3cf4eb4e3d
Specify: \geq --> ≥
...
\leq --> ≤
\LaTeX --> LaTeX (just text)
\TeX --> TeX (just text)
1999-08-26 17:56:47 +00:00
f6199edcd3
Conversion.subconvert(): Added support for "entityref" parameters
...
(must be named in the conversion spec.).
TableParser.start_entityref(): New method. Use to support creating
entity references via the conversion specification.
1999-08-26 17:54:16 +00:00
a20581c1e5
write_esis(): Added support for ENTITY_REFERENCE nodes.
1999-08-26 17:51:56 +00:00
53eae8e81b
convert(): Add support for ESIS '&' lines, and make sure we don't
...
silently ignore unrecognized lines.
1999-08-26 17:50:26 +00:00
abf8a1daa8
rewrite_descriptor(): Fix bug that dropped the first TEXT node from
...
<description> elements. Add another sanity
check to make sure a special case only becomes
involved for <opcodedesc> and <opcodedescni>
elements.
fixup_paras_helper(): Clean up control flow.
Everywhere that checks node.nodeType==ELEMENT and node.tagName now
just check node.nodeName (nodeName is guaranteed for all node types
and will be special values that don't conflict with GIs for
non-ELEMENT nodes). Simplifies a number of tests and improves
readability in a lot of places.
1999-08-20 14:28:29 +00:00
46ab6dfa89
Re-write in Python for portability. About 30% slower, but who cares?!
1999-08-03 17:54:39 +00:00
82ebc27357
remap_element_names(): Only used for things that the new conversion
...
engine in latex2esis.py can do, so discard it.
paragraph detection & markup: Handle some of the list-like
environments properly, picking up paragraphs inside
list items. (Only changed a few element-sets used for
recognition.)
fixup_refmodindexes_chunk(): Use the right attribute to determine the
module a <ref*modindex/> element is referring to.
convert(): Don't call remap_element_names(); it was removed.
1999-08-03 15:32:48 +00:00
2f6ec9ca81
The new conversion engine supports more of the table re-writing than
...
the old one, so use it.
1999-08-03 15:27:37 +00:00
9ff3a6a6e7
Remove obsolete version of script.
1999-08-02 20:19:42 +00:00
9f2b42080a
Re-implementation of mktarball.sh as a more portable Python script;
...
with a more descriptive name.
Allow creation of multiple archive formats with a single pass; useful
in this case since it uses a fresh export/checkout from CVS to ensure
that the tree is "clean" (no build turds, saved files, &c). Use --all
to create all supported formats.
1999-08-02 20:19:17 +00:00
080c1b5af6
bwrite(), ewrite(): Helpers for diagnostic output; essentially the
...
same as sys.stderr.write(), but bwrite() will make it
bold if stderr is a tty (for visibility).
Use these everywhere instead of accessing
sys.stderr.write() directly.
find_all_child_elements(): Find all elements by type name that are
immediate children of another.
cleanup_synopses(): Receive both the document and fragment objects as
parameters; if only the document is passed, synopsis
information is never found since it's in the fragment!
build_para(): Add a chunk of code to ensure that a newline always
follows the </para> end-tag. Not really important, but
makes presentation consistent for authoring/
maintenance.
fixup_bifuncindexes_chunk(): Use find_all_child_elements() instead of
find_all_elements() so we don't work with too many
levels at once; that could cause DOM exceptions with
the <elem>.removeChild() method.
1999-08-02 14:46:15 +00:00
4fbdf9779c
Mostly minor changes.
...
Removed some obsolete commented-out code.
Merged BaseConversion into Conversion since there's only one
conversion process now.
Remove push/pop of output stream; it's no longer needed.
1999-08-02 14:35:25 +00:00
d158b85896
This doesn't need to do nearly as much for the new conversion, so
...
simplify.
1999-08-02 14:32:46 +00:00
031e222499
A few small improvements to the conversion.
1999-08-02 14:32:11 +00:00
eac8abee4e
Ripped out the old conversion.
1999-07-29 22:42:27 +00:00
865e9ff98e
Added a few more passes through the document fragment. Not actually
...
very interesting.
1999-07-29 22:23:19 +00:00
96e4a06fa6
Massive changes.
...
Separate the Conversion class into a base and a subclass; the subclass
is pretty minimal but the separation is useful for....
NewConversion: New class that implements a somewhat different
approach to the conversion. This uses a table of
instances (rather than tuples) that have more
information than the tuples used for the older
conversion procedure. This allows a lot more control
over the conversion, and it seems to be pretty
stable.
TableEntry,
Parameter: New classes that are used to build the conversion
specification used by NewConversion.
TableParser: xmllib.XMLParser subclass that builds a conversion
specification from an XML document.
load_table(): Convenience function that loads a table from a file.
main(): Added flags --new and --old; these select which conversion is
used. The default is --new.
Several fixes have been made in the old conversion as well; these were
done before writing & switching to the new conversion, and should be
archived.
The next checkin of this file will discard the old conversion; is is
kept in this checkin to allow it to be retrieved if needed, and to
avoid lossing the bugfixes that have been made to it in the interim.
1999-07-29 22:22:13 +00:00
2394c98c05
Minor updates.
1999-07-29 22:14:09 +00:00
ada2de67b3
Use the (new) buildFragment() method of the EsisBuilder rather than
...
implementing it all here.
1999-07-29 22:13:31 +00:00
f032cdbb24
Some minor cleanup.
1999-07-29 22:03:52 +00:00
bc2285eb60
Conversion specification, used by a new path through latex2esis.py.
...
The specific markup conversion is coded here instead of an even more
cryptic table in the code of latex2esis.py.
1999-07-29 22:03:11 +00:00
478a265057
Minor update.
1999-07-29 22:01:39 +00:00
5772f33b6c
Add support for bzip2 using --bzip2.
1999-07-27 16:29:30 +00:00
8ea15f3495
Add --zip parameter; make this able to produce .zip files as well as
...
.tgz files.
1999-07-23 16:09:11 +00:00
06c5a8b52e
Make the default target xml instead of sgml.
1999-07-22 13:57:12 +00:00
7dbde51f97
Make the default target xml instead of sgml.
...
Use a temporary file to pass results from latex2esis.py to
docfixer.py; this makes for better error detection by make (if the
first pipeline stage fails, make wasn't catching it).
1999-07-22 13:56:51 +00:00
924b42de9c
When looking for things that might be modules, include *module.c from
...
the Modules/ directory. Most of the remaining undocumented modules
seem to be living there.
1999-06-17 18:49:18 +00:00
0eb7b2a659
Enhanced docstring and some comments.
...
_begin_macro_rx: Fixed RE that didn't properly allow a space after
the name of the macro. This affects the conversion
of the tutorial.
1999-05-19 17:37:37 +00:00
c4811d8208
Modify to perform "---" to "—" conversion outside of
...
verbatim-like environments. The list of verbatim-like environments is
a defined by a variable in main().
1999-05-18 17:34:51 +00:00
c41e1e5f5e
Remove the "---" to "—" conversion; this is wrong in verbatim
...
environments. Move the conversion to esis2sgml.py.
1999-05-18 17:33:01 +00:00
e779d4f03b
Lots of adjustments to deal with the document content now being stored
...
in a fragment rather than the main document object.
1999-05-10 19:36:52 +00:00
54fb7fb9d0
Some more fixes.
...
Add controls for some of the esoteric indexing macros.
1999-05-10 19:36:03 +00:00
2697694e4a
ExtendedEsisBuilder.push(): Override inherited definition. We don't
...
want to push nodes into the document, but into a document
fragment, since we're not necesarily working with something
that's well-formed.
1999-05-07 21:14:28 +00:00
f79acbdaa1
Fix some bugs introduced in the previous checkin.
1999-05-07 21:12:21 +00:00
96c00b0b5e
Define & use a Conversion object. It's still really ugly, but at
...
least there's a token object in here now! ;-)
1999-05-07 19:59:02 +00:00
a871c2e747
Make it work for "manual" documents as well as "howto" documents.
...
This still doesn't understand anything about multiple source files or
checking time dependencies.
1999-05-06 19:37:38 +00:00
4437fdf265
Make sure latex2html doesn't produce a hard link between foo/foo.html
...
and foo/index.html. Make a copy instead. (Appearantly some tar
openers on non-Unixlike systems can't handle hard links.)
1999-05-03 14:29:07 +00:00
d2d1eef025
Make sure latex2html doesn't produce a hard link from $part/$part.html
...
and $part/index.html. Make a copy instead. (Appearantly some tar
openers on non-Unixlike systems can't handle hard links.)
1999-05-03 14:27:45 +00:00
c1db512b2b
Nasty hack to add a --numeric parameter to skip the use of "logical"
...
names.
1999-04-29 18:28:48 +00:00
c4a623ebdc
Add command line flags to just list the files that contain the
...
offending lines or to include line numbers in the output.
1999-04-22 20:32:21 +00:00
693a2c6581
Script to locate uses of \module where the module referred to is not
...
the module being documented at that point in the documentation; these
are candidates for conversion to \refmodule, which produces a
hyperlink in the HTML and PDF versions of the output.
1999-04-22 13:08:09 +00:00
c260c0bcdb
Further refinement, to allow this to handle the library reference as
...
well as the other "manual" documents.
1999-04-14 13:13:32 +00:00
79d41ccdd3
Add some support for the module index, so this can be used to build
...
the .aux file for any of the "manual" class documents.
1999-04-14 05:02:06 +00:00
2e1094e4ef
Use #!/usr/bin/env python instead of #!/usr/local/bin/python.
1999-04-09 14:53:35 +00:00
e3fd1064de
Make this simpler; don't care about the paper size. Require that the
...
files exist in the current directory.
Add "Documenting Python" to the list of documents listed.
1999-03-18 14:57:53 +00:00
87a42cd61b
Add support for <platform>, some cleanup of module section after
...
creating the <moduleinfo>.
1999-03-11 17:35:12 +00:00
1acb8740eb
Oops, missed a couple of substitutions in the templates.
1999-03-04 21:33:55 +00:00
5f7832d125
Allow many more aspects of the generated page to be parameterized, and
...
add a useful usage message. Use 'mkmodindex --help' to display it.
1999-03-04 21:19:57 +00:00
aaa0d9a3a4
Record the value of $TEXINPUTS in the transcript.
...
Job.message(): New method. Takes care of writing a message to the
user and adding it to the transcript.
1999-03-03 21:57:58 +00:00
b1d839866c
Obsolete; use the Python version instead.
1999-03-03 20:28:17 +00:00
8b88093b95
Re-written mkhowto in Python; this should be at least a little more
...
portable.
Several things that had been done by running a python script are now a
matter of importing the right module and running a function with a few
parameters.
1999-03-03 20:24:30 +00:00
749f943a6b
process(): New function that contains the "orchestration" of the
...
actual work.
main(): Just handle the command line and filename determination,
calling process() to do the work.
These changes make this more import-friendly.
1999-03-03 19:36:23 +00:00
7c8754fafb
process(): New function that contains the "orchestration" of the
...
actual work.
main(): Just handle the command line and filename determination,
calling process() to do the work.
These changes make this more import-friendly.
1999-03-03 19:25:56 +00:00
7f492ad7b8
Be more flexible to support platform annotations.
1999-03-02 16:22:56 +00:00
75ab7a6fa4
Clean up *.pla files -- platform annotation information.
1999-03-02 16:22:26 +00:00
093c97a36f
ignore_from_idx(): Fixed bug in regular expression.
1999-02-24 18:39:47 +00:00
2ef38a7a42
Script to combine module index files. Given a list of files that look
...
like modindex.html, create a combined modindex.html file that lists
all the modules. Takes the same parameters as buildindex.py.
1999-02-24 17:33:07 +00:00
711fe02ac3
process_nodes(): New function.
...
main(): Moved the node processing between input and ouptut to
process_nodes().
1999-02-24 16:36:48 +00:00
b6cf9a4fc4
Script to help identify undocumented modules. Use -h or --help for
...
usage information.
1999-02-23 23:07:48 +00:00
93d762fc7a
Mark <verbatim> elements that represent interactive sessions; these
...
become <interpreter-session> elements.
1999-02-18 16:32:21 +00:00
997eec7cca
Minor adjustments to reflect esis2sgml.py changes.
...
Added "esis" target to only generate the ESIS data.
1999-02-18 16:31:05 +00:00
607aed7a2c
Some adjustments, mostly to make it more general.
1999-02-18 16:30:16 +00:00
4cc902f464
Make the _rmtt regular expression deal with the new CSS-friendly
...
changes to the HTML documentation.
1999-02-18 16:11:12 +00:00
f6838c0f5e
Copy in the stylesheet after latex2html is done.
1999-02-16 20:43:53 +00:00
fcf57ad959
Copy in the stylesheet after latex2html is done.
1999-02-16 20:28:25 +00:00
f43ce00531
Make sure errors get propogated.
1999-02-16 20:05:43 +00:00
efa641c45a
Add an optional parameter to make the script run latex only once to
...
generate an .aux file. This can make HTML generation a bit faster
when print formats aren't needed.
Explained parameters in a comment.
1999-02-15 19:27:07 +00:00
3618c14f72
Use a common definition for $(SUBMAKE) instead of repeating everything
...
all over the place.
1999-02-15 16:50:28 +00:00
5d59d3df7f
Added --l2h-config option to add additional initialization files for
...
latex2html. Can be useful in setting up things like the upward
external link for the top of the documents.
1999-02-15 16:27:42 +00:00
ec5c0b41ae
Revert previous change; there's a better way to do it.
1999-02-10 17:08:00 +00:00
dfb4e24431
Respond to suggestion from "Albert" <hat@se-46.wpa.wtb.tue.nl> to add
...
document titles to the list of files.
Also added total page count and a note that comments should be
directed to python-docs@python.org .
1999-02-05 20:50:59 +00:00
bb79438d26
This seems to fix a problem with targeting from the indexes.
1999-02-02 18:57:12 +00:00
7281b3b779
Updated comments on version of XML package needed.
1999-01-29 22:35:23 +00:00
1dd152d036
Added support to handle \versionadded in a reasonable way.
1999-01-29 22:12:29 +00:00
279ca75a5b
Be a little smarter on some attribute values, making an assumption about
...
the DTD.
1999-01-29 21:35:50 +00:00
3a7ff998ac
fixup_descriptors(): Change the way we look for descriptor nodes;
...
this takes 5 minutes off the conversion of the whole tree by
reducing the number of tree-traversals from 14 to 1.
1999-01-29 21:31:12 +00:00
666e60095b
Added the Doc/sgml/ directory to the tarball.
1999-01-29 21:22:55 +00:00
cb65781d93
Rewrite code that converts the little descriptor environments to build
...
the right <signature>s and <description>. This seems to work a lot
better now!
1999-01-29 20:55:07 +00:00
75930b31e2
Added table entries for \funcline and \funclineni.
1999-01-29 20:09:27 +00:00
fdfd50f815
Convert <version> to &version;.
1999-01-29 16:29:25 +00:00
7dab6affba
Update the docstring.
...
Lots of changes to get the paragraph marking to work, and not go into
an infinite recursion.
Start to rationalize markup of method signatures; not complete.
find_all_elements(): similar to getElementsByTagName(), but operates
on the not-quite-legal fragments we deal with here.
Simplifies several individual transforms.
fixup_sectionauthors(): Convert \sectionauthor items to <author> just
after the <section>'s <title>.
1999-01-28 23:59:58 +00:00
3f3b09657f
Added table entries for \methodline, \methodlineni.
1999-01-28 23:49:37 +00:00
1453a8caf9
Constructor arguments for classes should be called <args>.
1999-01-28 23:10:48 +00:00
ffc4811a40
Simplify slightly.
1999-01-27 18:40:36 +00:00
a49a4eabbf
Add "term" to AUTOCLOSE.
1999-01-22 22:48:24 +00:00
43278f01dc
convert(): Added parameter "autoclose", which should be a sequence of
...
general identifiers for which closing tags will be omitted
when SGML is generated. This can be used to tell the markup
generator to drop stuff like </para>. Note that it needs to
be possible for the closing tag to *always* be omitted for it
to be included in "autoclose".
main(): Added command-line option "-a" / "--autoclose" to set the
list of general identifiers passed to the convert() function
as the "autoclose" parameter. The list may only be specified
once (not additive) and GIs should be comma-separated. The
default list includes only "para".
1999-01-20 20:35:05 +00:00
0a5b8de5e2
Modified the "sgml" and "xml" targets to stop if the sub-makes fail in
...
any subdirectory; don't continue with remaining subdirs.
Added "api", "ext", "lib", "mac", "ref", and "tut" targets to only do
submakes in those directories. This is just a lot easier to use than
to cd into the subdir and use make.rules directly.
1999-01-20 17:26:56 +00:00
4259f0db04
create_module_info(): If there's a \moduleauthor, move it to an
...
<author> inside the <moduleinfo> element.
Fix problems with paragraph identification.
1999-01-19 23:09:31 +00:00
36dfe58694
isnmtoken(), istoken(): Fix to ensure the regex has to match the
...
entire attribute value.
Add ability to save list of "empty" elements to a file -- enabled by
constant in the code.
1999-01-19 23:03:04 +00:00
2664db9f76
handle_labels(): Fix problem for document fragments containing more
...
than one "root" that prevented all the <label id=...> items
from being promoted to id attributes on the enclosing chapter/
section/... properly.
1999-01-19 21:46:48 +00:00
d6ced7d199
convert(): Change the element name remapping to convert <refmodule>
...
to <module link>.
1999-01-19 17:11:23 +00:00
f82e4ab617
format_attrs(): Attempt a bit more minimization for SGML output.
1999-01-19 17:10:31 +00:00
589bc63e84
Add a "tarball" target.
1999-01-14 22:35:05 +00:00
6038f54b74
Adjust so that we are no longer using special entities for well-known
...
names. These are too much of a pain for occaissional authors.
1999-01-14 21:44:56 +00:00
3effeedad3
Shorten the name of the <rfc> "number" attribute to "num".
1999-01-14 21:18:52 +00:00
d24167baf2
Make <rfc> no longer an empty element but a container. The text
...
currently generated by the LaTeX and LaTeX2HTML processes is generated
here as well, making it more flexible in the SGML version.
Reduce the <args> element so that <optional> goes away; just use
square brackets to indicate what's optional. This makes it easier to
read than the LaTeX, and the processor can do any checking it needs to
in order to make sure it's legit. Possible shortcoming: DSSSL
processors may need more explicit markup. Can probably hack around it
for this case, but we'll see.
1999-01-14 21:18:03 +00:00
f8ebb5521d
Several new functions to re-write tables to be at least partly
...
conformant with the OASIS Exchange model. There's a little more
massage left to do, but not much.
1999-01-14 19:45:38 +00:00
a50a1df588
Added clean and clobber targets.
1999-01-14 18:26:23 +00:00
54bad44f25
Update to the latest version of Michael Ernst's script.
1999-01-14 18:17:07 +00:00
3a7a3d745d
"Driver" makefile to convert all documents to SGML or XML at once.
1999-01-14 18:13:59 +00:00
7727416686
Add usage of the "driver" Makefile.
1999-01-14 18:12:33 +00:00
9d1c3b565f
Elaborate a comment on the format of the table that drives the
...
conversion.
1999-01-14 18:10:09 +00:00
d7acf02290
Adjustments to allow elements with subelements as parameters. This is
...
used to deal with the table headings and entries.
An additional flag in the element table is used to indicate elements
which have no "general" content, but which do have subelement
content. These must be flagged distinctly from empty elements.
Currently used for \lineii, \lineiii, and \lineiv.
1999-01-14 17:38:12 +00:00
79ad1f19dc
Escape special characters on output.
1999-01-14 17:06:09 +00:00
701f10fbea
Simplify command that extracts the number of pages from a PostScript
...
file; use "grep -c" instead of "grep | wc -l | cut ... | tr ...".
1999-01-12 19:28:41 +00:00
8e2c9457a2
output_body(): For <address> elements, just skip, since they're
...
always part of the page trailer.
1999-01-11 22:30:34 +00:00
ed94dde4b9
No longer useful.
1999-01-08 15:48:47 +00:00
dd21c32169
It's finally gone!
1999-01-08 15:40:16 +00:00
c4e9263010
Add a few comments.
1999-01-08 15:32:27 +00:00
c58f346374
New support scripts for HTML->info conversion that use Michael Ernst's new
...
conversion tools.
1999-01-08 15:27:17 +00:00
3fe1d32693
New conversion tools for HTML->info from Michael Ernst
...
<mernst@cs.washington.edu>.
Thanks!
1999-01-08 15:25:29 +00:00
637ad47e61
convert(): Make sure no line has trailing whitespace. (docfixer.py
...
checks for \n\n as a paragraph separator, LaTeX allows white
space between the newlines.)
1999-01-07 18:47:07 +00:00
fcc5910090
Preliminary code to mark paragraphs. Seems to work, but very slow.
1999-01-06 22:50:52 +00:00
26f0f65653
Remove obsolete comment.
1999-01-05 20:53:43 +00:00
3b07480a17
trim_ignored_letters(): Simplify a little.
1999-01-04 22:00:56 +00:00
03a0235793
Print a line to the console reporting the number of index nodes
...
processed. This can be interesting to see.
1998-12-28 20:46:53 +00:00
aaed9710e9
create_module_info(): New function: Modify a <section> to create a
...
<moduleinfo> element based on various meta information, and
strip some cruftiness. This is more usable for information
extraction, and organizes the information more clearly.
cleanup_synopses(): Rewrite to use create_module_info(), so this
will work with multi-rooted "documents".
1998-12-10 20:25:30 +00:00
4abcffb233
Don't pass around a list of known empty elements, since the ESIS
...
contains "e" events for them. This wasn't used anyway.
1998-12-10 18:31:37 +00:00
fba0ba2a6f
Added a transform to start cleaning up the modulesynopsis stuff a
...
little; more thinking is needed about what we really want.
1998-12-10 05:07:09 +00:00
c166331cd3
Handle SGML variant as well as XML variant. SGML is *much* more
...
likely to be used.
1998-12-10 04:56:00 +00:00
86bc7b01b5
General comments on what's here and how to try it out. Note
...
dependence on the XML package.
1998-12-02 17:21:35 +00:00
3695b1212c
Support conversions to both SGML and XML; SGML is the "default".
...
Add dependency on esistools.py for the ESIS intermediate files.
1998-12-01 19:05:56 +00:00
aeea9810cd
Use esistools.
...
Lots of changes to the conversion table.
1998-12-01 19:04:12 +00:00
4db5b4636c
Use esistools.
...
Generate ESIS data instead of XML.
Misc. changes to some transforms.
1998-12-01 19:03:01 +00:00
f077b9d61f
Use esistools, getopt.
1998-12-01 19:01:53 +00:00
3843bae969
Utility functions and misc. classes used in handling ESIS data.
1998-12-01 19:00:58 +00:00
f954b6516e
Remove $(CUTCRUFT) garbage; now in fixgenents.sh.
...
Separate ESIS generation from XML generation. This will evolve a bit
more in a couple of days.
1998-11-30 22:31:45 +00:00
3d5e2c032d
Move nasty cruft from make.rules' $(CUTCRUFT) here, mostly to clean up
...
make.rules.
1998-11-30 22:30:29 +00:00
ca6d6355d7
l2hoption: Do the "right thing" to quote the right-hand-side of Perl
...
assignments. This allows '"', '$', and '@' to be included in
the values passed to parameters like --address.
1998-11-30 20:30:26 +00:00
7777e36c21
Add a -address parameter to the LaTeX2HTML command line to direct
...
documentation comments appropriately. In response to comment from
Martijn Faassen <faassen@vet.uu.nl>.
1998-11-30 20:27:31 +00:00
42f5298ab5
Several small adjustments.
1998-11-30 14:45:24 +00:00
87dfd3cfbf
Handle output of \geq and \leq.
1998-11-30 14:36:26 +00:00
4c5e533693
Do the right stuff to convert what was originally \e, \ldots, and ---
...
in the LaTeX sources.
1998-11-25 19:28:02 +00:00
d8faf85d40
Supplemental rules to convert a .tex file to a .xml file. Both XML and
...
SGML will be supported soon, probably using an ESIS representation saved
in a temp file.
1998-11-24 17:40:33 +00:00
6942e57f87
Script to convert things like <C/> and <Cpp/> to &C; and &Cpp;. This is
...
something that con't be done with the DOM as far as I can tell.
1998-11-24 17:38:49 +00:00
1cb330c383
The & character is also escaped using \.
1998-11-23 23:11:12 +00:00
1ff6db484f
Add some additional cleanup transformations.
1998-11-23 23:10:35 +00:00
5701482ea7
Fix comment regex so we don't screw up structured comments with
...
different internal indentation levels.
1998-11-23 18:21:54 +00:00
0320473a29
Script to squirrel around with the DOM tree of document fragments from the
...
LaTeX-based ESIS streams to be a little better structured, and generally
perform clean-up.
Preliminary.
1998-11-23 17:02:03 +00:00
30a68c7a2b
Moved into tools/sgmlconv/.
1998-11-23 16:59:39 +00:00
63de8f6d55
Moving to sgmlconv/ subdir.
1998-11-23 16:58:48 +00:00
bbd7509dbe
Fix up the extraction of optional parameters a little.
...
Be more informative in an exception message.
1998-11-23 16:30:18 +00:00
c16149b17b
Some cleanup.
...
Don't duplicate the information on what's empty; rely on the input
data for that. (This means that the DOM may need more work.)
1998-11-23 15:14:18 +00:00
96b07a9453
Fix some minor problems.
...
Make the table of attribute information contain only one kind of
entry. Simplifies some stuff in subconvert().
1998-11-23 15:12:00 +00:00
99ff8c4361
First cut at a script to generate SGML/XML from an ESIS event stream,
...
probably only usable for the Python docs. But also probably more
useful than latex2esis.py.
1998-11-18 23:28:24 +00:00
95f4f92b47
First cut at a script to generate ESIS events from LaTeX source,
...
probably only usable for the Python docs.
1998-11-18 23:27:24 +00:00
566b6d5b59
Support the use of bibtex. This is transparent to the user.
...
Switch from bash to ksh, in the hope that more systems support it (one
report of a site without an available bash).
1998-10-27 21:59:03 +00:00
d29cf379b9
Added --tools option, to package only the framework (no documents).
1998-10-21 14:26:26 +00:00
fbddddee49
Reflect new name of index style file.
1998-10-19 21:48:05 +00:00
9dcc9f7764
No longer needed since we have nice, contributed navigation buttons.
1998-10-19 21:40:45 +00:00
Fred Drake