* Fix AttributeError (not all SSL exceptions have 'errno' attribute)
* Increase default handshake timeout from 10 to 60 seconds
* Make sure start_tls can be cancelled correctly
* Make sure any error in SSLProtocol gets propagated (instead of just being logged)
Currently, asyncio.wait_for(fut), upon reaching the timeout deadline,
cancels the future and returns immediately. This is problematic for
when *fut* is a Task, because it will be left running for an arbitrary
amount of time. This behavior is iself surprising and may lead to
related bugs such as the one described in bpo-33638:
condition = asyncio.Condition()
async with condition:
await asyncio.wait_for(condition.wait(), timeout=0.5)
Currently, instead of raising a TimeoutError, the above code will fail
with `RuntimeError: cannot wait on un-acquired lock`, because
`__aexit__` is reached _before_ `condition.wait()` finishes its
cancellation and re-acquires the condition lock.
To resolve this, make `wait_for` await for the task cancellation.
The tradeoff here is that the `timeout` promise may be broken if the
task decides to handle its cancellation in a slow way. This represents
a behavior change and should probably not be back-patched to 3.6 and
earlier.
Use transport.set_write_buffer_limits() in sendfile tests of
test_asyncio to make sure that the protocol is paused after sending
4 KiB. Previously,
test_sendfile_fallback_close_peer_in_the_middle_of_receiving() failed
on FreeBSD if the DATA was smaller than the default limit of 64 KiB.
In this commit:
* Support BufferedProtocol in set_protocol() and start_tls()
* Fix proactor to cancel readers reliably
* Update tests to be compatible with OpenSSL 1.1.1
* Clarify BufferedProtocol docs
* Bump TLS tests timeouts to 60 seconds; eliminate possible race from start_serving
* Rewrite test_start_tls_server_1
bpo-32622, bpo-33353: On macOS, sock.connect() changes the
SO_SNDBUF value. Only set SO_SNDBUF and SO_RCVBUF buffer sizes
once a socket is connected or binded, not before.
bpo-32622, bpo-33353: sendfile() tests of test_asyncio use socket
buffers of 1 kB "to test on relative small data sets". Send only
160 KiB rather 10 MB to make the test much faster.
Shrink also SendfileBase.DATA from 1600 KiB to 160 KiB.
On Linux, 3 test_sock_sendfile_mix_with_regular_send() runs now take
less than 1 second, instead of 18 seconds.
On FreeBSD, the 3 tests didn't hang, but took 3 minutes. Now
the 3 tests pass in less than 1 seconds.
TLS 1.3 behaves slightly different than TLS 1.2. Session tickets and TLS
client cert auth are now handled after the initialy handshake. Tests now
either send/recv data to trigger session and client certs. Or tests
ignore ConnectionResetError / BrokenPipeError on the server side to
handle clients that force-close the socket fd.
To test TLS 1.3, OpenSSL 1.1.1-pre7-dev (git master + OpenSSL PR
https://github.com/openssl/openssl/pull/6340) is required.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-33263 Fix FD leak in _SelectorSocketTransport. (GH-6450)
Under particular circumstances _SelectorSocketTransport can try to add a reader
even the transport is already being closed. This can lead to FD leak and
invalid stated of the following connections. Fixed the SelectorSocketTransport
to add the reader only if the trasport is still active.
Fix typo from commit 6370f345e1
Signed-off-by: Christian Heimes <christian@python.org>
<!--
Thanks for your contribution!
Please read this comment in its entirety. It's quite important.
# Pull Request title
It should be in the following format:
```
bpo-NNNN: Summary of the changes made
```
Where: bpo-NNNN refers to the issue number in the https://bugs.python.org.
Most PRs will require an issue number. Trivial changes, like fixing a typo, do not need an issue.
# Backport Pull Request title
If this is a backport PR (PR made against branches other than `master`),
please ensure that the PR title is in the following format:
```
[X.Y] <title from the original PR> (GH-NNNN)
```
Where: [X.Y] is the branch name, e.g. [3.6].
GH-NNNN refers to the PR number from `master`.
-->
<!-- issue-number: bpo-32262 -->
https://bugs.python.org/issue32262
<!-- /issue-number -->
The proactor event loop has a race condition when reading with
pausing/resuming. `resume_reading()` unconditionally schedules the read
function to read from the current future. If `resume_reading()` was
called before the previously scheduled done callback fires, this results
in two attempts to get the data from the most recent read and an
assertion failure. This commit tracks whether or not `resume_reading`
needs to reschedule the callback to restart the loop, preventing a
second attempt to read the data.
test_asyncio hangs indefinitely on macOS 10.13.2+ on `read_pty_output()`
using the KqueueSelector. Closing `proto.transport` (as is done in
`write_pty_output()`) seems to fix it.
(cherry picked from commit 12f74d8608)
Co-authored-by: Nathan Henrie <n8henrie@users.noreply.github.com>
Also, re-enable test_read_pty_output on macOS.
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
To mitigate the situation when the buildbot is under load
and is unable to send/receive data fast enough:
* reduce the size of the payload
* set a generous timeout for socket ops
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32662: Implement Server.start_serving() and Server.serve_forever()
New methods:
* Server.start_serving(),
* Server.serve_forever(), and
* Server.is_serving().
Add 'start_serving' keyword parameter to loop.create_server() and
loop.create_unix_server().
Specifically, it's not possible to subclass Task/Future classes
and override the following methods:
* Future._schedule_callbacks
* Task._step
* Task._wakeup
* Add coro.cr_origin and sys.set_coroutine_origin_tracking_depth
* Use coroutine origin information in the unawaited coroutine warning
* Stop using set_coroutine_wrapper in asyncio debug mode
* In BaseEventLoop.set_debug, enable debugging in the correct thread
Add test certs and test for ECDSA cert and EC/RSA dual mode.
I'm also adding certs for IDNA 2003/2008 tests and simplify some test
data handling.
Signed-off-by: Christian Heimes <christian@python.org>
* Make ssh_handshake_timeout None by default.
* Raise ValueError if ssl_handshake_timeout is used without ssl.
* Raise ValueError if ssl_handshake_timeout is not positive.
asyncio.get_event_loop(), and, subsequently asyncio._get_running_loop()
are one of the most frequently executed functions in asyncio. They also
can't be sped up by third-party event loops like uvloop.
When implemented in C they become 4x faster.
* Convert asyncio/tasks.py to async/await
* Convert asyncio/queues.py to async/await
* Convert asyncio/test_utils.py to async/await
* Convert asyncio/base_subprocess.py to async/await
* Convert asyncio/subprocess.py to async/await
* Convert asyncio/streams.py to async/await
* Fix comments
* Convert asyncio/locks.py to async/await
* Convert asyncio.sleep to async def
* Add a comment
* Add missing news
* Convert stubs from AbstrctEventLoop to async functions
* Convert subprocess_shell/subprocess_exec
* Convert connect_read_pipe/connect_write_pip to async/await syntax
* Convert create_datagram_endpoint
* Convert create_unix_server/create_unix_connection
* Get rid of old style coroutines in unix_events.py
* Convert selector_events.py to async/await
* Convert wait_closed and create_connection
* Drop redundant line
* Convert base_events.py
* Code cleanup
* Drop redundant comments
* Fix indentation
* Add explicit tests for compatibility between old and new coroutines
* Convert windows event loop to use async/await
* Fix double awaiting of async function
* Convert asyncio/locks.py
* Improve docstring
* Convert tests to async/await
* Convert more tests
* Convert more tests
* Convert more tests
* Convert tests
* Improve test
* Remove asyncio.selectors and asyncio._overlapped symbols from the
namespace of the asyncio module
* Replace "from asyncio import selectors" with "import selectors"
* Replace "from asyncio import _overlapped" with "import _overlapped"
asyncio.selectors was added to support Python 3.3, which doesn't have
selectors in its standard library, and Python 3.4 in the same code
base. Same rationale for asyncio._overlapped. Python 3.3 reached its
end of life, and asyncio is no more maintained as a third party
module on PyPI.
The test.support.skip_unless_bind_unix_socket() decorator is used to skip
asyncio tests that fail because the platform lacks a functional bind()
function for unix domain sockets (as it is the case for non root users on the
recent Android versions that run now SELinux in enforcing mode).
Call doCleanups() to close the loop after calling
executor.shutdown(wait=True): see TestCase.set_event_loop() of
asyncio.test_utils.
Replace also gc.collect() with support.gc_collect().
* Explicitly call shutdown(wait=True) on executors to wait until all
threads complete to prevent side effects between tests.
* Fix test_loop_self_reading_exception(): don't mock loop.close().
Previously, the original close() method was called rather than the
mock, because how set_event_loop() registered loop.close().
* bpo-31034: Reliable signal handler for test_asyncio
Don't rely on the current SIGHUP signal handler, make sure that it's
set to the "default" signal handler: SIG_DFL.
* Add comments
* bpo-30280: asyncio now cleans up threads
asyncio base TestCase now uses threading_setup() and
threading_cleanup() of test.support to cleanup threads.
* asyncio: Fix TestBaseSelectorEventLoop cleanup
bpo-30280: TestBaseSelectorEventLoop of
test.test_asyncio.test_selector_events now correctly closes the event
loop: cleanup its executor to not leak threads.
Don't override the close() method of the event loop, only override
the_close_self_pipe() method.
when there are no more `await` or `yield (from)` before return in coroutine,
cancel was ignored.
example:
async def coro():
asyncio.Task.current_task().cancel()
return 42
...
res = await coro() # should raise CancelledError
Victor Stinner
Yury Selivanov
Brett Cannon
Elvis Pranskevichus
twisteroid ambassador
Christian Heimes
Andrew Svetlov
Vlad Starostin
CtrlZvi
Steve Dower
Antoine Pitrou
Ned Deily
Bar Harel
Oren Milman
José Melero Fernández
Victor Stinner
Nathaniel J. Smith
Srinivas Reddy Thatiparthy (శ్రీనివాస్ రెడ్డి తాటిపర్తి)
Neil Aspinall
Julien Duponchelle
xdegaye
Andrey Egorov
Suren Nihalani
Marat Sharafutdinov
jimmylai
Quentin Dawans
jlacoline
Jelle Zijlstra
Victor K
Serhiy Storchaka
Alexander Mohr
Nikolay Kim
Mathieu Sornay
Xiang Zhang
INADA Naoki
Yury Selivanov
Seth M. Larson