stack usage on FreeBSD, requiring the recursion limit to be lowered
further. Building with gcc 2.95 (the standard compiler on FreeBSD 4.x)
is now also affected.
The underlying issue is that FreeBSD's pthreads implementation has a
hard-coded 1MB stack size for the initial (or "primary") thread, which
can not be changed without rebuilding libc_r. Exhausting this stack
results in a bus error.
Building without pthreads (configure --without-threads), or linking
with the port of the Linux pthreads library (aka Linuxthreads) instead
of libc_r, avoids this limitation.
On OS/2, only gcc 3.2 is affected and the stack size is controllable,
so the special handling has been removed.
to use LASTMARK_SAVE()/LASTMARK_RESTORE(), based on the discussion
in patch #712900.
- Cleaned up LASTMARK_SAVE()/LASTMARK_RESTORE() usage, based on the
established rules.
- Moved the upper part of the just commited patch (relative to bug #725106)
to outside the for() loop of BRANCH OP. There's no need to mark_save()
in every loop iteration.
This problem is related to a wrong behavior from mark_save/restore(),
which don't restore the mark_stack_base before restoring the marks.
Greg's suggestion was to change the asserts, which happen to be
the only recursive ops that can continue the loop, but the problem would
happen to any operation with the same behavior. So, rather than
hardcoding this into asserts, I have changed mark_save/restore() to
always restore the stackbase before restoring the marks.
Both solutions should fix these two cases, presented by Greg:
>>> re.match('(a)(?:(?=(b)*)c)*', 'abb').groups()
('b', None)
>>> re.match('(a)((?!(b)*))*', 'abb').groups()
('b', None, None)
The rest of the bug and patch in #725149 must be discussed further.
within repeats of alternatives. The only change to the original
patch was to convert the tests to the new test_re.py file.
This patch fixes cases like:
>>> re.match('((a)|b)*', 'abc').groups()
('b', '')
Which is wrong (it's impossible to match the empty string),
and incompatible with other regex systems, like the following
examples show:
% perl -e '"abc" =~ /^((a)|b)*/; print "$1 $2\n";'
b a
% echo "abc" | sed -r -e "s/^((a)|b)*/\1 \2|/"
b a|c
I've applied a modified version of Greg Chapman's patch. I've included
the fixes without introducing the reorganization mentioned, for the sake
of stability. Also, the second fix mentioned in the patch don't fix the
mentioned problem anymore, because of the change introduced by patch
#720991 (by Greg as well). The new fix wasn't complicated though, and is
included as well.
As a note. It seems that there are other places that require the
"protection" of LASTMARK_SAVE()/LASTMARK_RESTORE(), and are just waiting
for someone to find how to break them. Particularly, I belive that every
recursion of SRE_MATCH() should be protected by these macros. I won't
do that right now since I'm not completely sure about this, and we don't
have much time for testing until the next release.
to be compliant with previous python versions, by backing out the changes
made in revision 2.84 which affected this. The bugfix for backtracking is
still maintained.
A small fix for bug #545855 and Greg Chapman's
addition of op code SRE_OP_MIN_REPEAT_ONE for
eliminating recursion on simple uses of pattern '*?' on a
long string.
This bug happened because: 1) the scanner_search and scanner_match methods
were not checking the buffer limits before increasing the current pointer;
and 2) SRE_SEARCH was using "if (ptr == end)" as a loop break, instead of
"if (ptr >= end)".
* Modules/_sre.c
(SRE_SEARCH): Check for "ptr >= end" to break loops, so that we don't
hang forever if a pointer passing the buffer limit is used.
(scanner_search,scanner_match): Don't increment the current pointer
if we're going to pass the buffer limit.
* Misc/NEWS
Mention the fix.
from Greg Chapman.
* Modules/_sre.c
(lastmark_restore): New function, implementing algorithm to restore
a state to a given lastmark. In addition to the similar algorithm used
in a few places of SRE_MATCH, restore lastindex when restoring lastmark.
(SRE_MATCH): Replace lastmark inline restoring by lastmark_restore(),
function. Also include it where missing. In SRE_OP_MARK, set lastindex
only if i > lastmark.
* Lib/test/re_tests.py
* Lib/test/test_sre.py
Included regression tests for the fixed bugs.
* Misc/NEWS
Mention fixes.
The staticforward define was needed to support certain broken C
compilers (notably SCO ODT 3.0, perhaps early AIX as well) botched the
static keyword when it was used with a forward declaration of a static
initialized structure. Standard C allows the forward declaration with
static, and we've decided to stop catering to broken C compilers. (In
fact, we expect that the compilers are all fixed eight years later.)
I'm leaving staticforward and statichere defined in object.h as
static. This is only for backwards compatibility with C extensions
that might still use it.
XXX I haven't updated the documentation.
backed out of broken minimal repeat patch from July
also fixed a couple of minor potential resource leaks in pattern_subx
(Guido had already fixed the big one)
type.__module__ behavior.
This adds the module name and a dot in front of the type name in every
type object initializer, except for built-in types (and those that
already had this). Note that it touches lots of Mac modules -- I have
no way to test these but the changes look right. Apologies if they're
not. This also touches the weakref docs, which contains a sample type
object initializer. It also touches the mmap test output, because the
mmap type's repr is included in that output. It touches object.h to
put the correct description in a comment.
(At least for the repeatable test case that Tim produced.)
pattern_subx(): Add missing DECREF(filter) in both exit branches
(normal and error return). Also fix a DECREF(args) that should
certainly be a DECREF(match) -- because it's inside if (!args) and
right after allocation of match.
strings, not C strings)
removed USE_PYTHON defines, and related sre.py helpers
skip calling the subx helper if the template is callable.
interestingly enough, this means that
def callback(m):
return literal
result = pattern.sub(callback, string)
is much faster than
result = pattern.sub(literal, string)
removed (conceptually flawed) getliteral helper; the new sub/subn code
uses a faster code path for literal replacement strings, but doesn't
(yet) look for literal patterns.
added STATE_OFFSET macro, and use it to convert state.start/ptr to
char indexes
#462270: sub-tle difference between pre.sub and sre.sub. PRE ignored
an empty match at the previous location, SRE didn't.
also synced with Secret Labs "sreopen" codebase.
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
(bugs #115903, #115696)
This is based on a patch by Darrel Gallion. I'm not 100%
sure about this fix, but I haven't managed to come up with
any test case it cannot handle...
-- added some more docstrings
-- fixed typo in scanner class (#125531)
-- the multiline flag (?m) should't affect the \Z operator (#127259)
-- fixed non-greedy backtracking bug (#123769, #127259)
-- added sre.DEBUG flag (currently dumps the parsed pattern structure)
-- fixed a couple of glitches in groupdict (the #126587 memory leak
had already been fixed by AMK)
-- fixed negative lookbehind to work correctly at the beginning
of the target string (bug #117242)
-- improved syntax check; you can no longer refer to a group
inside itself (bug #110866)
Add definitions of INT_MAX and LONG_MAX to pyport.h.
Remove includes of limits.h and conditional definitions of INT_MAX
and LONG_MAX elsewhere.
This closes SourceForge patch #101659 and bug #115323.
with success. also, check return values from the mark functions.
this addresses (but doesn't really solve) bug #112693, and low-memory
problems reported by jack jansen.
(64-bit AIX) This is because the RECURSION_LIMIT is too low. This patch lowers
to recusion limit to 7500 such that the recusion check fires before a segfault.
Fredrik suggested/approved the fix in private email, modulo sre's recusion
limit checking no being necessary when PyOS_CheckStack is implemented for
Windows.
(this should fix Sjoerd's xmllib problem)
-- added skip field to INFO header
-- changed compiler to generate charset INFO header
-- changed trace messages to support post-mortem analysis
-- fixed literal check in branch operator
(this broke test_tokenize, as reported by Mark Favas)
-- added REPEAT_ONE operator (still not enabled, though)
-- added some debugging stuff (maxlevel)
-- reverted REPEAT operator to use "repeat context" strategy
(from 0.8.X), but done right this time.
-- got rid of backtracking stack; use nested SRE_MATCH calls
instead (should probably put it back again in 0.9.9 ;-)
-- properly reset state in scanner mode
-- don't use aggressive inlining by default
+ added "regs" attribute
+ fixed "pos" and "endpos" attributes
+ reset "lastindex" and "lastgroup" in scanner methods
+ removed (?P#id) syntax; the "lastindex" and "lastgroup"
attributes are now always set
+ removed string module dependencies in sre_parse
+ better debugging support in sre_parse
+ various tweaks to build under 1.5.2
and a couple of functions that were missed in the previous batches. Not
terribly tested, but very carefully scrutinized, three times.
All these were found by the little findkrc.py that I posted to python-dev,
which means there might be more lurking. Cases such as this:
long
func(a, b)
long a;
long b; /* flagword */
{
and other cases where the last ; in the argument list isn't followed by a
newline and an opening curly bracket. Regexps to catch all are welcome, of
course ;)
- reorganized some code to get rid of -Wall and -W4
warnings
- fixed default argument handling for sub/subn/split
methods (reported by Peter Schneider-Kamp).
the pattern must have a fixed width.
- got rid of array-module dependencies; the match pro-
gram is now stored inside the pattern object, rather
than in an extra string buffer.
- cleaned up a various of potential leaks, api abuses,
and other minors in the engine module.
- use mal's new isalnum macro, rather than my own work-
around.
- untabified test_sre.py. seems like I removed a couple
of trailing spaces in the process...
"lastgroup" is the name of the last matched capturing group,
"lastindex" is the index of the same group. if no group was
matched, both attributes are set to None.
the (?P#) feature will be removed in the next relase.
used by the code generator)
- changed max repeat value in engine (to match earlier array fix)
- added experimental "which part matched?" mechanism to sre; see
http://hem.passagen.se/eff/2000_07_01_bot-archive.htm#416954
or python-dev for details.
speedup for some tests, including the python tokenizer.
-- added support for an optional charset anchor to the engine
(currently unused by the code generator).
-- removed workaround for array module bug.
-- changed 1.6 to 2.0 in the file headers
-- fixed ISALNUM macro for the unicode locale. this
solution isn't perfect, but the best I can do with
Python's current unicode database.
-- added pickling support (only works if sre is imported)
-- fixed wordsize problems in engine
(instead of casting literals down to the character size,
cast characters up to the literal size (same as the code
word size). this prevents false hits when you're matching
a unicode pattern against an 8-bit string. (unfortunately,
this broke another test, but I think the test should be
changed in this case; more on that on python-dev)
-- added sre.purge function
(unofficial, clears the cache)
group reset problem. in the meantime, I added some
optimizations:
- added "inline" directive to LOCAL
(this assumes that AC_C_INLINE does what it's
supposed to do). to compile SRE on a non-unix
platform that doesn't support inline, you have
to add a "#define inline" somewhere...
- added code to generate a SRE_OP_INFO primitive
- added code to do fast prefix search
(enabled by the USE_FAST_SEARCH define; default
is on, in this release)
(those semantics are weird...)
- got rid of $Id$'s (for the moment, at least). in other
words, there should be no more "empty" checkins.
- internal: some minor cleanups.
(test_sre still complains about split, but that's caused by
the group reset bug, not split itself)
- added more mark slots
(should be dynamically allocated, but 100 is better than 32.
and checking for the upper limit is better than overwriting
the memory ;-)
- internal: renamed the cursor helper class
- internal: removed some bloat from sre_compile
tests in sre_patch back to previous version
- fixed return value from findall
- renamed a bunch of functions inside _sre (way too
many leading underscores...)
</F>
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.
(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode. I'm also holding back on his
change to main.c, which seems unnecessary to me.)
Andrew MacIntyre
Andrew M. Kuchling
Gustavo Niemeyer
Martin v. Löwis
Guido van Rossum
Fredrik Lundh
Neal Norwitz
Michael W. Hudson
Mark Hammond
Jeremy Hylton
Sjoerd Mullender
Barry Warsaw
Tim Peters
Fred Drake
Trent Mick
Jack Jansen
Thomas Wouters