that info to code dynamically compiled *by* code compiled with generators
enabled. Doesn't yet work because there's still no way to tell the parser
that "yield" is OK (unlike nested_scopes, the parser has its fingers in
this too).
Replaced PyEval_GetNestedScopes by a more-general
PyEval_MergeCompilerFlags. Perhaps I should not have? I doubted it was
*intended* to be part of the public API, so just did.
the yield statement. I figure we have to have this in before I can
release 2.2a1 on Wednesday.
Note: test_generators is currently broken, I'm counting on Tim to fix
this.
Although this is a one-character change, more work needs to be done:
the compiler can get rid of a lot of non-nested-scopes code, the
documentation needs to be updated, the future statement can be
simplified, etc.
But this change enables the nested scope semantics everywhere, and
that's the important part -- we can now test code for compatibility
with nested scopes by default.
path (with no profile/trace function) through eval_code2() and
eval_frame() avoids several checks.
In the common cases of calls, returns, and exception propogation,
eval_code2() and eval_frame() used to test two values in the
thread-state: the profiling function and the tracing function. With
this change, a flag is set in the thread-state if either of these is
active, allowing a single check to suffice when both are NULL. This
also simplifies the code needed when either function is in use but is
already active (to avoid profiling/tracing the profiler/tracer); the
flag is set to 0 when the profile/trace code is entered, allowing the
same check to suffice for "already in the tracer" for call/return/
exception events.
Python interpreter.
This change adds two new C-level APIs: PyEval_SetProfile() and
PyEval_SetTrace(). These can be used to install profile and trace
functions implemented in C, which can operate at much higher speeds
than Python-based functions. The overhead for calling a C-based
profile function is a very small fraction of a percent of the overhead
involved in calling a Python-based function.
The machinery required to call a Python-based profile or trace
function been moved to sysmodule.c, where sys.setprofile() and
sys.setprofile() simply become users of the new interface.
Implement sys.maxunicode.
Explicitly wrap around upper/lower computations for wide Py_UNICODE.
When decoding large characters with UTF-8, represent expected test
results using the \U notation.
Add configure option --enable-unicode.
Add config.h macros Py_USING_UNICODE, PY_UNICODE_TYPE, Py_UNICODE_SIZE,
SIZEOF_WCHAR_T.
Define Py_UCS2.
Encode and decode large UTF-8 characters into single Py_UNICODE values
for wide Unicode types; likewise for UTF-16.
Remove test whether sizeof Py_UNICODE is two.
unicodeobject.h, which forces sizeof(Py_UNICODE) == sizeof(Py_UCS4).
(this may be good enough for platforms that doesn't have a 16-bit
type. the UTF-16 codecs don't work, though)
the next free valuestack slot, not to the base (in America, stacks push
and pop at the top -- they mutate at the bottom in Australia <winK>).
eval_frame(): assert that f_stacktop isn't NULL upon entry.
frame_delloc(): avoid ordered pointer comparisons involving f_stacktop
when f_stacktop is NULL.
Gave Python linear-time repr() implementations for dicts, lists, strings.
This means, e.g., that repr(range(50000)) is no longer 50x slower than
pprint.pprint() in 2.2 <wink>.
I don't consider this a bugfix candidate, as it's a performance boost.
Added _PyString_Join() to the internal string API. If we want that in the
public API, fine, but then it requires runtime error checks instead of
asserts.
_PyLong_FromByteArray
_PyLong_AsByteArray
Untested and probably buggy -- they compile OK, but nothing calls them
yet. Will soon be called by the struct module, to implement x-platform
'q' and 'Q'.
If other people have uses for them, we could move them into the public API.
See longobject.h for usage details.
UTF-16 codec will now interpret and remove a *leading* BOM mark. Sub-
sequent BOM characters are no longer interpreted and removed.
UTF-16-LE and -BE pass through all BOM mark characters.
These changes should get the UTF-16 codec more in line with what
the Unicode FAQ recommends w/r to BOM marks.
and introduces a new method .decode().
The major change is that strg.encode() will no longer try to convert
Unicode returns from the codec into a string, but instead pass along
the Unicode object as-is. The same is now true for all other codec
return types. The underlying C APIs were changed accordingly.
Note that even though this does have the potential of breaking
existing code, the chances are low since conversion from Unicode
previously took place using the default encoding which is normally
set to ASCII rendering this auto-conversion mechanism useless for
most Unicode encodings.
The good news is that you can now use .encode() and .decode() with
much greater ease and that the door was opened for better accessibility
of the builtin codecs.
As demonstration of the new feature, the patch includes a few new
codecs which allow string to string encoding and decoding (rot13,
hex, zip, uu, base64).
Written by Marc-Andre Lemburg. Copyright assigned to the PSF.
Store floats and doubles to full precision in marshal.
Test that floats read from .pyc/.pyo closely match those read from .py.
Declare PyFloat_AsString() in floatobject header file.
Add new PyFloat_AsReprString() API function.
Document the functions declared in floatobject.h.
safely together and don't duplicate logic (the common logic was factored
out into new private API function _PySequence_IterContains()).
Visible change:
some_complex_number in some_instance
no longer blows up if some_instance has __getitem__ but neither
__contains__ nor __iter__. test_iter changed to ensure that remains true.
NEEDS DOC CHANGES.
This one surprised me! While I expected tuple() to be a no-brainer, turns
out it's actually dripping with consequences:
1. It will *allow* the popular PySequence_Fast() to work with any iterable
object (code for that not yet checked in, but should be trivial).
2. It caused two std tests to fail. This because some places used
PyTuple_Sequence() (the C spelling of tuple()) as an indirect way to test
whether something *is* a sequence. But tuple() code only looked for the
existence of sq->item to determine that, and e.g. an instance passed
that test whether or not it supported the other operations tuple()
needed (e.g., __len__). So some things the tests *expected* to fail
with an AttributeError now fail with a TypeError instead. This looks
like an improvement to me; e.g., test_coercion used to produce 559
TypeErrors and 2 AttributeErrors, and now they're all TypeErrors. The
error details are more informative too, because the places calling this
were *looking* for TypeErrors in order to replace the generic tuple()
"not a sequence" msg with their own more specific text, and
AttributeErrors snuck by that.
patch for sharing single character Unicode objects.
Martin's patch had to be reworked in a number of ways to take Unicode
resizing into consideration as well. Here's what the updated patch
implements:
* Single character Unicode strings in the Latin-1 range are shared
(not only ASCII chars as in Martin's original patch).
* The ASCII and Latin-1 codecs make use of this optimization,
providing a noticable speedup for single character strings. Most
Unicode methods can use the optimization as well (by virtue
of using PyUnicode_FromUnicode()).
* Some code cleanup was done (replacing memcpy with Py_UNICODE_COPY)
* The PyUnicode_Resize() can now also handle the case of resizing
unicode_empty which previously resulted in an error.
* Modified the internal API _PyUnicode_Resize() and
the public PyUnicode_Resize() API to handle references to
shared objects correctly. The _PyUnicode_Resize() signature
changed due to this.
* Callers of PyUnicode_FromUnicode() may now only modify the Unicode
object contents of the returned object in case they called the API
with NULL as content template.
Note that even though this patch passes the regression tests, there
may still be subtle bugs in the sharing code.
sees it (test_iter.py is unchanged).
- Added a tp_iternext slot, which calls the iterator's next() method;
this is much faster for built-in iterators over built-in types
such as lists and dicts, speeding up pybench's ForLoop with about
25% compared to Python 2.1. (Now there's a good argument for
iterators. ;-)
- Renamed the built-in sequence iterator SeqIter, affecting the C API
functions for it. (This frees up the PyIter prefix for generic
iterator operations.)
- Added PyIter_Check(obj), which checks that obj's type has a
tp_iternext slot and that the proper feature flag is set.
- Added PyIter_Next(obj) which calls the tp_iternext slot. It has a
somewhat complex return condition due to the need for speed: when it
returns NULL, it may not have set an exception condition, meaning
the iterator is exhausted; when the exception StopIteration is set
(or a derived exception class), it means the same thing; any other
exception means some other error occurred.
new slot tp_iter in type object, plus new flag Py_TPFLAGS_HAVE_ITER
new C API PyObject_GetIter(), calls tp_iter
new builtin iter(), with two forms: iter(obj), and iter(function, sentinel)
new internal object types iterobject and calliterobject
new exception StopIteration
new opcodes for "for" loops, GET_ITER and FOR_ITER (also supported by dis.py)
new magic number for .pyc files
new special method for instances: __iter__() returns an iterator
iteration over dictionaries: "for x in dict" iterates over the keys
iteration over files: "for x in file" iterates over lines
TODO:
documentation
test suite
decide whether to use a different way to spell iter(function, sentinal)
decide whether "for key in dict" is a good idea
use iterators in map/filter/reduce, min/max, and elsewhere (in/not in?)
speed tuning (make next() a slot tp_next???)
Update docstring and library reference section on 'sys' module.
New API PyErr_Display, just for displaying errors, called by excepthook.
Uncaught exceptions now call sys.excepthook; if that fails, we fall back
to calling PyErr_Display directly.
Also comes with sys.__excepthook__ and sys.__displayhook__.
must now initialize the extra field used by the weak-ref machinery to
NULL themselves, to avoid having to require PyObject_INIT() to check
if the type supports weak references and do it there. This causes less
work to be done for all objects (the type object does not need to be
consulted to check for the Py_TPFLAGS_HAVE_WEAKREFS bit).
If a module has a future statement enabling nested scopes, they are
also enable for the exec statement and the functions compile() and
execfile() if they occur in the module.
If Python is run with the -i option, which enters interactive mode
after executing a script, and the script it runs enables nested
scopes, they are also enabled in interactive mode.
XXX The use of -i with -c "from __future__ import nested_scopes" is
not supported. What's the point?
To support these changes, many function variants have been added to
pythonrun.c. All the variants names end with Flags and they take an
extra PyCompilerFlags * argument. It is possible that this complexity
will be eliminated in a future version of the interpreter in which
nested scopes are not optional.
with free variables. Thanks to Martin v. Loewis for finding two of
the problems. This fixes SF buf 405583.
There is also a C API change: PyFrame_New() is reverting to its
pre-2.1 signature. The change introduced by nested scopes was a
mistake. XXX Is this okay between beta releases?
cell_clear(), the GC helper, must decref its reference to break
cycles.
frame_dealloc() must dealloc all cell vars and free vars in addition
to locals.
eval_code2() setup code must INCREF cells it copies out of the
closure.
The STORE_DEREF opcode implementation must DECREF the object it passes
to PyCell_Set().
Tim Peters
Guido van Rossum
Thomas Wouters
Fred Drake
Fredrik Lundh
Martin v. Löwis
Marc-André Lemburg
Mark Hammond
Ka-Ping Yee
Jeremy Hylton