902ab80b59
bpo-30050: Allow disabling full buffer warnings in signal.set_wakeup_fd ( #4792 )
2017-12-17 23:10:18 -05:00
f6f90ff079
bpo-30057: Fix potential missed signal in signal.signal(). ( #4258 )
...
Bug report and patch by Jeroen Demeyer.
2017-11-03 19:58:46 +01:00
ef611c96ea
bpo-30807: signal.setitimer() now uses _PyTime API (GH-3865)
...
The _PyTime API handles detects overflow and is well tested.
Document that the signal will only be sent once if internal is equal
to zero.
2017-10-13 13:49:43 -07:00
a6a4dc816d
bpo-31370: Remove support for threads-less builds ( #3385 )
...
* Remove Setup.config
* Always define WITH_THREAD for compatibility.
2017-09-07 18:56:24 +02:00
2c8a5e4c96
bpo-30808: Use _Py_atomic API for concurrency-sensitive signal state ( #2417 )
...
* Improve signal delivery
Avoid using Py_AddPendingCall from signal handler, to avoid calling signal-unsafe functions.
* Remove unused function
* Improve comments
* Use _Py_atomic API for concurrency-sensitive signal state
* Add blurb
2017-07-17 12:25:19 +02:00
729780a810
bpo-30807: signal.setitimer() may disable the timer by mistake ( #2493 )
...
* bpo-30807: signal.setitimer() may disable the timer by mistake
* Add NEWS blurb
2017-06-30 10:01:05 +02:00
c08177a1cc
bpo-30703: Improve signal delivery ( #2415 )
...
* Improve signal delivery
Avoid using Py_AddPendingCall from signal handler, to avoid calling signal-unsafe functions.
* Remove unused function
* Improve comments
* Add stress test
* Adapt for --without-threads
* Add second stress test
* Add NEWS blurb
* Address comments @haypo
2017-06-28 23:29:29 +02:00
346cbd351e
bpo-16500: Allow registering at-fork handlers ( #1715 )
...
* bpo-16500: Allow registering at-fork handlers
* Address Serhiy's comments
* Add doc for new C API
* Add doc for new Python-facing function
* Add NEWS entry + doc nit
2017-05-27 17:50:54 +02:00
4ae0149697
bpo-30038: fix race condition in signal delivery + wakeup fd ( #1082 )
...
Before, it was possible to get the following sequence of
events (especially on Windows, where the C-level signal handler for
SIGINT is run in a separate thread):
- SIGINT arrives
- trip_signal is called
- trip_signal writes to the wakeup fd
- the main thread wakes up from select()-or-equivalent
- the main thread checks for pending signals, but doesn't see any
- the main thread drains the wakeup fd
- the main thread goes back to sleep
- trip_signal sets is_tripped=1 and calls Py_AddPendingCall to notify
the main thread the it should run the Python-level signal handler
- the main thread doesn't notice because it's asleep
This has been causing repeated failures in the Trio test suite:
https://github.com/python-trio/trio/issues/119
2017-05-16 23:12:11 +02:00
55fe1ae970
bpo-30022: Get rid of using EnvironmentError and IOError (except test… ( #1051 )
2017-04-16 10:46:38 +03:00
aefa7ebf0f
bpo-6532: Make the thread id an unsigned integer. ( #781 )
...
* bpo-6532: Make the thread id an unsigned integer.
From C API side the type of results of PyThread_start_new_thread() and
PyThread_get_thread_ident(), the id parameter of
PyThreadState_SetAsyncExc(), and the thread_id field of PyThreadState
changed from "long" to "unsigned long".
* Restore a check in thread_get_ident().
2017-03-23 14:48:39 +01:00
6a6967e827
Issue #21085 : add configure check for siginfo_t.si_band
...
Patch by Masayuki Yamamoto, reviewed and rebased by Erik Bray.
This is a first step on the long road toward resupporting Cygwin, which does
not provide siginfo_t.si_band.
2016-10-01 00:47:27 -05:00
d508d00919
Issue #28139 : Merge indentation fixes from 3.5 into 3.6
2016-09-17 07:59:14 +00:00
6d57fe1c23
Issue #28139 : Fix messed up indentation
...
Also update the classmethod and staticmethod doc strings and comments to
match the RST documentation.
2016-09-17 03:26:16 +00:00
6782b14bcb
Use PyModule_AddIntMacro() in signal module
...
The signal module was using old-style module initialization with
potential NULL dereferencing.
CID 1295026
2016-09-09 00:11:45 +02:00
940f33a50f
Issue #23524 : Finish removing _PyVerify_fd from sources
2016-09-08 11:21:54 -07:00
ca47063998
replace Py_(u)intptr_t with the c99 standard types
2016-09-06 13:47:26 -07:00
1a2b24f02d
Issue #27332 : Fixed the type of the first argument of module-level functions
...
generated by Argument Clinic. Patch by Petr Viktorin.
2016-07-07 17:35:15 +03:00
57a01d3a0e
Issue #26200 : Added Py_SETREF and replaced Py_XSETREF with Py_SETREF
...
in places where Py_DECREF was used.
2016-04-10 18:05:40 +03:00
48842714b9
Issue #22570 : Renamed Py_SETREF to Py_XSETREF.
2016-04-06 09:45:48 +03:00
5a57ade58e
Issue #20440 : Massive replacing unsafe attribute setting code with special
...
macro Py_SETREF.
2015-12-24 10:35:59 +02:00
6b680cd6b2
Fixed compilation error in signalmodule.c (issue #20182 ).
2015-05-16 15:57:56 +03:00
c7027b7904
Issue #20182 : converted the signal module to use Argument Clinic
2015-05-16 14:14:49 +03:00
e72fe3995b
Issue #23836 : Use _Py_write_noraise() to retry on EINTR in trip_signal() of
...
signalmodule.c
2015-04-01 18:35:22 +02:00
6aa446cf03
PEP 475: on EINTR, retry the function even if the timeout is equals to zero
...
Retry:
* signal.sigtimedwait()
* threading.Lock.acquire()
* threading.RLock.acquire()
* time.sleep()
2015-03-30 21:33:51 +02:00
e134a7fe36
Issue #23752 : _Py_fstat() is now responsible to raise the Python exception
...
Add _Py_fstat_noraise() function when a Python exception is not welcome.
2015-03-30 10:09:31 +02:00
869e1778c0
Issue #22117 : Replace usage of _PyTime_ROUND_UP with _PyTime_ROUND_CEILING
...
All these functions only accept positive timeouts, so this change has no effect
in practice.
2015-03-30 03:49:14 +02:00
34dc0f46ae
Issue #22117 : The signal modules uses the new _PyTime_t API
...
* Add _PyTime_AsTimespec()
* Add unit tests for _PyTime_AsTimespec()
2015-03-27 18:19:03 +01:00
a453cd8d85
Issue #23715 : signal.sigwaitinfo() and signal.sigtimedwait() are now retried
...
when interrupted by a signal not in the *sigset* parameter, if the signal
handler does not raise an exception. signal.sigtimedwait() recomputes the
timeout with a monotonic clock when it is retried.
Remove test_signal.test_sigwaitinfo_interrupted() because sigwaitinfo() doesn't
raise InterruptedError anymore if it is interrupted by a signal not in its
sigset parameter.
2015-03-20 12:54:28 +01:00
8acde7dcce
Issue #23524 : Change back to using Windows errors for _Py_fstat instead of the errno shim.
2015-03-07 18:14:07 -08:00
f2f373f593
Issue #23152 : Implement _Py_fstat() to support files larger than 2 GB on Windows.
...
fstat() may fail with EOVERFLOW on files larger than 2 GB because the file size type is an signed 32-bit integer.
2015-02-21 08:44:05 -08:00
cf40a9e640
Issue #23450 : Fix signal.set_wakeup_fd() on Windows
...
Detect integer overflow on the file descriptor of the socket on 64-bit Python.
2015-02-12 16:34:54 +01:00
d600951748
Issue #22869 : Split pythonrun into two modules
...
- interpreter startup and shutdown code moved to a new
pylifecycle.c module
- Py_OptimizeFlag moved into the new module with the other
global flags
2014-11-20 21:39:37 +10:00
3822760f2d
Issue #22042 : signal.set_wakeup_fd(fd) now raises an exception if the file
...
descriptor is in blocking mode.
2014-08-27 12:59:44 +02:00
115171086a
Issue #22018 : On Windows, signal.set_wakeup_fd() now also supports sockets.
...
A side effect is that Python depends to the WinSock library.
2014-07-29 23:31:34 +02:00
1d8948e023
Backout 42ced0d023cd: oops, i didn't want to push this changeset :-/
2014-07-24 22:51:05 +02:00
d18ccd19f0
tets
2014-07-24 21:58:53 +02:00
0bffc94d57
Issue #22018 : signal.set_wakeup_fd() now raises an OSError instead of a
...
ValueError on fstat() failure.
2014-07-21 16:28:54 +02:00
815a6f38a6
merge along w/ fix for issue #2107 (commit c9239171e429)
2014-04-04 10:20:28 -04:00
e09fb7198a
fix #21076 : turn signal module constants into enums
2014-04-04 15:34:17 +02:00
3c1b379ebd
Issue #20320 : select.select() and select.kqueue.control() now round the timeout
...
aways from zero, instead of rounding towards zero.
It should make test_asyncio more reliable, especially test_timeout_rounding() test.
2014-02-17 00:02:43 +01:00
dfe98a102e
Issue #20437 : Fixed 22 potential bugs when deleting objects references.
2014-02-09 13:46:20 +02:00
505ff755d7
Issue #20437 : Fixed 21 potential bugs when deleting objects references.
2014-02-09 13:33:53 +02:00
44ed3de6f4
Issue #18774 : Remove last bits of GNU PTH thread code, patch by Vajrasky Kok.
2013-08-18 12:43:24 +02:00
6f6ec37838
Issue #16105 : When a signal handler fails to write to the file descriptor registered with ``signal.set_wakeup_fd()``, report an exception instead of ignoring the error.
2013-08-17 20:27:56 +02:00
1c8f059019
Issue #18520 : Add a new PyStructSequence_InitType2() function, same than
...
PyStructSequence_InitType() except that it has a return value (0 on success,
-1 on error).
* PyStructSequence_InitType2() now raises MemoryError on memory allocation failure
* Fix also some calls to PyDict_SetItemString(): handle error
2013-07-22 22:24:54 +02:00
52c5f85cf9
Issue #14173 : Avoid crashing when reading a signal handler during interpreter shutdown.
2013-05-04 23:21:09 +02:00
c8c952ce2a
Issue #14173 : Avoid crashing when reading a signal handler during interpreter shutdown.
2013-05-04 23:16:59 +02:00
245bbee0d5
Merge.
2013-04-17 21:24:58 +01:00
cf8a1e51ec
- Issue #17782 : Fix undefined behaviour on platforms where ``struct timespec``'s "tv_nsec" member is not a C long.
2013-04-17 22:06:44 +02:00
Nathaniel J. Smith
Antoine Pitrou
Victor Stinner
Serhiy Storchaka
Zachary Ware
Martin Panter
Christian Heimes
Steve Dower
Benjamin Peterson
Tal Einat
Nick Coghlan
Brett Cannon
Giampaolo Rodola'
Christian Heimes
Antoine Pitrou
Richard Oudkerk