In the experimental isolated subinterpreters build mode, the GIL is
now per-interpreter.
Move gil from _PyRuntimeState.ceval to PyInterpreterState.ceval.
new_interpreter() always get the config from the main interpreter.
In the experimental isolated subinterpreters build mode,
_PyThreadState_GET() gets the autoTSSkey variable and
_PyThreadState_Swap() sets the autoTSSkey variable.
* Add _PyThreadState_GetTSS()
* _PyRuntimeState_GetThreadState() and _PyThreadState_GET()
return _PyThreadState_GetTSS()
* PyEval_SaveThread() sets the autoTSSkey variable to current Python
thread state rather than NULL.
* eval_frame_handle_pending() doesn't check that
_PyThreadState_Swap() result is NULL.
* _PyThreadState_Swap() gets the current Python thread state with
_PyThreadState_GetTSS() rather than
_PyRuntimeGILState_GetThreadState().
* PyGILState_Ensure() no longer checks _PyEval_ThreadsInitialized()
since it cannot access the current interpreter.
Move recursion_limit member from _PyRuntimeState.ceval to
PyInterpreterState.ceval.
* Py_SetRecursionLimit() now only sets _Py_CheckRecursionLimit
of ceval.c if the current Python thread is part of the main
interpreter.
* Inline _Py_MakeEndRecCheck() into _Py_LeaveRecursiveCall().
* Convert _Py_RecursionLimitLowerWaterMark() macro into a static
inline function.
If _PyCode_InitOpcache() fails in _PyEval_EvalFrameDefault(), use
"goto exit_eval_frame;" rather than "return NULL;" to exit the
function in a consistent state. For example, tstate->frame is now
reset properly.
Rename _PyInterpreterState_GET_UNSAFE() to _PyInterpreterState_GET()
for consistency with _PyThreadState_GET() and to have a shorter name
(help to fit into 80 columns).
Add also "assert(tstate != NULL);" to the function.
Fix the signal handler: it now always uses the main interpreter,
rather than trying to get the current Python thread state.
The following function now accepts an interpreter, instead of a
Python thread state:
* _PyEval_SignalReceived()
* _Py_ThreadCanHandleSignals()
* _PyEval_AddPendingCall()
* COMPUTE_EVAL_BREAKER()
* SET_GIL_DROP_REQUEST(), RESET_GIL_DROP_REQUEST()
* SIGNAL_PENDING_CALLS(), UNSIGNAL_PENDING_CALLS()
* SIGNAL_PENDING_SIGNALS(), UNSIGNAL_PENDING_SIGNALS()
* SIGNAL_ASYNC_EXC(), UNSIGNAL_ASYNC_EXC()
Py_AddPendingCall() now uses the main interpreter if it fails to the
current Python thread state.
Convert _PyThreadState_GET() and PyInterpreterState_GET_UNSAFE()
macros to static inline functions.
PyInterpreterState_New() is now responsible to create pending calls,
PyInterpreterState_Delete() now deletes pending calls.
* Rename _PyEval_InitThreads() to _PyEval_InitGIL() and rename
_PyEval_InitGIL() to _PyEval_FiniGIL().
* _PyEval_InitState() and PyEval_FiniState() now create and delete
pending calls. _PyEval_InitState() now returns -1 on memory
allocation failure.
* Add init_interp_create_gil() helper function: code shared by
Py_NewInterpreter() and Py_InitializeFromConfig().
* init_interp_create_gil() now also calls _PyEval_FiniGIL(),
_PyEval_InitGIL() and _PyGILState_Init() in subinterpreters, but
these functions now do nothing when called from a subinterpreter.
Add _PyIndex_Check() function to the internal C API: fast inlined
verson of PyIndex_Check().
Add Include/internal/pycore_abstract.h header file.
Replace PyIndex_Check() with _PyIndex_Check() in C files of Objects
and Python subdirectories.
Remove _PyRuntime.getframe hook and remove _PyThreadState_GetFrame
macro which was an alias to _PyRuntime.getframe. They were only
exposed by the internal C API. Remove also PyThreadFrameGetter type.
If a thread different than the main thread schedules a pending call
(Py_AddPendingCall()), the bytecode evaluation loop is no longer
interrupted at each bytecode instruction to check for pending calls
which cannot be executed. Only the main thread can execute pending
calls.
Previously, the bytecode evaluation loop was interrupted at each
instruction until the main thread executes pending calls.
* Add _Py_ThreadCanHandlePendingCalls() function.
* SIGNAL_PENDING_CALLS() now only sets eval_breaker to 1 if the
current thread can execute pending calls. Only the main thread can
execute pending calls.
COMPUTE_EVAL_BREAKER() now also checks if the Python thread state
belongs to the main interpreter. Don't break the evaluation loop if
there are pending signals but the Python thread state it belongs to a
subinterpeter.
* Add _Py_IsMainThread() function.
* Add _Py_ThreadCanHandleSignals() function.
If a thread different than the main thread gets a signal, the
bytecode evaluation loop is no longer interrupted at each bytecode
instruction to check for pending signals which cannot be handled.
Only the main thread of the main interpreter can handle signals.
Previously, the bytecode evaluation loop was interrupted at each
instruction until the main thread handles signals.
Changes:
* COMPUTE_EVAL_BREAKER() and SIGNAL_PENDING_SIGNALS() no longer set
eval_breaker to 1 if the current thread cannot handle signals.
* take_gil() now always recomputes eval_breaker.
If Py_AddPendingCall() is called in a subinterpreter, the function is
now scheduled to be called from the subinterpreter, rather than being
called from the main interpreter.
Each subinterpreter now has its own list of scheduled calls.
* Move pending and eval_breaker fields from _PyRuntimeState.ceval
to PyInterpreterState.ceval.
* new_interpreter() now calls _PyEval_InitThreads() to create
pending calls lock.
* Fix Py_AddPendingCall() for subinterpreters. It now calls
_PyThreadState_GET() which works in a subinterpreter if the
caller holds the GIL, and only falls back on
PyGILState_GetThisThreadState() if _PyThreadState_GET()
returns NULL.
bpo-37127, bpo-39984:
* trip_signal() and Py_AddPendingCall() now get the current Python
thread state using PyGILState_GetThisThreadState() rather than
_PyRuntimeState_GetThreadState() to be able to get it even if the
GIL is released.
* _PyEval_SignalReceived() now expects tstate rather than ceval.
* Remove ceval parameter of _PyEval_AddPendingCall(): ceval is now
get from tstate parameter.
* _PyThreadState_DeleteCurrent() now takes tstate rather than
runtime.
* Add ensure_tstate_not_null() helper to pystate.c.
* Add _PyEval_ReleaseLock() function.
* _PyThreadState_DeleteCurrent() now calls
_PyEval_ReleaseLock(tstate) and frees PyThreadState memory after
this call, not before.
* PyGILState_Release(): rename "tcur" variable to "tstate".
* sys.settrace(), sys.setprofile() and _lsprof.Profiler.enable() now
properly report PySys_Audit() error if "sys.setprofile" or
"sys.settrace" audit event is denied.
* Add _PyEval_SetProfile() and _PyEval_SetTrace() function: similar
to PyEval_SetProfile() and PyEval_SetTrace() but take a tstate
parameter and return -1 on error.
* Add _PyObject_FastCallTstate() function.
PyInterpreterState.eval_frame function now requires a tstate (Python
thread state) parameter.
Add private functions to the C API to get and set the frame
evaluation function:
* Add tstate parameter to _PyFrameEvalFunction function type.
* Add _PyInterpreterState_GetEvalFrameFunc() and
_PyInterpreterState_SetEvalFrameFunc() functions.
* Add tstate parameter to _PyEval_EvalFrameDefault().
PyGILState_Ensure() doesn't call PyEval_InitThreads() anymore when a
new Python thread state is created. The GIL is created by
Py_Initialize() since Python 3.7, it's not needed to call
PyEval_InitThreads() explicitly.
Add an assertion to ensure that the GIL is already created.
* Remove ceval parameter of take_gil(): get it from tstate.
* Move exit_thread_if_finalizing() call inside take_gil(). Replace
exit_thread_if_finalizing() with tstate_must_exit(): the caller is
now responsible to call PyThread_exit_thread().
* Move is_tstate_valid() assertion inside take_gil(). Remove
is_tstate_valid(): inline code into take_gil().
* Move gil_created() assertion inside take_gil().
* exit_thread_if_finalizing() does now access directly _PyRuntime
variable, rather than using tstate->interp->runtime since tstate
can be a dangling pointer after Py_Finalize() has been called.
* exit_thread_if_finalizing() is now called *before* calling
take_gil(). _PyRuntime.finalizing is an atomic variable,
we don't need to hold the GIL to access it.
* Add ensure_tstate_not_null() function to check that tstate is not
NULL at runtime. Check tstate earlier. take_gil() does not longer
check if tstate is NULL.
Cleanup:
* PyEval_RestoreThread() no longer saves/restores errno: it's already
done inside take_gil().
* PyEval_AcquireLock(), PyEval_AcquireThread(),
PyEval_RestoreThread() and _PyEval_EvalFrameDefault() now check if
tstate is valid with the new is_tstate_valid() function which uses
_PyMem_IsPtrFreed().
The Py_FatalError() function is replaced with a macro which logs
automatically the name of the current function, unless the
Py_LIMITED_API macro is defined.
Changes:
* Add _Py_FatalErrorFunc() function.
* Remove the function name from the message of Py_FatalError() calls
which included the function name.
* Update tests.
Convert _PyRuntimeState.finalizing field to an atomic variable:
* Rename it to _finalizing
* Change its type to _Py_atomic_address
* Add _PyRuntimeState_GetFinalizing() and _PyRuntimeState_SetFinalizing()
functions
* Remove _Py_CURRENTLY_FINALIZING() function: replace it with testing
directly _PyRuntimeState_GetFinalizing() value
Convert _PyRuntimeState_GetThreadState() to static inline function.
In function `_PyEval_EvalFrameDefault`, macros PREDICT and PREDICTED use the same identifier creation scheme, which may be shared between them, reducing code repetition, and do ensure that the same identifier is generated.
gcc -Wcast-qual turns up a number of instances of casting away constness of pointers. Some of these can be safely modified, by either:
Adding the const to the type cast, as in:
- return _PyUnicode_FromUCS1((unsigned char*)s, size);
+ return _PyUnicode_FromUCS1((const unsigned char*)s, size);
or, Removing the cast entirely, because it's not necessary (but probably was at one time), as in:
- PyDTrace_FUNCTION_ENTRY((char *)filename, (char *)funcname, lineno);
+ PyDTrace_FUNCTION_ENTRY(filename, funcname, lineno);
These changes will not change code, but they will make it much easier to check for errors in consts
The bulk of this patch was generated automatically with:
for name in \
PyObject_Vectorcall \
Py_TPFLAGS_HAVE_VECTORCALL \
PyObject_VectorcallMethod \
PyVectorcall_Function \
PyObject_CallOneArg \
PyObject_CallMethodNoArgs \
PyObject_CallMethodOneArg \
;
do
echo $name
git grep -lwz _$name | xargs -0 sed -i "s/\b_$name\b/$name/g"
done
old=_PyObject_FastCallDict
new=PyObject_VectorcallDict
git grep -lwz $old | xargs -0 sed -i "s/\b$old\b/$new/g"
and then cleaned up:
- Revert changes to in docs & news
- Revert changes to backcompat defines in headers
- Nudge misaligned comments
Victor Stinner
Dong-hee Na
Zackery Spytz
Andy Lester
Denis Chernikov
Petr Viktorin