* Inline cmdline_get_env_flags() into config_read_env_vars():
_PyCoreConfig_Read() now reads much more environment variables like
PYTHONVERBOSE.
* Allow to override faulthandler and allocator even if dev_mode=1.
PYTHONMALLOC is now the priority over PYTHONDEVMODE.
* Fix _PyCoreConfig_Copy(): copy also install_signal_handlers,
coerce_c_locale and coerce_c_locale_warn
* _PyCoreConfig.install_signal_handlers default is now 1: install
signals by default
* Fix also a compiler warning: don't define _PyPathConfig type twice.
On Windows, passing a negative value to local results in an OSError because localtime_s on Windows does not support negative timestamps. Unfortunately this means that fold detection for timestamps between 0 and max_fold_seconds will result in this OSError since we subtract max_fold_seconds from the timestamp to detect a fold. However, since we know there haven't been any folds in the interval [0, max_fold_seconds) in any timezone, we can hackily just forego fold detection for this time range on Windows.
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
Add more fields to _PyCoreConfig:
* _check_hash_pycs_mode
* bytes_warning
* debug
* inspect
* interactive
* legacy_windows_fs_encoding
* legacy_windows_stdio
* optimization_level
* quiet
* unbuffered_stdio
* user_site_directory
* verbose
* write_bytecode
Changes:
* Remove pymain_get_global_config() and pymain_set_global_config()
which became useless. These functions have been replaced by
_PyCoreConfig_GetGlobalConfig() and
_PyCoreConfig_SetGlobalConfig().
* sys.flags.dont_write_bytecode value is now restricted to 1 even if
-B option is specified multiple times on the command line.
* PyThreadState_Clear() now uses the config from the current
interpreter rather than using global Py_VerboseFlag
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Py_Main() can again be called after Py_Initialize(), as in Python
3.6. The new configuration is ignored, except of
_PyMainInterpreterConfig.argv which is used to update sys.argv.
bpo-32430: Rename Modules/Setup.dist to Modules/Setup
Remove the necessity to copy the former manually to the latter when updating the local source tree.
They can be exposed when some C API calls fail due to lack of
memory.
* Failed Py_BuildValue() could cause an assertion error in the
following TextIOWrapper.tell().
* input_chunk could be decrefed twice in TextIOWrapper.seek()
after failed Py_BuildValue().
* initvalue could leak in StringIO.__getstate__() after failed
PyDict_Copy().
* `flags` is indeed deprecated, but there is a validation on its value for
backwards compatibility reasons. This adds mention of this in the docs.
* The docs say that `sizehint` is deprecated and ignored, but it is still
used when `epoll_create1()` is unavailable. This adds mention of this in
the docs.
* `sizehint=-1` is acceptable again, and is replaced with `FD_SETSIZE-1`.
This is needed to have a default value available at the Python level,
since `FD_SETSIZE` is not exposed to Python. (see: bpo-31938)
* Reject `sizehint=0` since it is invalid to pass on to `epoll_create()`.
The relevant tests have also been updated.
* Fix also PyInit__gdbm() to catch errors.
* test.pythoninfo: add gdbm.version
* test_dbm_gnu now logs GDBM_VERSION when run in verbose mode.
* pythoninfo: rename function to collect_gdbm()
bpo-33671
* use memoryview() with size == file size on Windows, see https://github.com/python/cpython/pull/7160#discussion_r195405230
* release intermediate (sliced) memoryview immediately
* replace "OSX" occurrences with "macOS"
* add some unittests for copyfileobj()
In some development setups it is inconvenient or impossible to write bytecode
caches to the code tree, but the bytecode caches are still useful. The
PYTHONPYCACHEPREFIX environment variable allows specifying an alternate
location for cached bytecode files, within which a directory tree mirroring the code
tree will be created. This cache tree is then used (for both reading and writing)
instead of the local `__pycache__` subdirectory within each source directory.
Exposed at runtime as sys.pycache_prefix (defaulting to None), and can
be set from the CLI as "-X pycache_prefix=path".
Patch by Carl Meyer.
Fix "LC_ALL=C python3.7 -V": reset properly the command line parser
when the encoding changes after reading the Python configuration.
Fix pymain_read_conf(): use memset(0) to reset properly cmdline.
Hangul composition check boundaries are wrong for the second character
([0x1161, 0x1176) instead of [0x1161, 0x1176]) and third character ((0x11A7, 0x11C3)
instead of [0x11A7, 0x11C3]).
All the subinterpreter tests were disabled in gh-7513. This commit re-enables them, but leaves one bad test disabled. The test is partly causing problems because it makes assumptions about the availability of a high-level interpreters module (see PEP 554). So I'm disabling the test until such a high-level module is available.
* have shutil.copyfileobj use sendfile() if possible
* refactoring: use ctx manager
* add test with non-regular file obj
* emulate case where file size can't be determined
* reference _copyfileobj_sendfile directly
* add test for offset() at certain position
* add test for empty file
* add test for non regular file dst
* small refactoring
* leave copyfileobj() alone in order to not introduce any incompatibility
* minor refactoring
* remove old test
* update docstring
* update docstring; rename exception class
* detect platforms which only support file to socket zero copy
* don't run test on platforms where file-to-file zero copy is not supported
* use tempfiles
* reset verbosity
* add test for smaller chunks
* add big file size test
* add comment
* update doc
* update whatsnew doc
* update doc
* catch Exception
* remove unused import
* add test case for error on second sendfile() call
* turn docstring into comment
* add one more test
* update comment
* add Misc/NEWS entry
* get rid of COPY_BUFSIZE; it belongs to another PR
* update doc
* expose posix._fcopyfile() for OSX
* merge from linux branch
* merge from linux branch
* expose fcopyfile
* arg clinic for the win implementation
* convert path type to path_t
* expose CopyFileW
* fix windows tests
* release GIL
* minor refactoring
* update doc
* update comment
* update docstrings
* rename functions
* rename test classes
* update doc
* update doc
* update docstrings and comments
* avoid do import nt|posix modules if unnecessary
* set nt|posix modules to None if not available
* micro speedup
* update description
* add doc note
* use better wording in doc
* rename function using 'fastcopy' prefix instead of 'zerocopy'
* use :ref: in rst doc
* change wording in doc
* add test to make sure sendfile() doesn't get called aymore in case it doesn't support file to file copies
* move CopyFileW in _winapi and actually expose CopyFileExW instead
* fix line endings
* add tests for mode bits
* add docstring
* remove test file mode class; let's keep it for later when Istart addressing OSX fcopyfile() specific copies
* update doc to reflect new changes
* update doc
* adjust tests on win
* fix argument clinic error
* update doc
* OSX: expose copyfile(3) instead of fcopyfile(3); also expose flags arg to python
* osx / copyfile: use path_t instead of char
* do not set dst name in the OSError exception in order to remain consistent with platforms which cannot do that (e.g. linux)
* add same file test
* add test for same file
* have osx copyfile() pre-emptively check if src and dst are the same, otherwise it will return immedialtey and src file content gets deleted
* turn PermissionError into appropriate SameFileError
* expose ERROR_SHARING_VIOLATION in order to raise more appropriate SameFileError
* honour follow_symlinks arg when using CopyFileEx
* update Misc/NEWS
* expose CreateDirectoryEx mock
* change C type
* CreateDirectoryExW actual implementation
* provide specific makedirs() implementation for win
* fix typo
* skeleton for SetNamedSecurityInfo
* get security info for src path
* finally set security attrs
* add unit tests
* mimick os.makedirs() behavior and raise if dst dir exists
* set 2 paths for OSError object
* set 2 paths for OSError object
* expand windows test
* in case of exception on os.sendfile() set filename and filename2 exception attributes
* set 2 filenames (src, dst) for OSError in case copyfile() fails on OSX
* update doc
* do not use CreateDirectoryEx() in copytree() if source dir is a symlink (breaks test_copytree_symlink_dir); instead just create a plain dir and remain consistent with POSIX implementation
* use bytearray() and readinto()
* use memoryview() with bytearray()
* refactoring + introduce a new _fastcopy_binfileobj() fun
* remove CopyFileEx and other C wrappers
* remove code related to CopyFileEx
* Recognize binary files in copyfileobj()
...and use fastest _fastcopy_binfileobj() when possible
* set 1MB copy bufsize on win; also add a global _COPY_BUFSIZE variable
* use ctx manager for memoryview()
* update doc
* remove outdated doc
* remove last CopyFileEx remnants
* OSX - use fcopyfile(3) instead of copyfile(3)
...as an extra safety measure: in case src/dst are "exotic" files (non
regular or living on a network fs etc.) we better fail on open() instead
of copyfile(3) as we're not quite sure what's gonna happen in that
case.
* update doc
Serhiy Storchaka
Victor Stinner
Ammar Askar
erikjanss
ValeriyaSinevich
Zackery Spytz
Antoine Pitrou
Raymond Hettinger
INADA Naoki
Benjamin Peterson
Sergey Fedoseev
Tal Einat
jdemeyer
Xiang Zhang
Giampaolo Rodola
Pablo Galindo
Carl Meyer
Wonsup Yoon
Eric Snow