* Fix integer overflow in os.readv(), os.writev(), os.preadv()
and os.pwritev() and in os.sendfile() with headers or trailers
arguments (on BSD-based OSes and MacOS).
* Fix sending the part of the file in os.sendfile() on MacOS.
Using the trailers argument could cause sending more bytes from
the input file than was specified.
Thanks Ned Deily for testing on 32-bit MacOS.
* help(hashlib) didn't work because of incorrect module name in blake2b and
blake2s classes.
* Constructors blake2*(), sha3_*(), shake_*() and keccak_*() incorrectly
accepted keyword argument "string" for binary data, but documented as
accepting the "data" keyword argument. Now this parameter is positional-only.
* Keyword-only parameters in blake2b() and blake2s() were not documented as
keyword-only.
* Default value for some parameters of blake2b() and blake2s() was None,
which is not acceptable value.
* The length argument for shake_*.digest() was wrapped out to 32 bits.
* The argument for shake_128.digest() and shake_128.hexdigest() was not
positional-only as intended.
* TypeError messages for incorrect arguments in all constructors sha3_*(),
shake_*() and keccak_*() incorrectly referred to sha3_224.
Also made the following enhancements:
* More accurately specified input and result types for strings, bytes and
bytes-like objects.
* Unified positional parameter names for update() and constructors.
* Improved formatting.
This list is never used: if detect_types is on, this list will be
replaced with another one before row_cast_map is used, if
detect_types is off, row_cast_map is not used at all.
* Config: Rename ignore_environment field to use_environment.
* _PyCoreConfig_Read(): if isolated is set, use_environment and
site_import are now always set to 0.
* Inline pymain_free_raw() into pymain_free()
* Move config_init_warnoptions() call into pymain_read_conf_impl()
* _PyCoreConfig_Read(): don't replace values if they are already set:
faulthandler, pycache_prefix, home.
* Inline cmdline_get_env_flags() into config_read_env_vars():
_PyCoreConfig_Read() now reads much more environment variables like
PYTHONVERBOSE.
* Allow to override faulthandler and allocator even if dev_mode=1.
PYTHONMALLOC is now the priority over PYTHONDEVMODE.
* Fix _PyCoreConfig_Copy(): copy also install_signal_handlers,
coerce_c_locale and coerce_c_locale_warn
* _PyCoreConfig.install_signal_handlers default is now 1: install
signals by default
* Fix also a compiler warning: don't define _PyPathConfig type twice.
On Windows, passing a negative value to local results in an OSError because localtime_s on Windows does not support negative timestamps. Unfortunately this means that fold detection for timestamps between 0 and max_fold_seconds will result in this OSError since we subtract max_fold_seconds from the timestamp to detect a fold. However, since we know there haven't been any folds in the interval [0, max_fold_seconds) in any timezone, we can hackily just forego fold detection for this time range on Windows.
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
Add more fields to _PyCoreConfig:
* _check_hash_pycs_mode
* bytes_warning
* debug
* inspect
* interactive
* legacy_windows_fs_encoding
* legacy_windows_stdio
* optimization_level
* quiet
* unbuffered_stdio
* user_site_directory
* verbose
* write_bytecode
Changes:
* Remove pymain_get_global_config() and pymain_set_global_config()
which became useless. These functions have been replaced by
_PyCoreConfig_GetGlobalConfig() and
_PyCoreConfig_SetGlobalConfig().
* sys.flags.dont_write_bytecode value is now restricted to 1 even if
-B option is specified multiple times on the command line.
* PyThreadState_Clear() now uses the config from the current
interpreter rather than using global Py_VerboseFlag
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Py_Main() can again be called after Py_Initialize(), as in Python
3.6. The new configuration is ignored, except of
_PyMainInterpreterConfig.argv which is used to update sys.argv.
bpo-32430: Rename Modules/Setup.dist to Modules/Setup
Remove the necessity to copy the former manually to the latter when updating the local source tree.
They can be exposed when some C API calls fail due to lack of
memory.
* Failed Py_BuildValue() could cause an assertion error in the
following TextIOWrapper.tell().
* input_chunk could be decrefed twice in TextIOWrapper.seek()
after failed Py_BuildValue().
* initvalue could leak in StringIO.__getstate__() after failed
PyDict_Copy().
* `flags` is indeed deprecated, but there is a validation on its value for
backwards compatibility reasons. This adds mention of this in the docs.
* The docs say that `sizehint` is deprecated and ignored, but it is still
used when `epoll_create1()` is unavailable. This adds mention of this in
the docs.
* `sizehint=-1` is acceptable again, and is replaced with `FD_SETSIZE-1`.
This is needed to have a default value available at the Python level,
since `FD_SETSIZE` is not exposed to Python. (see: bpo-31938)
* Reject `sizehint=0` since it is invalid to pass on to `epoll_create()`.
The relevant tests have also been updated.
* Fix also PyInit__gdbm() to catch errors.
* test.pythoninfo: add gdbm.version
* test_dbm_gnu now logs GDBM_VERSION when run in verbose mode.
* pythoninfo: rename function to collect_gdbm()
bpo-33671
* use memoryview() with size == file size on Windows, see https://github.com/python/cpython/pull/7160#discussion_r195405230
* release intermediate (sliced) memoryview immediately
* replace "OSX" occurrences with "macOS"
* add some unittests for copyfileobj()
In some development setups it is inconvenient or impossible to write bytecode
caches to the code tree, but the bytecode caches are still useful. The
PYTHONPYCACHEPREFIX environment variable allows specifying an alternate
location for cached bytecode files, within which a directory tree mirroring the code
tree will be created. This cache tree is then used (for both reading and writing)
instead of the local `__pycache__` subdirectory within each source directory.
Exposed at runtime as sys.pycache_prefix (defaulting to None), and can
be set from the CLI as "-X pycache_prefix=path".
Patch by Carl Meyer.
Fix "LC_ALL=C python3.7 -V": reset properly the command line parser
when the encoding changes after reading the Python configuration.
Fix pymain_read_conf(): use memset(0) to reset properly cmdline.
Hangul composition check boundaries are wrong for the second character
([0x1161, 0x1176) instead of [0x1161, 0x1176]) and third character ((0x11A7, 0x11C3)
instead of [0x11A7, 0x11C3]).
All the subinterpreter tests were disabled in gh-7513. This commit re-enables them, but leaves one bad test disabled. The test is partly causing problems because it makes assumptions about the availability of a high-level interpreters module (see PEP 554). So I'm disabling the test until such a high-level module is available.
* have shutil.copyfileobj use sendfile() if possible
* refactoring: use ctx manager
* add test with non-regular file obj
* emulate case where file size can't be determined
* reference _copyfileobj_sendfile directly
* add test for offset() at certain position
* add test for empty file
* add test for non regular file dst
* small refactoring
* leave copyfileobj() alone in order to not introduce any incompatibility
* minor refactoring
* remove old test
* update docstring
* update docstring; rename exception class
* detect platforms which only support file to socket zero copy
* don't run test on platforms where file-to-file zero copy is not supported
* use tempfiles
* reset verbosity
* add test for smaller chunks
* add big file size test
* add comment
* update doc
* update whatsnew doc
* update doc
* catch Exception
* remove unused import
* add test case for error on second sendfile() call
* turn docstring into comment
* add one more test
* update comment
* add Misc/NEWS entry
* get rid of COPY_BUFSIZE; it belongs to another PR
* update doc
* expose posix._fcopyfile() for OSX
* merge from linux branch
* merge from linux branch
* expose fcopyfile
* arg clinic for the win implementation
* convert path type to path_t
* expose CopyFileW
* fix windows tests
* release GIL
* minor refactoring
* update doc
* update comment
* update docstrings
* rename functions
* rename test classes
* update doc
* update doc
* update docstrings and comments
* avoid do import nt|posix modules if unnecessary
* set nt|posix modules to None if not available
* micro speedup
* update description
* add doc note
* use better wording in doc
* rename function using 'fastcopy' prefix instead of 'zerocopy'
* use :ref: in rst doc
* change wording in doc
* add test to make sure sendfile() doesn't get called aymore in case it doesn't support file to file copies
* move CopyFileW in _winapi and actually expose CopyFileExW instead
* fix line endings
* add tests for mode bits
* add docstring
* remove test file mode class; let's keep it for later when Istart addressing OSX fcopyfile() specific copies
* update doc to reflect new changes
* update doc
* adjust tests on win
* fix argument clinic error
* update doc
* OSX: expose copyfile(3) instead of fcopyfile(3); also expose flags arg to python
* osx / copyfile: use path_t instead of char
* do not set dst name in the OSError exception in order to remain consistent with platforms which cannot do that (e.g. linux)
* add same file test
* add test for same file
* have osx copyfile() pre-emptively check if src and dst are the same, otherwise it will return immedialtey and src file content gets deleted
* turn PermissionError into appropriate SameFileError
* expose ERROR_SHARING_VIOLATION in order to raise more appropriate SameFileError
* honour follow_symlinks arg when using CopyFileEx
* update Misc/NEWS
* expose CreateDirectoryEx mock
* change C type
* CreateDirectoryExW actual implementation
* provide specific makedirs() implementation for win
* fix typo
* skeleton for SetNamedSecurityInfo
* get security info for src path
* finally set security attrs
* add unit tests
* mimick os.makedirs() behavior and raise if dst dir exists
* set 2 paths for OSError object
* set 2 paths for OSError object
* expand windows test
* in case of exception on os.sendfile() set filename and filename2 exception attributes
* set 2 filenames (src, dst) for OSError in case copyfile() fails on OSX
* update doc
* do not use CreateDirectoryEx() in copytree() if source dir is a symlink (breaks test_copytree_symlink_dir); instead just create a plain dir and remain consistent with POSIX implementation
* use bytearray() and readinto()
* use memoryview() with bytearray()
* refactoring + introduce a new _fastcopy_binfileobj() fun
* remove CopyFileEx and other C wrappers
* remove code related to CopyFileEx
* Recognize binary files in copyfileobj()
...and use fastest _fastcopy_binfileobj() when possible
* set 1MB copy bufsize on win; also add a global _COPY_BUFSIZE variable
* use ctx manager for memoryview()
* update doc
* remove outdated doc
* remove last CopyFileEx remnants
* OSX - use fcopyfile(3) instead of copyfile(3)
...as an extra safety measure: in case src/dst are "exotic" files (non
regular or living on a network fs etc.) we better fail on open() instead
of copyfile(3) as we're not quite sure what's gonna happen in that
case.
* update doc
The documentation for CERT_NONE, CERT_OPTIONAL, and CERT_REQUIRED were
misleading and partly wrong. It fails to explain that OpenSSL behaves
differently in client and server mode. Also OpenSSL does validate the
cert chain everytime. With SSL_VERIFY_NONE a validation error is not
fatal in client mode and does not request a client cert in server mode.
Also discourage people from using CERT_OPTIONAL in client mode.
A datetime object d is aware if d.tzinfo is not None and
d.tzinfo.utcoffset(d) does not return None. If d.tzinfo is None,
or if d.tzinfo is not None but d.tzinfo.utcoffset(d) returns None,
d is naive.
This commit ensures that instances with non-None d.tzinfo, but
d.tzinfo.utcoffset(d) returning None are treated as naive.
In addition, C acceleration code will raise TypeError if
d.tzinfo.utcoffset(d) returns an object with the type other than
timedelta.
* Updated the documentation.
Assume that the term "naive" is defined elsewhere and remove the
not entirely correct clarification. Thanks, Tim.
This call became unneeded after the posix module was converted to the
Argument Clinic in 2f93635d34 and should
have been removed as part of that change.
Move the floor() call into fbound() to call floor() on a double
rather than an int. The change should enhance the rounding.
Document also (int)double rounding mode.
For bpo-32604 I added extra subinterpreter-related tests (see #6914), which caused a few buildbots to crash. This patch fixes the crash by ensuring that refcounts in channels are handled properly.
Fix a crash in Python initialization when parsing the command line
options.
Fix memcpy() size parameter: previously, we read one wchar_t after
the end of _PyOS_optarg. Moreover, don't copy the trailingg NUL
character: we write it manually anyway.
Thanks Christoph Gohlke for the bug report and the fix!
* Failure in adding to gc.garbage is no longer fatal.
* An exception in tp_clear() no longer lead to crash (though tp_clear() should not leave exceptions).
* Fixed a leak when the GC fails to add an object with __del__ into
the gc.garbage list.
* PyGC_Collect() can now be called when an exception is set and
preserves it.
* Fixed an undefined behavior with comparing a dead pointer with NULL.
Fix the following bugs in the C implementation:
* get_future_loop() silenced all exceptions raised when look up the get_loop
attribute, not just an AttributeError.
* enter_task() silenced all exceptions raised when look up the current task,
not just a KeyError.
* repr() was called for a borrowed link in enter_task() and task_step_impl().
* str() was used instead of repr() in formatting one error message (in
Python implementation too).
* There where few reference leaks in error cases.
The ssl module now contains OP_NO_RENEGOTIATION constant, available with
OpenSSL 1.1.0h or 1.1.1.
Note, OpenSSL 1.1.0h hasn't been released yet.
Signed-off-by: Christian Heimes <christian@python.org>
* Expose the sigset_t converter via private API _Py_Sigset_Converter().
* Use Argument Clinic for parsing sigset_t in signalmodule.c.
* Raise ValueError instead OverflowError for integers out of
the C long range.
Based on patch by Pablo Galindo Salgado.
Use the _PyTime_t type and round away from zero (ROUND_UP,
_PyTime_ROUND_TIMEOUT) the sleep duration, when converting a Python
object to seconds and then to milliseconds. Raise an OverflowError in
case of overflow.
Previously the (int)double conversion rounded towards zero
(ROUND_DOWN).
METH_NOARGS functions need only a single argument but they are cast
into a PyCFunction, which takes two arguments. This triggers an
invalid function cast warning in gcc8 due to the argument mismatch.
Fix this by adding a dummy unused argument.
Starting with glibc 2.27.9000-xxx, sigaddset() can return EINVAL for some
reserved signal numbers between 1 and NSIG. The `range(1, NSIG)` idiom
is commonly used to select all signals for blocking with `pthread_sigmask`.
So we ignore the sigaddset() return value until we expose sigfillset()
to provide a better idiom.
Setup modules are no longer built with -DPy_BUILD_CORE by default,
as using that flag may now require including additional internal-only header files.
Instead, only the modules that specifically need it use that setting.
This makes performance better and produces shorter pickles. This change is backwards compatible up to the oldest currently supported version of Python (3.4).
bpo-32844: subprocess: Fix a potential misredirection of a low fd to stderr.
When redirecting, subprocess attempts to achieve the following state:
each fd to be redirected to is less than or equal to the fd
it is redirected from, which is necessary because redirection
occurs in the ascending order of destination descriptors.
It fails to do so in a couple of corner cases,
for example, if 1 is redirected to 2 and 0 is closed in the parent.
Harden ssl module against LibreSSL CVE-2018-8970.
X509_VERIFY_PARAM_set1_host() is called with an explicit namelen. A new test
ensures that NULL bytes are not allowed.
Signed-off-by: Christian Heimes <christian@python.org>
LibreSSL 2.7 introduced OpenSSL 1.1.0 API. The ssl module now detects
LibreSSL 2.7 and only provides API shims for OpenSSL < 1.1.0 and
LibreSSL < 2.7.
Documentation updates and fixes for failing tests will be provided in
another patch set.
Signed-off-by: Christian Heimes <christian@python.org>
Multi-phase initialized modules allow m_traverse to be called while the
module is still being initialized, so module authors may need to account
for that.
fstat may block for long time if the file descriptor is on a
non-responsive NFS server, hanging all threads. Most fstat() calls are
handled by _Py_fstat(), releasing the GIL internally, but but
_Py_fstat_noraise() does not release the GIL, and most calls release the
GIL explicitly around it.
This patch fixes last 2 calls to _Py_fstat_no_raise(), avoiding hangs
when calling:
- mmap.mmap()
- os.urandom()
- random.seed()
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl module now detects missing NPN support in LibreSSL.
Co-Authored-By: Bernard Spil <brnrd@FreeBSD.org>
Signed-off-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
The CPython runtime assumes that there is a one-to-one relationship (for a given interpreter) between PyThreadState and OS threads. Sending and receiving on a channel in the same interpreter was causing crashes because of this (specifically due to a check in PyThreadState_Swap()). The solution is to not switch threads if the interpreter is the same.
os.dup2() tests for dup3() system call availability at runtime,
but doesn't remember the result across calls, repeating
the test on each call with inheritable=False.
Since the caller of os.dup2() is expected to hold the GIL,
fix this by making the variable holding the test result static.
Victor Stinner
Raymond Hettinger
Serhiy Storchaka
Sergey Fedoseev
Stéphane Wirtel
Ammar Askar
erikjanss
ValeriyaSinevich
Zackery Spytz
Antoine Pitrou
INADA Naoki
Benjamin Peterson
Tal Einat
jdemeyer
Xiang Zhang
Giampaolo Rodola
Pablo Galindo
Carl Meyer
Wonsup Yoon
Eric Snow
Ned Deily
Christian Heimes
Alexander Belopolsky
pkerling
Yury Selivanov
Zvezdan Petkovic
Alex Gaynor
Segev Finer
Oren Milman
Siddhesh Poyarekar
xdegaye
Devon R
Łukasz Langa
Alexey Izbyshev
Takuya Akiba
jab
Aviv Palivoda
Marcel Plch
Antoine Pietri
Nir Soffer
Emanuele Gaifas
Steve Dower
animalize
Andrew Svetlov
Cheryl Sabella
Paul Ganssle
Ivan Levkivskyi
ngie-eign