Expose the CAN_BCM SocketCAN constants used in the bcm_msg_head struct
flags (provided by <linux/can/bcm.h>) under the socket library.
This adds the following constants with a CAN_BCM prefix:
* SETTIMER
* STARTTIMER
* TX_COUNTEVT
* TX_ANNOUNCE
* TX_CP_CAN_ID
* RX_FILTER_ID
* RX_CHECK_DLC
* RX_NO_AUTOTIMER
* RX_ANNOUNCE_RESUME
* TX_RESET_MULTI_IDX
* RX_RTR_FRAME
* CAN_FD_FRAME
The CAN_FD_FRAME flag was introduced in the 4.8 kernel, while the other
ones were present since SocketCAN drivers were mainlined in 2.6.25. As
such, it is probably unnecessary to guard against these constants being
missing.
(cherry picked from commit 31c4fd2a10)
Co-authored-by: karl ding <karlding@users.noreply.github.com>
* use platform.system() as runtime test, rather than sys.platform() build-time test
* IPv6 zone id support on AIX is limited to inet_pton6_zone(), so skip related
getaddrinfo() and getnameinfo() tests as not supported
The length check for AF_ALG salg_name and salg_type had a off-by-one
error. The code assumed that both values are not necessarily NULL
terminated. However the Kernel code for alg_bind() ensures that the last
byte of both strings are NULL terminated.
Signed-off-by: Christian Heimes <christian@python.org>
* Replace testInheritFlags() with two tests:
testInheritFlagsBlocking() and testInheritFlagsTimeout()
to test different default socket timeout. Moreover, the test now
checks sock.gettimeout() rather than a functional test on recv().
* Replace time.time() with time.monotonic()
* Add socket_setdefaulttimeout() context manager to restore the
default timeout when the test completes.
* Remove testConnect(): accept() wasn't blocking and testAccept()
already tests non-blocking accept().
* Remove accept() functional test from testInitNonBlocking():
already tested by testAccept()
* Rewrite testSetBlocking() with a new assert_sock_timeout() method
* Use addCleanup() and context manager to close sockets
* Replace assertTrue(x < y) with assertLess(x, y)
testAccept() and testRecv() of test_socket.NonBlockingTCPTests have a
race condition: time.sleep() is used as a weak synchronization
primitive and the tests fail randomly on slow buildbots.
Use a reliable threading.Event to fix these tests.
Other changes:
* Replace send() with sendall()
* Expect specific BlockingIOError rather than generic OSError
* Add a timeout to select() in testAccept() and testRecv()
* Use addCleanup() to close sockets
* Use assertRaises()
After some failures in AMD64 FreeBSD CURRENT Debug 3.x buildbots
regarding tests in test_socket that are using
testFDPassSeparateMinSpace(), FreeBDS revision 337423 was pointed
out to be the reason the test started to fail.
A close examination of the manpage for cmsg_space(3) reveals that
the number of file descriptors needs to be taken into account when
using CMSG_LEN().
This commit fixes tests in test_socket to use correctly CMSG_LEN, taking
into account the number of FDs.
The test tries to fill the receiver's socket buffer and expects an
error. But the RDS protocol doesn't require that. Moreover, the Linux
implementation of RDS expects that the producer of the messages
reduces its rate, it's not the role of the receiver to trigger an
error.
The test fails on Fedora 28 by design, so remove it.
* Add support.MS_WINDOWS: True if Python is running on Microsoft Windows.
* Add support.MACOS: True if Python is running on Apple macOS.
* Replace support.is_android with support.ANDROID
* Replace support.is_jython with support.JYTHON
* Cleanup code to initialize unix_shell
Fix socket(fileno=fd) by auto-detecting the socket's family, type,
and proto from the file descriptor. The auto-detection can be overruled
by passing in family, type, and proto explicitly.
Without the fix, all socket except for TCP/IP over IPv4 are basically broken:
>>> s = socket.create_connection(('www.python.org', 443))
>>> s
<socket.socket fd=3, family=AddressFamily.AF_INET6, type=SocketKind.SOCK_STREAM, proto=6, laddr=('2003:58:bc4a:3b00:56ee:75ff:fe47:ca7b', 59730, 0, 0), raddr=('2a04:4e42:1b::223', 443, 0, 0)>
>>> socket.socket(fileno=s.fileno())
<socket.socket fd=3, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('2003:58:bc4a:3b00::%2550471192', 59730, 0, 2550471192), raddr=('2a04:4e42:1b:0:700c:e70b:ff7f:0%2550471192', 443, 0, 2550471192)>
Signed-off-by: Christian Heimes <christian@python.org>
* Fix multiple typos in code comments
* Add spacing in comments (test_logging.py, test_math.py)
* Fix spaces at the beginning of comments in test_logging.py
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.
Same change for MB and GB which become MiB and GiB.
Change the output of Tools/iobench/iobench.py.
Round also the size of the documentation from 5.5 MB to 5 MiB.
* bpo-31479: Always reset the signal alarm in tests
Use "try: ... finally: signal.signal(0)" pattern to make sure that
tests don't "leak" a pending fatal signal alarm.
* Move two more alarm() calls into the try block
Fix also typo: replace signal.signal(0) with signal.alarm(0)
* Move another signal.alarm() into the try block
test.support.HOST should be "localhost" as it was in the past. See the bpo-29639.
Tests that need the IP address should use HOSTv4 (added) or the existing HOSTv6 constant.
This changes the definition and fixes tests that needed updating to deal with HOST being
the hostname rather than the hardcoded IP address.
This is only the first step in addressing https://bugs.python.org/issue29639.
* bpo-27584: New addition of vSockets to the python socket module
Support for AF_VSOCK on Linux only
* bpo-27584: Fixes for V2
Fixed syntax and naming problems.
Fixed #ifdef AF_VSOCK checking
Restored original aclocal.m4
* bpo-27584: Fixes for V3
Added checking for fcntl and thread modules.
* bpo-27584: Fixes for V4
Fixed white space error
* bpo-27584: Fixes for V5
Added back comma in (CID, port).
* bpo-27584: Fixes for V6
Added news file.
socket.rst now reflects first Linux introduction of AF_VSOCK.
Fixed get_cid in test_socket.py.
Replaced PyLong_FromLong with PyLong_FromUnsignedLong in socketmodule.c
Got rid of extra AF_VSOCK #define.
Added sockaddr_vm to sock_addr.
* bpo-27584: Fixes for V7
Minor cleanup.
* bpo-27584: Fixes for V8
Put back #undef AF_VSOCK as it is necessary when vm_sockets.h is not installed.
* Added support for CAN_ISOTP protocol
* Added unit tests for CAN ISOTP
* Updated documentation for ISO-TP protocol
* Removed trailing whitespace in documentation
* Added blurb NEWS.d file
* updated Misc/ACKS
* Fixed broken unit test that was using isotp const outside of skippable section
* Removed dependecy over third party project
* Added implementation for getsockname + unit tests
* Missing newline at end of ACKS file
* Accidentally inserted a type in ACKS file
* Followed tiran changes review #1 recommendations
* Added spaces after comma
* bpo-29972: Fix test_eintr on AIX
On AIX, sigtimedwait(0.2) sleeps 199.8 ms, whereas the test expects
200 ms or longer.
* bpo-29972: Skip some inet_pton() tests on AIX
Skip some inet_pton() tests of test_socket on AIX.
inet_pton() on AIX is less strict than on Linux and doesn't reject
some invalid IP addresses. The unit tests test more the libc than
Python itself.
* bpo-29972: Skip tests known to fail on AIX
* test_locale.test_strcoll_with_diacritic()
* test_locale.test_strxfrm_with_diacritic()
* test_strptime.test_week_of_year_and_day_of_week_calculation()
* test_tools.test_POT_Creation_Date()
Miss Islington (bot)
Zackery Spytz
xdegaye
Victor Stinner
Giampaolo Rodola
Serhiy Storchaka
Joannah Nanjekye
Pablo Galindo
Michael Felt
Dima Tisnek
Christian Heimes
Bjorn Andersson
Sergey Fedoseev
Barry Warsaw
Ville Skyttä
animalize
Коренберг Марк
Yury Selivanov
Victor Stinner
Mike
luzpaz
Gregory P. Smith
Antoine Pitrou
caavery
Pier-Yves Lessard