* Initialize _PyPreConfig.dev_mode to -1.
* _PyPreConfig_Read(): coreconfig has the priority over preconfig.
* _PyCoreConfig_Read() now calls _PyPreCmdline_Read() internally.
* config_from_cmdline() now pass _PyPreCmdline to config_read().
* Add _PyPreCmdline_Copy().
Prepare code to move some _PyPreConfig parameters into _PyPreCmdline.
Changes:
* _PyCoreConfig_ReadFromArgv(): remove preconfig parameter,
use _PyRuntime.preconfig.
* Add _PyPreCmdline_GetPreConfig() (called by _PyPreConfig_Read()).
* Rename _PyPreCmdline_Init() to _PyPreCmdline_SetArgv()
* Factorize _Py_PreInitializeFromPreConfig() code: add
pyinit_preinit().
* _PyPreConfig_Read() now sets coerce_c_locale to 2 if it must be
coerced.
* Remove _PyCoreConfig_ReadPreConfig().
* _PyCoreConfig_Write() now copies updated preconfig into _PyRuntime.
* Add _PyRuntime.pre_initialized: set to 1 when Python
is pre-initialized
* Add _Py_PreInitialize() and _Py_PreInitializeFromPreConfig().
* _PyCoreConfig_Read() now calls _Py_PreInitialize().
* Move _PyPreConfig_GetGlobalConfig() and
_PyCoreConfig_GetGlobalConfig() calls from main.c to preconfig.c
and coreconfig.c.
Calling _PyRuntime_Initialize() after _PyRuntime_Finalize() now re-initializes
_PyRuntime structure. Previously, _PyRuntime_Initialize() did
nothing in that case.
* _PyPreConfig_Read() now sets temporarily LC_CTYPE to the user
preferred locale, as _PyPreConfig_Write() will do permanentely.
* Fix _PyCoreConfig_Clear(): clear run_xxx attributes
* _Py_SetArgcArgv() doesn't have to be exported
* _PyCoreConfig_SetGlobalConfig() no longer applies preconfig
* _PyPreConfig_Write() now reallocates the pre-configuration with the
new memory allocator.
* It is no longer needed to force the "default raw memory allocator"
to clear pre-configuration and core configuration. Simplify the
code.
* _PyPreConfig_Write() now does nothing if called after
Py_Initialize(): no longer check if the allocator is the same.
* Remove _PyMem_GetDebugAllocatorsName(): dev mode sets again
allocator to "debug".
* _PyPreConfig_Write() now sets the memory allocator.
* _PyPreConfig_Write() gets a return type: _PyInitError.
* _Py_InitializeCore() now reads and writes the pre-configuration
(set the memory allocator, configure the locale) before reading and
writing the core configuration.
* Move 'allocator' and 'dev_mode' fields from _PyCoreConfig
to _PyPreConfig.
* Fix InitConfigTests of test_embed: dev_mode sets allocator to
"debug", add a new tests for env vars with dev mode enabled.
* Move following fields from _PyCoreConfig to _PyPreConfig:
* coerce_c_locale
* coerce_c_locale_warn
* legacy_windows_stdio
* utf8_mode
* _PyPreConfig_ReadFromArgv() is now responsible to choose the
filesystem encoding
* _PyPreConfig_Write() now sets the LC_CTYPE locale
* Revert "bpo-36097: Use only public C-API in the_xxsubinterpreters module (adding as necessary). (#12003)"
This reverts commit bcfa450f21.
* Revert "bpo-33608: Simplify ceval's DISPATCH by hoisting eval_breaker ahead of time. (gh-12062)"
This reverts commit bda918bf65.
* Revert "bpo-33608: Use _Py_AddPendingCall() in _PyCrossInterpreterData_Release(). (gh-12024)"
This reverts commit b05b711a2c.
* Revert "bpo-33608: Factor out a private, per-interpreter _Py_AddPendingCall(). (GH-11617)"
This reverts commit ef4ac967e2.
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
* bpo-1054041: Exit properly by a signal after a ^C.
An uncaught KeyboardInterrupt exception means the user pressed ^C and
our code did not handle it. Programs that install SIGINT handlers are
supposed to reraise the SIGINT signal to the SIG_DFL handler in order
to exit in a manner that their calling process can detect that they
died due to a Ctrl-C. https://www.cons.org/cracauer/sigint.html
After this change on POSIX systems
while true; do python -c 'import time; time.sleep(23)'; done
can be stopped via a simple Ctrl-C instead of the shell infinitely
restarting a new python process.
What to do on Windows, or if anything needs to be done there has not
yet been determined. That belongs in its own PR.
TODO(gpshead): A unittest for this behavior is still needed.
* Do the unhandled ^C check after pymain_free.
* Return STATUS_CONTROL_C_EXIT on Windows.
* Fix ifdef around unistd.h include.
* 📜🤖 Added by blurb_it.
* Add STATUS_CTRL_C_EXIT to the os module on Windows
* Add unittests.
* Don't send CTRL_C_EVENT in the Windows test.
It was causing CI systems to bail out of the entire test suite.
See https://dev.azure.com/Python/cpython/_build/results?buildId=37980
for example.
* Correct posix test (fail on macOS?) check.
* STATUS_CONTROL_C_EXIT must be unsigned.
* Improve the error message.
* test typo :)
* Skip if the bash version is too old.
...and rename the windows test to reflect what it does.
* min bash version is 4.4, detect no bash.
* restore a blank line i didn't mean to delete.
* PyErr_Occurred() before the Py_DECREF(co);
* Don't add os.STATUS_CONTROL_C_EXIT as a constant.
* Update the Windows test comment.
* Refactor common logic into a run_eval_code_obj fn.
* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
Py_FatalError().
* Misc code cleanup
* The PyByteArray_Init() and PyByteArray_Fini() functions have been
removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
excluded from the limited API (stable ABI), and were not
documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
Include/cpython/pylifecycle.h to
Include/internal/pycore_pylifecycle.h. Replace
"PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
when done. Rewrite macros to make them look more like statement:
add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
calling Py_FatalError().
bpo-34523, bpo-35290: C locale coercion now resets the Python
internal "force ASCII" mode. This change fix the filesystem encoding
on FreeBSD CURRENT, which has a new "C.UTF-8" locale, when
the UTF-8 mode is disabled.
Add _Py_ResetForceASCII(): _Py_SetLocaleFromEnv() now calls it.
* The _PySys_EndInit() function now copies the
config->module_search_path list, so config is longer modified when
sys.path is updated.
* config->warnoptions list and config->xoptions dict are also copied
* test_embed: InitConfigTests now also tests
main_config['module_search_path']
* Fix _Py_InitializeMainInterpreter(): don't use config->warnoptions
but sys.warnoptions to decide if the warnings module should
be imported at startup.
* ast.h now includes Python-ast.h and node.h
* parsetok.h now includes node.h and grammar.h
* symtable.h now includes Python-ast.h
* Modify asdl_c.py to enhance Python-ast.h:
* Add #ifndef/#define Py_PYTHON_AST_H to be able to include the header
twice
* Add "extern { ... }" for C++
* Undefine "Yield" macro conflicting with winbase.h
* Remove "#undef Yield" from C files, it's now done in Python-ast.h
* Remove now useless includes in C files
* And pycore_lifecycle.h and pycore_pathconfig.h headers to
Include/internal/
* Move Py_BUILD_CORE specific code from coreconfig.h and
pylifecycle.h to pycore_pathconfig.h and pycore_lifecycle.h
* Move _Py_wstrlist_XXX() definitions and _PyPathConfig code
from pycore_state.h to pycore_pathconfig.h
* Move "Init" and "Fini" function definitions from pylifecycle.c to
pycore_lifecycle.h.
If Py_BUILD_CORE is defined, the PyThreadState_GET() macro access
_PyRuntime which comes from the internal pycore_state.h header.
Public headers must not require internal headers.
Move PyThreadState_GET() and _PyInterpreterState_GET_UNSAFE() from
Include/pystate.h to Include/internal/pycore_state.h, and rename
PyThreadState_GET() to _PyThreadState_GET() there.
The PyThreadState_GET() macro of pystate.h is now redefined when
pycore_state.h is included, to use the fast _PyThreadState_GET().
Changes:
* Add _PyThreadState_GET() macro
* Replace "PyThreadState_GET()->interp" with
_PyInterpreterState_GET_UNSAFE()
* Replace PyThreadState_GET() with _PyThreadState_GET() in internal C
files (compiled with Py_BUILD_CORE defined), but keep
PyThreadState_GET() in the public header files.
* _testcapimodule.c: replace PyThreadState_GET() with
PyThreadState_Get(); the module is not compiled with Py_BUILD_CORE
defined.
* pycore_state.h now requires Py_BUILD_CORE to be defined.
Don't call _Py_FatalError_PrintExc() nor flush_std_files() if the
current thread doesn't hold the GIL, or if the current thread
has no Python state thread.
Configuring python with ./configure --with-pydebug CFLAGS="-D COUNT_ALLOCS -O0"
makes "make smelly" fail as some symbols were being exported without the "Py_" or
"_Py" prefixes.
* Revert "bpo-34589: Add -X coerce_c_locale command line option (GH-9378)"
This reverts commit dbdee0073c.
* Revert "bpo-34589: C locale coercion off by default (GH-9073)"
This reverts commit 7a0791b699.
* Revert "bpo-34589: Make _PyCoreConfig.coerce_c_locale private (GH-9371)"
This reverts commit 188ebfa475.
_PyCoreConfig:
* Rename coerce_c_locale to _coerce_c_locale
* Rename coerce_c_locale_warn to _coerce_c_locale_warn
These fields are now private (name prefixed by "_").
GCC complains:
Python/pylifecycle.c: In function ‘_Py_InitializeFromConfig’:
Python/pylifecycle.c:900:13: warning: ‘interp’ may be used uninitialized in this function [-Wmaybe-uninitialized]
err = _Py_InitializeMainInterpreter(interp, &main_config);
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This seems spurious since &interp is passed to _Py_InitializeCore. Anyway, we
can easily initialize to quiet the warning.
Use the core configuration of the interpreter, rather
than using global configuration variables. For example, replace
Py_QuietFlag with core_config->quiet.
_PyCoreConfig_Read() is now responsible to choose the filesystem
encoding and error handler. Using Py_Main(), the encoding is now
chosen even before calling Py_Initialize().
_PyCoreConfig.filesystem_encoding is now the reference, instead of
Py_FileSystemDefaultEncoding, for the Python filesystem encoding.
Changes:
* Add filesystem_encoding and filesystem_errors to _PyCoreConfig
* _PyCoreConfig_Read() now reads the locale encoding for the file
system encoding.
* PyUnicode_EncodeFSDefault() and PyUnicode_DecodeFSDefaultAndSize()
now use the interpreter configuration rather than
Py_FileSystemDefaultEncoding and Py_FileSystemDefaultEncodeErrors
global configuration variables.
* Add _Py_SetFileSystemEncoding() and _Py_ClearFileSystemEncoding()
private functions to only modify Py_FileSystemDefaultEncoding and
Py_FileSystemDefaultEncodeErrors in coreconfig.c.
* _Py_CoerceLegacyLocale() now takes an int rather than
_PyCoreConfig for the warning.
On Windows, the LC_CTYPE is now set to the user preferred locale at
startup: _Py_SetLocaleFromEnv(LC_CTYPE) is now called during the
Python initialization. Previously, the LC_CTYPE locale was "C" at
startup, but changed when calling setlocale(LC_CTYPE, "") or
setlocale(LC_ALL, "").
pymain_read_conf() now also calls _Py_SetLocaleFromEnv(LC_CTYPE) to
behave as _Py_InitializeCore(). Moreover, it doesn't save/restore the
LC_ALL anymore.
On Windows, standard streams like sys.stdout now always use
surrogateescape error handler by default (ignore the locale).
Standard streams like sys.stdout now use the "surrogateescape" error
handler, instead of "strict", on the POSIX locale (when the C locale is not
coerced and the UTF-8 Mode is disabled).
Add tests on sys.stdout.errors with LC_ALL=POSIX.
* _Py_InitializeCore() now sets the LC_CTYPE locale to the user
preferred locale before checking if the C locale should be coerced
or not in _PyCoreConfig_Read().
* Fix pymain_read_conf(): remember if the C locale has been coerced
when the configuration should be read again if the encoding has
changed.
Python now gets the locale encoding with C code to initialize the encoding
of standard streams like sys.stdout. Moreover, the encoding is now
initialized to the Python codec name to get a normalized encoding name and
to ensure that the codec is loaded. The change avoids importing
_bootlocale and _locale modules at startup by default.
When the PYTHONIOENCODING environment variable only contains an encoding,
the error handler is now is now set explicitly to "strict".
Rename also get_default_standard_stream_error_handler() to
get_stdio_errors().
Reduce the buffer to format the "cpXXX" string (Windows locale encoding).
On HP-UX with C or POSIX locale, sys.getfilesystemencoding() now returns
"ascii" instead of "roman8" (when the UTF-8 Mode is disabled and the C locale
is not coerced).
nl_langinfo(CODESET) announces "roman8" whereas it uses the Latin1
encoding in practice.
* Add Include/coreconfig.h
* Move config_*() and _PyCoreConfig_*() functions from Modules/main.c
to a new Python/coreconfig.c file.
* Inline _Py_ReadHashSeed() into config_init_hash_seed()
* Move global configuration variables to coreconfig.c
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Py_Main() can again be called after Py_Initialize(), as in Python
3.6. The new configuration is ignored, except of
_PyMainInterpreterConfig.argv which is used to update sys.argv.
External importers were being added in both phases of the import
system initialisation.
They're only supposed to be added in the second phase, after the
import machinery has been appropriately configured.
* _Py_InitializeCore() doesn't call _PyMem_SetupAllocators() anymore
if the PYTHONMALLOC environment variable is not set.
* pymain_cmdline() now sets the allocator to the default, instead of
setting the allocator in subfunctions.
* Py_SetStandardStreamEncoding() now calls
_PyMem_SetDefaultAllocator() to get a known allocator, to be able
to release the memory with the same allocator.
* Add _PyCoreConfig.install_signal_handlers
* Remove _PyMain.config: _PyMainInterpreterConfig usage is now
restricted to pymain_init_python_main().
* Rename _PyMain.core_config to _PyMain.config
* _PyMainInterpreterConfig_Read() now creates the xoptions dictionary
from the core config
* Fix _PyMainInterpreterConfig_Read(): don't replace xoptions and
argv if they are already set.
Merge _PyCoreConfig_ReadEnv() into _PyCoreConfig_Read(), and
_Py_CommandLineDetails usage is now restricted to pymain_cmdline().
Changes:
* _PyCoreConfig: Add nxoption, xoptions, nwarnoption and warnoptions
* Add _PyCoreConfig.program: argv[0] or ""
* Move filename, command, module and xoptions from
_Py_CommandLineDetails to _PyMain. xoptions _Py_OptList becomes
(int, wchar_t**) list.
* Add pymain_cmdline() function
* Rename copy_argv() to copy_wstrlist(). Rename clear_argv() to
clear_wstrlist(). Remove _Py_OptList structure: use (int,
wchar_t**) list instead.
* Rename pymain_set_flag_from_env() to pymain_get_env_flag()
* Rename pymain_set_flags_from_env() to pymain_get_env_flags()
* _PyMainInterpreterConfig_Read() now creates the warnoptions from
_PyCoreConfig.warnoptions
* Inline pymain_add_warning_dev_mode() and
pymain_add_warning_bytes_flag() into config_init_warnoptions()
* Inline pymain_get_program_name() into _PyCoreConfig_Read()
* _Py_CommandLineDetails: Replace warning_options with nwarnoption
and warnoptions. Replace env_warning_options with nenv_warnoption
and env_warnoptions.
* pymain_warnings_envvar() now has a single implementation for
Windows and Unix: use config_get_env_var_dup() to also get the
variable as wchar_t* on Unix.
* Reorganize pymain_main() to make the code more flat
* Clear configurations before pymain_update_sys_path()
* Mark Py_FatalError() and _Py_FatalInitError() with _Py_NO_RETURN
* Replace _PyMain.run_code variable with a new RUN_CODE() macro
* Move _PyMain.cf into a local variable in pymain_run_python()
Fix compiler warnings in Py_FinalizeEx(): only define variables if
they are needed, add #ifdef.
Other cleanup changes:
* _PyWarnings_InitWithConfig() is no more needed: call
_PyWarnings_Init() instead.
* Inline pymain_init_main_interpreter() in its caller. This
subfunction is no more justifed.
bpo-29240, bpo-32030: If the encoding change (C locale coerced or
UTF-8 Mode changed), Py_Main() now reads again the configuration with
the new encoding.
Changes:
* Add _Py_UnixMain() called by main().
* Rename pymain_free_pymain() to pymain_clear_pymain(), it can now be
called multipled times.
* Rename pymain_parse_cmdline_envvars() to pymain_read_conf().
* Py_Main() now clears orig_argc and orig_argv at exit.
* Remove argv_copy2, Py_Main() doesn't modify argv anymore. There is
no need anymore to get two copies of the wchar_t** argv.
* _PyCoreConfig: add coerce_c_locale and coerce_c_locale_warn.
* Py_UTF8Mode is now initialized to -1.
* Locale coercion (PEP 538) now respects -I and -E options.
Each interpreter now has its core_config and main_config copy:
* Add _PyCoreConfig_Copy() and _PyMainInterpreterConfig_Copy()
* Move _PyCoreConfig_Read(), _PyCoreConfig_Clear() and
_PyMainInterpreterConfig_Clear() from Python/pylifecycle.c to
Modules/main.c
* Fix _Py_InitializeEx_Private(): call _PyCoreConfig_ReadEnv() before
_Py_InitializeCore()
_PyMainInterpreterConfig now contains Python objects, whereas
_PyCoreConfig contains wchar_t* strings.
Core config:
* Rename _PyMainInterpreterConfig_ReadEnv() to _PyCoreConfig_ReadEnv()
* Move 3 strings from _PyMainInterpreterConfig to _PyCoreConfig:
module_search_path_env, home, program_name.
* Add _PyCoreConfig_Clear()
* _PyPathConfig_Calculate() now takes core config rather than main
config
* _PyMainInterpreterConfig_Read() now requires also a core config
Main config:
* Add _PyMainInterpreterConfig.module_search_path: sys.path list
* Add _PyMainInterpreterConfig.argv: sys.argv list
* _PyMainInterpreterConfig_Read() now computes module_search_path
* Add -X utf8 command line option, PYTHONUTF8 environment variable
and a new sys.flags.utf8_mode flag.
* If the LC_CTYPE locale is "C" at startup: enable automatically the
UTF-8 mode.
* Add _winapi.GetACP(). encodings._alias_mbcs() now calls
_winapi.GetACP() to get the ANSI code page
* locale.getpreferredencoding() now returns 'UTF-8' in the UTF-8
mode. As a side effect, open() now uses the UTF-8 encoding by
default in this mode.
* Py_DecodeLocale() and Py_EncodeLocale() now use the UTF-8 encoding
in the UTF-8 Mode.
* Update subprocess._args_from_interpreter_flags() to handle -X utf8
* Skip some tests relying on the current locale if the UTF-8 mode is
enabled.
* Add test_utf8mode.py.
* _Py_DecodeUTF8_surrogateescape() gets a new optional parameter to
return also the length (number of wide characters).
* pymain_get_global_config() and pymain_set_global_config() now
always copy flag values, rather than only copying if the new value
is greater than the old value.
* Py_Main() now starts by reading Py_xxx configuration variables to
only work on its own private structure, and then later writes back
the configuration into these variables.
* Replace Py_GETENV() with pymain_get_env_var() which ignores empty
variables.
* Add _PyCoreConfig.dump_refs
* Add _PyCoreConfig.malloc_stats
* _PyObject_DebugMallocStats() is now responsible to check if debug
hooks are installed. The function returns 1 if stats were written,
or 0 if the hooks are disabled. Mark _PyMem_PymallocEnabled() as
static.
* Simplify _PyCoreConfig_INIT, _PyMainInterpreterConfig_INIT,
_PyPathConfig_INIT macros: no need to set fields to 0/NULL, it's
redundant (the C language sets them to 0/NULL for us).
* Fix typo: pymain_run_statup() => pymain_run_startup()
* Remove a few XXX/TODO
_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Changes:
* _PyPathConfig_Fini() cannot be called in Py_FinalizeEx().
Py_Initialize() and Py_Finalize() can be called multiple times, but
it must not "forget" parameters set by Py_SetProgramName(),
Py_SetPath() or Py_SetPythonHome(), whereas _PyPathConfig_Fini()
clear all these parameters.
* config_get_program_name() and calculate_program_full_path() now
also decode paths using Py_DecodeLocale() to use the
surrogateescape error handler, rather than decoding using
mbstowcs() which is strict.
* Change _Py_CheckPython3() prototype: () => (void)
* Truncate a few lines which were too long
_Py_InitializeEx_Private() now calls
_PyMainInterpreterConfig_ReadEnv() to read environment variables
PYTHONHOME and PYTHONPATH, and set the program name.
* Fix _PyMem_SetupAllocators("debug"): always restore allocators to
the defaults, rather than only caling _PyMem_SetupDebugHooks().
* Add _PyMem_SetDefaultAllocator() helper to set the "default"
allocator.
* Add _PyMem_GetAllocatorsName(): get the name of the allocators
* main() now uses debug hooks on memory allocators if Py_DEBUG is
defined, rather than calling directly malloc()
* Document default memory allocators in C API documentation
* _Py_InitializeCore() now fails with a fatal user error if
PYTHONMALLOC value is an unknown memory allocator, instead of
failing with a fatal internal error.
* Add new tests on the PYTHONMALLOC environment variable
* Add support.with_pymalloc()
* Add the _testcapi.WITH_PYMALLOC constant and expose it as
support.with_pymalloc().
* sysconfig.get_config_var('WITH_PYMALLOC') doesn't work on Windows, so
replace it with support.with_pymalloc().
* pythoninfo: add _testcapi collector for pymem
clang can't figure out that fatal_error is noreturn itself and emits warnings:
../cpython/Python/pylifecycle.c:2116:1: warning: function declared 'noreturn' should not return [-Winvalid-noreturn]
}
^
../cpython/Python/pylifecycle.c:2125:1: warning: function declared 'noreturn' should not return [-Winvalid-noreturn]
}
^
* Py_Main() now calls Py_SetProgramName() earlier to be able to get
the program name in _PyMainInterpreterConfig_ReadEnv().
* Rename prog to program_name
* Rename progpath to program_name
Py_GetPath() and Py_Main() now call
_PyMainInterpreterConfig_ReadEnv() to share the same code to get
environment variables.
Changes:
* Add _PyMainInterpreterConfig_ReadEnv()
* Add _PyMainInterpreterConfig_Clear()
* Add _PyMem_RawWcsdup()
* _PyMainInterpreterConfig: rename pythonhome to home
* Rename _Py_ReadMainInterpreterConfig() to
_PyMainInterpreterConfig_Read()
* Use _Py_INIT_USER_ERR(), instead of _Py_INIT_ERR(), for decoding
errors: the user is able to fix the issue, it's not a bug in
Python. Same change was made in _Py_INIT_NO_MEMORY().
* Remove _Py_GetPythonHomeWithConfig()
* calculate_path() rewritten in Modules/getpath.c and PC/getpathp.c
* Move global variables into a new PyPathConfig structure.
* calculate_path():
* Split the huge calculate_path() function into subfunctions.
* Add PyCalculatePath structure to pass data between subfunctions.
* Document PyCalculatePath fields.
* Move cleanup code into a new calculate_free() subfunction
* calculate_init() now handles Py_DecodeLocale() failures properly
* calculate_path() is now atomic: only replace PyPathConfig
(path_config) at once on success.
* _Py_GetPythonHomeWithConfig() now returns an error on failure
* Add _Py_INIT_NO_MEMORY() helper: report a memory allocation failure
* Coding style fixes (PEP 7)
* Py_Main() now reads the PYTHONHOME environment variable
* Add _Py_GetPythonHomeWithConfig() private function
* Add _PyWarnings_InitWithConfig()
* init_filters() doesn't get the current core configuration from the
current interpreter or Python thread anymore. Pass explicitly the
configuration to _PyWarnings_InitWithConfig().
* _Py_InitializeCore() now fails on _PyWarnings_InitWithConfig()
failure.
* Pass configuration as constant
Changes:
* Py_Main() initializes _PyCoreConfig.module_search_path_env from
the PYTHONPATH environment variable.
* PyInterpreterState_New() now initializes core_config and config
fields
* Compute sys.path a little bit ealier in
_Py_InitializeMainInterpreter() and new_interpreter()
* Add _Py_GetPathWithConfig() private function.
Py_Main() now handles two more -X options:
* -X showrefcount: new _PyCoreConfig.show_ref_count field
* -X showalloccount: new _PyCoreConfig.show_alloc_count field
Parse more env vars in Py_Main():
* Add more options to _PyCoreConfig:
* faulthandler
* tracemalloc
* importtime
* Move code to parse environment variables from _Py_InitializeCore()
to Py_Main(). This change fixes a regression from Python 3.6:
PYTHONUNBUFFERED is now read before calling pymain_init_stdio().
* _PyFaulthandler_Init() and _PyTraceMalloc_Init() now take an
argument to decide if the module has to be enabled at startup.
* tracemalloc_start() is now responsible to check the maximum number
of frames.
Other changes:
* Cleanup Py_Main():
* Rename some pymain_xxx() subfunctions
* Add pymain_run_python() subfunction
* Cleanup Py_NewInterpreter()
* _PyInterpreterState_Enable() now reports failure
* init_hash_secret() now considers pyurandom() failure as an "user
error": don't fail with abort().
* pymain_optlist_append() and pymain_strdup() now sets err on memory
allocation failure.
Stefan Krah
Victor Stinner
Stéphane Wirtel
Eric Snow
Gregory P. Smith
Serhiy Storchaka
Pablo Galindo
Benjamin Peterson
Thomas Nyberg
Victor Stinner
Yury Selivanov
Marcel Plch
Antoine Pitrou