This checkin is adapted from part 1 (of 3) of Trevor Perrin's patch set.
x_mul()
- sped a little by optimizing the C
- sped a lot (~2X) if it's doing a square; note that long_pow() squares
often
k_mul()
- more cache-friendly now if it's doing a square
KARATSUBA_CUTOFF
- boosted; gradeschool mult is quicker now, and it may have been too low
for many platforms anyway
KARATSUBA_SQUARE_CUTOFF
- new
- since x_mul is a lot faster at squaring now, the point at which
Karatsuba pays for squaring is much higher than for general mult
need to convert str objects from the iterable to unicode. So, if
someone set the system default encoding to something nasty enough,
the conversion process could mutate the input iterable as a side
effect, and PySequence_Fast doesn't hide that from us if the input was
a list. IOW, can't assume the size of PySequence_Fast's result is
invariant across PyUnicode_FromObject() calls.
much to reduce the size of the code, but greatly improves its clarity.
It's also quicker in what's probably the most common case (the argument
iterable is a list). Against it, if the iterable isn't a list or a tuple,
a temp tuple is materialized containing the entire input sequence, and
that's a bigger temp memory burden. Yawn.
1. u1.join([u2]) is u2
2. Be more careful about C-level int overflow.
Since PySequence_Fast() isn't needed to achieve #1, it's not used -- but
the code could sure be simpler if it were.
happen in 2.3, but nobody noticed it still was getting generated (the
warning was disabled by default). OverflowWarning and
PyExc_OverflowWarning should be removed for 2.5, and left notes all over
saying so.
(Patch contributed by Nick Coghlan.)
Now joining string subtypes will always return a string.
Formerly, if there were only one item, it was returned unchanged.
Added XXX comment about why the undocumented PyRange_New() API function
is too broken to be worth the considerable pain of repairing.
Changed range_new() to stop using PyRange_New(). This fixes a variety
of bogus errors. Nothing in the core uses PyRange_New() now.
Documented that xrange() is intended to be simple and fast, and that
CPython restricts its arguments, and length of its result sequence, to
native C longs.
Added some tests that failed before the patch, and repaired a test that
relied on a bogus OverflowError getting raised.
hack: it would resize *interned* strings in-place! This occurred because
their reference counts do not have their expected value -- stringobject.c
hacks them. Mea culpa.
interning were not clear here -- a subclass could be mutable, for
example -- and had bugs. Explicitly interning a subclass of string
via intern() will raise a TypeError. Internal operations that attempt
to intern a string subclass will have no effect.
Added a few tests to test_builtin that includes the old buggy code and
verifies that calls like PyObject_SetAttr() don't fail. Perhaps these
tests should have gone in test_string.
unicodedata.east_asian_width(). You can still implement your own
simple width() function using it like this:
def width(u):
w = 0
for c in unicodedata.normalize('NFC', u):
cwidth = unicodedata.east_asian_width(c)
if cwidth in ('W', 'F'): w += 2
else: w += 1
return w
the case of __del__ resurrecting an object.
This makes the apparent reference leaks in test_descr go away (which I
expected) and also kills off those in test_gc (which is more surprising
but less so once you actually think about it a bit).
comma expression in listpop() that was being returned. Still essentially
unused (as it is meant to be), but now the compiler thinks it is worth
*something* by having it incremented.
of no more than 8 elements cannot fail.
listpop(): Take advantage of that its calls to list_resize() and
list_ass_slice() can't fail. This is assert'ed in a debug build now, but
in an icky way. That is, you can't say:
assert(some_call() >= 0);
because then some_call() won't occur at all in a release build. So it
has to be a big pile of #ifdefs on Py_DEBUG (yuck), or the pleasant:
status = some_call();
assert(status >= 0);
But in that case, compilers may whine in a release build, because status
appears unused then. I'm not certain the ugly trick I used here will
convince all compilers to shut up about status (status is always "used" now,
as the first (ignored) clause in a comma expression).
impossible to remember, so renamed one to something obvious. Headed
off potential signed-vs-unsigned compiler complaints I introduced by
changing the type of a vrbl to unsigned. Removed the need for the
tedious explanation about "backward pointer loops" by looping on an
int instead.
result.
list_resize(): Document the intent. Code is increasingly relying on
subtle aspects of its behavior, and they deserve to be spelled out.
list_ass_slice(): A bit more simplification, by giving it a common
error exit and initializing more values.
Be clearer in comments about what "size" means (# of elements? # of
bytes?).
While the number of elements in a list slice must fit in an int, there's
no guarantee that the number of bytes occupied by the slice will. That
malloc() and memmove() take size_t arguments is a hint about that <wink>.
So changed to use size_t where appropriate.
ihigh - ilow should always be >= 0, but we never asserted that. We do
now.
The loop decref'ing the recycled slice had a subtle insecurity: C doesn't
guarantee that a pointer one slot *before* an array will compare "less
than" to a pointer within the array (it does guarantee that a pointer
one beyond the end of the array compares as expected). This was actually
an issue in KSR's C implementation, so isn't purely theoretical. Python
probably has other "go backwards" loops with a similar glitch.
list_clear() is OK (it marches an integer backwards, not a pointer).
though I tried to be very careful. This is a slight simplification, and it
adds a new feature: a small stack-allocated "recycled" array for the cases
when we don't remove too many items.
It allows PyList_SetSlice() to never fail if:
* you are sure that the object is a list; and
* you either do not remove more than 8 items, or clear the list.
This makes a number of other places in the source code correct again -- there
are some places that delete a single item without checking for MemoryErrors
raised by PyList_SetSlice(), or that clear the whole list, and sometimes the
context doesn't allow an error to be propagated.
invariants allows the ob_item != NULL check to be replaced with an
assertion.
* Added assertions to list_init() which document and verify that the
tp_new slot establishes the invariants. This may preclude a future
bug if a custom tp_new slot is written.
to NULL during the lifetime of the object.
* listobject.c nevertheless did not conform to the other invariants,
either; fixed.
* listobject.c now uses list_clear() as the obvious internal way to clear
a list, instead of abusing list_ass_slice() for that. It makes it easier
to enforce the invariant about ob_item == NULL.
* listsort() sets allocated to -1 during sort; any mutation will set it
to a value >= 0, so it is a safe way to detect mutation. A negative
value for allocated does not cause a problem elsewhere currently.
test_sort.py has a new test for this fix.
* listsort() leak: if items were added to the list during the sort, AND if
these items had a __del__ that puts still more stuff into the list,
then this more stuff (and the PyObject** array to hold them) were
overridden at the end of listsort() and never released.
mutation during list.sort() used to rely on that listobject.c always
NULL'ed ob_item when ob_size fell to 0. That's no longer true, so the
test for list mutation during a sort is no longer reliable. Changed the
test to rely instead on that listobject.c now never NULLs-out ob_item
after (if ever) ob_item gets a non-NULL value. This new assumption is
also documented now, as a required invariant in listobject.h.
The new assumption allowed some real simplification to some of the
hairier code in listsort(), so is a Good Thing on that count.
__oct__, and __hex__. Raise TypeError if an invalid type is
returned. Note that PyNumber_Int and PyNumber_Long can still
return ints or longs. Fixes SF bug #966618.
- weakref.ref and weakref.ReferenceType will become aliases for each
other
- weakref.ref will be a modern, new-style class with proper __new__
and __init__ methods
- weakref.WeakValueDictionary will have a lighter memory footprint,
using a new weakref.ref subclass to associate the key with the
value, allowing us to have only a single object of overhead for each
dictionary entry (currently, there are 3 objects of overhead per
entry: a weakref to the value, a weakref to the dictionary, and a
function object used as a weakref callback; the weakref to the
dictionary could be avoided without this change)
- a new macro, PyWeakref_CheckRefExact(), will be added
- PyWeakref_CheckRef() will check for subclasses of weakref.ref
This closes SF patch #983019.
The builtin eval() function now accepts any mapping for the locals argument.
Time sensitive steps guarded by PyDict_CheckExact() to keep from slowing
down the normal case. My timings so no measurable impact.
tests which nicely highly highlight weaknesses).
* Initial value is now a large prime.
* Pre-multiply by the set length to add one more basis of differentiation.
* Work a bit harder inside the loop to scatter bits from sources that
may have closely spaced hash values.
All of this is necessary to make up for keep the hash function commutative.
Fortunately, the hash value is cached so the call to frozenset_hash() will
only occur once per set.
* Non-zero initial value so that hash(frozenset()) != hash(0).
* Final permutation to differentiate nested sets.
* Add logic to make sure that -1 is not a possible hash value.
iswide() for east asian width manipulation. (Inspired by David
Goodger, Reviewed by Martin v. Loewis)
- Move _PyUnicode_TypeRecord.flags to the end of the struct so that
no padding is added for UCS-4 builds. (Suggested by Martin v. Loewis)
- Neatened the braces in PyList_New().
- Made sure "indexerr" was initialized to NULL.
- Factored if blocks in PyList_Append().
- Made sure "allocated" is initialized in list_init().
close() calls would attempt to free() the buffer already free()ed on
the first close(). [bug introduced with patch #788249]
Making sure that the buffer is free()ed in file object deallocation is
a belt-n-braces bit of insurance against a memory leak.
the newly created tuples, but tuples added in the freelist are now cleared in
tupledealloc already (which is very cheap, because we are already
Py_XDECREF'ing all elements anyway).
Python should have a standard Py_ZAP macro like ZAP in pystate.c.
This gives another 30% speedup for operations such as
map(func, d.iteritems()) or list(d.iteritems()) which can both take
advantage of length information when provided.
* Split into three separate types that share everything except the
code for iternext. Saves run time decision making and allows
each iternext function to be specialized.
* Inlined PyDict_Next(). In addition to saving a function call, this
allows a redundant test to be eliminated and further specialization
of the code for the unique needs of each iterator type.
* Created a reusable result tuple for iteritems(). Saves the malloc
time for tuples when the previous result was not kept by client code
(this is the typical use case for iteritems). If the client code
does keep the reference, then a new tuple is created.
Results in a 20% to 30% speedup depending on the size and sparsity
of the dictionary.
* Factored constant structure references out of the inner loops for
PyDict_Next(), dict_keys(), dict_values(), and dict_items().
Gave measurable speedups to each (the improvement varies depending
on the sparseness of the dictionary being measured).
* Added a freelist scheme styled after that for tuples. Saves around
80% of the calls to malloc and free. About 10% of the time, the
previous dictionary was completely empty; in those cases, the
dictionary initialization with memset() can be skipped.
scheme in situations that likely won't benefit from it. This further
improves memory utilization from Py2.3 which always over-allocates
except for PyList_New().
Situations expected to benefit from over-allocation:
list.insert(), list.pop(), list.append(), and list.extend()
Situations deemed unlikely to benefit:
list_inplace_repeat, list_ass_slice, list_ass_subscript
The most gray area was for listextend_internal() which only runs
when the argument is a list or a tuple. This could be viewed as
a one-time fixed length addition or it could be viewed as wrapping
a series of appends. I left its over-allocation turned on but
could be convinced otherwise.
worth it to in-line the call to PyIter_Next().
Saves another 15% on most list operations that acceptable a general
iterable argument (such as the list constructor).
avoids creating an intermediate tuple for iterable arguments other than
lists or tuples.
In other words, a+=b no longer requires extra memory when b is not a
list or tuple. The list and tuple cases are unchanged.
for xrange and list objects).
* list.__reversed__ now checks the length of the sequence object before
calling PyList_GET_ITEM() because the mutable could have changed length.
* all three implementations are now tranparent with respect to length and
maintain the invariant len(it) == len(list(it)) even when the underlying
sequence mutates.
* __builtin__.reversed() now frees the underlying sequence as soon
as the iterator is exhausted.
* the code paths were rearranged so that the most common paths
do not require a jump.
* Replace sprintf message with a constant message string -- this error
message ran on every invocation except straight deletions but it was
only needed when the rhs was not iterable. The message was also
out-of-date and did not reflect that iterable arguments were allowed.
* For inner loops that do not make ref count adjustments, use memmove()
for fast copying and better readability.
* For inner loops that do make ref count adjustments, speed them up by
factoring out the constant structure reference and using vitem[] instead.
* Using addition instead of substraction on array indices allows the
compiler to use a fast addressing mode. Saves about 10%.
* Using PyTuple_GET_ITEM and PyList_SET_ITEM is about 7% faster than
PySequenceFast_GET_ITEM which has to make a list check on every pass.
(Championed by Bob Ippolito.)
The update() method for mappings now accepts all the same argument forms
as the dict() constructor. This includes item lists and/or keyword
arguments.
recent gcc on Linux/x86)
[ 899109 ] 1==float('nan')
by implementing rich comparisons for floats.
Seems to make comparisons involving NaNs somewhat less surprising
when the underlying C compiler actually implements C99 semantics.
utilization, and speed:
* Moved the responsibility for emptying the previous list from list_fill
to list_init.
* Replaced the code in list_extend with the superior code from list_fill.
* Eliminated list_fill.
Results:
* list.extend() no longer creates an intermediate tuple except to handle
the special case of x.extend(x). The saves memory and time.
* list.extend(x) runs
5 to 10% faster when x is a list or tuple
15% faster when x is an iterable not defining __len__
twice as fast when x is an iterable defining __len__
* the code is about 15 lines shorter and no longer duplicates
functionality.
The Py2.3 approach overallocated small lists by up to 8 elements.
The last checkin would limited this to one but slowed down (by 20 to 30%)
the creation of small lists between 3 to 8 elements.
This tune-up balances the two, limiting overallocation to 3 elements
(significantly reducing space consumption from Py2.3) and running faster
than the previous checkin.
The first part of the growth pattern (0, 4, 8, 16) neatly meshes with
allocators that trigger data movement only when crossing a power of two
boundary. Also, then even numbers mesh well with common data alignments.
realloc(). This is achieved by tracking the overallocation size in a new
field and using that information to skip calls to realloc() whenever
possible.
* Simplified and tightened the amount of overallocation. For larger lists,
this overallocates by 1/8th (compared to the previous scheme which ranged
between 1/4th to 1/32nd over-allocation). For smaller lists (n<6), the
maximum overallocation is one byte (formerly it could be upto eight bytes).
This saves memory in applications with large numbers of small lists.
* Eliminated the NRESIZE macro in favor of a new, static list_resize function
that encapsulates the resizing logic. Coverting this back to macro would
give a small (under 1%) speed-up. This was too small to warrant the loss
of readability, maintainability, and de-coupling.
* Some functions using NRESIZE had grown unnecessarily complex in their
efforts to bend to the macro's calling pattern. With the new list_resize
function in place, those other functions could be simplified. That is
being saved for a separate patch.
* The ob_item==NULL check could be eliminated from the new list_resize
function. This would entail finding each piece of code that sets ob_item
to NULL and adding a new line to invalidate the overallocation tracking
field. Rather than impose a new requirement on other pieces of list code,
it was preferred to leave the NULL check in place and retain the benefits
of decoupling, maintainability and information hiding (only PyList_New()
and list_sort() need to know about the new field). This approach also
reduces the odds of breaking an extension module.
(Collaborative effort by Raymond Hettinger, Hye-Shik Chang, Tim Peters,
and Armin Rigo.)
the same object to be collected by the cyclic GC support if they are
only referenced by a cycle. If the weakref being collected was one of
the weakrefs without callbacks, some local variables for the
constructor became invalid and have to be re-computed.
The test caused a segfault under a debug build without the fix applied.
Formerly, length data fetched from sequence objects.
Now, any object that reports its length can benefit from pre-sizing.
On one sample timing, it gave a threefold speedup for list(s) where s
was a set object.
The special-case code that was removed could return a value indicating
success but leave an exception set. test_fileinput failed in a debug
build as a result.
which can be reviewed via
http://coding.derkeiler.com/Archive/Python/comp.lang.python/2003-12/1011.html
Duncan Booth investigated, and discovered that an "optimisation" was
in fact a pessimisation for small numbers of elements in a source list,
compared to not having the optimisation, although with large numbers
of elements in the source list the optimisation was quite beneficial.
He posted his change to comp.lang.python (but not to SF).
Further research has confirmed his assessment that the optimisation only
becomes a net win when the source list has more than 100 elements.
I also found that the optimisation could apply to tuples as well,
but the gains only arrive with source tuples larger than about 320
elements and are nowhere near as significant as the gains with lists,
(~95% gain @ 10000 elements for lists, ~20% gain @ 10000 elements for
tuples) so I haven't proceeded with this.
The code as it was applied the optimisation to list subclasses as
well, and this also appears to be a net loss for all reasonable sized
sources (~80-100% for up to 100 elements, ~20% for more than 500
elements; I tested up to 10000 elements).
Duncan also suggested special casing empty lists, which I've extended
to all empty sequences.
On the basis that list_fill() is only ever called with a list for the
result argument, testing for the source being the destination has
now happens before testing source types.
bit by checking the value of UCHAR_MAX in Include/Python.h. There was a
check in Objects/stringobject.c. Remove that. (Note that we don't define
UCHAR_MAX if it's not defined as the old test did.)
and left shifts. (Thanks to Kalle Svensson for SF patch 849227.)
This addresses most of the remaining semantic changes promised by
PEP 237, except for repr() of a long, which still shows the trailing
'L'. The PEP appears to promise warnings for operations that
changed semantics compared to Python 2.3, but this is not
implemented; we've suffered through enough warnings related to
hex/oct literals and I think it's best to be silent now.
* Add more tests
* Refactor and neaten the code a bit.
* Rename union_update() to update().
* Improve the algorithms (making them a closer to sets.py).
function.
* Add a better test for deepcopying.
* Add tests to show the __init__() function works like it does for list
and tuple. Add related test.
* Have shallow copies of frozensets return self. Add related test.
* Have frozenset(f) return f if f is already a frozenset. Add related test.
* Beefed-up some existing tests.
by the function object or by the method object, the function
object's attribute usually wins. Christian Tismer pointed out that
that this is really a mistake, because this only happens for special
methods (like __reduce__) where the method object's version is
really more appropriate than the function's attribute. So from now
on, all method attributes will have precedence over function
attributes with the same name.
* Improve the hash function to increase the chance that distinct sets will
have distinct xor'd hash totals.
* Use PyDict_Merge where possible (it is faster than an equivalent iter/set
pair).
* Don't rebuild dictionaries where the input already has one.
Also SF patch 843455.
This is a critical bugfix.
I'll backport to 2.3 maint, but not beyond that. The bugs this fixes
have been there since weakrefs were introduced.
* Install the unittests, docs, newsitem, include file, and makefile update.
* Exercise the new functions whereever sets.py was being used.
Includes the docs for libfuncs.tex. Separate docs for the types are
forthcoming.
subtype_dealloc(): This left the dying object exposed to gc, so that
if cyclic gc triggered during the weakref callback, gc tried to delete
the dying object a second time. That's a disaster. subtype_dealloc()
had a (I hope!) unique problem here, as every normal dealloc routine
untracks the object (from gc) before fiddling with weakrefs etc. But
subtype_dealloc has obscure technical reasons for re-registering the
dying object with gc (already explained in a large comment block at
the bottom of the function).
The fix amounts to simply refraining from reregistering the dying object
with gc until after the weakref callback (if any) has been called.
This is a critical bug (hard to predict, and causes seemingly random
memory corruption when it occurs). I'll backport it to 2.3 later.
charmaptranslate_makespace() allocated more memory than required for the
next replacement but didn't remember that fact, so memory size was growing
exponentially every time a replacement string is longer that one character.
This fixes SF bug #828737.
key provides C support for the decorate-sort-undecorate pattern.
reverse provide a stable sort of the list with the comparisions reversed.
* Amended the docs to guarantee sort stability.
If a length-1 Unicode string was in the freelist and it was
uninitialized or pointed to a very large (magnitude) negative number,
the check
unicode_latin1[unicode->str[0]] == unicode
could cause a segmentation violation, e.g. unicode->str[0] is 0xcbcbcbcb.
Fix this in two ways:
1. Change guard befor unicode_latin1[] to test against 256U. If I
understand correctly, the unsigned long used to store UCS4 on my
box was getting converted to a signed long to compare with the
signed constant 256.
2. Change _PyUnicode_New() to make sure the first element of str is
always initialized to zero. There are several places in the code
where the caller can exit with an error before initializing any
of str, which would leave junk in str[0].
Also, silence a compiler warning on pointer vs. int arithmetic.
Bug fix candidate.
The unicode_resize() family only returns -1 or 0 so simply checking
for != 0 is sufficient, but somewhat unclear. Many Python API
functions return < 0 on error, reserving the right to return 0 or 1 on
success. Change the call sites for consistency with these calls.
file_truncate(): C doesn't define what fflush(fp) does if fp is open
for update, and the preceding I/O operation on fp was input. On Windows,
fflush() actually changes the current file position then. Because
Windows doesn't support ftruncate() directly, this not only caused
Python's file.truncate() to change the file position (contra our docs),
it also caused the file not to change size.
Repaired by getting the initial file position at the start, restoring
it at the end, and tossing all the complicated micro-efficiency checks
trying to avoid "provably unnecessary" seeks. file.truncate() can't
be a frequent operation, and seeking to the current file position has
got to be cheap anyway.
Bugfix candidate.
[ 784825 ] fix obscure crash in descriptor handling
Should be applied to release23-maint and in all likelyhood
release22-maint, too.
Certainly doesn't apply to release21-maint.
number. This accounts for the 2 refcount leaks per test_complex run
Michael Hudson discovered (I figured only I would have the stomach to
look for leaks in floating-point code <wink>).
when an encoding error occurs and the callback name is unknown,
i.e. when the callback has to be called. The problem was that
the fact that the callback has already been looked up was only
recorded in a local variable in charmap_encoding_error(), because
charmap_encoding_error() got it's own copy of the errorHandler
pointer instead of a pointer to the pointer in
PyUnicode_EncodeCharmap().
Now test_descr only appears to leak two references & I think this
are in fact illusory (it's to do with things getting resurrected in
__del__ methods & it's easy to be believe confusion occurs when that
happens <wink>). Woohoo!
Sure looks like it to me! <wink>
When I run the leak2.py script I posted to python-dev, I only see
three reference leaks in all of test_descr. When I run
test_descr.test_main, I still see 46 leaks. This clearly demands
posting a yelp to python-dev :-)
This certainly should be applied to release23-maint, and in all
likelyhood release22-maint as well.
The !PyType_Check(base) check snuck in as part of rev 2.215, but was
unrelated to the SF patch that is mentioned in the checkin comment.
The test is currently unnecessary because base is set to the return
value of best_bases(), which returns a type or NULL.
float_pow(): Don't let the platform pow() raise -1.0 to an integer power
anymore; at least glibc gets it wrong in some cases. Note that
math.pow() will continue to deliver wrong (but platform-native) results
in such cases.
tp_free is NULL or PyObject_Del at the end. Because it's a base type
it must call tp_free in its dealloc function, and because it's gc'able
it must not call PyObject_Del.
inherit_slots(): Don't inherit tp_free unless the type and its base
agree about whether they're gc'able. If the type is gc'able and the
base is not, and the base uses the default PyObject_Del for its
tp_free, give the type PyObject_GC_Del for its tp_free (the appropriate
default for a gc'able type).
cPickle.c: The Pickler and Unpickler types claim to be base classes
and gc'able, but their dealloc functions didn't call tp_free.
Repaired that. Also call PyType_Ready() on these typeobjects, so
that the correct (PyObject_GC_Del) default memory-freeing function
gets plugged into these types' tp_free slots.
Reverted a Py2.3b1 change to iterator in subclasses of list and tuple.
They had been changed to use __getitem__ whenever it had been overriden
in the subclass.
This caused some usabilty and performance problems. Also, it was
inconsistent with the rest of python where many container methods
access the underlying object directly without first checking for
an overridden getter. Users needing a change in iterator behavior
should override it directly.
* Increase dictionary growth rate resulting in more sparse dictionaries,
fewer lookup collisions, increased memory use, and better cache
performance. For dicts with over 50k entries, keep the current
growth rate in case an application is suffering from tight memory
constraints.
* Set the most common case (no resize) to fall-through the test.
Some version of gcc in the "RTEMS port running on the Coldfire (m5200)
processor" generates bad code for a loop in long_from_binary_base(),
comparing the wrong half of an int to a short. The patch changes the
decl of the short temp to be an int temp instead. This "simplifies"
the code enough that gcc no longer blows it.
As a side issue on this bug, it was noted that list and tuple iterators
used macros to directly access containers and would not recognize
__getitem__ overrides. If the method is overridden, the patch returns
a generic sequence iterator which calls the __getitem__ method; otherwise,
it returns a high custom iterator with direct access to container elements.
raising an exception. This is consistent with calling the
constructors for the other builtin types -- called without argument
they all return the false value of that type. (SF patch #724135)
Thanks to Alex Martelli.
I'm finding some pretty baffling output, like reprs consisting entirely
of three left parens. At least this will let us know what type the object
is (it's not str -- there's no quote character in the repr).
New tool combinerefs.py, to combine the two output blocks produced via
PYTHONDUMPREFS.
new line.
New pvt API function _Py_PrintReferenceAddresses(): Prints only the
addresses and refcnts of the live objects. This is always safe to call,
because it has no dependence on Python's C API.
Py_Finalize(): If envar PYTHONDUMPREFS is set, call (the new)
_Py_PrintReferenceAddresses() right before dumping final pymalloc stats.
We can't print the reprs of the objects here because too much of the
interpreter has been shut down. You need to correlate the addresses
displayed here with the object reprs printed by the earlier
PYTHONDUMPREFS call to _Py_PrintReferences().
New functions:
unsigned long PyInt_AsUnsignedLongMask(PyObject *);
unsigned PY_LONG_LONG) PyInt_AsUnsignedLongLongMask(PyObject *);
unsigned long PyLong_AsUnsignedLongMask(PyObject *);
unsigned PY_LONG_LONG) PyLong_AsUnsignedLongLongMask(PyObject *);
New and changed format codes:
b unsigned char 0..UCHAR_MAX
B unsigned char none **
h unsigned short 0..USHRT_MAX
H unsigned short none **
i int INT_MIN..INT_MAX
I * unsigned int 0..UINT_MAX
l long LONG_MIN..LONG_MAX
k * unsigned long none
L long long LLONG_MIN..LLONG_MAX
K * unsigned long long none
Notes:
* New format codes.
** Changed from previous "range-and-a-half" to "none"; the
range-and-a-half checking wasn't particularly useful.
New test test_getargs2.py, to verify all this.
even farther down, to just before the call to
_PyObject_DebugMallocStats(). This required the following changes:
- pystate.c, PyThreadState_GetDict(): changed not to raise an
exception or issue a fatal error when no current thread state is
available, but simply return NULL without raising an exception
(ever).
- object.c, Py_ReprEnter(): when PyThreadState_GetDict() returns NULL,
don't raise an exception but return 0. This means that when
printing a container that's recursive, printing will go on and on
and on. But that shouldn't happen in the case we care about (see
first bullet).
- Updated Misc/NEWS and Doc/api/init.tex to reflect changes to
PyThreadState_GetDict() definition.
interpreted by slicing, so negative values count from the end of the
list. This was the only place where such an interpretation was not
placed on a list index.
* Doc - add doc for when functions were added
* UserString
* string object methods
* string module functions
'chars' is used for the last parameter everywhere.
These changes will be backported, since part of the changes
have already been made, but they were inconsistent.
If a class was defined inside a function, used a static or class
method, and used super() inside the method body, it would be caught in
an uncollectable cycle. (Simplified version: The static/class method
object would point to a function object with a closure that referred
to the class.)
Bugfix candidate.
Arranged that all the objects exposed by __builtin__ appear in the list
of all objects. I basically peed away two days tracking down a mystery
leak in sys.gettotalrefcount() in a ZODB app (== tons of code), because
the object leaking the references didn't appear in the sys.getobjects(0)
list. The object happened to be False. Now False is in the list, along
with other popular & previously missing leak candidates (like None).
Alas, we still don't have a choke point covering *all* Python objects,
so the list of all objects may still be incomplete.
_Py_AddToAllObjects() that simply inserts an object at the front of
the doubly-linked list of all objects. Changed PyType_Ready() (the
closest thing we've got to a choke point for type objects) to call
that.
a doubly-linked list, exposed by sys.getobjects(). Unfortunately, it's not
really all live objects, and it seems my fate to bump into programs where
sys.gettotalrefcount() keeps going up but where the reference leaks aren't
accounted for by anything in the list of all objects.
This patch helps a little: if COUNT_ALLOCS is also defined, from now on
type objects will also appear in this list, provided at least one object
of a type has been allocated.
constructor, when passed a single complex argument, returns the
argument unchanged. This should be done only for the complex base
class; a complex subclass should of course cast the value to the
subclass in this case.
The fix also revealed a segfault in complex_getnewargs(): the argument
for the Py_BuildValue() format code "D" is the *address* of a
Py_complex struct, not the value. (This corroborated by the API
documentation.)
I expect this needs to be backported to 2.2.3.
This still falls back to helpers in copy_reg for:
- pickle protocols < 2
- calculating the list of slot names (done only once per class)
- the __newobj__ function (which is used as a token but never called)
the PyInt_AsLong function, and this returns a long, the value is first
retrieved with PyLong_AsLong, but afterwards overwritten by a call to
PyInt_AS_LONG.
Fixes SF #690253.
Don't access tp_descr_{get,set} of a descriptor without checking the
flag bits of the descriptor's type. While we know that the main type
(the type of the object whose attribute is being accessed) has all the
right flag bits (or else PyObject_Generic{Get,Set}Attr wouldn't be
called), we don't know that for its class attributes!
Will backport to 2.2.
using super() for an instance in a metaclass situation. Because the
class was a metaclass, the instance was a class, and hence the
PyType_Check() branch was taken. But this branch didn't apply. Make
it so that if this branch doesn't apply, the other branch is still
tried. All tests pass.
the optional proto 2 slot state.
pickle.py, load_build(): CAUTION: Noted that cPickle's
load_build and pickle's load_build really don't do the same
things with the state, and didn't before this patch either.
cPickle never tries to do .update(), and has no backoff if
instance.__dict__ can't be retrieved. There are no tests
that can tell the difference, and part of what cPickle's
load_build() did looked accidental to me, so I don't know
what the true intent is here.
pickletester.py, test_pickle.py: Got rid of the hack for
exempting cPickle from running some of the proto 2 tests.
dictobject.c, PyDict_Next(): documented intended use.
This changes the default __new__ to refuse arguments iff tp_init is the
default __init__ implementation -- thus making it a TypeError when you
try to pass arguments to a constructor if the class doesn't override at
least __init__ or __new__.
folded; this will change in Python 2.4. On a 32-bit machine, this
happens for 0x80000000 through 0xffffffff, and for octal constants in
the same value range. No warning is issued if an explicit base is
given, *or* if the string contains a sign (since in those cases no
sign folding ever happens).
descr_check(); it wasn't useful. Change the type argument of the
various _get() methods to PyObject * because the call signature of
tp_descr_get doesn't guarantee its type.
when Python code calls a descriptor's __get__ method. It should
translate None to NULL in both argument positions, and insist that at
least one of the argument positions is not NULL after this
transformation.
For the case where the current globals match the previous frame's
globals, eliminates three tests in two if statements. For the case
where we just get __builtins__ from a module, eliminate a couple of
tests.
wasn't used outside the assert (and hence caused a compiler warning
about an unused variable in NDEBUG mode). The assert wasn't very
useful any more.
_PyLong_NumBits(): moved the calculation of ndigits after asserting
that v != NULL.
Assorted code cleanups; e.g., sizeof(char) is 1 by definition, so there's
no need to do things like multiply by sizeof(char) in hairy malloc
arguments. Fixed an undetected-overflow bug in readline_file().
longobject.c: Fixed a really stupid bug in the new _PyLong_NumBits.
pickle.py: Fixed stupid bug in save_long(): When proto is 2, it
wrote LONG1 or LONG4, but forgot to return then -- it went on to
append the proto 1 LONG opcode too.
Fixed equally stupid cancelling bugs in load_long1() and
load_long4(): they *returned* the unpickled long instead of pushing
it on the stack. The return values were ignored. Tests passed
before only because save_long() pickled the long twice.
Fixed bugs in encode_long().
Noted that decode_long() is quadratic-time despite our hopes,
because long(string, 16) is still quadratic-time in len(string).
It's hex() that's linear-time. I don't know a way to make decode_long()
linear-time in Python, short of maybe transforming the 256's-complement
bytes into marshal's funky internal format, and letting marshal decode
that. It would be more valuable to make long(string, 16) linear time.
pickletester.py: Added a global "protocols" vector so tests can try
all the protocols in a sane way. Changed test_ints() and test_unicode()
to do so. Added a new test_long(), but the tail end of it is disabled
because it "takes forever" under pickle.py (but runs very quickly under
cPickle: cPickle proto 2 for longs is linear-time).
__module__ is the string name of the module the function was defined
in, just like __module__ of classes. In some cases, particularly for
C functions, the __module__ may be None.
Change PyCFunction_New() from a function to a macro, but keep an
unused copy of the function around so that we don't change the binary
API.
Change pickle's save_global() to use whichmodule() if __module__ is
None, but add the __module__ logic to whichmodule() since it might be
used outside of pickle.
error handers in the Unicode codecs: Negative
positions are treated as being relative to the end of
the input and out of bounds positions result in an
IndexError.
Also update the PEP and include an explanation of
this in the documentation for codecs.register_error.
Fixes a small bug in iconv_codecs: if the position
from the callback is negative *add* it to the size
instead of substracting it.
From SF patch #677429.
needs of pickling longs. Backed off to a definition that's much easier
to understand. The pickler will have to work a little harder, but other
uses are more likely to be correct <0.5 wink>.
_PyLong_Sign(): New teensy function to characterize a long, as to <0, ==0,
or >0.
types. The special handling for these can now be removed from save_newobj().
Add some testing for this.
Also add support for setting the 'fast' flag on the Python Pickler class,
which suppresses use of the memo.
start for the C implemention of new pickle LONG1 and LONG4 opcodes (the
linear-time way to pickle a long is to call _PyLong_AsByteArray, but
the caller has no idea how big an array to allocate, and correct
calculation is a bit subtle).
was broken because new-in-2.3 code added a tp_as_mapping slot to tuples.
Repaired that.
Added basic docs to check_recursion().
The code that intended to exempt tuples and strings was also broken here,
and in 2.2: these should use PyXYZ_CheckExact(), not PyXYZ_Check() -- we
can't know whether subclass instances are immutable. This part (and this
part alone) is a bugfix candidate.
Christian Tismer pointed out the high cost of the loop overhead and
function call overhead for 'c' * n where n is large. Accordingly,
the new code only makes lg2(n) loops.
Interestingly, 'c' * 1000 * 1000 ran a bit faster with old code. At some
point, the loop and function call overhead became cheaper than invalidating
the cache with lengthy memcpys. But for more typical sizes of n, the new
code runs much faster and for larger values of n it runs only a bit slower.
Refactor code in PyCFunction_Call giving a modest (tiny) speed boost,
a slight improvement in semantics (now detects invalid flag combinations),
and (arguably) improved clarity (making it blindingly clear which flag
combinations are allowed). All this comes at a cost of a few lines of
code duplication.
* Folded test for METH_KEYWORDS into the switch/case.
* Deferred testing for an empty dictionary until when and where needed.
* Make a similar deferral for filling the "size" variable.
* Inverted the dictionary test so that the common case falls though
instead of making a jump.
645404). I'm not 100% sure this is the right fix, so I'll keep the
bug report open for Samuele, but this fixes the index error and passes
the test suite (and I can't see why it *shouldn't* be the right fix
:-).
Initialize the small integers and __builtins__ in startup.
This removes some if conditions.
Change XDECREF to DECREF for values which shouldn't be NULL.
andsq_inplace_repeat. This fixes a number of corner case bugs (see #624807).
Consolidate the int and long sequence repeat code. Before the change, integers
checked for integer overflow but longs did not.
Obtain cleaner coding and a system wide
performance boost by using the fast, pre-parsed
PyArg_Unpack function instead of PyArg_ParseTuple
function which is driven by a format string.
[ 643835 ] Set Next Statement for Python debuggers
with a few tweaks by me: adding an unsigned or two, mentioning that
not all jumps are allowed in the doc for pdb, adding a NEWS item and
a note to whatsnew, and AuCTeX doing something cosmetic to libpdb.tex.
[#521782] unreliable file.read() error handling
* Objects/fileobject.c
(file_read): Clear errors before leaving the loop in all situations,
and also check if some data was read before exiting the loop with an
EWOULDBLOCK exception.
* Doc/lib/libstdtypes.tex
* Objects/fileobject.c
Document that sometimes a read() operation can return less data than
what the user asked, if running in non-blocking mode.
* Misc/NEWS
Document the fix.
containing class objects) are allowed as the second argument.
This makes issubclass() more similar to isinstance() where recursive
tuples are allowed too.
supported as the second argument. This has the same meaning as
for isinstance(), i.e. issubclass(X, (A, B)) is equivalent
to issubclass(X, A) or issubclass(X, B). Compared to isinstance(),
this patch does not search the tuple recursively for classes, i.e.
any entry in the tuple that is not a class, will result in a
TypeError.
This closes SF patch #649608.
Most of these patches are from Thomas Heller, with long lines folded
by Tim. The change to test_descr.py is from Guido. See the bug report.
Not a bugfix candidate -- METH_CLASS is new in 2.3.
Just van Rossum showed a weird, but clever way for pure python code to
trigger the BadInternalCall. The C code had assumed that calling a class
constructor would return an instance of that class; however, classes that
abuse __new__ can invalidate that assumption.
see problems with my code that I didn't see before the checkin, but:
When a subtype .mro() fails, we need to reset the type whose __bases__
are being changed, too. Fix + test.
[ 635933 ] make some type attrs writable
Plus a couple of extra tests beyond what's up there.
It hasn't been as carefully reviewed as it perhaps should, so all readers
are encouraged, nay exhorted, to give this a close reading.
There are still a couple of oddities related to assigning to __name__,
but I intend to solicit python-dev's opinions on these.
messages about MRO conflicts. (The tweaks include correcting spelling
errors, some refactoring to get the name of classic classes, and a
style nit or two.)
long but the double is too big to fit in a long. Prevent that. This
closes some recent bug or patch on SF, but SF is down now so I can't
say which.
Bugfix candidate.
Py_Init crash". refchain cannot be cleared because objects can live across
Py_Finalize() and Py_Initialize() if they are kept alive by circular
references.
619475; also closing SF bug 618704). I tweaked his code a bit for
style.
This raises TypeError for MRO order disagreements, which is an
improvement (previously these went undetected) but also a degradation:
what if the order disagreement doesn't affect any method lookups?
I don't think I care.
When mwh added extended slicing, strings and unicode became mappings.
Thus, dict was set which prevented an error when doing:
newstr = 'format without a percent' % string_value
This fix raises an exception again when there are no formats
and % with a string value.
Armin Rigo's Draconian but effective fix for
SF bug 453523: list.sort crasher
slightly fiddled to catch more cases of list mutation. The dreaded
internal "immutable list type" is gone! OTOH, if you look at a list
*while* it's being sorted now, it will appear to be empty. Better
than a core dump.
/* this is harder to get right than you might think */
angered some God somewhere. After noticing
>>> range(5000000)[slice(96360, None, 439)]
[]
I found that my cute test for the slice being empty failed due to
overflow. Fixed, and added simple test (not the above!).
classes was called with three arguments. This makes no sense, there's
no way to pass in the "modulo" 3rd argument as for __pow__, and
classic classes don't do this. [SF bug 620179]
I don't want to backport this to 2.2.2, because it could break
existing code that has developed a work-around. Code in 2.2.2 that
wants to use __ipow__ and wants to be forward compatible with 2.3
should be written like this:
def __ipow__(self, exponent, modulo=None):
...
macros. The 'op' argument is then the result from PyObject_MALLOC,
and that can of course be NULL. In that case, PyObject_Init[Var]
would raise a SystemError with "NULL object passed to
PyObject_Init[Var]". But there's nothing the caller of the macro can
do about this. So PyObject_Init[Var] should call just PyErr_NoMemory.
Will backport.
'%2147483647d' % -123 segfaults. This was because an integer overflow
in a comparison caused the string resize to be skipped. After fixing
the overflow, this could call _PyString_Resize() with a negative size,
so I (1) test for that and raise MemoryError instead; (2) also added a
test for negative newsize to _PyString_Resize(), raising SystemError
as for all bad arguments.
An identical bug existed in unicodeobject.c, of course.
Will backport to 2.2.2.
Also fixed an error message -- %s argument has non-string str()
doesn't make sense for %r, so the error message now differentiates
between %s and %r.
because PyObject_Repr() and PyObject_Str() ensure that this can never
happen. Added a helpful comment instead.
sees a Unicode argument. Unfortunately this test was also executed
for %r, because %s and %r share almost all of their code. This meant
that, if u is a unicode object while repr(u) is an 8-bit string
containing ASCII characters, '%r' % u is a *unicode* string containing
only ASCII characters!
Fixed by executing the test only for %s.
Also fixed an error message -- %s argument has non-string str()
doesn't make sense for %r, so the error message now differentiates
between %s and %r.
Tim Peters
Raymond Hettinger
Martin v. Löwis
Neal Norwitz
Michael W. Hudson
Brett Cannon
Armin Rigo
Jeremy Hylton
Hye-Shik Chang
Fred Drake
Marc-André Lemburg
Neil Schemenauer
Nicholas Bastin
Anthony Baxter
Skip Montanaro
Andrew M. Kuchling
Walter Dörwald
Thomas Heller
Andrew MacIntyre
Phillip J. Eby
Guido van Rossum
Jim Fulton
Jack Jansen
Mark Hammond
Greg Ward
Gustavo Niemeyer
Just van Rossum