULL bytes are not allowed.
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
ssl.match_hostname() has been simplified and no longer depends on re and
ipaddress module for wildcard and IP addresses. Error reporting for invalid
wildcards has been improved.
Signed-off-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
Add test cases for IDNA 2003 and 2008 host names. IDNA 2003
internationalized host names are working since bpo-31399 has landed. IDNA
2008 deviations are still broken and will be fixed in another patch.
Signed-off-by: Christian Heimes <christian@python.org>
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
Add test certs and test for ECDSA cert and EC/RSA dual mode.
I'm also adding certs for IDNA 2003/2008 tests and simplify some test
data handling.
Signed-off-by: Christian Heimes <christian@python.org>
Christian Heimes
torsava
Serhiy Storchaka
Victor Stinner
Zackery Spytz
Paul Monson
penguindustin
Giampaolo Rodola
Srinivas Thatiparthy (శ్రీనివాస్ తాటిపర్తి)
Nathaniel J. Smith
Ned Deily
Petr Viktorin