If the marshal or bytecode formats get changed, frozen.c needs to
be updated as well. It can be easy to miss this step and not doing
so can cause test_importlib to crash in mysterious ways. Add an
explict unit test to make it easier to track down the problem.
_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Changes:
* _PyPathConfig_Fini() cannot be called in Py_FinalizeEx().
Py_Initialize() and Py_Finalize() can be called multiple times, but
it must not "forget" parameters set by Py_SetProgramName(),
Py_SetPath() or Py_SetPythonHome(), whereas _PyPathConfig_Fini()
clear all these parameters.
* config_get_program_name() and calculate_program_full_path() now
also decode paths using Py_DecodeLocale() to use the
surrogateescape error handler, rather than decoding using
mbstowcs() which is strict.
* Change _Py_CheckPython3() prototype: () => (void)
* Truncate a few lines which were too long
* _PyMainInterpreterConfig_ReadEnv() now sets program_name from
environment variables and pymain_parse_envvars() implements the
falls back on argv[0].
* Remove _PyMain.program_name: use the program_name from
_PyMainInterpreterConfig
* Move the Py_SetProgramName() call back to pymain_init_python(),
just before _Py_InitializeCore().
* pathconfig_global_init() now also calls
_PyMainInterpreterConfig_Read() to set program_name if it isn't set
yet
* Cleanup PyCalculatePath: pass main_config to subfunctions to get
directly fields from main_config (home, module_search_path_env and
program_name)
* Rename PyPathConfig structure to _PyPathConfig and move it to
Include/internal/pystate.h
* Rename path_config to _Py_path_config
* _PyPathConfig: Rename program_name field to program_full_path
* Add assert(str != NULL); to _PyMem_RawWcsdup(), _PyMem_RawStrdup()
and _PyMem_Strdup().
* Rename calculate_path() to pathconfig_global_init(). The function
now does nothing if it's already initiallized.
The current behaviour of yield expressions inside comprehensions and
generator expressions is essentially an accident of implementation - it
arises implicitly from the way the compiler handles yield expressions inside
nested functions and generators.
Since the current behaviour wasn't deliberately designed, and is inherently
confusing, we're deprecating it, with no current plans to reintroduce it.
Instead, our advice will be to use a named nested generator definition
for cases where this behaviour is desired.
In _io_FileIO_readall_impl(), lseek() and _Py_fstat_noraise() were called
without releasing the GIL. This can cause all threads to hang for
unlimited time when calling FileIO.read() and the NFS server is not
accessible.
Fix the following false-alarm Coverity warning:
Result is not floating-point
(UNINTENDED_INTEGER_DIVISION)integer_division: Dividing integer
expressions 9223372036854775807LL and 1000LL, and then converting
the integer quotient to type double. Any remainder, or fractional
part of the quotient, is ignored.
To compute and use a non-integer quotient, change or cast either
operand to type double. If integer division is intended, consider
indicating that by casting the result to type long long .
* Fixed saving bytearrays.
* Identical objects will be saved only once.
* Equal references will be load as identical objects.
* Added support for saving and loading recursive data structures.
When PyGILState_Ensure() is called in a non-Python thread before
PyEval_InitThreads(), only call PyEval_InitThreads() after calling
PyThreadState_New() to fix a crash.
Add an unit test in test_embed.
_Py_InitializeEx_Private() now calls
_PyMainInterpreterConfig_ReadEnv() to read environment variables
PYTHONHOME and PYTHONPATH, and set the program name.
Handle PyModule_AddIntConstant() and PyModule_AddStringConstant()
failures. Add also constants before calling setup_readline(), since
setup_readline() registers callbacks which uses a reference to the
module, whereas the module is destroyed if adding constants fails.
Fix Coverity warning:
CID 1414686: Unchecked return value (CHECKED_RETURN)
2. check_return: Calling PyModule_AddStringConstant without checking
return value (as is done elsewhere 45 out of 55 times).
* bpo-32101: Add sys.flags.dev_mode flag
Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
Mention it in the development chapiter.
* Add most_recent_first parameter to tracemalloc.Traceback.format to allow
reversing the order of the frames in the output
* Reversed default sorting of tracemalloc.Traceback frames
* Allowed negative limit, truncating from the other side.
* Fix _PyMem_SetupAllocators("debug"): always restore allocators to
the defaults, rather than only caling _PyMem_SetupDebugHooks().
* Add _PyMem_SetDefaultAllocator() helper to set the "default"
allocator.
* Add _PyMem_GetAllocatorsName(): get the name of the allocators
* main() now uses debug hooks on memory allocators if Py_DEBUG is
defined, rather than calling directly malloc()
* Document default memory allocators in C API documentation
* _Py_InitializeCore() now fails with a fatal user error if
PYTHONMALLOC value is an unknown memory allocator, instead of
failing with a fatal internal error.
* Add new tests on the PYTHONMALLOC environment variable
* Add support.with_pymalloc()
* Add the _testcapi.WITH_PYMALLOC constant and expose it as
support.with_pymalloc().
* sysconfig.get_config_var('WITH_PYMALLOC') doesn't work on Windows, so
replace it with support.with_pymalloc().
* pythoninfo: add _testcapi collector for pymem
``uuid.getnode()`` now preferentially returns universally administered MAC addresses if available, over locally administered MAC addresses. This makes a better guarantee for global uniqueness of UUIDs returned from ``uuid.uuid1()``. If only locally administered MAC addresses are available, the first such one found is returned.
Also improve internal code style by being explicit about ``return None`` rather than falling off the end of the function.
Improve the test robustness.
CPython migrated from CVS to Subversion, to Mercurial, and then to
Git. CVS and Subversion are not more used to develop CPython.
* platform module: drop support for sys.subversion. The
sys.subversion attribute has been removed in Python 3.3.
* Remove Misc/svnmap.txt
* Remove Tools/scripts/svneol.py
* Remove Tools/scripts/treesync.py
* distutils.config: Use the PyPIRCCommand.realm attribute if set
* turtledemo: wait until macOS osascript command completes to not
create a zombie process
* Tools/scripts/treesync.py: declare 'default_answer' and
'create_files' as globals to modify them with the command line
arguments. Previously, -y, -n, -f and -a options had no effect.
flake8 warning: "F841 local variable 'p' is assigned to but never
used".
* Remove asyncio.selectors and asyncio._overlapped symbols from the
namespace of the asyncio module
* Replace "from asyncio import selectors" with "import selectors"
* Replace "from asyncio import _overlapped" with "import _overlapped"
asyncio.selectors was added to support Python 3.3, which doesn't have
selectors in its standard library, and Python 3.4 in the same code
base. Same rationale for asyncio._overlapped. Python 3.3 reached its
end of life, and asyncio is no more maintained as a third party
module on PyPI.
The asyncio/compat.py file was written to support Python < 3.5 and
Python < 3.5.2. But Python 3.5 doesn't accept bugfixes anymore, only
security fixes. There is no more need to backport bugfixes to Python
3.5, and so no need to have a single code base for Python 3.5, 3.6
and 3.7.
Say hello (again) to "async" and "await", who became real keywords in
Python 3.7 ;-)
Julien Palard
Neil Schemenauer
Serhiy Storchaka
Victor Stinner
John Chen
xdegaye
Nir Soffer
Jesse-Bakker
Andrew Svetlov
Terry Jan Reedy
Barry Warsaw
Jonas Haag
Dong-hee Na
gauravbackback