Add new functions to get the Python interpreter behavior:
* _PyPreConfig_InitPythonConfig()
* _PyCoreConfig_InitPythonConfig()
Add new functions to get an isolated configuration:
* _PyPreConfig_InitIsolatedConfig()
* _PyCoreConfig_InitIsolatedConfig()
Replace _PyPreConfig_INIT and _PyCoreConfig_INIT with new functions
_PyPreConfig_Init() and _PyCoreConfig_Init().
_PyCoreConfig: set configure_c_stdio and parse_argv to 0 by default
to behave as Python 3.6 in the default configuration.
_PyCoreConfig_Read() no longer sets coerce_c_locale_warn to 1 if it's
equal to 0. coerce_c_locale_warn must now be set to -1 (ex: using
_PyCoreConfig_InitPythonConfig()) to enable C locale coercion
warning.
Add unit tests for _PyCoreConfig_InitPythonConfig()
and _PyCoreConfig_InitIsolatedConfig().
Changes:
* Rename _PyCoreConfig_GetCoreConfig() to _PyPreConfig_GetCoreConfig()
* Fix core_read_precmdline(): handle parse_argv=0
* Fix _Py_PreInitializeFromCoreConfig(): pass coreconfig.argv
to _Py_PreInitializeFromPyArgv(), except if parse_argv=0
* Add PyMemAllocatorName enum
* _PyPreConfig.allocator type becomes PyMemAllocatorName, instead of
char*
* Remove _PyPreConfig_Clear()
* Add _PyMem_GetAllocatorName()
* Rename _PyMem_GetAllocatorsName() to
_PyMem_GetCurrentAllocatorName()
* Remove _PyPreConfig_SetAllocator(): just call
_PyMem_SetupAllocators() directly, we don't have do reallocate the
configuration with the new allocator anymore!
* _PyPreConfig_Write() parameter becomes const, as it should be in
the first place!
Instead of maintaining the same doc string two times, let's copy common
doc strings from SSLObject methods and properties to SSLSocket.
Signed-off-by: Christian Heimes <christian@python.org>
Move the check for dead conditionals (if 0) to the peephole optimizer
and make sure that the code block is still compiled to report any
existing syntax errors within.
This PR proposes a solution to [bpo-35545](https://bugs.python.org/issue35545) by adding an optional `flowinfo` and `scopeid` to `asyncio.base_events._ipaddr_info` to carry the full address information into `_ipaddr_info` and avoid discarding IPv6 specific information.
Changelog entry & regression tests to come.
https://bugs.python.org/issue35545
The final addition (cur += step) may overflow, so use size_t for "cur".
"cur" is always positive (even for negative steps), so it is safe to use
size_t here.
Co-Authored-By: Martin Panter <vadmium+py@gmail.com>
* Add a private _Py_InitializeMain() function.
* Add again _PyCoreConfig._init_main.
* _Py_InitializeFromConfig() now uses _init_main to decide
if _Py_InitializeMainInterpreter() should be called.
* _PyCoreConfig: rename _frozen to pathconfig_warnings, its value is
now the opposite of Py_FrozenFlag.
* Add an unit test for _init_main=0 and _Py_InitializeMain().
* _PyCoreConfig_Read() doesn't parse nor update argv
if parse_argv is 0.
* Move path configuration fields in _PyCoreConfig.
* Add an unit test for parse_argv=0.
* Remove unused "done": label in _Py_RunMain().
Similarly to how several pathlib file creation functions have an "exists_ok" parameter, we should introduce "missing_ok" that makes removal functions not raise an exception when a file or directory is already absent. IMHO, this should cover Path.unlink and Path.rmdir. Note, Path.resolve() has a "strict" parameter since 3.6 that does the same thing. Naming this of this new parameter tries to be consistent with the "exists_ok" parameter as that is more explicit about what it does (as opposed to "strict").
https://bugs.python.org/issue33123
Plistlib currently throws an exception when asked to decode a valid
.plist file that was generated by Apple's NSKeyedArchiver. Specifically,
this is caused by a byte 0x80 (signifying a UID) not being understood.
This fixes the problem by enabling the binary plist reader and writer
to read and write plistlib.UID objects.
Remove UNTESTED_CORE_CONFIG from test_embed.InitConfigTests: all core
config fields are now tested!
Changes:
* Test also dll_path on Windows
* Add run_main_config unit test: test config using _Py_RunMain().
When using multiprocessing (-jN option), worker processes now create
their temporary directory inside the temporary directory of the
main process. So the main process is able to remove temporary
directories of worker processes even if they crash or when they are
killed by regrtest on KeyboardInterrupt (CTRL+c).
Rework also how multiprocessing arguments are parsed in main.py.
"python3 -m test -jN ..." now continues the execution of next tests
when a worker process crash (CHILD_ERROR state). Previously, the test
suite stopped immediately. Use --failfast to stop at the first error.
Moreover, --forever now also implies --failfast.
In the parser, when using the type_comments=True option, recognize
a TYPE_IGNORE as anything containing `# type: ignore` followed by
a non-alphanumeric character. This is to allow ignores such as
`# type: ignore[E1000]`.
The multiprocessing.resource_tracker replaces the multiprocessing.semaphore_tracker module. Other than semaphores, resource_tracker also tracks shared_memory segments. Patch by Pierre Glaser.
Add new trashcan macros to deal with a double deallocation that could occur when the `tp_dealloc` of a subclass calls the `tp_dealloc` of a base class and that base class uses the trashcan mechanism.
Patch by Jeroen Demeyer.
Extended attributes can only be set on user-writeable files, but shutil previously
first chmod()ed the destination file to the source's permissions and then tried to
copy xattrs. This will cause failures if attempting to copy read-only files with
xattrs, as occurs with Git clones on Lustre FS.
If a "=" is specified a the end of an f-string expression, the f-string will evaluate to the text of the expression, followed by '=', followed by the repr of the value of the expression.
Allow reduction methods to return a 6-item tuple where the 6th item specifies a
custom state-setting method that's called instead of the regular
``__setstate__`` method.
* bpo-36832: add zipfile.Path
* bpo-36832: add documentation for zipfile.Path
* 📜🤖 Added by blurb_it.
* Remove module reference from blurb.
* Sort the imports
* Update docstrings and docs per recommendations.
* Rely on test.support.temp_dir
* Signal that 'root' is the parameter.
* Correct spelling of 'mod'
* Convert docstring to comment for brevity.
* Fix more errors in the docs
* BPO-27639: Correct return type for UserList slicing operation
Added logic to __getitem__ magic method for UserList to ensure that the return
type matches that of self.
When the future returned by shield is cancelled, its completion callback of the
inner future is not removed. This makes the callback list of inner inner future
grow each time a shield is created and cancelled.
This change unregisters the callback from the inner future when the outer
future is cancelled.
https://bugs.python.org/issue35125
*Moved from python/asyncio#493.*
This PR fixes issue python/asyncio#480, as explained in [this comment](https://github.com/python/asyncio/issues/480#issuecomment-278703828).
The `_SelectorDatagramTransport.sendto` method has to be modified ~~so `_sock.sendto` is used in all cases (because it is tricky to reliably tell if the socket is connected or not). Could that be an issue for connected sockets?~~ *EDIT* ... so `_sock.send` is used only if `_sock` is connected.
It also protects `socket.getsockname` against `OSError` in `_SelectorTransport`. This might happen on Windows if the socket is not connected (e.g. for UDP broadcasting).
https://bugs.python.org/issue31922
Instead of attempting to acquire and release them all across fork
which was leading to deadlocks in some applications that had chained
their own handlers while holding multiple locks.
Modern Linux distros such as Debian Buster have default OpenSSL system
configurations that reject connections to servers with weak certificates
by default. This causes our test suite run with external networking
resources enabled to skip these tests when they encounter such a failure.
Fixing the network servers is a separate issue.
Added two keyword arguments, `delay` and `interleave`, to
`BaseEventLoop.create_connection`. Happy eyeballs is activated if
`delay` is specified.
We now have documentation for the new arguments. `staggered_race()` is in its own module, but not exported to the main asyncio package.
https://bugs.python.org/issue33530
* Include C14N 2.0 test data in installation.
* Add README file to the C14N test data directory to reference the original source and licensing conditions.
This was achieved by:
* moving many pass statements in tests onto their own lines, so they pass line coverage and can match an easy ignore pattern if branch coverage is added later.
* removing code that cannot be reached.
* removing long-disabled tests.
* removing unused code.
* adding tests for uncovered code
It turned out that removing `if __name__ == '__main__'` blocks that run unittest.main() at the bottom of test files was surprisingly contentious, so they remain and can be filtered out with an appropriate .coveragerc.
* Implement C14N 2.0 as a new canonicalize() function in ElementTree.
Missing features:
- prefix renaming in XPath expressions (tag and attribute text is supported)
- preservation of original prefixes given redundant namespace declarations
* bpo-36673: Implement comment/PI parsing support for the TreeBuilder in ElementTree.
* bpo-36673: Rewrite the comment/PI factory handling for the TreeBuilder in "_elementtree" to make it use the same factories as the ElementTree module, and to make it explicit when the comments/PIs are inserted into the tree and when they are not (which is the default).
This is consistent with the rest of the `warnings.warn` usage in the
inspect.py module and aids identifying code that needs to be fixed.
This warning came in via d5d2b45469
Disallow control chars in http URLs in urllib.urlopen. This addresses a potential security problem for applications that do not sanity check their URLs where http request headers could be injected.
When an attribute is deleted from a Mock, a sentinel is added rather
than just deleting the attribute. This commit checks for such sentinels
when returning the child mocks in the __dir__ method as users won't
expect deleted attributes to appear when performing dir(mock).
This commit contains the implementation of PEP570: Python positional-only parameters.
* Update Grammar/Grammar with new typedarglist and varargslist
* Regenerate grammar files
* Update and regenerate AST related files
* Update code object
* Update marshal.c
* Update compiler and symtable
* Regenerate importlib files
* Update callable objects
* Implement positional-only args logic in ceval.c
* Regenerate frozen data
* Update standard library to account for positional-only args
* Add test file for positional-only args
* Update other test files to account for positional-only args
* Add News entry
* Update inspect module and related tests
In the process of converting the date.fromtimestamp function to use
argument clinic in GH-8535, the C API for PyDate_FromTimestamp was
inadvertently changed to expect a timestamp object rather than an
argument tuple.
This PR fixes this backwards-incompatible change by adding a new wrapper
function for the C API function that unwraps the argument tuple and
passes it to the underlying function.
This PR also adds tests for both PyDate_FromTimestamp and
PyDateTime_FromTimestamp to prevent any further regressions.
regrtest now always detects uncollectable objects. Previously, the
check was only enabled by --findleaks. The check now also works with
-jN/--multiprocess N.
--findleaks becomes a deprecated alias to --fail-env-changed.
Rewrite run_tests_multiprocess() function as a new MultiprocessRunner
class with multiple methods to better report errors and stop
immediately when needed.
Changes:
* Worker processes are now killed immediately if tests are
interrupted or if a test does crash (CHILD_ERROR): worker
processes are killed.
* Rewrite how errors in a worker thread are reported to
the main thread. No longer ignore BaseException or parsing errors
silently.
* Remove 'finished' variable: use worker.is_alive() instead
* Always compute omitted tests. Add Regrtest.get_executed() method.
* Add TestResult and MultiprocessResult types to ensure that results
always have the same fields.
* runtest() now handles KeyboardInterrupt
* accumulate_result() and format_test_result() now takes a TestResult
* cleanup_test_droppings() is now called by runtest() and mark the
test as ENV_CHANGED if the test leaks support.TESTFN file.
* runtest() now includes code "around" the test in the test timing
* Add print_warning() in test.libregrtest.utils to standardize how
libregrtest logs warnings to ease parsing the test output.
* support.unload() is now called with abstest rather than test_name
* Rename 'test' variable/parameter to 'test_name'
* dash_R(): remove unused the_module parameter
* Remove unused imports
On Unix, C extensions are no longer linked to libpython.
It is now possible to load a C extension built using a shared library
Python with a statically linked Python.
When Python is embedded, libpython must not be loaded with
RTLD_LOCAL, but RTLD_GLOBAL instead. Previously, using RTLD_LOCAL, it
was already not possible to load C extensions which were not linked
to libpython, like C extensions of the standard library built by the
"*shared*" section of Modules/Setup.
distutils, python-config and python-config.py have been modified.
bpo-28552, bpo-7774: Fix distutils.sysconfig if sys.executable is
None or an empty string: use os.getcwd() to initialize project_base.
Fix also the distutils build command: don't use sys.executable if
it's evaluated as false (None or empty string).
Release build and debug build are now ABI compatible: the Py_DEBUG
define no longer implies Py_TRACE_REFS define which introduces the
only ABI incompatibility.
A new "./configure --with-trace-refs" build option is now required to
get Py_TRACE_REFS define which adds sys.getobjects() function and
PYTHONDUMPREFS environment variable.
Changes:
* Add ./configure --with-trace-refs
* Py_DEBUG no longer implies Py_TRACE_REFS
Change test_time.test_monotonic() to test only the lower bound of elapsed time
after a sleep command rather than the upper bound. This prevents unnecessary
test failures on slow buildbots. Patch by Victor Stinner.
Add a new _testinternalcapi module to test the internal C API.
Move _Py_GetConfigsAsDict() function to the internal C API:
_testembed now uses _testinternalcapi to access the function.
shutil.which() and distutils.spawn.find_executable() now use
os.confstr("CS_PATH") if available instead of os.defpath, if the PATH
environment variable is not set.
Don't use os.confstr("CS_PATH") nor os.defpath if the PATH
environment variable is set to an empty string to mimick Unix 'which'
command behavior.
Changes:
* find_executable() now starts by checking for the executable in the
current working directly case. Add an explicit
"if not path: return None".
* Add tests for PATH='' (empty string), PATH=':' and for PATHEXT.
IPv4Interface and IPv6Interface did not has netmask and hostmask
attributes when its argument is bytes or int.
This commit extracts method for constructors of Network and Interface,
and ensure Interface class always provides them.
The imap.IMAP4.logout() method no longer ignores silently arbitrary
exceptions.
Changes:
* The IMAP4.logout() method now expects a "BYE" untagged response,
rather than relying on _check_bye() which raises a self.abort()
exception.
* IMAP4.__exit__() now does nothing if the client already logged out.
* Add more debug info if test_logout() tests fail.
Add new keyword arguments "default_namespace" and "xml_declaration" to functions ET.tostring() and ET.tostringlist(), as known from ElementTree.write().
In Python having a trace function in effect while mock is imported causes isinstance to be wrong for MagicMocks. This is due to the usage of super() in some class methods, as this sets the __class__ attribute. To avoid this, as a workaround, alias the usage of super .
Omit serialno field from debug hooks on Python memory allocators to
reduce the memory footprint by 5%.
Enable tracemalloc to get the traceback where a memory block has been
allocated when a fatal memory error is logged to decide where to put
a breakpoint.
Compile Python with PYMEM_DEBUG_SERIALNO defined to get back the
field.
This is effectively an un-revert of #11617 and #12024 (reverted in #12159). Portions of those were merged in other PRs (with lower risk) and this represents the remainder. Note that I found 3 different bugs in the original PRs and have fixed them here.
In development mode (-X dev) and in debug build, the io.IOBase
destructor now logs close() exceptions. These exceptions are silent
by default in release mode.
Fix test_sys.test_getallocatedblocks() when tracemalloc is enabled.
If the name of Python memory allocators cannot get read, consider
that pymalloc is disabled.
Fix the following error:
./python -X tracemalloc -m test test_sys -v -m test_getallocatedblocks
ERROR: test_getallocatedblocks (test.test_sys.SysModuleTest)
------------------------------------------------------------
Traceback (most recent call last):
File "Lib/test/test_sys.py", line 770, in test_getallocatedblocks
alloc_name = _testcapi.pymem_getallocatorsname()
RuntimeError: cannot get allocators name
Modify CLEANBYTE, DEADDYTE and FORBIDDENBYTE constants: use 0xCD,
0xDD and 0xFD, rather than 0xCB, 0xBB and 0xFB, to use the same byte
patterns than Windows CRT debug malloc() and free().
Replace _PyMem_IsFreed() function with _PyMem_IsPtrFreed() inline
function. The function is now way more efficient, it became a simple
comparison on integers, rather than a short loop. It detects also
uninitialized bytes and "forbidden bytes" filled by debug hooks
on memory allocators.
Add unit tests on _PyObject_IsFreed().
The random module now prefers the lean internal _sha512 module over hashlib
for seed(version=2) to optimize import time.
Signed-off-by: Christian Heimes <christian@python.org>
Fixes some mistakes and misleadings in the quote function docstring:
- reserved chars are never actually used by quote code, unreserved chars are
- reserved chars were wrong and incomplete
- mentioned that use-case is not minimal quoting wrt. RFC, but cautious quoting
dash_R() function of libregrtest doesn't call support.gc_collect()
directly anymore: it's already called by dash_R_cleanup().
Call dash_R_cleanup() before starting the loop.
Fix reference leak hunting in regrtest: compute also deltas (of
reference count, allocated memory blocks, file descriptor count)
during warmup, to ensure that everything is initialized before
starting to hunt reference leaks.
Other changes:
* Replace gc.collect() with support.gc_collect()
* Move calls to read memory statistics from dash_R_cleanup() to
dash_R()
* Pass regrtest 'ns' to dash_R()
* dash_R() is now more quiet with --quiet option (don't display
progress).
* Precompute the full range for "for it in range(repcount):" to
ensure that the iteration doesn't allocate anything new.
* dash_R() now is responsible to call warm_caches().
While Windows exposes the system processor queue length, the raw value
used for load calculations on Unix systems, it does not provide an API
to access the averaged value. Hence to calculate the load we must track
and average it ourselves. We can't use multiprocessing or a thread to
read it in the background while the tests run since using those would
conflict with test_multiprocessing and test_xxsubprocess.
Thus, we use Window's asynchronous IO API to run the tracker in the
background with it sampling at the correct rate. When we wish to access
the load we check to see if there's new data on the stream, if there is,
we update our load values.
Move all documentation regarding the readinto method into either io.RawIOBase or io.BufferedIOBase.
Corresponding changes to documentation in the _pyio.py module.
It turns out doing socket.listen(0) does not equal to "choose a
reasonable default". It actually means "set backlog to 0".
As such set backlog=None as the default for socket.create_server.
Fixes the following BB failures:
https://github.com/python/cpython/pull/11784#issuecomment-481036369
Ref. BPO-1756, GH-11784.
* Properly handle SyntaxErrors in Python source files.
SyntaxErrors in the target module will rise normally, while SyntaxErrors in dependencies will be added to badmodules. This includes a new regression test.
* Fix name collision bug.
This fixes an issue where a "fromlist" import with the same name as a previously failed import would be incorrectly added to badmodules. This includes a new regression test.
* Replace mutable default values.
Bound empty lists have been replaced with the "if param is None" idiom.
* Replace deprecated imp usage.
Constants imported from imp have been moved to private module-level constants, and ModuleFinder.find_module has been refactored to use importlib. Other than an improvement on how frozen builtin imports are reported (as the frozen imports they are, rather than the stdlib modules they *may* have originated from), these changes maintain complete compatibility with past versions... including odd behavior for returning relative (below current directory, but not a C extension) vs. absolute (above current directory, or a C extension) paths.
Patch by Brandt Bucher.
Deprecated passing the following arguments as keyword arguments:
- "func" in functools.partialmethod(), weakref.finalize(),
profile.Profile.runcall(), cProfile.Profile.runcall(),
bdb.Bdb.runcall(), trace.Trace.runfunc() and
curses.wrapper().
- "function" in unittest.addModuleCleanup() and
unittest.TestCase.addCleanup().
- "fn" in the submit() method of concurrent.futures.ThreadPoolExecutor
and concurrent.futures.ProcessPoolExecutor.
- "callback" in contextlib.ExitStack.callback(),
contextlib.AsyncExitStack.callback() and
contextlib.AsyncExitStack.push_async_callback().
- "c" and "typeid" in the create() method of multiprocessing.managers.Server
and multiprocessing.managers.SharedMemoryServer.
- "obj" in weakref.finalize().
Also allowed to pass arbitrary keyword arguments (even "self" and "func")
if the above arguments are passed as positional argument.
Stop rejecting IPv4 octets with leading zeroes as ambiguously octal.
Plenty of other tools generate decimal IPv4 octets with leading zeroes,
so keeping this check hurts interoperability.
Patch by Joel Croteau.
Return None after calling unittest.mock.patch.object.stop() regardless of whether the object was started. This makes the method idempotent.
https://bugs.python.org/issue36366
bpo-36443, bpo-36202: Since Python 3.7.0, calling Py_DecodeLocale()
before Py_Initialize() produces mojibake if the LC_CTYPE locale is
coerced and/or if the UTF-8 Mode is enabled by the user
configuration. This change fix the issue by disabling LC_CTYPE
coercion and UTF-8 Mode by default. They must now be enabled
explicitly (opt-in) using the new _Py_PreInitialize() API with
_PyPreConfig.
When embedding Python, set coerce_c_locale and utf8_mode attributes
of _PyPreConfig to -1 to enable automatically these parameters
depending on the LC_CTYPE locale, environment variables and command
line arguments
Alternative: Setting Py_UTF8Mode to 1 always explicitly enables the
UTF-8 Mode.
Changes:
* _PyPreConfig_INIT now sets coerce_c_locale and utf8_mode to 0 by
default.
* _Py_InitializeFromArgs() and _Py_InitializeFromWideArgs() can now
be called with config=NULL.
* _PyCoreConfig_Write() now updates _PyRuntime.preconfig
* Remove _PyPreCmdline_Copy()
* _PyPreCmdline_Read() now accepts _PyPreConfig and _PyCoreConfig
optional configurations.
* Rename _PyPreConfig_ReadFromArgv() to _PyPreConfig_Read(). Simplify
the code.
* Calling _PyCoreConfig_Read() no longer adds the warning options
twice: don't add a warning option if it's already in the list.
* Rename _PyCoreConfig_ReadFromArgv() to _PyCoreConfig_Read().
* Rename config_from_cmdline() to _PyCoreConfig_ReadFromArgv().
* Add more assertions on _PyCoreConfig in _PyCoreConfig_Read().
* Move some functions.
* Make some config functions private.
* Add _Py_GetConfigsAsDict() function to get all configurations as a
dict.
* dump_config() of _testembed.c now dumps preconfig as a separated
key: call _Py_GetConfigsAsDict().
* Make _PyMainInterpreterConfig_AsDict() private.
Now that the parser generator is written in Python (Parser/pgen) we can make use of it to regenerate the Lib/keyword file that contains the language keywords instead of parsing the autogenerated grammar files. This also allows checking in the CI that the autogenerated files are up to date.
Abhilash Raj
Pierre Glaser
Victor Stinner
Christian Heimes
Pablo Galindo
Erwan Le Pape
Zackery Spytz
Andrew Svetlov
Terry Jan Reedy
Paul Monson
zlohhcuB treboR
Antoine Pitrou
Jon Janzen
Krzysztof Wojcik
Hervé Beraud
Nicolai Moore
Jens Troeger
Xtreak
Guido van Rossum
Matthias Bussonnier
Jake Tesler
Michael J. Sullivan
Jeroen Demeyer
Olexa Bilaniuk
Anthony Shaw
Rémi Lapeyre
Jason R. Coombs
Julien Palard
Stefan Behnel
Benjamin Peterson
Eric V. Smith
Brian Quinlan
Gregory P. Smith
Michael Blahay
Riccardo Magliocchetti
Romain Picard
Vincent Michel
Łukasz Langa
Serhiy Storchaka
penguindustin
twisteroid ambassador
Inada Naoki
Joannah Nanjekye
gescheit
xdegaye
Victor Stinner
Chris Withers
Petter Strandmark
Thomas A Caswell
Mario Corchero
Steve Dower
Raymond Hettinger
Marco Rougeth
Berker Peksag
Paul Ganssle
Emmanuel Arias
Gordon P. Hemsley
Mark Dickinson
Thomas Moreau
Maximilian Nöthe
jkleint
Windson yang
Steve Dower
Marcin Niemira
Lihua Zhao
Jakub Molinski
pxinwr
Mickaël Schoentgen
Bernt Røskar Brenna
Cheryl Sabella
Eric Snow
Thomas Grainger
Kingsley M
Lorenz Mende
Jörn Hees
Quentin Dawans
Ammar Askar
Steve Palmer
Giampaolo Rodola
Chillar Anand
Michael Felt
Brandt Bucher
MakDon
Matt Houglum
tyomitch
Slam
Thomas Perl
Daniel Hahler
Joel Croteau
Wolfgang Maier
Philipp A
hliu0
Vladimir Surjaninov
Louie Lu