consistency checks, enabled only in a debug (Py_DEBUG) build. Note that
this never gets called automatically unless PYMALLOC_DEBUG is #define'd
too, and the envar PYTHONMALLOCSTATS exists.
Added code to call this when PYMALLOC_DEBUG is enabled, and envar
PYTHONMALLOCSTATS is set, whenever a new arena is obtained and once
late in the Python shutdown process.
_PyObject_DebugMalloc: explicitly cast PyObject_Malloc's result to the
target pointer type.
_PyObject_DebugDumpStats: change decl of arena_alignment from unsigned
int to unsigned long.
This is for the 2.3 release only (it's new code).
most of the work. In particular, if the underlying realloc is able to
grow the memory block in place, great (this routine used to do a fresh
malloc + memcpy every time a block grew). BTW, I'm not so keen here on
avoiding possible quadratic-time realloc patterns as I am on making
the debug pymalloc more invisible (the more it uses memory "just like"
the underlying allocator, the better the chance that a suspected memory
corruption bug won't vanish when the debug malloc is turned on).
The bug report pointed out a bogosity in the comment block explaining
thread safety for arena management. Repaired that comment, repaired a
couple others while I was at it, and added an assert.
_PyMalloc_DebugRealloc: If this needed to get more memory, but couldn't,
it erroneously freed the original memory. Repaired that.
This is for 2.3 only (unless we decide to backport the new pymalloc).
runtime multiplications and divisions, via the scheme developed with
Vladimir Marangozov on Python-Dev. The pool_header struct loses its
capacity member, but gains nextoffset and maxnextoffset members; this
still leaves it at 32 bytes on a 32-bit box (it has to be padded to a
multiple of 8 bytes).
what these do given a 0 size argument. This is so that when pymalloc
is enabled, we don't need to wrap pymalloc calls in goofy little
routines special-casing 0. Note that it's virtually impossible to meet
the doc's promise that malloc(0) will never return NULL; this makes a
best effort, but not an insane effort. The code does promise that
realloc(not-NULL, 0) will never return NULL (malloc(0) is much harder).
_PyMalloc_Realloc: Changed to take over all requests for 0 bytes, and
rearranged to be a little quicker in expected cases.
All over the place: when resorting to the platform allocator, call
free/malloc/realloc directly, without indirecting thru macros. This
should avoid needing a nightmarish pile of #ifdef-ery if PYMALLOC_DEBUG
is changed so that pymalloc takes over all Py(Mem, Object} memory
operations (which would add useful debugging info to PyMem_xyz
allocations too).
possible pool states. I think it's much clearer now.
Added a new long overdue block-management overview comment block.
I believe the comments are in good shape now.
Added two comments about possible small optimizations (one getting rid
of runtime multiplications at the cost of a new pool_header member; the
other getting rid of runtime divisions and the pool_header capacity
member, at the cost of a static const vector of 32 uints).
This displays stats about the # of arenas, pools, blocks and bytes, to
stderr, both used and reserved but unused.
CAUTION: Because PYMALLOC_DEBUG is on, the debug malloc routine adds
16 bytes to each request. This makes each block appear two size classes
higher than it would be if PYMALLOC_DEBUG weren't on.
So far, playing with this confirms the obvious: there's a lot of activity
in the "small dict" size class, but nothing in the core makes any use of
the 8-byte or 16-byte classes.
the code so that the most frequent cases come first. Added comments.
Found a hidden assumption that a pool contains room for at least two
blocks, and added an assert to catch a violation if it ever happens in
a place where that matters. Gave the normal "I allocated this block"
case a longer basic block to work with before it has to do its first
branch (via breaking apart an embedded assignment in an "if", and
hoisting common code out of both branches).
address obtained from system malloc/realloc without holding the GIL.
When the vector of arena base addresses has to grow, the old vector is
deliberately leaked. This makes "stale" x-thread references safe.
arenas and narenas are also declared volatile, and changed in an order
that prevents a thread from picking up a value of narenas too large
for the value of arenas it sees.
Added more asserts.
Fixed an old inaccurate comment.
Added a comment explaining why it's safe to call pymalloc free/realloc
with an address obtained from system malloc/realloc even when arenas is
still NULL (this is obscure, since the ADDRESS_IN_RANGE macro
appears <wink> to index into arenas).
this. But added an overflow check just in case there is.
Got rid of the ushort macro. It wasn't used anymore (it was only used
in the no-longer-exists off_t macro), and there's no plausible use for it.
waste the first pool if malloc happens to return a pool-aligned address.
This means the number of pools per arena can now vary by 1. Unfortunately,
the code counted up from 0 to a presumed constant number of pools. So
changed the increasing "watermark" counter to a decreasing "nfreepools"
counter instead, and fiddled various stuff accordingly. This also allowed
getting rid of two more macros.
Also changed the code to align the first address to a pool boundary
instead of a page boundary. These are two parallel sets of macro #defines
that happen to be identical now, but the page macros are in theory more
restrictive (bigger), and there's simply no reason I can see that it
wasn't aligning to the less restrictive pool size all along (the code
only relies on pool alignment).
Hmm. The "page size" macros aren't used for anything *except* defining
the pool size macros, and the comments claim the latter isn't necessary.
So this has the feel of a layer of indirection that doesn't serve a
purpose; should probably get rid of the page macros now.
are called without the GIL. It's incredibly unlikely to fail, but I can't
make this bulletproof without either adding a lock for exclusion, or
giving up on growing the arena base-address vector (it would be safe if
this were a static array).
+ A new scheme for determining whether an address belongs to a pymalloc
arena. This should be 100% reliable. The poolp->pooladdr and
poolp->magic members are gone. A new poolp->arenaindex member takes
their place. Note that the pool header overhead doesn't actually
shrink, though, since the header is padded to a multiple of 8 bytes.
+ _PyMalloc_Free and _PyMalloc_Realloc should now be safe to call for
any legit address, whether obtained from a _PyMalloc function or from
the system malloc/realloc. It should even be safe to call
_PyMalloc_Free when *not* holding the GIL, provided that the passed-in
address was obtained from system malloc/realloc. Since this is
accomplished without any locks, you better believe the code is subtle.
I hope it's sufficiently commented.
+ The above implies we don't need the new PyMalloc_{New, NewVar, Del}
API anymore, and could switch back to PyObject_XXX without breaking
existing code mixing PyObject_XXX with PyMem_{Del, DEL, Free, FREE}.
Nothing is done here about that yet, and I'd like to see this new
code exercised more first.
+ The small object threshhold is boosted to 256 (the max). We should
play with that some more, but the old 64 was way too small for 2.3.
+ Getting a new arena is now done via new function new_arena().
+ Removed some unused macros, and squashed out some macros that were
used only once to define other macros.
+ Arenas are no longer linked together. A new vector of arena base
addresses had to be created anyway to make address classification
bulletproof.
+ A lot of the patch size is an illusion: given the way address
classification works now, it was more convenient to switch the
sense of the prime "if" tests in the realloc and free functions,
so the "if" and "else" blocks got swapped.
+ Assorted minor code, comment and whitespace cleanup.
Back to the Windows installer <wink>.
Assorted: bump the serial number via a trivial new bumpserialno()
function. The point is to give a single place to set a breakpoint when
waiting for a specific serial number.
When WITH_PYMALLOC is defined, define PYMALLOC_DEBUG to enable the debug
allocator. This can be done independent of build type (release or debug).
A debug build automatically defines PYMALLOC_DEBUG when pymalloc is
enabled. It's a detected error to define PYMALLOC_DEBUG when pymalloc
isn't enabled.
Two debugging entry points defined only under PYMALLOC_DEBUG:
+ _PyMalloc_DebugCheckAddress(const void *p) can be used (e.g., from gdb)
to sanity-check a memory block obtained from pymalloc. It sprays
info to stderr (see next) and dies via Py_FatalError if the block is
detectably damaged.
+ _PyMalloc_DebugDumpAddress(const void *p) can be used to spray info
about a debug memory block to stderr.
A tiny start at implementing "API family" checks isn't good for
anything yet.
_PyMalloc_DebugRealloc() has been optimized to do little when the new
size is <= old size. However, if the new size is larger, it really
can't call the underlying realloc() routine without either violating its
contract, or knowing something non-trivial about how the underlying
realloc() works. A memcpy is always done in this case.
This was a disaster for (and only) one of the std tests: test_bufio
creates single text file lines up to a million characters long. On
Windows, fileobject.c's get_line() uses the horridly funky
getline_via_fgets(), which keeps growing and growing a string object
hoping to find a newline. It grew the string object 1000 bytes each
time, so for a million-character string it took approximately forever
(I gave up after a few minutes).
So, also:
fileobject.c, getline_via_fgets(): When a single line is outrageously
long, grow the string object at a mildly exponential rate, instead of
just 1000 bytes at a time.
That's enough so that a debug-build test_bufio finishes in about 5 seconds
on my Win98SE box. I'm curious to try this on Win2K, because it has very
different memory behavior than Win9X, and test_bufio always took a factor
of 10 longer to complete on Win2K. It *could* be that the endless
reallocs were simply killing it on Win2K even in the release build.
Also move all _PyMalloc_XXX entry points into obmalloc.c.
The Windows build works fine.
The Unix build is changed here (Makefile.pre.in), but not tested.
No other platform's build process has been fiddled.
May or may not be related to bug 407680 (obmalloc.c - looks like it's
corrupted). This repairs the illegal vrbl names, but leaves a pile of
illegal macro names (_THIS_xxx, _SYSTEM_xxx, _SET_HOOKS, _FETCH_HOOKS).
Martin v. Löwis
Guido van Rossum
Jeremy Hylton
Tim Peters
Neil Schemenauer