longer to run than normal. A profiler run showed that this was due to
PyFrame_New() taking up an unreasonable amount of time. A little
thinking showed that this was due to the while loop clearing the space
available for the stack. The solution is to only clear the local
variables (and cells and free variables), not the space available for
the stack, since anything beyond the stack top is considered to be
garbage anyway. Also, use memset() instead of a while loop counting
backwards. This should be a time savings for normal code too! (By a
probably unmeasurable amount. :-)
version of PySlice_GetIndicesEx"):
> OK. Michael, if you want to check in indices(), go ahead.
Then I did what was needed, but didn't check it in. Here it is.
listsort. If the former calls itself recursively, they're a waste of
time, since it's called on a random permutation of a random subset of
elements. OTOH, for exactly the same reason, they're an immeasurably
small waste of time (the odds of finding exploitable order in a random
permutation are ~= 0, so the special-case loops looking for order give
up quickly). The point is more for conceptual clarity.
Also changed some "assert comments" into real asserts; when this code
was first written, Python.h didn't supply assert.h.
introduced, list.sort() was rewritten to use only the "< or not <?"
distinction. After rich comparisons were introduced, docompare() was
fiddled to translate a Py_LT Boolean result into the old "-1 for <,
0 for ==, 1 for >" flavor of outcome, and the sorting code was left
alone. This left things more obscure than they should be, and turns
out it also cost measurable cycles.
So: The old CMPERROR novelty is gone. docompare() is renamed to islt(),
and now has the same return conditinos as PyObject_RichCompareBool. The
SETK macro is renamed to ISLT, and is even weirder than before (don't
complain unless you want to maintain the sort code <wink>).
Overall, this yields a 1-2% speedup in the usual (no explicit function
passed to list.sort()) case when sorting arrays of floats (as sortperf.py
does). The boost is higher for arrays of ints.
The staticforward define was needed to support certain broken C
compilers (notably SCO ODT 3.0, perhaps early AIX as well) botched the
static keyword when it was used with a forward declaration of a static
initialized structure. Standard C allows the forward declaration with
static, and we've decided to stop catering to broken C compilers. (In
fact, we expect that the compilers are all fixed eight years later.)
I'm leaving staticforward and statichere defined in object.h as
static. This is only for backwards compatibility with C extensions
that might still use it.
XXX I haven't updated the documentation.
PyType_Ready() because the tp_iternext slot is set (fortunately,
because using the tp_iternext implementation for the the next()
implementation is buggy). Also changed the allocation order in
enum_next() so that the underlying iterator is only moved ahead when
we have successfully allocated the result tuple and index.
di_dict field when the end of the list is reached. Also make the
error ("dictionary changed size during iteration") a sticky state.
Also remove the next() method -- one is supplied automatically by
PyType_Ready() because the tp_iternext slot is set. That's a good
thing, because the implementation given here was buggy (it never
raised StopIteration).
object references (it_seq for seqiterobject, it_callable and
it_sentinel for calliterobject) when the end of the list is reached.
Also remove the next() methods -- one is supplied automatically by
PyType_Ready() because the tp_iternext slot is set. That's a good
thing, because the implementation given here was buggy (it never
raised StopIteration).
it_seq field when the end of the list is reached.
Also remove the next() method -- one is supplied automatically by
PyType_Ready() because the tp_iternext slot is set. That's a good
thing, because the implementation given here was buggy (it never
raised StopIteration).
If the object is an ExtensionClass, for example, the slot is not even
defined. So we must check that the type has the slot (implied by
HAVE_CLASS) before calling tp_init().
explicit comparison function case: use PyObject_Call instead of
PyEval_CallObject. Same thing in context, but gives a 2.4% overall
speedup when sorting a list of ints via list.sort(__builtin__.cmp).
MSDN sample programs use it, apparently in error. The correct name
is WIN32_LEAN_AND_MEAN. After switching to the correct name, in two
cases more was needed because the code actually relied on things that
disappear when WIN32_LEAN_AND_MEAN is defined.
arg tuple. This was suggested on c.l.py but afraid I can't find the msg
again for proper attribution. For
list.sort(cmp)
where list is a list of random ints, and cmp is __builtin__.cmp, this
yields an overall 50-60% speedup on my Win2K box. Of course this is a
best case, because the overhead of calling cmp relative to the cost of
actually comparing two ints is at an extreme. Nevertheless it's huge
bang for the buck. An additionak 20-30% can be bought by making the arg
tuple an immortal static (avoiding all but "the first" PyTuple_New), but
that's tricky to make correct since docompare needs to be reentrant. So
this picks the cherry and leaves the pits for Fred <wink>.
Note that this makes no difference to the
list.sort()
case; an arg tuple gets built only if the user specifies an explicit
sort function.
helper macros to something saner, and used them appropriately in other
files too, to reduce #ifdef blocks.
classobject.c, instance_dealloc(): One of my worst Python Memories is
trying to fix this routine a few years ago when COUNT_ALLOCS was defined
but Py_TRACE_REFS wasn't. The special-build code here is way too
complicated. Now it's much simpler. Difference: in a Py_TRACE_REFS
build, the instance is no longer in the doubly-linked list of live
objects while its __del__ method is executing, and that may be visible
via sys.getobjects() called from a __del__ method. Tough -- the object
is presumed dead while its __del__ is executing anyway, and not calling
_Py_NewReference() at the start allows enormous code simplification.
typeobject.c, call_finalizer(): The special-build instance_dealloc()
pain apparently spread to here too via cut-'n-paste, and this is much
simpler now too. In addition, I didn't understand why this routine
was calling _PyObject_GC_TRACK() after a resurrection, since there's no
plausible way _PyObject_GC_UNTRACK() could have been called on the
object by this point. I suspect it was left over from pasting the
instance_delloc() code. Instead asserted that the object is still
tracked. Caution: I suspect we don't have a test that actually
exercises the subtype_dealloc() __del__-resurrected-me code.
more trivial lexical helper macros so that uses of these guys expand
to nothing at all when they're not enabled. This should help sub-
standard compilers that can't do a good job of optimizing away the
previous "(void)0" expressions.
Py_DECREF: There's only one definition of this now. Yay! That
was that last one in the family defined multiple times in an #ifdef
maze.
Py_FatalError(): Changed the char* signature to const char*.
_Py_NegativeRefcount(): New helper function for the Py_REF_DEBUG
expansion of Py_DECREF. Calling an external function cuts down on
the volume of generated code. The previous inline expansion of abort()
didn't work as intended on Windows (the program often kept going, and
the error msg scrolled off the screen unseen). _Py_NegativeRefcount
calls Py_FatalError instead, which captures our best knowledge of
how to abort effectively across platforms.
Repair segfaults and infinite loops in COUNT_ALLOCS builds in the
presence of new-style (heap-allocated) classes/types.
Bugfix candidate. I'll backport this to 2.2. It's irrelevant in 2.1.
that have taken me "too long" to reverse-engineer over the years.
Vastly reduced the nesting level and redundancy of #ifdef-ery.
Took a light stab at repairing comments that are no longer true.
sys_gettotalrefcount(): Changed to enable under Py_REF_DEBUG.
It was enabled under Py_TRACE_REFS, which was much heavier than
necessary. sys.gettotalrefcount() is now available in a
Py_REF_DEBUG-only build.
mechanism is no longer evil: it no longer plays dangerous games with
the type pointer or refcounts, and objects in extension modules can play
along too without needing to edit the core first.
Rewrote all the comments to explain this, and (I hope) give clear
guidance to extension authors who do want to play along. Documented
all the functions. Added more asserts (it may no longer be evil, but
it's still dangerous <0.9 wink>). Rearranged the generated code to
make it clearer, and to tolerate either the presence or absence of a
semicolon after the macros. Rewrote _PyTrash_destroy_chain() to call
tp_dealloc directly; it was doing a Py_DECREF again, and that has all
sorts of obscure distorting effects in non-release builds (Py_DECREF
was already called on the object!). Removed Christian's little "embedded
change log" comments -- that's what checkin messages are for, and since
it was impossible to correlate the comments with the code that changed,
I found them merely distracting.
Tim Peters
Guido van Rossum
Neal Norwitz
Michael W. Hudson
Mark Hammond
Martin v. Löwis
Skip Montanaro
Jeremy Hylton
Raymond Hettinger