distutils/command/bdist_wininst.py:
- the windows installer is again able to compile after installing
the files. Note: The default has changed, the packager has to
give --no-target-compile/--no-target-optimize to NOT compile
on the target system. (Another note: install_lib's --compile
--optimize options have the same semantics to switch off
the compilation. Shouldn't the names change?)
- All references to specific python versions are gone.
- A small bug:
raise DistutilsPlatformError ("...")
instead of
raise DistutilsPlatformError, ("...")
- When bdist_wininst creates an installer for one specific python
version, this is reflected in the name:
Distutils-0.9.2.win32-py15.exe instead of
Distutils-0.9.2.win32.exe
- bdist_wininst, when run as script, reads the wininst.exe file
and rewrites itself. Previously this was done by hand.
misc/install.c
- All the changes needed for compilation
- Deleted a lot of debug/dead code
* ensure the "dist" directory exists
* raise exception if using for modules containing compiled extensions
on a non-win32 platform.
* don't create an .ini file anymore (it was just for debugging)
fairly tight control, and the '_setup_stop_after' and '_setup_distribution'
globals to provide the tight control.
This isn't entirely reliable yet: it dies horribly with a NameError on the
example PIL setup script in examples/pil_setup.py (at least with Python
1.5.2; untested with current Python). There's some strangeness going
on with execfile(), but I don't understand it and don't have time
to track it down right now.
according to the MS docs it enables exception-handling, and (according
to Alex Martelli <aleaxit@yahoo.com>) is needed to compile without
getting warnings from standard C++ library headers. Apparently
it doesn't cause any problems with C code, so I haven't bothered
conditionalizing the use of /GX.
Changed 'core.setup()' so it sets them to reasonable defaults.
Tweaked how the "usage" string is generated: 'core' now provides
'gen_usage()', which is used instead of 'USAGE'.
Modified "build_py" and "sdist" commands to refer to
'self.distribution.script_name' rather than 'sys.argv[0]'.
The known bug (bogus error message when an empty file is
extracted) is fixed.
Other changes:
- The target-compile and target-optimize flags of bdist_wininst
are gone. It is no longer possible to compile the python
files during installation.
- The zlib module is no longer required or used by bdist_wininst.
- I moved the decompression/extraction code into a separate
file (extract.c).
- The installer stub is now compressed by UPX (see
http://upx.tsx.org/). This reduces the size of the exe
(and thus the overhead of the final installer program)
from 40 kB to 16 kB.
- The installer displays a more uptodate user wizard-like
user interface, also containing a graphic: Just's Python Powered logo.
(I could not convince myself to use one of the BeOpen logos).
- The installation progress bar now moves correctly.
* use self.debug_print() for debug messages
* uses now copy.copy() to copy lists
* added 'shared_lib_extension=".dll"', ... , this is necessary if you
want use the compiler class outside of the standard distutils build
process.
* changed result type of check_config_h() from int to string
participates in the "--root" hack, ie. it also has a new root directory
hacked on at the very last minute (essential if the .pth file is to be
included in an RPM or other smart installer!).
- added big comment describing possible problems
- look for and react to versions of gcc, ld, and dlltool; mainly
this is done by the 'get_versions()' function and the CygwinCCompiler
and Mingw32CCompiler constructors
- move 'check_config_h()' to end of file and defer calling it until
we need to (ie. in the CygwinCCompiler constructor)
- lots of changes in 'link_shared_object()' -- mostly seems to be
library and DLL stuff, but I don't follow it entirely
it so BCPPCompiler actually works, so I'm provisionally accepting it
-- ugly and working is better than not working! Major changes:
- normalize paths (apparently BC++ doesn't like slashes)
- overhauled how we search for and specify libraries on the linker
command-line
- hacked up 'find_library_file()' so it knows about "debug" library
naming convention as well as "bcpp_xxx.lib" -- the question is,
is this a well-established and sensible convention?
Also:
- change to use 'util.write_file()' to write the .def file
- 'export_symbol_file' (and corresponding 'def_file' in the old
"build info" dict) are gone; warn if we see 'def_file' in the
dict
- the MSVC "pre-link hack" is gone -- all that stuff is now handled
elsewhere (eg. by using 'export_symbols', etc.)
- add 'get_export_symbols()' and 'get_libraries()' methods -- needed
because on Windows, both of those things are a tad more complicated
than fetching them from the Extension instance
Added 'remove_duplicates()'.
Simplified constructor: no longer take 'files' or 'allfiles' as args,
and no longer have 'dir' attribute at all.
Added 'set_allfiles()' and 'findall()' so the client does have a
way to set the list of all files.
Changed 'include_pattern()' to use the 'findall()' method instead of
the external function. (Of course, the method is just a trivial
wrapper around the function.)
the filesystem, and filtering the list by applying various patterns.
Initial revision (almost) as supplied in a patch by Rene Liebscher; I
just renamed the class from Template to FileList, and the module
accordingly.
This'll work fine with 2.0 or 1.5.2, but is less than ideal for
1.6a1/a2. But the code to accomodate 1.6a1/a2 was released with
Distutils 0.9, so it can go away now.
Changed 'prune_file_list()' so it also prunes out RCS and CVS directories.
Added 'is_regex' parameter to 'select_pattern()', 'exclude_pattern()',
and 'translate_pattern()', so that you don't have to be constrained
by the simple shell-glob-like pattern language, and can escape into
full-blown regexes when needed. Currently this is only available
in code -- it's not exposed in the manifest template mini-language.
Added 'prune' option (controlled by --prune and --no-prune) to determine
whether we call 'prune_file_list()' or not -- it's true by default.
Fixed 'negative_opt' -- it was misnamed and not being seen by dist.py.
Added --no-defaults to the option table, so it's seen by FancyGetopt.
methods (but not 'link_executable()', hmmm). Currently only used by
BCPPCompiler; it's a dummy parameter for UnixCCompiler and MSVCCompiler.
Also added 'bcpp' to compiler table used by 'new_compiler()'.
Two major points:
* lots of overlap with MSVCCompiler; the common code really should be
factored out into a base class, say WindowsCCompiler
* it doesn't work: weird problem spawning the linker (see comment for
details)
to 'msvc_prelink_hack()', adding the parameters that it actually needs,
and only calling it for MSVC compiler objects. Generally gave up on the
idea of a general "hook" mechanism: deleted the empty 'precompile_hook()'.
that a particular compiler system depends on. This consists of the
'set_executables()' and 'set_executable()' methods, and a few lines in
the constructor that expect implementation classes to provide an
'executables' attribute, which we use to initialize several instance
attributes. The default implementation is somewhat biased in favour of
a Unix/DOS "command-line" view of the world, but it shouldn't be too
hard to override this for operating systems with a more sophisticated
way of representing programs-to-execute.
meant playing along with the new "dictionary of executables" scheme
added to CCompiler by adding the 'executables' class attribute, and
changing all the compile/link/etc. methods to use the new attributes
(which encapsulate both the program to run and its standard arguments,
so it was a *little* bit more than just changing some names).
Unix shell-like syntax (eg. in Python's Makefile, for one thing -- now that
I have this function, I'll probably allow quoted strings in config files too.
the "install_data" command to the installation base, which is usually just
sys.prefix. (Any setup scripts out there that specify data files will have
to set the installation directory, relative to the base, explicitly.)
in the module of the command classes that have command-specific
help options. This lets us keep the principle of lazily importing
the ccompiler module, and also gets away from defining non-methods
at class level.
major ports of GCC to Windows. Contributed by Rene Liebscher, and quite
untested by me. Apparently requires tweaking Python's installed config.h
and adding a libpython.a to build extensions.
'try_cpp()', 'search_cpp()', and 'check_header()'. This is enough that
the base config is actually useful for implementing a real config
command, specifically one for mxDateTime.
it in UnixCCompiler. Still needs to be implemented in MSVCCompiler (and
whatever other compiler classes are lurking out there, waiting to be
checked in).
'remove_tree()' can cooperate with 'mkpath()' in the maintenance of
the PATH_CREATED cache: specifically, if a directory is created
with 'mkpath()', later removed with 'remove_tree()', and 'mkpath()'
is again requested to create it, then it would erroneously think
the directory already existed, because it was in the PATH_CREATED
cache. The patch (slightly tweaked by me) fixes that.
template into a new method 'prune_file_list()', called from
'get_file_list()' rather than 'read_manifest()' -- this keeps
'read_manifest()' more general.
Deleted the redundant call to 'exclude_pattern()' in 'make_distribution()'
-- this had the same intention as 'prune_file_list()', but was incomplete
(only pruned the release tree, not the build tree) and in the wrong
place (the prune wouldn't be reflected in the manifest file).
directly printing to stdout. This was a bit more work than it sounds like
it should have been:
* turned 'select_pattern()' and 'exclude_pattern()' from functions into
methods, so they can refer to 'self' to access the method
* commented out the *other* 'exclude_pattern()' method, which appears
to be vestigial code that was never cleaned up when the
'exclude_pattern()' function was created
* changed the one use of the old 'exclude_pattern()' method to use the
new 'exclude_pattern()' (same behaviour, slightly different args)
* some code and docstring reformatting
* and, of course, changed all the debugging prints to 'debug_print()' calls
Added/tweaked some regular ('self.announce()') output for better runtime
feedback.
values that "--foo" can take for various commands: eg. what formats for
"sdist" and "bdist", what compilers for "build_ext" and "build_clib".
I have *not* reviewed this patch; I'm checking it in as-is because it also
fixes a paper-bag-over-head bug in bdist.py, and because I won't have
time to review it properly for several days: so someone else can
test it for me, instead!
Look for personal config file in /home/greg on Windows, too: users will have
to set /home/greg to use this, so it's not something that many people will
use. But if python-dev comes up with the "right way" to divine a
home directory on Windows, we can use that to set /home/greg and poof! --
personal Distutils config files on Windows.
one doesn't *do* anything by default; it's just there as a conduit for data
(eg. include dirs, libraries) from the user to the "build" commands.
However, it provides a couple of Autoconf-ish methods ('try_compile()',
'try_link()', 'try_run()') that derived, per-distribution "config" commands
can use to poke around the target system and see what's available.
Initial experimenst with mxDateTime indicate that higher-level methods are
necessary: analogs of Autoconf's AC_CHECK_HEADER, AC_CHECK_LIB will be
needed too (and that's just to probe the C/C++ system: how to probe the
Python system is wide open, and someday we'll have to worry about probing a
Java system too).
Half-fixed RPM 2 compatibility:added 'rpm_base' option, which must be set
(to eg. /usr/src/redhat on a stock Red Hat system) if rpm2_mode is on.
Still not quite working, though.
Fills in question marks in help
Reads scripts in from files rather than strings
Adds RPM 2 compatibility mode (untested). Use of this mode requires that
--bdist-base be specified because bdist_rpm has no way of detecting where
RPM wants to find spec files and source files. An unmodified RedHat 5.0
system would require '--bdist-base=/usr/src/RedHat'. (You would also have
to be root.) If the rpmrc file has been modified to allow RPMs to be built
by normal users then --build-base would need to be changed accordingly.
Formats the changelog.
GPW: tweaked formatting, added some editorial comments.
prep/build/etc. scripts, doc files, dependency info) from a config file
rather than the dedicated "package_info" file. (The idea is that
developers will provide RPM-specific info in the "[bdist_rpm]" section of
setup.cfg, but of course it could also be supplied in the other config
files, on the command line, or in the setup script -- or any mix of the
above.)
Major changes:
* added a boatload of options to 'user_options' and
'initialize_options()': 'distribution_name', 'group', 'release', ...
* added 'finalize_package_data()', which takes the place of
'_get_package_data()' -- except it's called from 'finalize_options()',
not 'run()', so we have everything figured out before we actually run
the command
* added 'ensure_string()', 'ensure_string_list()', 'ensure_filename()';
these take the place of '_check_string()' and friends. (These actually
look like really useful type-checking methods that could come in handy
all over the Distutils; should consider moving them up to Command and
using them in other command classes' 'finalize_options()' method for
error-checking).
* various cleanup, commentary, and adaptation to the new way of
storing RPM info in '_make_spec_file()'
* added "--bdist-base" option to parameterize where we build
the RPM (comes from "bdist" by default: "build/bdist.<plat>")
* simplified/cleaned up some code in 'run()' in the process of
removing (most) hard-coded directory names
* if "--spec-only", drop spec file in "dist" rather than "redhat"
(directory name still hard-coded, though)
* use 'reinitialize_command()' to fetch the "sdist" object to
tweak before running "sdist" command
* use 'self.copy_file()' method rather than 'copy_file()' function
* cosmetic tweaks to comments, error messages
* help strings start with lowercase
* added affirmative version of '--no-clean' and '--no-rpm-opt-flags',
which are the default (thus the attributes that correspond to
the options are now 'clean' and 'use_rpm_opt_flags')
setup script) to be a list of Extension instances, rather than a list of of
(ext_name, build_info) tuples. This is mostly a simplification, but
'check_extension_list()' got a lot more complicated because of the need to
convert the old-style tuples to Extension instances.
Temporarily dropped support for defining/undefining macros in the
'extensions' list -- I want to change the interface, but haven't yet made
the required changes in CCompiler and friends to support this nicely.
Also neatened up the code that merges 'extra_compile_flags' and the CFLAGS
environment variable.
Added 'reinitialize_command()' -- lets us "push" option values in
a controlled, safe way; this is a small change to the code, but
a big change to the Distutils philosophy of passing option values
around. The preferred mode is still definitely to "pull" options
from another command (eg. "install" fetches the base build directory
from "build"), but it is now feasible to "push" options onto another
command, when you know what's best for it. One possible application
will be a "config" command, which pokes around the system and pushes
values (eg. include and library directories) onto the "build" command.
Added 'dump_option_dicts()' method (for debugging output).
* Command method 'find_peer()' -> 'get_finalized_command()'
* Command method 'run_peer()' -> 'run_command()'
Also deleted the 'get_command_option()' method from Command, and
fixed the one place where it was used (in "bdist_dumb").
directories after all is said and done, so we don't accidentally include
those files in the source distribution.
(This is the quick and easy way to fix this; Andrew says: "Changing
findall() looked like it was going to be messy, so I tried this instead.
The only problem is that redundant directory traversals are being done,
walking through build/ only to throw out all the files found at the end.").
Thomas Heller
Greg Ward
Andrew M. Kuchling
Jeremy Hylton