* Add _Py_GetLocaleconvNumeric() function: decode decimal_point and
thousands_sep fields of localeconv() from the LC_NUMERIC encoding,
rather than decoding from the LC_CTYPE encoding.
* Modify locale.localeconv() and "n" formatter of str.format() (for
int, float and complex to use _Py_GetLocaleconvNumeric()
internally.
Modify locale.localeconv(), time.tzname, os.strerror() and other
functions to ignore the UTF-8 Mode: always use the current locale
encoding.
Changes:
* Add _Py_DecodeLocaleEx() and _Py_EncodeLocaleEx(). On decoding or
encoding error, they return the position of the error and an error
message which are used to raise Unicode errors in
PyUnicode_DecodeLocale() and PyUnicode_EncodeLocale().
* Replace _Py_DecodeCurrentLocale() with _Py_DecodeLocaleEx().
* PyUnicode_DecodeLocale() now uses _Py_DecodeLocaleEx() for all
cases, especially for the strict error handler.
* Add _Py_DecodeUTF8Ex(): return more information on decoding error
and supports the strict error handler.
* Rename _Py_EncodeUTF8_surrogateescape() to _Py_EncodeUTF8Ex().
* Replace _Py_EncodeCurrentLocale() with _Py_EncodeLocaleEx().
* Ignore the UTF-8 mode to encode/decode localeconv(), strerror()
and time zone name.
* Remove PyUnicode_DecodeLocale(), PyUnicode_DecodeLocaleAndSize()
and PyUnicode_EncodeLocale() now ignore the UTF-8 mode: always use
the "current" locale.
* Remove _PyUnicode_DecodeCurrentLocale(),
_PyUnicode_DecodeCurrentLocaleAndSize() and
_PyUnicode_EncodeCurrentLocale().
PyMemoryView_FromMemory() created a memoryview referring to
the internal data of the string. When the string is destroyed
the memoryview become referring to a freed memory.
when serialize into memory buffer with C pickle implementations.
This optimization already is performed when serialize into memory
with Python pickle implementations or into a file with both
implementations.
Add new fuctions ignoring the UTF-8 mode:
* _Py_DecodeCurrentLocale()
* _Py_EncodeCurrentLocale()
* _PyUnicode_DecodeCurrentLocaleAndSize()
* _PyUnicode_EncodeCurrentLocale()
Modify the readline module to use these functions.
Re-enable test_readline.test_nonascii().
The picklers do no longer allocate temporary memory when dumping large
bytes and str objects into a file object. Instead the data is
directly streamed into the underlying file object.
Previously the C implementation would buffer all content and issue a
single call to file.write() at the end of the dump. With protocol 4
this behavior has changed to issue one call to file.write() per frame.
The Python pickler with protocol 4 now dumps each frame content as a
memoryview to an IOBytes instance that is never reused and the
memoryview is no longer released after the call to write. This makes it
possible for the file object to delay access to the memoryview of
previous frames without forcing any additional memory copy as was
already possible with the C pickler.
This module has never been enabled by default, never worked correctly
on x86-64, and caused ABI problems that caused C extension
compatibility. See bpo-29137 for details/discussion.
Starting with AIX6.1 there is support in libc.a for uuid (RFC4122)
This patch provides the changes needed for this integration with the OS.
On AIX the base function is uuid_create() rather than uuid_generate_time()
The AIX uuid_t typedef is more aligned to the UUID field based definition
while the Linux typedef that is more aligned with UUID bytes
(or perhaps UUID bytes_le) definitions.
Add a new _Py_FindEnvConfigValue() function: code shared between
Windows and Unix implementations of _PyPathConfig_Calculate() to read
the pyenv.cfg file.
_Py_FindEnvConfigValue() now uses _Py_DecodeUTF8_surrogateescape()
instead of using a Python Unicode string, the Python API must not be
used early during Python initialization. Same change in Unix
search_for_exec_prefix(): use _Py_DecodeUTF8_surrogateescape().
Cleanup also encode_current_locale(): PyMem_RawFree/PyMem_Free can be
called with NULL.
Fix also "NUL byte" => "NULL byte" typo.
Replace Py_EncodeLocale() with _Py_EncodeLocaleRaw() in:
* _Py_wfopen()
* _Py_wreadlink()
* _Py_wrealpath()
* _Py_wstat()
* pymain_open_filename()
These functions are called early during Python intialization, only
the RAW memory allocator must be used.
* _Py_InitializeCore() doesn't call _PyMem_SetupAllocators() anymore
if the PYTHONMALLOC environment variable is not set.
* pymain_cmdline() now sets the allocator to the default, instead of
setting the allocator in subfunctions.
* Py_SetStandardStreamEncoding() now calls
_PyMem_SetDefaultAllocator() to get a known allocator, to be able
to release the memory with the same allocator.
2017-12-20 23:41:38 +01:00
Srinivas Reddy Thatiparthy (శ్రీనివాస్ రెడ్డి తాటిపర్తి)
* Add _PyCoreConfig.install_signal_handlers
* Remove _PyMain.config: _PyMainInterpreterConfig usage is now
restricted to pymain_init_python_main().
* Rename _PyMain.core_config to _PyMain.config
* _PyMainInterpreterConfig_Read() now creates the xoptions dictionary
from the core config
* Fix _PyMainInterpreterConfig_Read(): don't replace xoptions and
argv if they are already set.
Merge _PyCoreConfig_ReadEnv() into _PyCoreConfig_Read(), and
_Py_CommandLineDetails usage is now restricted to pymain_cmdline().
Changes:
* _PyCoreConfig: Add nxoption, xoptions, nwarnoption and warnoptions
* Add _PyCoreConfig.program: argv[0] or ""
* Move filename, command, module and xoptions from
_Py_CommandLineDetails to _PyMain. xoptions _Py_OptList becomes
(int, wchar_t**) list.
* Add pymain_cmdline() function
* Rename copy_argv() to copy_wstrlist(). Rename clear_argv() to
clear_wstrlist(). Remove _Py_OptList structure: use (int,
wchar_t**) list instead.
* Rename pymain_set_flag_from_env() to pymain_get_env_flag()
* Rename pymain_set_flags_from_env() to pymain_get_env_flags()
* _PyMainInterpreterConfig_Read() now creates the warnoptions from
_PyCoreConfig.warnoptions
* Inline pymain_add_warning_dev_mode() and
pymain_add_warning_bytes_flag() into config_init_warnoptions()
* Inline pymain_get_program_name() into _PyCoreConfig_Read()
* _Py_CommandLineDetails: Replace warning_options with nwarnoption
and warnoptions. Replace env_warning_options with nenv_warnoption
and env_warnoptions.
* pymain_warnings_envvar() now has a single implementation for
Windows and Unix: use config_get_env_var_dup() to also get the
variable as wchar_t* on Unix.
* Reorganize pymain_main() to make the code more flat
* Clear configurations before pymain_update_sys_path()
* Mark Py_FatalError() and _Py_FatalInitError() with _Py_NO_RETURN
* Replace _PyMain.run_code variable with a new RUN_CODE() macro
* Move _PyMain.cf into a local variable in pymain_run_python()
* Add argc and argv to _PyCoreConfig
* _PyMainInterpreterConfig_Read() now builds its argv from
_PyCoreConfig.arg
* Move _PyMain.env_warning_options into _Py_CommandLineDetails
* Reorder pymain_free()
Fix compiler warnings in Py_FinalizeEx(): only define variables if
they are needed, add #ifdef.
Other cleanup changes:
* _PyWarnings_InitWithConfig() is no more needed: call
_PyWarnings_Init() instead.
* Inline pymain_init_main_interpreter() in its caller. This
subfunction is no more justifed.
Even though Python marks any handles it opens as non-inheritable there
is still a race when using `subprocess.Popen` since creating a process
with redirected stdio requires temporarily creating inheritable handles.
By implementing support for `subprocess.Popen(close_fds=True)` we fix
this race.
In order to implement this we use PROC_THREAD_ATTRIBUTE_HANDLE_LIST
which is available since Windows Vista. Which allows to pass an explicit
list of handles to inherit when creating a process.
This commit also adds `STARTUPINFO.lpAttributeList["handle_list"]`
which can be used to control PROC_THREAD_ATTRIBUTE_HANDLE_LIST
directly.
bpo-29240, bpo-32030: If the encoding change (C locale coerced or
UTF-8 Mode changed), Py_Main() now reads again the configuration with
the new encoding.
Changes:
* Add _Py_UnixMain() called by main().
* Rename pymain_free_pymain() to pymain_clear_pymain(), it can now be
called multipled times.
* Rename pymain_parse_cmdline_envvars() to pymain_read_conf().
* Py_Main() now clears orig_argc and orig_argv at exit.
* Remove argv_copy2, Py_Main() doesn't modify argv anymore. There is
no need anymore to get two copies of the wchar_t** argv.
* _PyCoreConfig: add coerce_c_locale and coerce_c_locale_warn.
* Py_UTF8Mode is now initialized to -1.
* Locale coercion (PEP 538) now respects -I and -E options.
Each interpreter now has its core_config and main_config copy:
* Add _PyCoreConfig_Copy() and _PyMainInterpreterConfig_Copy()
* Move _PyCoreConfig_Read(), _PyCoreConfig_Clear() and
_PyMainInterpreterConfig_Clear() from Python/pylifecycle.c to
Modules/main.c
* Fix _Py_InitializeEx_Private(): call _PyCoreConfig_ReadEnv() before
_Py_InitializeCore()
bpo-32329, bpo-32030:
* The -R option now turns on hash randomization when the
PYTHONHASHSEED environment variable is set to 0 Previously, the
option was ignored.
* sys.flags.hash_randomization is now properly set to 0 when hash
randomization is turned off by PYTHONHASHSEED=0.
* _PyCoreConfig_ReadEnv() now reads the PYTHONHASHSEED environment
variable. _Py_HashRandomization_Init() now only apply the
configuration, it doesn't read PYTHONHASHSEED anymore.
* Fix multiple typos in code comments
* Add spacing in comments (test_logging.py, test_math.py)
* Fix spaces at the beginning of comments in test_logging.py
_PyMainInterpreterConfig now contains Python objects, whereas
_PyCoreConfig contains wchar_t* strings.
Core config:
* Rename _PyMainInterpreterConfig_ReadEnv() to _PyCoreConfig_ReadEnv()
* Move 3 strings from _PyMainInterpreterConfig to _PyCoreConfig:
module_search_path_env, home, program_name.
* Add _PyCoreConfig_Clear()
* _PyPathConfig_Calculate() now takes core config rather than main
config
* _PyMainInterpreterConfig_Read() now requires also a core config
Main config:
* Add _PyMainInterpreterConfig.module_search_path: sys.path list
* Add _PyMainInterpreterConfig.argv: sys.argv list
* _PyMainInterpreterConfig_Read() now computes module_search_path
Changes:
* Split _PySys_SetArgvWithError() into subfunctions for Py_Main():
* Create the Python list object
* Set sys.argv to the list
* Compute argv0
* Prepend argv0 to sys.path
* Add _PyPathConfig_ComputeArgv0()
* Remove _PySys_SetArgvWithError()
* Py_Main() now splits the code to compute sys.argv/path0 and the
code to update the sys module: add pymain_compute_argv()
subfunction.
asyncio.get_event_loop(), and, subsequently asyncio._get_running_loop()
are one of the most frequently executed functions in asyncio. They also
can't be sped up by third-party event loops like uvloop.
When implemented in C they become 4x faster.
bpo-29240, bpo-32030:
* Rename pymain_set_argv() to pymain_set_sys_argv()
* pymain_set_sys_argv() now creates of copy of argv and modify the
copy, rather than modifying pymain->argv
* Call pymain_set_sys_argv() earlier: before pymain_run_python(), but
after pymain_get_importer().
* Add _PySys_SetArgvWithError() to handle errors
* Add -X utf8 command line option, PYTHONUTF8 environment variable
and a new sys.flags.utf8_mode flag.
* If the LC_CTYPE locale is "C" at startup: enable automatically the
UTF-8 mode.
* Add _winapi.GetACP(). encodings._alias_mbcs() now calls
_winapi.GetACP() to get the ANSI code page
* locale.getpreferredencoding() now returns 'UTF-8' in the UTF-8
mode. As a side effect, open() now uses the UTF-8 encoding by
default in this mode.
* Py_DecodeLocale() and Py_EncodeLocale() now use the UTF-8 encoding
in the UTF-8 Mode.
* Update subprocess._args_from_interpreter_flags() to handle -X utf8
* Skip some tests relying on the current locale if the UTF-8 mode is
enabled.
* Add test_utf8mode.py.
* _Py_DecodeUTF8_surrogateescape() gets a new optional parameter to
return also the length (number of wide characters).
* pymain_get_global_config() and pymain_set_global_config() now
always copy flag values, rather than only copying if the new value
is greater than the old value.
Rather than supporting dev mode directly in the warnings module, this
instead adjusts the initialisation code to add an extra 'default'
entry to sys.warnoptions when dev mode is enabled.
This ensures that dev mode behaves *exactly* as if `-Wdefault` had
been passed on the command line, including in the way it interacts
with `sys.warnoptions`, and with other command line flags like `-bb`.
Fix also bpo-20361: have -b & -bb options take precedence over any
other warnings options.
Patch written by Nick Coghlan, with minor modifications of Victor Stinner.
Python now supports checking bytecode cache up-to-dateness with a hash of the
source contents rather than volatile source metadata. See the PEP for details.
While a fairly straightforward idea, quite a lot of code had to be modified due
to the pervasiveness of pyc implementation details in the codebase. Changes in
this commit include:
- The core changes to importlib to understand how to read, validate, and
regenerate hash-based pycs.
- Support for generating hash-based pycs in py_compile and compileall.
- Modifications to our siphash implementation to support passing a custom
key. We then expose it to importlib through _imp.
- Updates to all places in the interpreter, standard library, and tests that
manually generate or parse pyc files to grok the new format.
- Support in the interpreter command line code for long options like
--check-hash-based-pycs.
- Tests and documentation for all of the above.
PyImport_ExtendInittab() now uses PyMem_RawRealloc() rather than
PyMem_Realloc(). PyImport_ExtendInittab() can be called before
Py_Initialize() whereas only the PyMem_Raw allocator is supposed to
be used before Py_Initialize().
Add _PyImport_Fini2() to release the memory allocated by
PyImport_ExtendInittab() at exit. PyImport_ExtendInittab() now forces
the usage of the default raw allocator, to be able to release memory
in _PyImport_Fini2().
Don't export these functions anymore to be C API, only to
Py_BUILD_CORE:
* _PyExc_Fini()
* _PyImport_Fini()
* _PyGC_DumpShutdownStats()
* _PyGC_Fini()
* _PyType_Fini()
* _Py_HashRandomization_Fini()
* Py_Main() now starts by reading Py_xxx configuration variables to
only work on its own private structure, and then later writes back
the configuration into these variables.
* Replace Py_GETENV() with pymain_get_env_var() which ignores empty
variables.
* Add _PyCoreConfig.dump_refs
* Add _PyCoreConfig.malloc_stats
* _PyObject_DebugMallocStats() is now responsible to check if debug
hooks are installed. The function returns 1 if stats were written,
or 0 if the hooks are disabled. Mark _PyMem_PymallocEnabled() as
static.
* Simplify _PyCoreConfig_INIT, _PyMainInterpreterConfig_INIT,
_PyPathConfig_INIT macros: no need to set fields to 0/NULL, it's
redundant (the C language sets them to 0/NULL for us).
* Fix typo: pymain_run_statup() => pymain_run_startup()
* Remove a few XXX/TODO
_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Changes:
* _PyPathConfig_Fini() cannot be called in Py_FinalizeEx().
Py_Initialize() and Py_Finalize() can be called multiple times, but
it must not "forget" parameters set by Py_SetProgramName(),
Py_SetPath() or Py_SetPythonHome(), whereas _PyPathConfig_Fini()
clear all these parameters.
* config_get_program_name() and calculate_program_full_path() now
also decode paths using Py_DecodeLocale() to use the
surrogateescape error handler, rather than decoding using
mbstowcs() which is strict.
* Change _Py_CheckPython3() prototype: () => (void)
* Truncate a few lines which were too long
* _PyMainInterpreterConfig_ReadEnv() now sets program_name from
environment variables and pymain_parse_envvars() implements the
falls back on argv[0].
* Remove _PyMain.program_name: use the program_name from
_PyMainInterpreterConfig
* Move the Py_SetProgramName() call back to pymain_init_python(),
just before _Py_InitializeCore().
* pathconfig_global_init() now also calls
_PyMainInterpreterConfig_Read() to set program_name if it isn't set
yet
* Cleanup PyCalculatePath: pass main_config to subfunctions to get
directly fields from main_config (home, module_search_path_env and
program_name)
* Rename PyPathConfig structure to _PyPathConfig and move it to
Include/internal/pystate.h
* Rename path_config to _Py_path_config
* _PyPathConfig: Rename program_name field to program_full_path
* Add assert(str != NULL); to _PyMem_RawWcsdup(), _PyMem_RawStrdup()
and _PyMem_Strdup().
* Rename calculate_path() to pathconfig_global_init(). The function
now does nothing if it's already initiallized.
In _io_FileIO_readall_impl(), lseek() and _Py_fstat_noraise() were called
without releasing the GIL. This can cause all threads to hang for
unlimited time when calling FileIO.read() and the NFS server is not
accessible.
Fix the following false-alarm Coverity warning:
Result is not floating-point
(UNINTENDED_INTEGER_DIVISION)integer_division: Dividing integer
expressions 9223372036854775807LL and 1000LL, and then converting
the integer quotient to type double. Any remainder, or fractional
part of the quotient, is ignored.
To compute and use a non-integer quotient, change or cast either
operand to type double. If integer division is intended, consider
indicating that by casting the result to type long long .
Handle PyModule_AddIntConstant() and PyModule_AddStringConstant()
failures. Add also constants before calling setup_readline(), since
setup_readline() registers callbacks which uses a reference to the
module, whereas the module is destroyed if adding constants fails.
Fix Coverity warning:
CID 1414686: Unchecked return value (CHECKED_RETURN)
2. check_return: Calling PyModule_AddStringConstant without checking
return value (as is done elsewhere 45 out of 55 times).
* bpo-32101: Add sys.flags.dev_mode flag
Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
Mention it in the development chapiter.
* Fix _PyMem_SetupAllocators("debug"): always restore allocators to
the defaults, rather than only caling _PyMem_SetupDebugHooks().
* Add _PyMem_SetDefaultAllocator() helper to set the "default"
allocator.
* Add _PyMem_GetAllocatorsName(): get the name of the allocators
* main() now uses debug hooks on memory allocators if Py_DEBUG is
defined, rather than calling directly malloc()
* Document default memory allocators in C API documentation
* _Py_InitializeCore() now fails with a fatal user error if
PYTHONMALLOC value is an unknown memory allocator, instead of
failing with a fatal internal error.
* Add new tests on the PYTHONMALLOC environment variable
* Add support.with_pymalloc()
* Add the _testcapi.WITH_PYMALLOC constant and expose it as
support.with_pymalloc().
* sysconfig.get_config_var('WITH_PYMALLOC') doesn't work on Windows, so
replace it with support.with_pymalloc().
* pythoninfo: add _testcapi collector for pymem
* Py_Main() now calls Py_SetProgramName() earlier to be able to get
the program name in _PyMainInterpreterConfig_ReadEnv().
* Rename prog to program_name
* Rename progpath to program_name
Py_GetPath() and Py_Main() now call
_PyMainInterpreterConfig_ReadEnv() to share the same code to get
environment variables.
Changes:
* Add _PyMainInterpreterConfig_ReadEnv()
* Add _PyMainInterpreterConfig_Clear()
* Add _PyMem_RawWcsdup()
* _PyMainInterpreterConfig: rename pythonhome to home
* Rename _Py_ReadMainInterpreterConfig() to
_PyMainInterpreterConfig_Read()
* Use _Py_INIT_USER_ERR(), instead of _Py_INIT_ERR(), for decoding
errors: the user is able to fix the issue, it's not a bug in
Python. Same change was made in _Py_INIT_NO_MEMORY().
* Remove _Py_GetPythonHomeWithConfig()
* calculate_path() rewritten in Modules/getpath.c and PC/getpathp.c
* Move global variables into a new PyPathConfig structure.
* calculate_path():
* Split the huge calculate_path() function into subfunctions.
* Add PyCalculatePath structure to pass data between subfunctions.
* Document PyCalculatePath fields.
* Move cleanup code into a new calculate_free() subfunction
* calculate_init() now handles Py_DecodeLocale() failures properly
* calculate_path() is now atomic: only replace PyPathConfig
(path_config) at once on success.
* _Py_GetPythonHomeWithConfig() now returns an error on failure
* Add _Py_INIT_NO_MEMORY() helper: report a memory allocation failure
* Coding style fixes (PEP 7)
* Py_Main() now reads the PYTHONHOME environment variable
* Add _Py_GetPythonHomeWithConfig() private function
* Add _PyWarnings_InitWithConfig()
* init_filters() doesn't get the current core configuration from the
current interpreter or Python thread anymore. Pass explicitly the
configuration to _PyWarnings_InitWithConfig().
* _Py_InitializeCore() now fails on _PyWarnings_InitWithConfig()
failure.
* Pass configuration as constant
Changes:
* Py_Main() initializes _PyCoreConfig.module_search_path_env from
the PYTHONPATH environment variable.
* PyInterpreterState_New() now initializes core_config and config
fields
* Compute sys.path a little bit ealier in
_Py_InitializeMainInterpreter() and new_interpreter()
* Add _Py_GetPathWithConfig() private function.
Py_Main() now handles two more -X options:
* -X showrefcount: new _PyCoreConfig.show_ref_count field
* -X showalloccount: new _PyCoreConfig.show_alloc_count field
The developer mode (-X dev) now creates all default warnings filters
to order filters in the correct order to always show ResourceWarning
and make BytesWarning depend on the -b option.
Write a functional test to make sure that ResourceWarning is logged
twice at the same location in the developer mode.
Add a new 'dev_mode' field to _PyCoreConfig.
Add a new "developer mode": new "-X dev" command line option to
enable debug checks at runtime.
Changes:
* Add unit tests for -X dev
* test_cmd_line: replace test.support with support.
* Fix _PyRuntimeState_Fini(): Use the same memory allocator
than _PyRuntimeState_Init().
* Fix _PyMem_GetDefaultRawAllocator()
Parse more env vars in Py_Main():
* Add more options to _PyCoreConfig:
* faulthandler
* tracemalloc
* importtime
* Move code to parse environment variables from _Py_InitializeCore()
to Py_Main(). This change fixes a regression from Python 3.6:
PYTHONUNBUFFERED is now read before calling pymain_init_stdio().
* _PyFaulthandler_Init() and _PyTraceMalloc_Init() now take an
argument to decide if the module has to be enabled at startup.
* tracemalloc_start() is now responsible to check the maximum number
of frames.
Other changes:
* Cleanup Py_Main():
* Rename some pymain_xxx() subfunctions
* Add pymain_run_python() subfunction
* Cleanup Py_NewInterpreter()
* _PyInterpreterState_Enable() now reports failure
* init_hash_secret() now considers pyurandom() failure as an "user
error": don't fail with abort().
* pymain_optlist_append() and pymain_strdup() now sets err on memory
allocation failure.
* Don't use "Python runtime" anymore to parse command line options or
to get environment variables: pymain_init() is now a strict
separation.
* Use an error message rather than "crashing" directly with
Py_FatalError(). Limit the number of calls to Py_FatalError(). It
prepares the code to handle errors more nicely later.
* Warnings options (-W, PYTHONWARNINGS) and "XOptions" (-X) are now
only added to the sys module once Python core is properly
initialized.
* _PyMain is now the well identified owner of some important strings
like: warnings options, XOptions, and the "program name". The
program name string is now properly freed at exit.
pymain_free() is now responsible to free the "command" string.
* Rename most methods in Modules/main.c to use a "pymain_" prefix to
avoid conflits and ease debug.
* Replace _Py_CommandLineDetails_INIT with memset(0)
* Reorder a lot of code to fix the initialization ordering. For
example, initializing standard streams now comes before parsing
PYTHONWARNINGS.
* Py_Main() now handles errors when adding warnings options and
XOptions.
* Add _PyMem_GetDefaultRawAllocator() private function.
* Cleanup _PyMem_Initialize(): remove useless global constants: move
them into _PyMem_Initialize().
* Call _PyRuntime_Initialize() as soon as possible:
_PyRuntime_Initialize() now returns an error message on failure.
* Add _PyInitError structure and following macros:
* _Py_INIT_OK()
* _Py_INIT_ERR(msg)
* _Py_INIT_USER_ERR(msg): "user" error, don't abort() in that case
* _Py_INIT_FAILED(err)
* Fix compilation of the socket module on NetBSD 8.
* Fix the assertion failure or reading arbitrary data when parse
a AF_BLUETOOTH address on NetBSD and DragonFly BSD.
* Fix other potential errors and make the code more reliable.
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.
Same change for MB and GB which become MiB and GiB.
Change the output of Tools/iobench/iobench.py.
Round also the size of the documentation from 5.5 MB to 5 MiB.
All Blake2 params have to be encoded in little-endian byte order. For
the two multi-byte integer params, leaf_length and node_offset, that
means that assigning a native-endian integer to them appears to work on
little-endian platforms, but gives the wrong result on big-endian. The
current libb2 API doesn't make that very clear, and @sneves is working
on new API functions in the GH issue above. In the meantime, we can work
around the problem by explicitly assigning little-endian values to the
parameter block.
See https://github.com/BLAKE2/libb2/issues/12.
When a single .c file contains several functions and/or methods with
the same name, a safety _METHODDEF #define statement is generated
only for one of them.
This fixes the bug by using the full name of the function to avoid
duplicates rather than just the name.
Add new time functions:
* time.clock_gettime_ns()
* time.clock_settime_ns()
* time.monotonic_ns()
* time.perf_counter_ns()
* time.process_time_ns()
* time.time_ns()
Add new _PyTime functions:
* _PyTime_FromTimespec()
* _PyTime_FromNanosecondsObject()
* _PyTime_FromTimeval()
Other changes:
* Add also os.times() tests to test_os.
* pytime_fromtimeval() and pytime_fromtimeval() now return
_PyTime_MAX or _PyTime_MIN on overflow, rather than undefined
behaviour
* _PyTime_FromNanoseconds() parameter type changes from long long to
_PyTime_t
Replace occurence of nested comments in blake2 reference implementation
with preprocessor directive for disabling unused code.
`blake2s-load-xop.h` is conditionally pulled in only on chips with XOP
support, among others the AMD Bulldozer. The malformed comments in the
source file breaks the build of `hashlib`'s `_blake2` on GCC 6.3.0.
Official reference code on github uses `#if` so this change should be
uncontroversial.
Modify the code to use ncurses is_pad() instead of checking WINDOW
_flags field. If your platform does not provide the is_pad(), the
existing way that checks the field will be enabled.
Note: This change does not drop support for platforms where do not
have both WINDOW _flags field and is_pad().
Cleanup pymalloc:
* Rename _PyObject_Alloc() to pymalloc_alloc()
* Rename _PyObject_FreeImpl() to pymalloc_free()
* Rename _PyObject_Realloc() to pymalloc_realloc()
* pymalloc_alloc() and pymalloc_realloc() don't fallback on the raw
allocator anymore, it now must be done by the caller
* Add "success" and "failed" labels to pymalloc_alloc() and
pymalloc_free()
* pymalloc_alloc() and pymalloc_free() don't update
num_allocated_blocks anymore: it should be done in the caller
* _PyObject_Calloc() is now responsible to fill the memory block
allocated by pymalloc with zeros
* Simplify pymalloc_alloc() prototype
* _PyObject_Realloc() now calls _PyObject_Malloc() rather than
calling directly pymalloc_alloc()
_PyMem_DebugRawAlloc() and _PyMem_DebugRawRealloc():
* document the layout of a memory block
* don't increase the serial number if the allocation failed
* check for integer overflow before computing the total size
* add a 'data' variable to make the code easiler to follow
test_setallocators() of _testcapimodule.c now test also the context.
Use the _PyTime_t type rather than double for the faulthandler
timeout in dump_traceback_later().
This change should fix the following Coverity warning:
CID 1420311: Incorrect expression (UNINTENDED_INTEGER_DIVISION)
Dividing integer expressions "9223372036854775807LL" and "1000LL",
and then converting the integer quotient to type "double". Any
remainder, or fractional part of the quotient, is ignored.
if ((timeout * 1e6) >= (double) PY_TIMEOUT_MAX) {
The warning comes from (double)PY_TIMEOUT_MAX with:
#define PY_TIMEOUT_MAX (PY_LLONG_MAX / 1000)
The startup refactoring means command line settings
are now applied after settings are read from the
environment.
This updates the way command line settings are applied
to account for that, ensures more settings are first read
from the environment in _PyInitializeCore, and adds a
simple test case covering the flags that are easy to check.
Fix the pthread+semaphore implementation of
PyThread_acquire_lock_timed() when called with timeout > 0 and
intr_flag=0: recompute the timeout if sem_timedwait() is interrupted
by a signal (EINTR).
See also the PEP 475.
The pthread implementation of PyThread_acquire_lock() now fails with
a fatal error if the timeout is larger than PY_TIMEOUT_MAX, as done
in the Windows implementation.
The check prevents any risk of overflow in PyThread_acquire_lock().
Add also PY_DWORD_MAX constant.
Rework the code choosing BLAKE2 code paths from using the optimized
variant on all x86_64 machines to using it when SSSE3 or better
supported instructions sets are available.
Firstly, this solves the problem of using pure SSE2 code path on x86_64
machines. As reported in the bug, this code is slower than the reference
code on all tested x86_64 machines. Furthermore, on Athlon64 that lacks
SSSE3, it is even 2.5 times slower than the reference code! Checking
for SSSE3 therefore ensures that the optimized implementation will only
be used when it has a chance of performing better.
Secondly, this makes it possible to use SSSE3+ optimizations on 32-bit
x86 systems. This allows for even 2 times speed gain on modern 32-bit
x86 systems (tested in a 32-bit chroot).
Fix the following Coverity warning:
>>> CID 1420038: Control flow issues (DEADCODE)
>>> Execution cannot reach this statement: "res = sem_trywait(self->han...".
321 res = sem_trywait(self->handle);
The deadcode was introduced by the commit
c872d39d32.
Victor Stinner
Serhiy Storchaka
David Carlier
Max Bélanger
Olivier Grisel
Nathaniel J. Smith
Michael Felt
Benjamin Peterson
Andrew Svetlov
Yury Selivanov
INADA Naoki
Paul Ganssle
Srinivas Reddy Thatiparthy (శ్రీనివాస్ రెడ్డి తాటిపర్తి)
Marcel Plch
Zackery Spytz
Segev Finer
Giuseppe Scrivano
Anthony Sottile
Mike
Antoine Pitrou
Licht Takeuchi
Nir Soffer
gauravbackback
Mat M
xdegaye
benfogle
Berker Peksag
James
Justus Schwabedal
Anders Lorentsen
Oren Milman
luzpaz
Jack O'Connor
Tal Einat
stratakis
Lars Viklund
Masayuki Yamamoto
Erik Bray
Nick Coghlan
Michał Górny