"for <var> in <testlist> may no longer be a single test followed by
a comma. This solves SF bug #431886. Note that if the testlist
contains more than one test, a trailing comma is still allowed, for
maximum backward compatibility; but this example is not:
[(x, y) for x in range(10), for y in range(10)]
^
The fix involved creating a new nonterminal 'testlist_safe' whose
definition doesn't allow the trailing comma if there's only one test:
testlist_safe: test [(',' test)+ [',']]
This patch changes to logic to:
if env.var. set and non-empty:
if env.var. is an integer:
set flag to that integer
if flag is zero: # [actually, <= 0 --GvR]
set flag to 1
Under this patch, anyone currently using
PYTHONVERBOSE=yes will get the same output as before.
PYTHONVERBNOSE=2 will generate more verbosity than
before.
The only unusual case that the following three are
still all equivalent:
PYTHONVERBOSE=yespleas
PYTHONVERBOSE=1
PYTHONVERBOSE=0
This patch updates Python/thread_pthread.h to mask all
signals for any thread created. This will keep all
signals masked for any thread that isn't the initial
thread. For Solaris and Linux, the two platforms I was
able to test it on, it solves bug #465673 (pthreads
need signal protection) and probably will solve bug
#219772 (Interactive InterPreter+ Thread -> core dump
at exit).
I'd be great if this could get some testing on other
platforms, especially HP-UX pre 11.00 and post 11.00,
as I had to make some guesses for the DCE thread case.
AIX is also a concern as I saw some mention of using
sigthreadmask() as a pthread_sigmask() equivalent, but
this patch doesn't use sigthreadmask(). I don't have
access to AIX.
The new profiler event stream includes a "return" event even when an
exception is being propogated, but the machinery that called the profile
hook did not save & restore the exception. In debug mode, the exception
was detected during the execution of the profile callback, which did not
have the proper internal flags set for the exception. Saving & restoring
the exception state solves the problem.
The profiler does not need to know anything about the exception state,
so we no longer call it when an exception is raised. We do, however,
make sure we *always* call the profiler when we exit a frame. This
ensures that timing events are more easily isolated by a profiler and
finally clauses that do a lot of work don't have their time
mis-allocated.
When an exception is propogated out of the frame, the C callback for
the profiler now receives a PyTrace_RETURN event with an arg of NULL;
the Python-level profile hook function will see a 'return' event with
an arg of None. This means that from Python it is impossible for the
profiler to determine if the frame exited with an exception or if it
returned None, but this doesn't matter for profiling. A C-based
profiler could tell the difference, but this doesn't seem important.
ceval.c:eval_frame(): Simplify the code in two places so that the
profiler is called for every exit from a frame
and not for exceptions.
sysmodule.c:profile_trampoline(): Make sure we don't expose Python
code to NULL; use None instead.
Unknown whether this fixes it.
- stringobject.c, PyString_FromFormatV: don't assume that va_list is of
a type that can be copied via an initializer.
- errors.c, PyErr_Format: add a va_end() to balance the va_start().
If a new exception occurs while an exception instance is being
created, try harder to make sure there is a traceback. If the
original exception had a traceback associated with it and the new
exception does not, keep the old exception.
Of course, callers to PyErr_NormalizeException() must still be
prepared to have tb set to NULL.
XXX This isn't an ideal solution, but it's better than no traceback at
all. It occurs if, for example, the exception occurs when the call to
the constructor fails before any Python code is executed. Guido
suggests that it there is Python code that was about to be executed
-- but wasn't, say, because it was called with the wrong number of
arguments -- then we should point at the first line of the code object
anyway.
It's possible for PyErr_NormalizeException() to set the traceback
pointer to NULL. I'm not sure how to provoke this directly from
Python, although it may be possible. The error occurs when an
exception is set using PyErr_SetObject() and another exception occurs
while PyErr_NormalizeException() is creating the exception instance.
XXX As a result of this change, it's possible for an exception to
occur but sys.last_traceback to be left undefined. Not sure if this
is a problem.
popped frame-block. What an embarrassing bug! Especially for Jeremy, since
he accepted the patch :-)
This fixes SF bugs #463359 and #462937, and possibly other, *very* obscure
bugs with very deeply nested loops that continue the loop and then break out
of it or raise an exception.
compatibility, this required all places where an array of "struct
memberlist" structures was declared that is referenced from a type's
tp_members slot to change the type of the structure to PyMemberDef;
"struct memberlist" is now only used by old code that still calls
PyMember_Get/Set. The code in PyObject_GenericGetAttr/SetAttr now
calls the new APIs PyMember_GetOne/SetOne, which take a PyMemberDef
argument.
As examples, I added actual docstrings to the attributes of a few
types: file, complex, instance method, super, and xxsubtype.spamlist.
Also converted the symtable to new style getattr.
Renamed the 'readonly' field to 'flags' and defined some new flag
bits: READ_RESTRICTED and WRITE_RESTRICTED, as well as a shortcut
RESTRICTED that means both.
backwards compatibility. When using the class of the first base as
the metaclass, use its __class__ attribute in preference over its
ob_type slot. This ensures that we can still use classic classes as
metaclasse, as shown in the original "Metaclasses" essay. This also
makes all the examples in Demo/metaclasses/ work again (maybe these
should be turned into a test suite?).
parameter for the return string (as unix pathnames are not limited
by the 255 char pstring limit).
Implemented the function for MachO-Python, where it returns unix pathnames.
by bbrox@bbrox.org / lionel.ulmer@free.fr.
This adds a configure check and if all goes well turns on the
PTHREAD_SCOPE_SYSTEM thread attribute for new threads.
This should remove the need to add tiny sleeps at the start of threads
to allow other threads to be scheduled.
Reported by Fredrik Lundh on python-dev.
The conversimple() code that handles Unicode arguments and converts
them to the default encoding now calls converterr() with the original
Unicode argument instead of the NULL returned by the failed encoding
attempt.
com_factor(): when a unary minus is attached to a float or imaginary zero,
don't optimize the UNARY_MINUS opcode away: the const dict can't
distinguish between +0.0 and -0.0, so ended up treating both like the
first one added to it. Optimizing UNARY_PLUS away isn't a problem.
(BTW, I already uploaded the 2.2a3 Windows installer, and this isn't
important enough to delay the release.)
of PyMapping_Keys because we know we have a real dict. Tolerate that
objects may have an attr named "__dict__" that's not a dict (Py_None
popped up during testing).
test_descr.py, test_dir(): Test the new classic-class behavior; beef up
the new-style class test similarly.
test_pyclbr.py, checkModule(): dir(C) is no longer a synonym for
C.__dict__.keys() when C is a classic class (looks like the same thing
that burned distutils! -- should it be *made* a synoym again? Then it
would be inconsistent with new-style class behavior.).
bag. It's clearly wrong for classic classes, at heart because a classic
class doesn't have a __class__ attribute, and I'm unclear on whether
that's feature or bug. I'll repair this once I find out (in the
meantime, dir() applied to classic classes won't find the base classes,
while dir() applied to a classic-class instance *will* find the base
classes but not *their* base classes).
Please give the new dir() a try and see whether you love it or hate it.
The new dir([]) behavior is something I could come to love. Here's
something to hate:
>>> class C:
... pass
...
>>> c = C()
>>> dir(c)
['__doc__', '__module__']
>>>
The idea that an instance has a __doc__ attribute is jarring (of course
it's really c.__class__.__doc__ == C.__doc__; likewise for __module__).
OTOH, the code already has too many special cases, and dir(x) doesn't
have a compelling or clear purpose when x isn't a module.
PEP 238. Changes:
- add a new flag variable Py_DivisionWarningFlag, declared in
pydebug.h, defined in object.c, set in main.c, and used in
{int,long,float,complex}object.c. When this flag is set, the
classic division operator issues a DeprecationWarning message.
- add a new API PyRun_SimpleStringFlags() to match
PyRun_SimpleString(). The main() function calls this so that
commands run with -c can also benefit from -Dnew.
- While I was at it, I changed the usage message in main() somewhat:
alphabetized the options, split it in *four* parts to fit in under
512 bytes (not that I still believe this is necessary -- doc strings
elsewhere are much longer), and perhaps most visibly, don't display
the full list of options on each command line error. Instead, the
full list is only displayed when -h is used, and otherwise a brief
reminder of -h is displayed. When -h is used, write to stdout so
that you can do `python -h | more'.
Notes:
- I don't want to use the -W option to control whether the classic
division warning is issued or not, because the machinery to decide
whether to display the warning or not is very expensive (it involves
calling into the warnings.py module). You can use -Werror to turn
the warnings into exceptions though.
- The -Dnew option doesn't select future division for all of the
program -- only for the __main__ module. I don't know if I'll ever
change this -- it would require changes to the .pyc file magic
number to do it right, and a more global notion of compiler flags.
- You can usefully combine -Dwarn and -Dnew: this gives the __main__
module new division, and warns about classic division everywhere
else.
pyport.h: typedef a new Py_intptr_t type.
DELICATE ASSUMPTION: That HAVE_UINTPTR_T implies intptr_t is
available as well as uintptr_t. If that turns out not to be
true, things must get uglier (C99 wants both, so I think it's
an assumption we're *likely* to get away with).
thread_nt.h, PyThread_start_new_thread: MS _beginthread is documented
as returning unsigned long; no idea why uintptr_t was being used.
Others: Always use Py_[u]intptr_t, never [u]intptr_t directly.
Check return value from future_parse() in for loop for file_input to
accomodate multiple future statements on separate lines.
Add several comments explaining how the code works.
Remove out-dated XXX comment.
Change to get/set/del slice operations so that if the object doesn't
support slicing, *or* if either of the slice arguments is not an int
or long, we construct a slice object and call the get/set/del item
operation instead. This makes it possible to design classes that
support slice arguments of non-integral types.
builtin_eval wasn't merging in the compiler flags from the current frame;
I suppose we never noticed this before because future division is the
first future-feature that can affect expressions (nested_scopes and
generators had only statement-level effects).
CO_FUTURE_DIVISION flag. Redid this to use Jeremy's PyCF_MASK #define
instead, so we dont have to remember to fiddle individual feature names
here again.
pythonrun.h: Also #define a PyCF_MASK_OBSOLETE mask. This isn't used
yet, but will be as part of the PEP 264 implementation (compile() mustn't
raise an error just because old code uses a flag name that's become
obsolete; a warning may be appropriate, but not an error; so compile() has
to know about obsolete flags too, but nobody is going to remember to
update compile() with individual obsolete flag names across releases either
-- i.e., this is the flip side of PyEval_MergeCompilerFlags's oversight).
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
When code is compiled and compiler flags are passed in, be sure to
update cf_flags with any features defined by future statements in the
compiled code.
_PyImport_FixupExtension() on the exceptions module. Now
reload(exceptions) acts just like reload(sys) instead of raising
an ImportError.
This closes SF bug #422004.
The descr changes moved the dispatch for calling objects from
call_object() in ceval.c to PyObject_Call() in abstract.c.
call_object() and the many functions it used in ceval.c were no longer
used, but were not removed.
Rename meth_call() as PyCFunction_Call() so that it can be called by
the CALL_FUNCTION opcode in ceval.c.
Also, fix error message that referred to PyEval_EvalCodeEx() by its
old name eval_code2(). (I'll probably refer to it by its old name,
too.)
Revised version of Fred's patch, including support for ~ operator.
If the unary +, -, or ~ operator is applied to a constant, don't
generate a UNARY_xxx opcode. Just store the approriate value as a
constant. If the value is negative, extend the string containing the
constant and insert a negative in the 0th position.
For ~, compute the inverse of int and longs and use them directly, but
be prepared to generate code for all other possibilities (invalid
numbers, floats, complex).
same module twice, which apparently crashes Python. I could not test the
error condition, but in normal life it seems to have no adverse effects.
Also removed an unsued variable, and corrected 2 glaring errors (missing
'case' in front of a label).
Replace uses of PyCF_xxx with CO_xxx.
Replace individual feature slots in PyFutureFeatures with single
bitmask ff_features.
When flags must be transfered among the three parts of the interpreter
that care about them -- the pythonrun layer, the compiler, and the
future feature parser -- can simply or (|) the definitions.
with functionality needed for both unix-Python and MacPython and a
new smaller ./Mac/Python/macglue.c which contains MacPython stuff only.
pymactoolbox.h has moved to ./Include from ./Mac/Include and now also
contains the relevant stuff from macglue.h.
The net effect of this is that the ./Mac subdirectory is not needed
anymore for building the unix-Python core on MacOSX (it is needed
for building the extension modules).
This introduces:
- A new operator // that means floor division (the kind of division
where 1/2 is 0).
- The "future division" statement ("from __future__ import division)
which changes the meaning of the / operator to implement "true
division" (where 1/2 is 0.5).
- New overloadable operators __truediv__ and __floordiv__.
- New slots in the PyNumberMethods struct for true and floor division,
new abstract APIs for them, new opcodes, and so on.
I emphasize that without the future division statement, the semantics
of / will remain unchanged until Python 3.0.
Not yet implemented are warnings (default off) when / is used with int
or long arguments.
This has been on display since 7/31 as SF patch #443474.
Flames to /dev/null.
- Add an explicit call to PyType_Ready(&PyList_Type) to pythonrun.c
(just for the heck of it, really -- we should either explicitly
ready all types, or none).
Python warning which can be catched by means of the Python warning
framework.
It also adds two new APIs which hopefully make it easier for Python
to switch to buffer overflow safe [v]snprintf() APIs for error
reporting et al. The two new APIs are PyOS_snprintf() and
PyOS_vsnprintf() and work just like the standard ones in many
C libs. On platforms which have snprintf(), the native APIs are used,
on all other an emulation with snprintf() tries to do its best.
Fix suggested by Michael Hudson: Raise TypeError if attribute name
passed to getattr() is not a string or Unicode. There is some
unfortunate duplication of code between builtin_getattr() and
PyObject_GetAttr(), but it appears to be unavoidable.
And remove all the extern decls in the middle of .c files.
Apparently, it was excluded from the header file because it is
intended for internal use by the interpreter. It's still intended for
internal use and documented as such in the header file.
exception in the execution of bar, ensure that foo.bar exists.
(Previously, while sys.modules['foo.bar'] would exist, foo.bar would
only be created upon successful execution of bar. This is
inconvenient; some would say wrong. :-)
that 'yield' is a keyword. This doesn't help test_generators at all! I
don't know why not. These things do work now (and didn't before this
patch):
1. "from __future__ import generators" now works in a native shell.
2. Similarly "python -i xxx.py" now has generators enabled in the
shell if xxx.py had them enabled.
3. This program (which was my doctest proxy) works fine:
from __future__ import generators
source = """\
def f():
yield 1
"""
exec compile(source, "", "single") in globals()
print type(f())
that info to code dynamically compiled *by* code compiled with generators
enabled. Doesn't yet work because there's still no way to tell the parser
that "yield" is OK (unlike nested_scopes, the parser has its fingers in
this too).
Replaced PyEval_GetNestedScopes by a more-general
PyEval_MergeCompilerFlags. Perhaps I should not have? I doubted it was
*intended* to be part of the public API, so just did.
the yield statement. I figure we have to have this in before I can
release 2.2a1 on Wednesday.
Note: test_generators is currently broken, I'm counting on Tim to fix
this.
Probable fix (the bug report doesn't have enough info to say for sure).
find_init_module(): Insist on a case-sensitive match for __init__ files.
Given __INIT__.PY instead, find_init_module() thought that was fine, but
the later attempt to do find_module("__INIT__.PY") didn't and its caller
silently suppressed the resulting ImportError. Now find_init_module()
refuses to accept __INIT__.PY to begin with.
Bugfix candidate; specific to platforms with case-insensitive filesystems.
path (with no profile/trace function) through eval_code2() and
eval_frame() avoids several checks.
In the common cases of calls, returns, and exception propogation,
eval_code2() and eval_frame() used to test two values in the
thread-state: the profiling function and the tracing function. With
this change, a flag is set in the thread-state if either of these is
active, allowing a single check to suffice when both are NULL. This
also simplifies the code needed when either function is in use but is
already active (to avoid profiling/tracing the profiler/tracer); the
flag is set to 0 when the profile/trace code is entered, allowing the
same check to suffice for "already in the tracer" for call/return/
exception events.
"return expr" instances in generators (which latter may be generators
due to otherwise invisible "yield" stmts hiding in "if 0" blocks).
This was fun the first time, but this has gotten truly ugly now.
Python interpreter.
This change adds two new C-level APIs: PyEval_SetProfile() and
PyEval_SetTrace(). These can be used to install profile and trace
functions implemented in C, which can operate at much higher speeds
than Python-based functions. The overhead for calling a C-based
profile function is a very small fraction of a percent of the overhead
involved in calling a Python-based function.
The machinery required to call a Python-based profile or trace
function been moved to sysmodule.c, where sys.setprofile() and
sys.setprofile() simply become users of the new interface.
As a side effect, SF bug #436058 is fixed; there is no longer a
_PyTrace_Init() function to declare.
Implement sys.maxunicode.
Explicitly wrap around upper/lower computations for wide Py_UNICODE.
When decoding large characters with UTF-8, represent expected test
results using the \U notation.
- the correct range for the error message is range(0x110000);
- put the 4-byte Unicode-size code inside the same else branch as the
2-byte code, rather generating unreachable code in the 2-byte case.
- Don't hide the 'else' behine the '}'.
(I would prefer that in 4-byte mode, any value should be accepted, but
reasonable people can argue about that, so I'll put that off.)
Add configure option --enable-unicode.
Add config.h macros Py_USING_UNICODE, PY_UNICODE_TYPE, Py_UNICODE_SIZE,
SIZEOF_WCHAR_T.
Define Py_UCS2.
Encode and decode large UTF-8 characters into single Py_UNICODE values
for wide Unicode types; likewise for UTF-16.
Remove test whether sizeof Py_UNICODE is two.
Iterators list and Python-Dev; e.g., these all pass now:
def g1():
try:
return
except:
yield 1
assert list(g1()) == []
def g2():
try:
return
finally:
yield 1
assert list(g2()) == [1]
def g3():
for i in range(3):
yield None
yield None
assert list(g3()) == [None] * 4
compile.c: compile_funcdef and com_return_stmt: Just van Rossum's patch
to compile the same code for "return" regardless of function type (this
goes back to the previous scheme of returning Py_None).
ceval.c: gen_iternext: take a return (but not a yield) of Py_None as
meaning the generator is exhausted.
the next free valuestack slot, not to the base (in America, stacks push
and pop at the top -- they mutate at the bottom in Australia <winK>).
eval_frame(): assert that f_stacktop isn't NULL upon entry.
frame_delloc(): avoid ordered pointer comparisons involving f_stacktop
when f_stacktop is NULL.
reference to f_back when its really needed. Do a little whitespace
normalization as well. This whole file is a big war between tabs and spaces
but now is probably not the time to reindent everything.
NeilS, please check! This came from staring at your genbug.py, but I'm
not sure it plugs all possible holes. Without this, I caught a
frameobject refcount going negative, and it was also the cause (in debug
build) of _Py_ForgetReference's attempt to forget an object with already-
NULL _ob_prev and _ob_next pointers -- although I'm still not entirely
sure how! Part of the difficulty is that frameobjects are stored on a
free list that gets recycled very quickly, so if there's a stray pointer
to one of them it never looks like an insane frameobject (never goes
trough the free() mangling MS debug forces, etc).
and trace functions lazily, which incurs extra argument pushing and checks
in the C overhead for profiling/tracing, create the strings semi-lazily
when the Python code first registers a profile or trace function. This
simplifies the trampoline into the profile/trace functions.
Armin Rigo pointed out that the way the line-# table got built didn't work
for lines generating more than 255 bytes of bytecode. Fixed as he
suggested, plus corresponding changes to pyassem.py, plus added some
long overdue docs about this subtle table to compile.c.
Bugfix candidate (line numbers may be off in tracebacks under -O).
that should be used to cache an interned version of the event
string passed to the profile/trace function. call_trace() will
create interned strings and cache them in using the storage
specified by this additional parameter, avoiding a lot of string
object creation at runtime when using the profiling or tracing
functions.
All call sites are modified to pass the additional parameter, and four
static PyObject* variables are allocated to cache the interned string
objects.
This closes SF patch #431257.
in release builds. Suggested by Martin v. Loewis.
I'm half tempted to macroize PyErr_Occurred too, as the whole thing could
collapse to just
_PyThreadState_Current->curexc_type
In the default branch, keep three ifs that are used if level == 0, the
most common case. Note that first if here is a slight optimization
for the 'O' format.
Second part of SF patch 426072.
Note that lots of code was re-indented.
Replace two-step of convertsimple() and convertsimple1() with
convertsimple() and helper converterr(), which is called to format
error messages when convertsimple() fails. The old code did all the
real work in convertsimple1(), but deferred error message formatting
to conversimple(). The result was paying the price of a second
function call on every call just to format error messages in the
failure cases.
Factor out of the buffer-handling code in convertsimple() and package
it as convertbuffer().
Add two macros to ease readability of Unicode coversions,
UNICODE_DEFAULT_ENCODING() and CONV_UNICODE, an error string.
The convertsimple() routine had awful indentation problems, primarily
because there were two tabs between the case line and the body of the
case statements. This patch reformats the entire function to have a
single tab between case line and case body, which makes the code
easier to read (and consistent with ceval). The introduction of
converterr() exacerbated the problem and prompted this fix.
Also, eliminate non-standard whitespace after opening paren and before
closing paren in a few if statements.
(This checkin is part of SF patch 426072.)
Keyword arguments passed to builtin functions that don't take them are
ignored.
>>> {}.clear(x=2)
>>>
instead of
>>> {}.clear(x=2)
Traceback (most recent call last):
File "<stdin>", line 1, in ?
TypeError: clear() takes no keyword arguments
Jeremy Hylton
Skip Montanaro
Guido van Rossum
Martin v. Löwis
Fred Drake
Tim Peters
Greg Ward
Thomas Wouters
Jack Jansen
Neil Schemenauer
Michael W. Hudson
Sjoerd Mullender
Barry Warsaw
Marc-André Lemburg
Moshe Zadka
Fredrik Lundh