svn+ssh://pythondev@svn.python.org/python/trunk
........
r74139 | benjamin.peterson | 2009-07-21 09:08:40 -0500 (Tue, 21 Jul 2009) | 1 line
must use _PyThreadState_Current so it isn't checked for NULL #6530
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73750 | benjamin.peterson | 2009-07-01 19:45:19 -0400 (Wed, 01 Jul 2009) | 1 line
small optimization: avoid popping the current block until we have to
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r72487 | jeffrey.yasskin | 2009-05-08 17:51:06 -0400 (Fri, 08 May 2009) | 7 lines
PyCode_NewEmpty:
Most uses of PyCode_New found by http://www.google.com/codesearch?q=PyCode_New
are trying to build an empty code object, usually to put it in a dummy frame
object. This patch adds a PyCode_NewEmpty wrapper which lets the user specify
just the filename, function name, and first line number, instead of also
requiring lots of code internals.
........
r72488 | jeffrey.yasskin | 2009-05-08 18:23:21 -0400 (Fri, 08 May 2009) | 13 lines
Issue 5954, PyFrame_GetLineNumber:
Most uses of PyCode_Addr2Line
(http://www.google.com/codesearch?q=PyCode_Addr2Line) are just trying to get
the line number of a specified frame, but there's no way to do that directly.
Forcing people to go through the code object makes them know more about the
guts of the interpreter than they should need.
The remaining uses of PyCode_Addr2Line seem to be getting the line from a
traceback (for example,
http://www.google.com/codesearch/p?hl=en#u_9_nDrchrw/pygame-1.7.1release/src/base.c&q=PyCode_Addr2Line),
which is replaced by the tb_lineno field. So we may be able to deprecate
PyCode_Addr2Line entirely for external use.
........
r72879 | jeffrey.yasskin | 2009-05-23 19:23:01 -0400 (Sat, 23 May 2009) | 14 lines
Issue #6042:
lnotab-based tracing is very complicated and isn't documented very well. There
were at least 3 comment blocks purporting to document co_lnotab, and none did a
very good job. This patch unifies them into Objects/lnotab_notes.txt which
tries to completely capture the current state of affairs.
I also discovered that we've attached 2 layers of patches to the basic tracing
scheme. The first layer avoids jumping to instructions that don't start a line,
to avoid problems in if statements and while loops. The second layer
discovered that jumps backward do need to trace at instructions that don't
start a line, so it added extra lnotab entries for 'while' and 'for' loops, and
added a special case for backward jumps within the same line. I replaced these
patches by just treating forward and backward jumps differently.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73706 | georg.brandl | 2009-06-30 12:18:55 -0400 (Tue, 30 Jun 2009) | 1 line
#6384: Add a heading for the exception hierarchy.
........
r73778 | r.david.murray | 2009-07-02 14:19:20 -0400 (Thu, 02 Jul 2009) | 3 lines
Issue 6389: add documentation for the 'mode' flags defined in the
stat module.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73871 | alexandre.vassalotti | 2009-07-06 22:17:30 -0400 (Mon, 06 Jul 2009) | 7 lines
Grow the allocated buffer in PyUnicode_EncodeUTF7 to avoid buffer overrun.
Without this change, test_unicode.UnicodeTest.test_codecs_utf7 crashes in
debug mode. What happens is the unicode string u'\U000abcde' with a length
of 1 encodes to the string '+2m/c3g-' of length 8. Since only 5 bytes is
reserved in the buffer, a buffer overrun occurs.
........
........
r74119 | benjamin.peterson | 2009-07-20 15:28:08 -0500 (Mon, 20 Jul 2009) | 2 lines
the Slice in x[::] has to have step as None to help the interpreter
........
importlib.abc.ExecutionLoader. PyLoader now inherits from this ABC instead of
InspectLoader directly. Both PyLoader and PyPycLoader provide concrete
implementations of get_filename in terms of source_path and bytecode_path.
importlib.abc.ResourceLoader, when in fact it did not. Fixed the ABC to inherit
as documented.
This doesn't introduce an backwards-incompatiblity as the code in PyLoader
already required the single method ResourceLoader defined as an abstract
method.
when a loader is given missing or bad code object bytecode. Unfortunately an
exception related to source paths was masking what the proper exception to test
should be. Making the test explicitly set the environment fixed the test.
The code being test was not affected.
svn+ssh://pythondev@svn.python.org/python/trunk
........
r74083 | mark.dickinson | 2009-07-18 17:01:57 +0100 (Sat, 18 Jul 2009) | 1 line
Add Case Van Horsen to Misc/ACKS, for fractions module patches and other work
........
the Fraction type doesn't know how to handle the comparison without
loss of accuracy. Also, make sure that comparisons between Fractions
and float infinities or nans do the right thing.
svn+ssh://pythondev@svn.python.org/python/trunk
........
r74072 | alexandre.vassalotti | 2009-07-17 20:31:06 -0400 (Fri, 17 Jul 2009) | 5 lines
Add a check to ensure the correct autoconf version is used
for generating the configure script.
Original idea by Martin von Löwis.
........
........
r73819 | kristjan.jonsson | 2009-07-03 19:07:07 -0400 (Fri, 03 Jul 2009) | 2 lines
http://bugs.python.org/issue6381
some platforms may raise ENOTCONN if the stack has disconnected the socket on behalf of the peer.
........
r73821 | kristjan.jonsson | 2009-07-03 19:26:02 -0400 (Fri, 03 Jul 2009) | 2 lines
http://bugs.python.org/issue6267
Incorrect exception handling for xmlrp client retry
........
r73822 | kristjan.jonsson | 2009-07-03 19:29:50 -0400 (Fri, 03 Jul 2009) | 2 lines
http://bugs.python.org/issue6267
Incorrect exception handling for xmlrpc client retry
........
r73863 | kristjan.jonsson | 2009-07-05 16:56:57 -0400 (Sun, 05 Jul 2009) | 2 lines
http://bugs.python.org/issue6382
close_request() (which can send a socket.shutdown()) must be called by the child process in a forking server. The parent must merely close the socket handle.
........
r73877 | kristjan.jonsson | 2009-07-07 05:01:34 -0400 (Tue, 07 Jul 2009) | 2 lines
http://bugs.python.org/issue6382
added the shutdown_request() which can perform shutdown before calling close. This is needed for the ForkingMixIn because different close semantics are required for child and parent process. shutdown_request(), for TCP servers, calls socket.shutdown() and then calls close_request(). Therefore, this is not an backwards incompatible change, since subclasses that continue to override close_request() continue to work.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73870 | r.david.murray | 2009-07-06 21:06:13 -0400 (Mon, 06 Jul 2009) | 5 lines
Issue 6070: when creating a compiled file, after copying the mode bits, on
posix zap the execute bit in case it was set on the .py file, since the
compiled files are not directly executable on posix. Patch by Marco N.
........
r73879 | r.david.murray | 2009-07-07 05:54:16 -0400 (Tue, 07 Jul 2009) | 3 lines
Update issue 6070 patch to match the patch that was actually tested
on Windows.
........
r73899 | r.david.murray | 2009-07-08 21:43:41 -0400 (Wed, 08 Jul 2009) | 3 lines
Conditionalize test cleanup code to eliminate traceback, which will
hopefully reveal the real problem.
........
r73900 | r.david.murray | 2009-07-08 22:06:17 -0400 (Wed, 08 Jul 2009) | 2 lines
Make test work with -O.
........
r73905 | r.david.murray | 2009-07-09 09:55:44 -0400 (Thu, 09 Jul 2009) | 3 lines
Specify umask in execute bit test to get consistent results
and make sure we test resetting all three execute bits.
........
r73906 | r.david.murray | 2009-07-09 11:35:33 -0400 (Thu, 09 Jul 2009) | 5 lines
Curdir needs to be in the path for the test to work on all buildbots.
(I copied this from another import test, but currently this will fail if
TESTFN ends up in /tmp...see issue 2609).
........
Ezio Melotti
Benjamin Peterson
Alexandre Vassalotti
Brett Cannon
R. David Murray
Kristján Valur Jónsson
Georg Brandl
Senthil Kumaran
Mark Dickinson