Renamed copy_reg to copyreg in the standard library, to avoid
spurious warnings and ease later merging to py3k branch. Public
documentation remains intact.
characters. This avoids the common case of something like 'NUMBER(10)' not
being parsed as 'NUMBER', like expected. Also corrected the docs about
converter names being case-sensitive. They aren't any longer.
cmath module is loaded) instead of statically. This fixes compile-time
problems on platforms where HUGE_VAL is an extern variable rather than
a constant.
Thanks Hirokazu Yamamoto for the patch.
The patch also adds acosh, asinh, atanh, log1p and copysign to all platforms. Finally it fixes differences between platforms like different results or exceptions for edge cases. Have fun :)
'warnings' code in places where it was previously not possible (e.g., the
parser). It could also potentially lead to a speed-up in interpreter start-up
if the C version of the code (_warnings) is imported over the use of the
Python version in key places.
Closes issue #1631171.
-J and -X are now reserved for Jython and non-standard arguments (e.g. IronPython). I've added some extra comments to make sure the reservation don't get missed in the future.
It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType),
when they can easily be obtained with python code.
These expressions even work with Jython.
I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 )
at least this change makes it simpler.
I applied the same changes manually to VS7.1 and VC6 files; completely untested.
(Christian, don't try too hard merging this change into py3k.
It will be easier to do the same work again on the branch)
svn+ssh://pythondev@svn.python.org/python/branches/trunk-bytearray
........
r61750 | christian.heimes | 2008-03-22 20:47:44 +0100 (Sat, 22 Mar 2008) | 1 line
Copied files from py3k w/o modifications
........
r61752 | christian.heimes | 2008-03-22 20:53:20 +0100 (Sat, 22 Mar 2008) | 7 lines
Take One
* Added initialization code, warnings, flags etc. to the appropriate places
* Added new buffer interface to string type
* Modified tests
* Modified Makefile.pre.in to compile the new files
* Added bytesobject.c to Python.h
........
r61754 | christian.heimes | 2008-03-22 21:22:19 +0100 (Sat, 22 Mar 2008) | 2 lines
Disabled bytearray.extend for now since it causes an infinite recursion
Fixed serveral unit tests
........
r61756 | christian.heimes | 2008-03-22 21:43:38 +0100 (Sat, 22 Mar 2008) | 5 lines
Added PyBytes support to several places:
str + bytearray
ord(bytearray)
bytearray(str, encoding)
........
r61760 | christian.heimes | 2008-03-22 21:56:32 +0100 (Sat, 22 Mar 2008) | 1 line
Fixed more unit tests related to type('') is not unicode
........
r61763 | christian.heimes | 2008-03-22 22:20:28 +0100 (Sat, 22 Mar 2008) | 2 lines
Fixed more unit tests
Fixed bytearray.extend
........
r61768 | christian.heimes | 2008-03-22 22:40:50 +0100 (Sat, 22 Mar 2008) | 1 line
Implemented old buffer interface for bytearray
........
r61772 | christian.heimes | 2008-03-22 23:24:52 +0100 (Sat, 22 Mar 2008) | 1 line
Added backport of the io module
........
r61775 | christian.heimes | 2008-03-23 03:50:49 +0100 (Sun, 23 Mar 2008) | 1 line
Fix str assignement to bytearray. Assignment of a str of size 1 is interpreted as a single byte
........
r61805 | christian.heimes | 2008-03-23 19:33:48 +0100 (Sun, 23 Mar 2008) | 3 lines
Fixed more tests
Fixed bytearray() comparsion with unicode()
Fixed iterator assignment of bytearray
........
r61809 | christian.heimes | 2008-03-23 21:02:21 +0100 (Sun, 23 Mar 2008) | 2 lines
str(bytesarray()) now returns the bytes and not the representation of the bytearray object
Enabled and fixed more unit tests
........
r61812 | christian.heimes | 2008-03-23 21:53:08 +0100 (Sun, 23 Mar 2008) | 3 lines
Clear error PyNumber_AsSsize_t() fails
Use CHARMASK for ob_svall access
disabled a test with memoryview again
........
r61819 | christian.heimes | 2008-03-23 23:05:57 +0100 (Sun, 23 Mar 2008) | 1 line
Untested updates to the PCBuild directory
........
r61917 | christian.heimes | 2008-03-26 00:57:06 +0100 (Wed, 26 Mar 2008) | 1 line
The type system of Python 2.6 has subtle differences to 3.0's. I've removed the Py_TPFLAGS_BASETYPE flags from bytearray for now. bytearray can't be subclasses until the issues with bytearray subclasses are fixed.
........
r61920 | christian.heimes | 2008-03-26 01:44:08 +0100 (Wed, 26 Mar 2008) | 2 lines
Disabled last failing test
I don't understand what the test is testing and how it suppose to work. Ka-Ping, please check it out.
........
r61930 | christian.heimes | 2008-03-26 12:46:18 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytes warning code
........
r61933 | christian.heimes | 2008-03-26 13:20:46 +0100 (Wed, 26 Mar 2008) | 1 line
Fixed a bug in the new buffer protocol. The buffer slots weren't copied into a subclass.
........
r61934 | christian.heimes | 2008-03-26 13:25:09 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytearray subclassing - all tests are passing.
........
2.x signed value. Also, don't waste space on a table full of unsigned longs
when all it needs are unsigned ints (incase anyone builds this without zlib on
a 64-bit unix for some strange reason).
tested by forcing it to compile this version on both 32-bit and 64-bit linux.
platforms with a 64-bit long.
The Alpha/Tru64 test problem is a problem in either tarfile or test_tarfile,
not zlib.
crc32 and adler32 return 32-bit values. by using a long thats larger than
32-bits in these functions they were prevented from wrapping around to their
signed 32-bit value that we want them to return in python 2.x.
which made the return value signed. On the Alpha that also lost data
since sizeof(int) != sizeof(long) and apparently adler32/crc32 return
64 bits of data. This change keeps the signedness and continues to store the
data in a long rather than an int as was the case before r61449.
The patch adds wrappers for the Linux epoll syscalls and the BSD kqueue syscalls. Thanks to Thomas Herve and the Twisted people for their support and help.
TODO: Finish documentation documentation
when used on platforms that actually define ioctl as taking an unsigned long.
(the BSDs and OS X / Darwin)
Adds a unittest for fcntl.ioctl that tests what happens with both positive and
negative numbers.
This was done because of issue1471 but I'm not able to reproduce -that- problem
in the first place on Linux 32bit or 64bit or OS X 10.4 & 10.5 32bit or 64 bit.
uid and gid input to accept values >=2**31 as valid while still accepting
negative numbers to pass -1 to chown for "no change".
Fixes issue1747858.
This should be backported to release25-maint.
regardless of the native sizeof(long) used in the integer object.
This somewhat odd behavior of returning a signed is maintained in 2.x for
compatibility reasons of always returning an integer rather than a long object.
Fixes Issue1202 for Python 2.6
The bundled libffi copy is now in sync with the recently released
libffi3.0.4 version, apart from some small changes to
Modules/_ctypes/libffi/configure.ac.
I gave up on using libffi3 files on os x.
Instead, static configuration with files from pyobjc is used.
My tests don't show the promised speed up of 10%. The code is as fast as the old code for simple cases and slightly faster for complex cases with several of args and kwargs. But the patch simplifies the code, too.
were two module_methods and the one used depended on the order the
modules were loaded. By making the test module_methods static,
it is not exported and the correct version is picked up.
* Fix-up issues pointed-out by Neal Norwitz.
* Add extensive comments.
* The lz->result variable is now a tuple instead of a list.
* Use fast macro getitem/setitem calls so most code is in-line.
* Re-use the result tuple if available (modify in-place instead of copy).
Highlights:
- Adding PyObject_Format.
- Adding string.Format class.
- Adding __format__ for str, unicode, int, long, float, datetime.
- Adding builtin format.
- Adding ''.format and u''.format.
- str/unicode fixups for formatters.
The files in Objects/stringlib that implement PEP 3101 (stringdefs.h,
unicodedefs.h, formatter.h, string_format.h) are identical in trunk
and py3k. Any changes from here on should be made to trunk, and
changes will propogate to py3k).
function can be called recursively.
This was discussed in issue1020188.
In python codebase, all occurrences of Py_[X]DECREF(xxx->yyy) are suspect,
except when they appear in tp_new or tp_dealloc functions, or when
the member cannot be of a user-defined class.
Note that tp_init is not safe.
I do have a (crashing) example for every changed line.
Is it worth adding them to the test suite?
Example:
class SpecialStr(str):
def __del__(self):
s.close()
import cStringIO
s = cStringIO.StringIO(SpecialStr("text"))
s.close() # Segfault
First chapter of the Python 3.0 io framework back port: _fileio
The next step depends on a working bytearray type which itself depends on a backport of the nwe buffer API.
from the WeakValueDictionary was slower by nearly a factor of 3.
To avoid leaks, weakref proxies for the array types are put into the
cache dict, with weakref callbacks that removes the entries when the
type goes away.
a default timeout has been set, by using getsockopt() to get the error
condition (instead of trying another connect() call, which seems to be
a Linuxism).
2.5 bugfix candidate, assuming no one reports any problems with this change.
var_decl: Declared variable "stm" without initializer
ninit_use_in_call: Using uninitialized value "stm" (field "stm".tm_zone uninitialized) in call to function "mktime"
ctypes takes some liberties when creating python types: it modifies the types'
__dict__ directly, bypassing all the machinery of type objects which deal with
special methods. And this broke recent optimisations of method lookup.
Now we try to modify the type with more "official" functions.
SRE_MATCH so that signal handlers can be invoked during
long regular expression matches. It also adds a new
error return value indicating that an exception
occurred in a signal handler during the match, allowing
exceptions in the signal handler to propagate up to the
main loop. Thanks Josh Hoyt and Ralf Schmitt.
This prevents traceback prints pointing to files in this way:
File "\loewis\25\python\Modules\_ctypes\callbacks.c", line 206, in 'calling callback function'
round included:
* Revert round to its 2.6 behavior (half away from 0).
* Because round, floor, and ceil always return float again, it's no
longer necessary to have them delegate to __xxx___, so I've ripped
that out of their implementations and the Real ABC. This also helps
in implementing types that work in both 2.6 and 3.0: you return int
from the __xxx__ methods, and let it get enabled by the version
upgrade.
* Make pow(-1, .5) raise a ValueError again.
the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361,
r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new
documentation. The only significant difference is that round(x) returns a float
to preserve backward-compatibility. See http://bugs.python.org/issue1689.
This adds signal.set_wakeup_fd(fd) which sets a file descriptor to
which a zero byte will be written whenever a C exception handler runs.
I added a simple C API as well, PySignal_SetWakeupFd(fd).
- Backported a workaround for a bug in SQLite 3.2.x/3.3.x versions where a
statement recompilation with no bound parameters lead to a segfault
- Backported a fix necessary because of an SQLite API change in version
3.5.
This prevents segfaults when executing empty queries, like our test suite
does
on 32-bit systems on 64-bit systems, and vice versa. As a consequence
of the change, Random pickles created by Python 2.6 cannot be loaded
in Python 2.5.
Thomas Heller
Raymond Hettinger
Gregory P. Smith
Christian Heimes
Martin v. Löwis
Mark Dickinson
Jesus Cea
Georg Brandl
Alexandre Vassalotti
Brett Cannon
Gerhard Häring
Benjamin Peterson
Amaury Forgeot d'Arc
Skip Montanaro
Guido van Rossum
Neal Norwitz
Andrew M. Kuchling
David Wolever
Facundo Batista
Eric Smith
Hye-Shik Chang
Andrew MacIntyre
Jeffrey Yasskin
Armin Rigo