and a couple of functions that were missed in the previous batches. Not
terribly tested, but very carefully scrutinized, three times.
All these were found by the little findkrc.py that I posted to python-dev,
which means there might be more lurking. Cases such as this:
long
func(a, b)
long a;
long b; /* flagword */
{
and other cases where the last ; in the argument list isn't followed by a
newline and an opening curly bracket. Regexps to catch all are welcome, of
course ;)
This patch fixes possible overflows in the socket module for 64-bit
platforms (mainly Win64). The changes are:
- abstract the socket type to SOCKET_T (this is SOCKET on Windows, int
on Un*x), this is necessary because sizeof(SOCKET) > sizeof(int) on
Win64
- use INVALID_SOCKET on Win32/64 for an error return value for
accept()
- ensure no overflow of the socket variable for: (1) a PyObject return
value (use PyLong_FromLongLong if necessary); and (2) printf
formatting in repr().
Closes SourceForge patch #100516.
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.
(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode. I'm also holding back on his
change to main.c, which seems unnecessary to me.)
socklen_t (unsigned int) for most size parameters. Apparently this is
part of the UNIX 98 standard.
[GvR: the changes to configure.in etc. that I just checked in make
sure that socklen_t is defined everywhere, so I deleted the little
part of Jack's mod to define socklen_t if not in GUSI2. I suppose I
will have to add it to the Windows config.h in a minute.]
Windows), soclose (on OS2), or to close (everywhere else).
Hopefully this fixes a new compilation error that I suddenly get on
Windows because the macro definition for close -> closesocket
apparently was done before including io.h, which contains a prototype
for close. (No idea why this wasn't an error before.)
Brian E Gallew, which were improved and adapted to OpenSSL 0.9.4 by
Laszlo Kovacs of HP. Both have kindly given permission to include
the patches in the Python distribution. Final formatting by GvR.
the right variant of gethostbyname_r for us, since not all Linuxes are
equal in this respect. Reported by Laurent Pointal.
(2) On BeOS, Chris Herborth reports that instead of arpa/inet.h you
must include net/netdb.h to get the inet_ntoa() and inet_addr()
prototypes.
data struct before calling gethostby{name,addr}_r(); (2) ignore the
3/5/6 args determinations made by the configure script and switch on
platform identifiers instead:
AIX, OSF have 3 args
Sun, SGI have 5 args
Linux has 6 args
On all other platforms, undef HAVE_GETHOSTBYNAME_R altogether.
- Use HAVE_GETHOSTBYNAME_R_6_ARG instead of testing for Linux and
glibc2.
- If gethostbyname takes 3 args, undefine HAVE_GETHOSTBYNAME_R --
don't know what code should be used.
- New symbol USE_GETHOSTBYNAME_LOCK defined iff the lock should be used.
- Modify the gethostbyaddr() code to also hold on to the lock until
after it is safe to release, overlapping with the Python lock.
(Note: I think that it could in theory be possible that Python code
executed while gethostbyname_lock is held could attempt to reacquire
the lock -- e.g. in a signal handler or destructor. I will simply say
"don't do that then.")
Here's a patch to fix the race condition, which wasn't fixed by Rob's
patch. It holds the gethostbyname lock until the results are copied out,
which means that this lock and the Python global lock are held at the same
time. This shouldn't be a problem as long as the gethostbyname lock is
always acquired when the global lock is not held.
gethostbyaddr(). (Plain gethostbyname() returns only the IP address.)
This moves the code shared by gethostbyaddr() and gethostbyname_ex()
to a subroutine.
Original patch by Dan Stromberg; some tweaks by GvR.
so that our #ifdef test has the wrong effect. Substitute hardcoded
values for some important symbols (but not for the whole range -- some
are pretty obscure so it's not worth it).
(1) Use PyErr_NewException("module.class", NULL, NULL) to create the
exception object.
(2) Remove all calls to Py_FatalError(); instead, return or
ignore the errors -- the import code now checks PyErr_Occurred()
after calling a module's init function, so it's no longer a
fatal error for the initialization to fail.
Also did some small cleanups, e.g. removed unnecessary test for
"already initialized" from initfpectl(), and unified
initposix()/initnt().
I haven't checked this very thoroughly, so while the changes are
pretty trivial -- beware of untested code!
that the module-specific components are in the section for that
module.
cursesmodule.c: patched it so it actually works.
tkintermodule.c: call Py_AtExit instead of atexit().
signalmodule.c: converted to new naming style; added
BGN/END SAVE around pause() call.
socketmodule.c: added setblocking() after Tommy Burnette.
shorter names (dropped the "module" from the name): sunaudiodev,
imgformat, audioop, imageop, imgfile
* Modules/stropmodule.c (strop_rindex): make rindex('abc', '') do
the right thing (i.e. return 3 instead of 0)
* Modules/socketmodule.c: disabled allowbroadcast() socket method
* posixmodule.c: don't prototype getcwd() -- it's not portable...
* mappingobject.c: double-check validity of last_name_char in
dict{lookup,insert,remove}.
* arraymodule.c: need memmove only for non-STDC Suns.
* Makefile: comment out HTML_LIBS and XT_USE by default
* pythonmain.c: don't prototype getopt() -- it's not standardized
* socketmodule.c: cast flags arg to {get,set}sockopt() and addrbuf arg to
recvfrom() to (ANY*).
* pythonrun.c (initsigs): fix prototype, make it static
* intobject.c (LONG_BIT): only #define it if not already defined
* classobject.[ch]: remove all references to unused instance_convert()
* mappingobject.c (getmappingsize): Don't return NULL in int function.
Added $(SYSDEF) to its build rule in Makefile.
* cgensupport.[ch], modsupport.[ch]: removed some old stuff. Also
changed files that still used it... And made several things static
that weren't but should have been... And other minor cleanups...
* listobject.[ch]: add external interfaces {set,get}listslice
* socketmodule.c: fix bugs in new send() argument parsing.
* sunaudiodevmodule.c: added flush() and close().
function found as instance data.
* socketmodule.c: added 'flags' argument sendto/recvfrom, rewrite
argument parsing in send/recv.
* More changes related to access (terminology change: owner instead of
class; allow any object as owner; local/global variables are owned
by their dictionary, only class/instance data is owned by the class;
"from...import *" now only imports objects with public access; etc.)
* Fixcprt.py: added [-y file] option, do only files younger than file.
* modsupport.[ch]: added vmkvalue().
* intobject.c: use mkvalue().
* stringobject.c: added "formatstring"; renamed string* to string_*;
ceval.c: call formatstring for string % value.
* longobject.c: close memory leak in divmod.
* parsetok.c: set result node to NULL when returning an error.
return NULL for malloc(0) or realloc(p, 0). (This should be done
differently than wasting one byte, but alas...)
* Moved "add'l libraries" option in Makefile to an earlier place.
* Remove argument compatibility hacks (b) and (c).
* Add grey2mono, dither2mono and mono2grey to imageop.
* Dup the fd in socket.fromfd().
* Added new modules mpz, md5 (by JH, requiring GNU MP 1.2). Affects
Makefile and config.c.
* socketmodule.c: added socket.fromfd(fd, family, type, [proto]),
converted socket() to use of getargs().
* socketmodule.c: get rid of makepair(); fix makesocketaddr to fix
broken recvfrom()
* socketmodule: get rid of getStrarg()
* ceval.h: move eval_code() to new file eval.h, so compile.h is no
longer needed.
* ceval.c: move thread comments to ceval.h; always make save/restore
thread functions available (for dynloaded modules)
* cdmodule.c, listobject.c: don't include compile.h
* flmodule.c: include ceval.h
* import.c: include eval.h instead of ceval.h
* cgen.py: add forground(); noport(); winopen(""); to initgl().
* bltinmodule.c, socketmodule.c, fileobject.c, posixmodule.c,
selectmodule.c:
adapt to threads (add BGN/END SAVE macros)
* stdwinmodule.c: adapt to threads and use a special stdwin lock.
* pythonmain.c: don't include getpythonpath().
* pythonrun.c: use BGN/END SAVE instead of direct calls; also more
BGN/END SAVE calls etc.
* thread.c: bigger stack size for sun; change exit() to _exit()
* threadmodule.c: use BGN/END SAVE macros where possible
* timemodule.c: adapt better to threads; use BGN/END SAVE; add
longsleep internal function if BSD_TIME; cosmetics
Thomas Wouters
Peter Schneider-Kamp
Fredrik Lundh
Tim Peters
Marc-André Lemburg
Fred Drake
Guido van Rossum
Andrew M. Kuchling
Barry Warsaw
Jack Jansen