This fixes the problem on Windows - that's the only system where I can
test it.
It leaves sys.argv alone and only changes sys.path[0] to an absolute
pathname.
sys.getwindowsversion() on Windows (new enahanced Tim-proof <wink>
version), and fix test_pep277.py in a few minor ways.
Including doc and NEWS entries.
globals, _Py_Ticker and _Py_CheckInterval. This also implements Jeremy's
shortcut in Py_AddPendingCall that zeroes out _Py_Ticker. This allows the
test in the main loop to only test a single value.
The gory details are at
http://python.org/sf/602191
that have taken me "too long" to reverse-engineer over the years.
Vastly reduced the nesting level and redundancy of #ifdef-ery.
Took a light stab at repairing comments that are no longer true.
sys_gettotalrefcount(): Changed to enable under Py_REF_DEBUG.
It was enabled under Py_TRACE_REFS, which was much heavier than
necessary. sys.gettotalrefcount() is now available in a
Py_REF_DEBUG-only build.
use wrappers on all platforms, to make this as consistent as possible x-
platform (in particular, make sure there's at least one \0 byte in
the output buffer). Also document more of the truth about what these do.
getargs.c, seterror(): Three computations of remaining buffer size were
backwards, thus telling PyOS_snprintf the buffer is larger than it
actually is. This matters a lot now that PyOS_snprintf ensures there's a
trailing \0 byte (because it didn't get the truth about the buffer size,
it was storing \0 beyond the true end of the buffer).
sysmodule.c, mywrite(): Simplify, now that PyOS_vsnprintf guarantees to
produce a \0 byte.
If it returns -1 (which indicates overflow on old Linux platforms and
perhaps on Windows) or size greater than buffer, write a message
indicating that the previous message was truncated.
The profiler does not need to know anything about the exception state,
so we no longer call it when an exception is raised. We do, however,
make sure we *always* call the profiler when we exit a frame. This
ensures that timing events are more easily isolated by a profiler and
finally clauses that do a lot of work don't have their time
mis-allocated.
When an exception is propogated out of the frame, the C callback for
the profiler now receives a PyTrace_RETURN event with an arg of NULL;
the Python-level profile hook function will see a 'return' event with
an arg of None. This means that from Python it is impossible for the
profiler to determine if the frame exited with an exception or if it
returned None, but this doesn't matter for profiling. A C-based
profiler could tell the difference, but this doesn't seem important.
ceval.c:eval_frame(): Simplify the code in two places so that the
profiler is called for every exit from a frame
and not for exceptions.
sysmodule.c:profile_trampoline(): Make sure we don't expose Python
code to NULL; use None instead.
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
Python interpreter.
This change adds two new C-level APIs: PyEval_SetProfile() and
PyEval_SetTrace(). These can be used to install profile and trace
functions implemented in C, which can operate at much higher speeds
than Python-based functions. The overhead for calling a C-based
profile function is a very small fraction of a percent of the overhead
involved in calling a Python-based function.
The machinery required to call a Python-based profile or trace
function been moved to sysmodule.c, where sys.setprofile() and
sys.setprofile() simply become users of the new interface.
As a side effect, SF bug #436058 is fixed; there is no longer a
_PyTrace_Init() function to declare.
Implement sys.maxunicode.
Explicitly wrap around upper/lower computations for wide Py_UNICODE.
When decoding large characters with UTF-8, represent expected test
results using the \U notation.
and trace functions lazily, which incurs extra argument pushing and checks
in the C overhead for profiling/tracing, create the strings semi-lazily
when the Python code first registers a profile or trace function. This
simplifies the trampoline into the profile/trace functions.
Update docstring and library reference section on 'sys' module.
New API PyErr_Display, just for displaying errors, called by excepthook.
Uncaught exceptions now call sys.excepthook; if that fails, we fall back
to calling PyErr_Display directly.
Also comes with sys.__excepthook__ and sys.__displayhook__.
re-initializing Python (Py_Finalize() followed by Py_Initialize()) to
blow up quickly. With the DECREF removed I can't get it to fail any
more. (Except it still leaks, but that's probably a separate issue.)
ceval.c:
define recurion_limit (static), default value is 2500
define Py_GetRecursionLimit and Py_SetRecursionLimit
raise RuntimeError if limit is exceeded
PC/config.h:
remove plat-specific definition
sysmodule.c:
add sys.(get|set)recursionlimit
string literals has not been tested on an MS_WIN16 platform; the trailing
";" was inside the #ifndef MS_WIN16, which should cause an error (missing
semi-colon) when compiled with that symbol #defined.
for systems that are missing those declarations from system include files.
Start by moving a pointy-haired ones from their previous locations to the
new section.
(The gethostname() one, for instance, breaks on several systems, because
some define it as (char *, size_t) and some as (char *, int).)
I purposely decided not to include the summary of used #defines like Tim did
in the first section of pyport.h. In my opinion, the number of #defines
likedly to be used by this section would make such an overview unwieldy. I
would suggest documenting the non-obvious ones, though.
In other words, hex(sys.hexversion) == 0x010502b2 for Python 1.5.2b2.
This is derived from the new variable PY_VERSION_HEX defined in patchlevel.h.
(Cute, eh?)
Adapted from code submitted by Just van Rossum.
PySys_WriteStdout(format, ...)
PySys_WriteStderr(format, ...)
The first function writes to sys.stdout; the second to sys.stderr. When
there is a problem, they write to the real (C level) stdout or stderr;
no exceptions are raised (but a pending exception may be cleared when a
new exception is caught).
Both take a printf-style format string as their first argument followed
by a variable length argument list determined by the format string.
*** WARNING ***
The format should limit the total size of the formatted output string to
1000 bytes. In particular, this means that no unrestricted "%s" formats
should occur; these should be limited using "%.<N>s where <N> is a
decimal number calculated so that <N> plus the maximum size of other
formatted text does not exceed 1000 bytes. Also watch out for "%f",
which can print hundreds of digits for very large numbers.
dirname in sys.path. This means that you can create a symbolic link
foo in /usr/local/bin pointing to /usr/yourname/src/foo/foo.py, and
then invoking foo will insert /usr/yourname/src/foo in sys.path, not
/usr/local/bin. This makes it easier to have multifile programs
(before, the program would have to do an os.readlink(sys.argv[0])
itself and insert the resulting directory in sys.path -- Grail does
this).
Note that the expansion is only used for sys.path; sys.argv[0] is
still the original, unadorned filename (/usr/local/bin/foo in the
example).
directory containing argv[0] is inserted in front of sys.path.
If argv[0] contains no directory, an empty string is inserted.
If argv is empty, nothing happens.
getcounts() returns a list of counts of allocations and
deallocations for all different object types.
getobjects(n [, type ]) returns a list of recently allocated
and not-yet-freed objects of the given type (all
objects if no type given). Only the n most recent
(all if n==0) objects are returned.
getcounts is only available if compiled with -DCOUNT_ALLOCS,
getobjects is only available if compiled with -DTRACE_REFS. Note that
everything must be compiled with these options!
bltinmodule.c: fixed coerce() nightmare in ternary pow().
modsupport.c (initmodule2): pass METH_FREENAME flag to newmethodobject().
pythonrun.c: move flushline() into and around print_error().
* various modules: added 1993 to copyright.
* thread.c: added copyright notice.
* ceval.c: minor change to error message for "+"
* stdwinmodule.c: check for error from wfetchcolor
* config.c: MS-DOS fixes (define PYTHONPATH, use DELIM, use osdefs.h)
* Add declaration of inittab to import.h
* sysmodule.c: added sys.builtin_module_names
* xxmodule.c, xxobject.c: fix minor errors
sys.stderr or sys.stdin, and to work with any object as long as it has
a write() (respectively readline()) methods. Some functions that took
a FILE* argument now take an object* argument.
arguments crashed in INCREF() calls which should be XINCREF() calls.
timemodule.c: fix for SEQUENT port (sys/select, struct timezone) by
Jaap Vermeulen
xxobject.c: include modsupport.h
Thomas Heller
Mark Hammond
Skip Montanaro
Tim Peters
Martin v. Löwis
Jack Jansen
Fred Drake
Neal Norwitz
Neil Schemenauer
Jeremy Hylton
Moshe Zadka
Guido van Rossum
Ka-Ping Yee
Greg Stein
Barry Warsaw
Thomas Wouters
Marc-André Lemburg
Sjoerd Mullender