_feed_data_to_bufferred_proto() renamed to
_feed_data_to_buffered_proto() ("bufferred" => "buffered").
Typo spotted by Nathaniel J. Smith.
(cherry picked from commit ff6c077292)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
The cancellation of an overlapped WSARecv() has a race condition
which causes data loss because of the current implementation of
proactor in asyncio.
No longer cancel overlapped WSARecv() in _ProactorReadPipeTransport
to work around the race condition.
Remove the optimized recv_into() implementation to get simple
implementation of pause_reading() using the single _pending_data
attribute.
Move _feed_data_to_bufferred_proto() to protocols.py.
Remove set_protocol() method which became useless.
(cherry picked from commit 79790bc35f)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
In addition to that, mark SSLTransport as "closed" in its "abort()" method to prevent bogus warnings.
(cherry picked from commit 415bc46a78)
Co-authored-by: Yury Selivanov <yury@magic.io>
* Fix AttributeError (not all SSL exceptions have 'errno' attribute)
* Increase default handshake timeout from 10 to 60 seconds
* Make sure start_tls can be cancelled correctly
* Make sure any error in SSLProtocol gets propagated (instead of just being logged)
(cherry picked from commit 9602643120)
Co-authored-by: Yury Selivanov <yury@magic.io>
Currently, asyncio.wait_for(fut), upon reaching the timeout deadline,
cancels the future and returns immediately. This is problematic for
when *fut* is a Task, because it will be left running for an arbitrary
amount of time. This behavior is iself surprising and may lead to
related bugs such as the one described in bpo-33638:
condition = asyncio.Condition()
async with condition:
await asyncio.wait_for(condition.wait(), timeout=0.5)
Currently, instead of raising a TimeoutError, the above code will fail
with `RuntimeError: cannot wait on un-acquired lock`, because
`__aexit__` is reached _before_ `condition.wait()` finishes its
cancellation and re-acquires the condition lock.
To resolve this, make `wait_for` await for the task cancellation.
The tradeoff here is that the `timeout` promise may be broken if the
task decides to handle its cancellation in a slow way. This represents
a behavior change and should probably not be back-patched to 3.6 and
earlier.
(cherry picked from commit e2b340ab41)
Co-authored-by: Elvis Pranskevichus <elvis@magic.io>
Use transport.set_write_buffer_limits() in sendfile tests of
test_asyncio to make sure that the protocol is paused after sending
4 KiB. Previously,
test_sendfile_fallback_close_peer_in_the_middle_of_receiving() failed
on FreeBSD if the DATA was smaller than the default limit of 64 KiB.
(cherry picked from commit 9551f77192)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
Fix a race condition in SSLProtocol.connection_made() of
asyncio.sslproto: start immediately the handshake instead of using
call_soon(). Previously, data_received() could be called before the
handshake started, causing the handshake to hang or fail.
(cherry picked from commit be00a5583a)
Co-authored-by: Victor Stinner <vstinner@redhat.com>
In this commit:
* Support BufferedProtocol in set_protocol() and start_tls()
* Fix proactor to cancel readers reliably
* Update tests to be compatible with OpenSSL 1.1.1
* Clarify BufferedProtocol docs
* Bump TLS tests timeouts to 60 seconds; eliminate possible race from start_serving
* Rewrite test_start_tls_server_1
(cherry picked from commit dbf102271f)
Co-authored-by: Yury Selivanov <yury@magic.io>
Fixed bug where calling write_eof() on a _SelectorSocketTransport after
it's already closed raises AttributeError.
(cherry picked from commit 23f587e395)
Co-authored-by: twisteroid ambassador <twisteroidambassador@users.noreply.github.com>
* bpo-33263 Fix FD leak in _SelectorSocketTransport. (GH-6450)
Under particular circumstances _SelectorSocketTransport can try to add a reader
even the transport is already being closed. This can lead to FD leak and
invalid stated of the following connections. Fixed the SelectorSocketTransport
to add the reader only if the trasport is still active.
(cherry picked from commit a84d0b361a)
Co-authored-by: Vlad Starostin <drtyrsa@yandex.ru>
Fix the following bugs in the C implementation:
* get_future_loop() silenced all exceptions raised when look up the get_loop
attribute, not just an AttributeError.
* enter_task() silenced all exceptions raised when look up the current task,
not just a KeyError.
* repr() was called for a borrowed link in enter_task() and task_step_impl().
* str() was used instead of repr() in formatting one error message (in
Python implementation too).
* There where few reference leaks in error cases.
(cherry picked from commit 6655354afc)
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
The proactor event loop has a race condition when reading with
pausing/resuming. `resume_reading()` unconditionally schedules the read
function to read from the current future. If `resume_reading()` was
called before the previously scheduled done callback fires, this results
in two attempts to get the data from the most recent read and an
assertion failure. This commit tracks whether or not `resume_reading`
needs to reschedule the callback to restart the loop, preventing a
second attempt to read the data.
(cherry picked from commit 4151061855)
Co-authored-by: CtrlZvi <viz+github@flippedperspective.com>
* Skip write()/data_received() if sslpipe is destroyed
(cherry picked from commit 5e80a71ab6)
Co-authored-by: Andrew Svetlov <andrew.svetlov@gmail.com>
* Support sendfile on Windows Proactor event loop naively.
(cherry picked from commit a19fb3c6aa)
Co-authored-by: Andrew Svetlov <andrew.svetlov@gmail.com>
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32662: Implement Server.start_serving() and Server.serve_forever()
New methods:
* Server.start_serving(),
* Server.serve_forever(), and
* Server.is_serving().
Add 'start_serving' keyword parameter to loop.create_server() and
loop.create_unix_server().
Specifically, it's not possible to subclass Task/Future classes
and override the following methods:
* Future._schedule_callbacks
* Task._step
* Task._wakeup
* Add coro.cr_origin and sys.set_coroutine_origin_tracking_depth
* Use coroutine origin information in the unawaited coroutine warning
* Stop using set_coroutine_wrapper in asyncio debug mode
* In BaseEventLoop.set_debug, enable debugging in the correct thread
Miss Islington (bot)
Yury Selivanov
Serhiy Storchaka
Andrew Svetlov
Christian Heimes
José Melero Fernández
Nathaniel J. Smith
Srinivas Reddy Thatiparthy (శ్రీనివాస్ రెడ్డి తాటిపర్తి)