Add new functions to get the Python interpreter behavior:
* _PyPreConfig_InitPythonConfig()
* _PyCoreConfig_InitPythonConfig()
Add new functions to get an isolated configuration:
* _PyPreConfig_InitIsolatedConfig()
* _PyCoreConfig_InitIsolatedConfig()
Replace _PyPreConfig_INIT and _PyCoreConfig_INIT with new functions
_PyPreConfig_Init() and _PyCoreConfig_Init().
_PyCoreConfig: set configure_c_stdio and parse_argv to 0 by default
to behave as Python 3.6 in the default configuration.
_PyCoreConfig_Read() no longer sets coerce_c_locale_warn to 1 if it's
equal to 0. coerce_c_locale_warn must now be set to -1 (ex: using
_PyCoreConfig_InitPythonConfig()) to enable C locale coercion
warning.
Add unit tests for _PyCoreConfig_InitPythonConfig()
and _PyCoreConfig_InitIsolatedConfig().
Changes:
* Rename _PyCoreConfig_GetCoreConfig() to _PyPreConfig_GetCoreConfig()
* Fix core_read_precmdline(): handle parse_argv=0
* Fix _Py_PreInitializeFromCoreConfig(): pass coreconfig.argv
to _Py_PreInitializeFromPyArgv(), except if parse_argv=0
* Add PyMemAllocatorName enum
* _PyPreConfig.allocator type becomes PyMemAllocatorName, instead of
char*
* Remove _PyPreConfig_Clear()
* Add _PyMem_GetAllocatorName()
* Rename _PyMem_GetAllocatorsName() to
_PyMem_GetCurrentAllocatorName()
* Remove _PyPreConfig_SetAllocator(): just call
_PyMem_SetupAllocators() directly, we don't have do reallocate the
configuration with the new allocator anymore!
* _PyPreConfig_Write() parameter becomes const, as it should be in
the first place!
* Add a private _Py_InitializeMain() function.
* Add again _PyCoreConfig._init_main.
* _Py_InitializeFromConfig() now uses _init_main to decide
if _Py_InitializeMainInterpreter() should be called.
* _PyCoreConfig: rename _frozen to pathconfig_warnings, its value is
now the opposite of Py_FrozenFlag.
* Add an unit test for _init_main=0 and _Py_InitializeMain().
* _PyCoreConfig_Read() doesn't parse nor update argv
if parse_argv is 0.
* Move path configuration fields in _PyCoreConfig.
* Add an unit test for parse_argv=0.
* Remove unused "done": label in _Py_RunMain().
We cannot use "unsigned int" for exitcode on Windows, since
Py_Main() and _Py_RunMain() always return an "int".
Changes:
* _PyPathConfig_ComputeSysPath0() now returns -1 if an exception is
raised.
* pymain_run_python() no longer uses _PyInitError but display the
exception and set exitcode to 1 in case of error.
* Fix _Py_RunMain(): return an exitcode rather than calling
exit() on pymain_run_python() failure.
* _Py_ExitInitError() no longer uses ExitProcess() on Windows, use
exit() on all platforms.
* _Py_ExitInitError() now fails with a fatal error if 'err' is not an
error not an exit.
Remove the PyEval_ReInitThreads() function from the Python C API.
It should not be called explicitly: use PyOS_AfterFork_Child()
instead.
Rename PyEval_ReInitThreads() to _PyEval_ReInitThreads() and add a
'runtime' parameter.
Add "struct _ceval_runtime_state *ceval = &_PyRuntime.ceval;" local
variables to function to better highlight the dependency on the
global variable _PyRuntime and to point directly to _PyRuntime.ceval
field rather than on the larger _PyRuntime.
Changes:
* Add _PyRuntimeState_GetThreadState(runtime) macro.
* Add _PyEval_AddPendingCall(ceval, ...) and
_PyThreadState_Swap(gilstate, ...) functions.
* _PyThreadState_GET() macro now calls
_PyRuntimeState_GetThreadState() using &_PyRuntime.
* Add 'ceval' parameter to COMPUTE_EVAL_BREAKER(),
SIGNAL_PENDING_SIGNALS(), _PyEval_SignalAsyncExc(),
_PyEval_SignalReceived() and _PyEval_FiniThreads() macros and
functions.
* Add 'tstate' parameter to call_function(), do_call_core() and
do_raise().
* Add 'runtime' parameter to _Py_CURRENTLY_FINALIZING(),
_Py_FinishPendingCalls() and _PyThreadState_DeleteExcept()
macros and functions.
* Declare 'runtime', 'tstate', 'ceval' and 'eval_breaker' variables
as constant.
Add new trashcan macros to deal with a double deallocation that could occur when the `tp_dealloc` of a subclass calls the `tp_dealloc` of a base class and that base class uses the trashcan mechanism.
Patch by Jeroen Demeyer.
If a "=" is specified a the end of an f-string expression, the f-string will evaluate to the text of the expression, followed by '=', followed by the repr of the value of the expression.
_PyCoreConfig_SetPyArgv() and _PyCoreConfig_SetWideString() now
pre-initialize Python if needed to ensure that the locale encoding is
properly configured.
* Add _Py_PreInitializeFromPyArgv() internal function.
* Add 'args' parameter to _Py_PreInitializeFromCoreConfig()
_PyCoreConfig: Change filesystem_encoding, filesystem_errors,
stdio_encoding and stdio_errors fields type from char* to wchar_t*.
Changes:
* PyInterpreterState: replace fscodec_initialized (int) with fs_codec
structure.
* Add get_error_handler_wide() and unicode_encode_utf8() helper
functions.
* Add error_handler parameter to unicode_encode_locale()
and unicode_decode_locale().
* Remove _PyCoreConfig_SetString().
* Rename _PyCoreConfig_SetWideString() to _PyCoreConfig_SetString().
* Rename _PyCoreConfig_SetWideStringFromString()
to _PyCoreConfig_DecodeLocale().
Add _Py_FORCE_UTF8_LOCALE and _Py_FORCE_UTF8_FS_ENCODING macros to
avoid factorize "#if defined(__ANDROID__) || defined(__VXWORKS__)"
and "#if defined(__APPLE__)".
Cleanup also config_init_fs_encoding().
* Remove _PyInitError.user_err field and _Py_INIT_USER_ERR() macro:
use _Py_INIT_ERR() instead. _Py_ExitInitError() now longer calls
abort() on error: exit with exit code 1 instead.
* Add _PyInitError._type private field.
* exitcode field type is now unsigned int on Windows.
* Rename prefix field to _func.
* Rename msg field to err_msg.
This commit contains the implementation of PEP570: Python positional-only parameters.
* Update Grammar/Grammar with new typedarglist and varargslist
* Regenerate grammar files
* Update and regenerate AST related files
* Update code object
* Update marshal.c
* Update compiler and symtable
* Regenerate importlib files
* Update callable objects
* Implement positional-only args logic in ceval.c
* Regenerate frozen data
* Update standard library to account for positional-only args
* Add test file for positional-only args
* Update other test files to account for positional-only args
* Add News entry
* Update inspect module and related tests
* Add _PyEval_FiniThreads2(). _PyEval_FiniThreads() now only clears
the pending lock, whereas _PyEval_FiniThreads2() destroys the GIL.
* pymain_free() now calls _PyEval_FiniThreads2().
* Py_FinalizeEx() now calls _PyEval_FiniThreads().
Py_FinalizeEx() now clears _PyRuntime.warnings variables and
_PyRuntime.exitfuncs.
Changes:
* Add _PyWarnings_Fini(): called by Py_FinalizeEx()
* call_ll_exitfuncs() now clears _PyRuntime.exitfuncs while iterating
on it (on backward order).
Release build and debug build are now ABI compatible: the Py_DEBUG
define no longer implies Py_TRACE_REFS define which introduces the
only ABI incompatibility.
A new "./configure --with-trace-refs" build option is now required to
get Py_TRACE_REFS define which adds sys.getobjects() function and
PYTHONDUMPREFS environment variable.
Changes:
* Add ./configure --with-trace-refs
* Py_DEBUG no longer implies Py_TRACE_REFS
Py_InitializeEx() now uses a runtime variable passed to subfunctions,
rather than working directly on the global variable _PyRuntime.
Add 'runtime' parameter to _PyCoreConfig_Write(), _PySys_Create(),
_PySys_InitMain(), _PyGILState_Init(),
emit_stderr_warning_for_legacy_locale() and other subfunctions.
* Add a 'runtime' variable to Py_FinalizeEx() rather than working
directly on the global variable _PyRuntime
* Add a 'runtime' parameter to _PyGC_Fini(), _PyGILState_Fini()
and call_ll_exitfuncs()
The PyOS_AfterFork_Child() function now pass a 'runtime' parameter to
subfunctions.
* Fix _PyRuntimeState_ReInitThreads(): use the correct memory allocator
* Add runtime parameter to _PyRuntimeState_ReInitThreads(),
_PyGILState_Reinit() and _PyInterpreterState_DeleteExceptMain()
* Move _PyGILState_Reinit() to the internal C API.
* Add 'runtime' parameter to _PyThreadState_Init()
* Add 'gilstate' parameter to _PyGILState_NoteThreadState()
* Move _PyThreadState_Init() and _PyThreadState_DeleteExcept()
to the internal C API.
Add a new _testinternalcapi module to test the internal C API.
Move _Py_GetConfigsAsDict() function to the internal C API:
_testembed now uses _testinternalcapi to access the function.
Change PyAPI_FUNC(type), PyAPI_DATA(type) and PyMODINIT_FUNC macros
of pyport.h when Py_BUILD_CORE_MODULE is defined.
The Py_BUILD_CORE_MODULE define must be now be used to build a C
extension as a dynamic library accessing Python internals: export the
PyInit_xxx() function in DLL exports on Windows.
Changes:
* Py_BUILD_CORE_BUILTIN and Py_BUILD_CORE_MODULE now imply
Py_BUILD_CORE directy in pyport.h.
* ceval.c compilation now fails with an error if Py_BUILD_CORE is not
defined, just to ensure that Python is build with the correct
defines.
* setup.py now compiles _pickle.c with Py_BUILD_CORE_MODULE define.
* setup.py compiles _json.c with Py_BUILD_CORE_MODULE define, rather
than Py_BUILD_CORE_BUILTIN define
* PCbuild/pythoncore.vcxproj: Add Py_BUILD_CORE_BUILTIN define.
Add a new _PyObject_CheckConsistency() function which can be used to
help debugging. The function is available in release mode.
Add a 'check_content' parameter to _PyDict_CheckConsistency().
This is effectively an un-revert of #11617 and #12024 (reverted in #12159). Portions of those were merged in other PRs (with lower risk) and this represents the remainder. Note that I found 3 different bugs in the original PRs and have fixed them here.
Modify CLEANBYTE, DEADDYTE and FORBIDDENBYTE constants: use 0xCD,
0xDD and 0xFD, rather than 0xCB, 0xBB and 0xFB, to use the same byte
patterns than Windows CRT debug malloc() and free().
Replace _PyMem_IsFreed() function with _PyMem_IsPtrFreed() inline
function. The function is now way more efficient, it became a simple
comparison on integers, rather than a short loop. It detects also
uninitialized bytes and "forbidden bytes" filled by debug hooks
on memory allocators.
Add unit tests on _PyObject_IsFreed().
bpo-36443, bpo-36202: Since Python 3.7.0, calling Py_DecodeLocale()
before Py_Initialize() produces mojibake if the LC_CTYPE locale is
coerced and/or if the UTF-8 Mode is enabled by the user
configuration. This change fix the issue by disabling LC_CTYPE
coercion and UTF-8 Mode by default. They must now be enabled
explicitly (opt-in) using the new _Py_PreInitialize() API with
_PyPreConfig.
When embedding Python, set coerce_c_locale and utf8_mode attributes
of _PyPreConfig to -1 to enable automatically these parameters
depending on the LC_CTYPE locale, environment variables and command
line arguments
Alternative: Setting Py_UTF8Mode to 1 always explicitly enables the
UTF-8 Mode.
Changes:
* _PyPreConfig_INIT now sets coerce_c_locale and utf8_mode to 0 by
default.
* _Py_InitializeFromArgs() and _Py_InitializeFromWideArgs() can now
be called with config=NULL.
* _PyCoreConfig_Write() now updates _PyRuntime.preconfig
* Remove _PyPreCmdline_Copy()
* _PyPreCmdline_Read() now accepts _PyPreConfig and _PyCoreConfig
optional configurations.
* Rename _PyPreConfig_ReadFromArgv() to _PyPreConfig_Read(). Simplify
the code.
* Calling _PyCoreConfig_Read() no longer adds the warning options
twice: don't add a warning option if it's already in the list.
* Rename _PyCoreConfig_ReadFromArgv() to _PyCoreConfig_Read().
* Rename config_from_cmdline() to _PyCoreConfig_ReadFromArgv().
* Add more assertions on _PyCoreConfig in _PyCoreConfig_Read().
* Move some functions.
* Make some config functions private.
* Make _PyPreConfig_GetEnv(), _PyCoreConfig_GetEnv() and
_PyCoreConfig_GetEnvDup() private
* _Py_get_env_flag() first parameter becomes "int use_environment"
* Add _Py_GetConfigsAsDict() function to get all configurations as a
dict.
* dump_config() of _testembed.c now dumps preconfig as a separated
key: call _Py_GetConfigsAsDict().
* Make _PyMainInterpreterConfig_AsDict() private.
* Initialize _PyPreConfig.dev_mode to -1.
* _PyPreConfig_Read(): coreconfig has the priority over preconfig.
* _PyCoreConfig_Read() now calls _PyPreCmdline_Read() internally.
* config_from_cmdline() now pass _PyPreCmdline to config_read().
* Add _PyPreCmdline_Copy().
Prepare code to move some _PyPreConfig parameters into _PyPreCmdline.
Changes:
* _PyCoreConfig_ReadFromArgv(): remove preconfig parameter,
use _PyRuntime.preconfig.
* Add _PyPreCmdline_GetPreConfig() (called by _PyPreConfig_Read()).
* Rename _PyPreCmdline_Init() to _PyPreCmdline_SetArgv()
* Factorize _Py_PreInitializeFromPreConfig() code: add
pyinit_preinit().
* _PyPreConfig_Read() now sets coerce_c_locale to 2 if it must be
coerced.
* Remove _PyCoreConfig_ReadPreConfig().
* _PyCoreConfig_Write() now copies updated preconfig into _PyRuntime.
* Add _PyRuntime.pre_initialized: set to 1 when Python
is pre-initialized
* Add _Py_PreInitialize() and _Py_PreInitializeFromPreConfig().
* _PyCoreConfig_Read() now calls _Py_PreInitialize().
* Move _PyPreConfig_GetGlobalConfig() and
_PyCoreConfig_GetGlobalConfig() calls from main.c to preconfig.c
and coreconfig.c.
At Python initialization, the current directory is no longer
prepended to sys.path if it has been removed.
Rename _PyPathConfig_ComputeArgv0() to
_PyPathConfig_ComputeSysPath0() to avoid confusion between argv[0]
and sys.path[0].
When Python is compiled with Valgrind support, release Unicode
interned strings at exit in _PyUnicode_Fini().
* Rename _Py_ReleaseInternedUnicodeStrings() to
unicode_release_interned() and make it private.
* unicode_release_interned() is now called from _PyUnicode_Fini():
it must be called with a running Python thread state for TRASHCAN,
it cannot be called from pymain_free().
* Don't display statistics on interned strings at exit anymore
Python initialization now fails if decoding pybuilddir.txt
configuration file fails at startup.
_PyPathConfig_Calculate() now reports memory allocation failure and
decoding error on decoding pybuilddir.txt content from
UTF-8/surrogateescape.
The last parameter of _Py_wreadlink(), _Py_wrealpath() and
_Py_wgetcwd() is a length, not a size: number of characters including
the trailing NUL character.
Enhance also documentation of error conditions.
Replace messy _Py_wstrlist_xxx() functions with a new clean
_PyWstrList structure and new _PyWstrList_xxx() functions.
Changes:
* Add _PyCoreConfig.use_module_search_paths to decide if
_PyCoreConfig.module_search_paths should be computed or not, to
support empty search path list.
* _PyWstrList_Clear() sets length to 0 and items to NULL, whereas
_Py_wstrlist_clear() only freed memory.
* _PyWstrList_Append() returns an int, whereas _Py_wstrlist_append()
returned _PyInitError.
* _PyWstrList uses Py_ssize_t for the length, instead of int.
* Replace (int, wchar_t**) with _PyWstrList in:
* _PyPreConfig
* _PyCoreConfig
* _PyPreCmdline
* _PyCmdline
* Replace "int orig_argv; wchar_t **orig_argv;"
with "_PyWstrList orig_argv".
* _PyCmdline and _PyPreCmdline now also copy wchar_argv.
* Rename _PyArgv_Decode() to _PyArgv_AsWstrList().
* PySys_SetArgvEx() now pass the fixed (argc, argv) to
_PyPathConfig_ComputeArgv0() (don't pass negative argc or NULL
argv).
* _PyOS_GetOpt() uses Py_ssize_t
The value is a string for string and byte literals, None otherwise.
It is 'u' for u"..." literals, 'b' for b"..." literals, '' for "..." literals.
The 'r' (raw) prefix is ignored.
Does not apply to f-strings.
This appears sufficient to make mypy capable of using the stdlib ast module instead of typed_ast (assuming a mypy patch I'm working on).
WIP: I need to make the tests pass. @ilevkivskyi @serhiy-storchaka
https://bugs.python.org/issue36280
d_initial, the first state of a particular DFA in the parser has always been initialized to 0 in the old pgen as well as the new pgen. As this value is not used and the first state of each DFA is assumed to be the first element in the array representing it, remove d_initial from the parser to reduce complexity.
The macros were working only because our usage happened to parse correctly. Changing that usage (e.g. with pointers) would break the macros. This fixes that.
This adds a `feature_version` flag to `ast.parse()` (documented) and `compile()` (hidden) that allow tweaking the parser to support older versions of the grammar. In particular if `feature_version` is 5 or 6, the hacks for the `async` and `await` keyword from PEP 492 are reinstated. (For 7 or higher, these are unconditionally treated as keywords, but they are still special tokens rather than `NAME` tokens that the parser driver recognizes.)
https://bugs.python.org/issue35975
* _PyPreConfig_Read() now sets temporarily LC_CTYPE to the user
preferred locale, as _PyPreConfig_Write() will do permanentely.
* Fix _PyCoreConfig_Clear(): clear run_xxx attributes
* _Py_SetArgcArgv() doesn't have to be exported
* _PyCoreConfig_SetGlobalConfig() no longer applies preconfig
* _PyPreConfig_Write() now reallocates the pre-configuration with the
new memory allocator.
* It is no longer needed to force the "default raw memory allocator"
to clear pre-configuration and core configuration. Simplify the
code.
* _PyPreConfig_Write() now does nothing if called after
Py_Initialize(): no longer check if the allocator is the same.
* Remove _PyMem_GetDebugAllocatorsName(): dev mode sets again
allocator to "debug".
* _PyPreConfig_Write() now sets the memory allocator.
* _PyPreConfig_Write() gets a return type: _PyInitError.
* _Py_InitializeCore() now reads and writes the pre-configuration
(set the memory allocator, configure the locale) before reading and
writing the core configuration.
The development mode now uses the effective name of the debug memory
allocator ("pymalloc_debug" or "malloc_debug"). So the name doesn't
change after setting the memory allocator.
* Move 'allocator' and 'dev_mode' fields from _PyCoreConfig
to _PyPreConfig.
* Fix InitConfigTests of test_embed: dev_mode sets allocator to
"debug", add a new tests for env vars with dev mode enabled.
* Move following fields from _PyCoreConfig to _PyPreConfig:
* coerce_c_locale
* coerce_c_locale_warn
* legacy_windows_stdio
* utf8_mode
* _PyPreConfig_ReadFromArgv() is now responsible to choose the
filesystem encoding
* _PyPreConfig_Write() now sets the LC_CTYPE locale
* Add _PyPreConfig structure
* Move 'ignored' and 'use_environment' fields from _PyCoreConfig
to _PyPreConfig
* Add a new "_PyPreConfig preconfig;" field to _PyCoreConfig
* Revert "bpo-36097: Use only public C-API in the_xxsubinterpreters module (adding as necessary). (#12003)"
This reverts commit bcfa450f21.
* Revert "bpo-33608: Simplify ceval's DISPATCH by hoisting eval_breaker ahead of time. (gh-12062)"
This reverts commit bda918bf65.
* Revert "bpo-33608: Use _Py_AddPendingCall() in _PyCrossInterpreterData_Release(). (gh-12024)"
This reverts commit b05b711a2c.
* Revert "bpo-33608: Factor out a private, per-interpreter _Py_AddPendingCall(). (GH-11617)"
This reverts commit ef4ac967e2.
Use UTF-8 as the system encoding on VxWorks.
The main reason are:
1. The locale is frequently misconfigured.
2. Missing some functions to deal with locale in VxWorks C library.
Pgen is the oldest piece of technology in the CPython repository, building it requires various #if[n]def PGEN hacks in other parts of the code and it also depends more and more on CPython internals. This commit removes the old pgen C code and replaces it for a new version implemented in pure Python. This is a modified and adapted version of lib2to3/pgen2 that can generate grammar files compatibles with the current parser.
This commit also eliminates all the #ifdef and code branches related to pgen, simplifying the code and making it more maintainable. The regen-grammar step now uses $(PYTHON_FOR_REGEN) that can be any version of the interpreter, so the new pgen code maintains compatibility with older versions of the interpreter (this also allows regenerating the grammar with the current CI solution that uses Python3.5). The new pgen Python module also makes use of the Grammar/Tokens file that holds the token specification, so is always kept in sync and avoids having to maintain duplicate token definitions.
* Add _PyCoreConfig_ReadFromArgv() function which parses command line
options: move code from main.c to coreconfig.c.
* Add _PyCoreConfig_Write() to write the new configuration: coerce
the LC_CTYPE locale, set Py_xxx global configuration variables,
etc.
* _PyCoreConfig_ReadFromArgv() now only changes the LC_CTYPE locale
temporarily. _PyCoreConfig_Write() becomes responsible to set the
LC_CTYPE locale.
* Add _Py_SetArgcArgv() and _Py_ClearArgcArgv() functions
* Rename many "pymain_xxx()" functions
* Add "const" to some function parameters
* Reorganize main.c to declare functions in the order in which they
are called.
* Move fields from _PyMain to _PyCoreConfig:
* skip_first_line
* run_command
* run_module
* run_filename
* Replace _PyMain.stdin_is_interactive with a new
stdin_is_interactive(config) function
* Rename _PyMain to _PyArgv. Add "const _PyArgv *args" field
to _PyCmdline.
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
Ensure that the main interpreter is active (in the main thread) for signal-handling operations. This is increasingly relevant as people use subinterpreters more.
https://bugs.python.org/issue35724
* bpo-1054041: Exit properly by a signal after a ^C.
An uncaught KeyboardInterrupt exception means the user pressed ^C and
our code did not handle it. Programs that install SIGINT handlers are
supposed to reraise the SIGINT signal to the SIG_DFL handler in order
to exit in a manner that their calling process can detect that they
died due to a Ctrl-C. https://www.cons.org/cracauer/sigint.html
After this change on POSIX systems
while true; do python -c 'import time; time.sleep(23)'; done
can be stopped via a simple Ctrl-C instead of the shell infinitely
restarting a new python process.
What to do on Windows, or if anything needs to be done there has not
yet been determined. That belongs in its own PR.
TODO(gpshead): A unittest for this behavior is still needed.
* Do the unhandled ^C check after pymain_free.
* Return STATUS_CONTROL_C_EXIT on Windows.
* Fix ifdef around unistd.h include.
* 📜🤖 Added by blurb_it.
* Add STATUS_CTRL_C_EXIT to the os module on Windows
* Add unittests.
* Don't send CTRL_C_EVENT in the Windows test.
It was causing CI systems to bail out of the entire test suite.
See https://dev.azure.com/Python/cpython/_build/results?buildId=37980
for example.
* Correct posix test (fail on macOS?) check.
* STATUS_CONTROL_C_EXIT must be unsigned.
* Improve the error message.
* test typo :)
* Skip if the bash version is too old.
...and rename the windows test to reflect what it does.
* min bash version is 4.4, detect no bash.
* restore a blank line i didn't mean to delete.
* PyErr_Occurred() before the Py_DECREF(co);
* Don't add os.STATUS_CONTROL_C_EXIT as a constant.
* Update the Windows test comment.
* Refactor common logic into a run_eval_code_obj fn.
* Add tokenization of :=
- Add token to Include/token.h. Add token to documentation in Doc/library/token.rst.
- Run `./python Lib/token.py` to regenerate Lib/token.py.
- Update Parser/tokenizer.c: add case to handle `:=`.
* Add initial usage of := in grammar.
* Update Python.asdl to match the grammar updates. Regenerated Include/Python-ast.h and Python/Python-ast.c
* Update AST and compiler files in Python/ast.c and Python/compile.c. Basic functionality, this isn't scoped properly
* Regenerate Lib/symbol.py using `./python Lib/symbol.py`
* Tests - Fix failing tests in test_parser.py due to changes in token numbers for internal representation
* Tests - Add simple test for := token
* Tests - Add simple tests for named expressions using expr and suite
* Tests - Update number of levels for nested expressions to prevent stack overflow
* Update symbol table to handle NamedExpr
* Update Grammar to allow assignment expressions in if statements.
Regenerate Python/graminit.c accordingly using `make regen-grammar`
* Tests - Add additional tests for named expressions in RoundtripLegalSyntaxTestCase, based on examples and information directly from PEP 572
Note: failing tests are currently commented out (4 out of 24 tests currently fail)
* Tests - Add temporary syntax test failure tests in test_parser.py
Note: There is an outstanding TODO for this -- syntax tests need to be
moved to a different file (presumably test_syntax.py), but this is
covering what needs to be tested at the moment, and it's more convenient
to run a single test for the time being
* Add support for allowing assignment expressions as function argument annotations. Uncomment tests for these cases because they all pass now!
* Tests - Move existing syntax tests out of test_parser.py and into test_named_expressions.py. Refactor syntax tests to use unittest
* Add TargetScopeError exception to extend SyntaxError
Note: This simply creates the TargetScopeError exception, it is not yet
used anywhere
* Tests - Update tests per PEP 572
Continue refactoring test suite:
The named expression test suite now checks for any invalid cases that
throw exceptions (no longer limited to SyntaxErrors), assignment tests
to ensure that variables are properly assigned, and scope tests to
ensure that variable availability and values are correct
Note:
- There are still tests that are marked to skip, as they are not yet
implemented
- There are approximately 300 lines of the PEP that have not yet been
addressed, though these may be deferred
* Documentation - Small updates to XXX/todo comments
- Remove XXX from child description in ast.c
- Add comment with number of previously supported nested expressions for
3.7.X in test_parser.py
* Fix assert in seq_for_testlist()
* Cleanup - Denote "Not implemented -- No keyword args" on failing test case. Fix PEP8 error for blank lines at beginning of test classes in test_parser.py
* Tests - Wrap all file opens in `with...as` to ensure files are closed
* WIP: handle f(a := 1)
* Tests and Cleanup - No longer skips keyword arg test. Keyword arg test now uses a simpler test case and does not rely on an external file. Remove print statements from ast.c
* Tests - Refactor last remaining test case that relied on on external file to use a simpler test case without the dependency
* Tests - Add better description of remaning skipped tests. Add test checking scope when using assignment expression in a function argument
* Tests - Add test for nested comprehension, testing value and scope. Fix variable name in skipped comprehension scope test
* Handle restriction of LHS for named expressions - can only assign to LHS of type NAME. Specifically, restrict assignment to tuples
This adds an alternative set_context specifically for named expressions,
set_namedexpr_context. Thus, context is now set differently for standard
assignment versus assignment for named expressions in order to handle
restrictions.
* Tests - Update negative test case for assigning to lambda to match new error message. Add negative test case for assigning to tuple
* Tests - Reorder test cases to group invalid syntax cases and named assignment target errors
* Tests - Update test case for named expression in function argument - check that result and variable are set correctly
* Todo - Add todo for TargetScopeError based on Guido's comment (2b3acd37bd (r30472562))
* Tests - Add named expression tests for assignment operator in function arguments
Note: One of two tests are skipped, as function arguments are currently treating
an assignment expression inside of parenthesis as one child, which does
not properly catch the named expression, nor does it count arguments
properly
* Add NamedStore to expr_context. Regenerate related code with `make regen-ast`
* Add usage of NamedStore to ast_for_named_expr in ast.c. Update occurances of checking for Store to also handle NamedStore where appropriate
* Add ste_comprehension to _symtable_entry to track if the namespace is a comprehension. Initialize ste_comprehension to 0. Set set_comprehension to 1 in symtable_handle_comprehension
* s/symtable_add_def/symtable_add_def_helper. Add symtable_add_def to handle grabbing st->st_cur and passing it to symtable_add_def_helper. This now allows us to call the original code from symtable_add_def by instead calling symtable_add_def_helper with a different ste.
* Refactor symtable_record_directive to take lineno and col_offset as arguments instead of stmt_ty. This allows symtable_record_directive to be used for stmt_ty and expr_ty
* Handle elevating scope for named expressions in comprehensions.
* Handle error for usage of named expression inside a class block
* Tests - No longer skip scope tests. Add additional scope tests
* Cleanup - Update error message for named expression within a comprehension within a class. Update comments. Add assert for symtable_extend_namedexpr_scope to validate that we always find at least a ModuleScope if we don't find a Class or FunctionScope
* Cleanup - Add missing case for NamedStore in expr_context_name. Remove unused var in set_namedexpr_content
* Refactor - Consolidate set_context and set_namedexpr_context to reduce duplicated code. Special cases for named expressions are handled by checking if ctx is NamedStore
* Cleanup - Add additional use cases for ast_for_namedexpr in usage comment. Fix multiple blank lines in test_named_expressions
* Tests - Remove unnecessary test case. Renumber test case function names
* Remove TargetScopeError for now. Will add back if needed
* Cleanup - Small comment nit for consistency
* Handle positional argument check with named expression
* Add TargetScopeError exception definition. Add documentation for TargetScopeError in c-api docs. Throw TargetScopeError instead of SyntaxError when using a named expression in a comprehension within a class scope
* Increase stack size for parser by 200. This is a minimal change (approx. 5kb) and should not have an impact on any systems. Update parser test to allow 99 nested levels again
* Add TargetScopeError to exception_hierarchy.txt for test_baseexception.py_
* Tests - Major update for named expression tests, both in test_named_expressions and test_parser
- Add test for TargetScopeError
- Add tests for named expressions in comprehension scope and edge cases
- Add tests for named expressions in function arguments (declarations
and call sites)
- Reorganize tests to group them more logically
* Cleanup - Remove unnecessary comment
* Cleanup - Comment nitpicks
* Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)
- Add check for LHS types to detect a parenthesis then a name (see note)
- Add test for this scenario
- Update tests for changed error message for named assignment to a tuple
(also, see note)
Note: This caused issues with the previous error handling for named assignment
to a LHS that contained an expression, such as a tuple. Thus, the check
for the LHS of a named expression must be changed to be more specific if
we wish to maintain the previous error messages
* Cleanup - Wrap lines more strictly in test file
* Revert "Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)"
This reverts commit f1531400ca7d7a2d148830c8ac703f041740896d.
* Add NEWS.d entry
* Tests - Fix error in test_pickle.test_exceptions by adding TargetScopeError to list of exceptions
* Tests - Update error message tests to reflect improved messaging convention (s/can't/cannot)
* Remove cases that cannot be reached in compile.c. Small linting update.
* Update Grammar/Tokens to add COLONEQUAL. Regenerate all files
* Update TargetScopeError PRE_INIT and POST_INIT, as this was purposefully left out when fixing rebase conflicts
* Add NamedStore back and regenerate files
* Pass along line number and end col info for named expression
* Simplify News entry
* Fix compiler warning and explicity mark fallthrough
* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
Py_FatalError().
* Misc code cleanup
* The PyByteArray_Init() and PyByteArray_Fini() functions have been
removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
excluded from the limited API (stable ABI), and were not
documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
Include/cpython/pylifecycle.h to
Include/internal/pycore_pylifecycle.h. Replace
"PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
when done. Rewrite macros to make them look more like statement:
add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
calling Py_FatalError().
The majority of this PR is tediously passing `end_lineno` and `end_col_offset` everywhere. Here are non-trivial points:
* It is not possible to reconstruct end positions in AST "on the fly", some information is lost after an AST node is constructed, so we need two more attributes for every AST node `end_lineno` and `end_col_offset`.
* I add end position information to both CST and AST. Although it may be technically possible to avoid adding end positions to CST, the code becomes more cumbersome and less efficient.
* Since the end position is not known for non-leaf CST nodes while the next token is added, this requires a bit of extra care (see `_PyNode_FinalizeEndPos`). Unless I made some mistake, the algorithm should be linear.
* For statements, I "trim" the end position of suites to not include the terminal newlines and dedent (this seems to be what people would expect), for example in
```python
class C:
pass
pass
```
the end line and end column for the class definition is (2, 8).
* For `end_col_offset` I use the common Python convention for indexing, for example for `pass` the `end_col_offset` is 4 (not 3), so that `[0:4]` gives one the source code that corresponds to the node.
* I added a helper function `ast.get_source_segment()`, to get source text segment corresponding to a given AST node. It is also useful for testing.
An (inevitable) downside of this PR is that AST now takes almost 25% more memory. I think however it is probably justified by the benefits.
* Disable x87 control word for non-x86 targets
On msvc, x87 control word is only available on x86 target. Need to disable it for other targets to prevent compiling problems.
* Include immintrin.h on x86 and x64 only
Immintrin.h is only available on x86 and x64. Need to disable it for other targets to prevent compiling problems.
This change separates the signal handling trigger in the eval loop from the "pending calls" machinery. There is no semantic change and the difference in performance is insignificant.
The change makes both components less confusing. It also eliminates the risk of changes to the pending calls affecting signal handling. This is particularly relevant for some upcoming pending calls changes I have in the works.
Use crypt_r() when available instead of crypt() in the crypt module.
As a nice side effect: This also avoids a memory sanitizer flake as clang msan doesn't know about crypt's internal libc allocated buffer.
"Include/token.h", "Lib/token.py" (containing now some data moved from
"Lib/tokenize.py") and new files "Parser/token.c" (containing the code
moved from "Parser/tokenizer.c") and "Doc/library/token-list.inc" (included
in "Doc/library/token.rst") are now generated from "Grammar/Tokens" by
"Tools/scripts/generate_token.py". The script overwrites files only if
needed and can be used on the read-only sources tree.
"Lib/symbol.py" is now generated by "Tools/scripts/generate_symbol_py.py"
instead of been executable itself.
Added new make targets "regen-token" and "regen-symbol" which are now
dependencies of "regen-all".
The documentation contains now strings for operators and punctuation tokens.
Move tupleobject.h code surrounded by "#ifndef Py_LIMITED_API"
to a new Include/cpython/tupleobject.h header file.
Add cpython/ header files to Makefile.pre.in and pythoncore project
of PCbuild.
Fix the following clang warning:
Include/cpython/pystate.h:217:3: warning: redefinition of
typedef 'PyThreadState' is a C11 feature [-Wtypedef-redefinition]
* Move dictobject.h code surrounded by "#ifndef Py_LIMITED_API"
to a new Include/cpython/dictobject.h header file.
* Add PyAPI_FUNC() to _PyDictView_New().
* Reorganize dictobject.h: move views and iterators at the end.
* Move object.h code surrounded by "#ifndef Py_LIMITED_API"
to a new Include/cpython/object.h header file.
* "typedef struct _typeobject PyTypeObject;" is now always defined
in object.h, but if Py_LIMITED_API is not defined,
Include/cpython/object.h also defines the structure.
* Complete the printfunc comment to mention Py_LIMITED_API define.
Fix str.format(), float.__format__() and complex.__format__() methods
for non-ASCII decimal point when using the "n" formatter.
Changes:
* Rewrite _PyUnicode_InsertThousandsGrouping(): it now requires
a _PyUnicodeWriter object for the buffer and a Python str object
for digits.
* Rename FILL() macro to unicode_fill(), convert it to static inline function,
add "assert(0 <= start);" and rework its code.
Add "assert(PyTuple_Check(op));" to _PyTuple_CAST() to check that the
argument is a tuple object in debug mode.
PyTuple_GET_SIZE() now uses _PyTuple_CAST() to get its assertion.
Include/*.h should be the "portable Python API", whereas
Include/cpython/*.h should be the "CPython API": CPython
implementation details.
Changes:
* Create Include/cpython/ subdirectory
* "make install" now creates $prefix/include/cpython and copy
Include/cpython/* to $prefix/include/cpython
* Create Include/cpython/objimpl.h: move objimpl.h code
surrounded by "#ifndef Py_LIMITED_API" to cpython/objimpl.h.
* objimpl.h now includes cpython/objimpl.h
* Windows installer (MSI) now also install Include/ subdirectories:
Include/cpython/ and Include/internal/.
bpo-34523, bpo-35290: C locale coercion now resets the Python
internal "force ASCII" mode. This change fix the filesystem encoding
on FreeBSD CURRENT, which has a new "C.UTF-8" locale, when
the UTF-8 mode is disabled.
Add _Py_ResetForceASCII(): _Py_SetLocaleFromEnv() now calls it.
When iterating using asdl_seq_LEN(), use 'Py_ssize_t' type instead of
'int' for the iterator variable, to avoid downcast on 64-bit platforms.
_Py_asdl_int_seq_new() now also ensures that the index is greater than
or equal to 0.
* Add _PyObject_ASSERT_FROM() and _PyObject_ASSERT_FAILED_MSG()
macros.
* PyObject_GC_Track() now calls _PyObject_ASSERT_FAILED_MSG(),
instead of Py_FatalError(), if the object is already tracked, to
dump more information on error.
* _PyObject_GC_TRACK() no longer checks if the object is already
tracked at runtime, use an assertion instead for best performances;
PyObject_GC_Track() still checks at runtime.
* pycore_object.h now includes pycore_pystate.h.
* Convert _PyObject_GC_TRACK() and _PyObject_GC_UNTRACK() macros to
inline functions.
Partially revert commit 1a6be91e6f,
move back PyGC API from the internal API to the C API:
* _PyGCHead_NEXT(g), _PyGCHead_SET_NEXT(g, p)
* _PyGCHead_PREV(g), _PyGCHead_SET_PREV(g, p)
* _PyGCHead_FINALIZED(g), _PyGCHead_SET_FINALIZED(g)
* _PyGC_FINALIZED(o), _PyGC_SET_FINALIZED(o)
* _PyGC_PREV_MASK_FINALIZED
* _PyGC_PREV_MASK_COLLECTING
* _PyGC_PREV_SHIFT
* _PyGC_PREV_MASK
_PyObject_GC_TRACK(o) and _PyObject_GC_UNTRACK(o) remain in the
internal API.
locale.localeconv() now sets temporarily the LC_CTYPE locale to the
LC_MONETARY locale if the two locales are different and monetary
strings are non-ASCII. This temporary change affects other threads.
Changes:
* locale.localeconv() can now set LC_CTYPE to LC_MONETARY to decode
monetary fields.
* Add LocaleInfo.grouping_buffer: copy localeconv() grouping string
since it can be replaced anytime if a different thread calls
localeconv().
* _Py_GetLocaleconvNumeric() now requires a "struct lconv *"
structure, so locale.localeconv() now longer calls localeconv()
twice. Moreover, the function now requires all arguments to be
non-NULL.
* Rename STATIC_LOCALE_INFO_INIT to LocaleInfo_STATIC_INIT.
* Move _Py_GetLocaleconvNumeric() definition from fileutils.h
to pycore_fileutils.h. pycore_fileutils.h now includes locale.h.
* The _locale module is now built with Py_BUILD_CORE defined.
test_embed.InitConfigTests tests more configuration variables.
Changes:
* InitConfigTests tests more core configuration variables:
* base_exec_prefix
* base_prefix
* exec_prefix
* home
* legacy_windows_fs_encoding
* legacy_windows_stdio
* module_search_path_env
* prefix
* "_testembed init_from_config" tests more variables:
* argv
* warnoptions
* xoptions
* InitConfigTests: add check_global_config(), check_core_config() and
check_main_config() subfunctions to cleanup the code. Move also
constants at the class level (ex: COPY_MAIN_CONFIG).
* Fix _PyCoreConfig_AsDict(): don't set stdio_encoding twice
* Use more macros in _PyCoreConfig_AsDict() and
_PyMainInterpreterConfig_AsDict() to reduce code duplication.
* Other minor cleanups.
* Fix _PyCoreConfig_SetGlobalConfig(): set also Py_FrozenFlag
* Fix _PyCoreConfig_AsDict(): export also xoptions
* Add _Py_GetGlobalVariablesAsDict() and _testcapi.get_global_config()
* test.pythoninfo: dump also global configuration variables
* _testembed now serializes global, core and main configurations
using JSON to reuse _Py_GetGlobalVariablesAsDict(),
_PyCoreConfig_AsDict() and _PyMainInterpreterConfig_AsDict(),
rather than duplicating code.
* test_embed.InitConfigTests now test much more configuration
variables
* Fix _PyMainInterpreterConfig_Copy():
copy 'install_signal_handlers' attribute
* Add _PyMainInterpreterConfig_AsDict()
* Add unit tests on the main interpreter configuration
to test_embed.InitConfigTests
* test.pythoninfo: log also main_config
Datetime macros like PyDate_Check() have two implementations, one using
the C API capsule and one using direct access to the datetime type
symbols defined in _datetimemodule.c. Since the direct access versions
of the macros are only used in _datetimemodule.c, they have been moved
out of "datetime.h" and into _datetimemodule.c.
The _PY_DATETIME_IMPL macro is currently necessary in order to avoid
both duplicate definitions of these macros in _datetimemodule.c and
unnecessary declarations of C API capsule-related macros and varibles in
datetime.h.
Co-Authored-By: Victor Stinner <vstinner@redhat.com>
Adds configure flags for msan and ubsan builds to make it easier to enable.
These also encode the detail that address sanitizer and memory sanitizer
should disable pymalloc.
Define MEMORY_SANITIZER when appropriate at build time and adds workarounds
to existing code to mark things as initialized where the sanitizer is otherwise unable to
determine that. This lets our build succeed under the memory sanitizer. not all tests
pass without sanitizer failures yet but we're in pretty good shape after this.
* ast.h now includes Python-ast.h and node.h
* parsetok.h now includes node.h and grammar.h
* symtable.h now includes Python-ast.h
* Modify asdl_c.py to enhance Python-ast.h:
* Add #ifndef/#define Py_PYTHON_AST_H to be able to include the header
twice
* Add "extern { ... }" for C++
* Undefine "Yield" macro conflicting with winbase.h
* Remove "#undef Yield" from C files, it's now done in Python-ast.h
* Remove now useless includes in C files
* _PyTuple_ITEMS() gives access to the tuple->ob_item field and cast the
first argument to PyTupleObject*. This internal macro is only usable if
Py_BUILD_CORE is defined.
* Replace &PyTuple_GET_ITEM(ob, 0) with _PyTuple_ITEMS(ob).
* Replace PyTuple_GET_ITEM(op, 1) with &_PyTuple_ITEMS(ob)[1].
* All internal header files now require Py_BUILD_CORE or
Py_BUILD_CORE_BUILTIN to be defined.
* _json.c is now compiled with Py_BUILD_CORE_BUILTIN to access
pycore_accu.h header.
* Add an example to Modules/Setup to show how to build _json
as a built-in module; it requires non trivial compiler options.
_testcapimodule.c must not include pycore_pathconfig.h, since it's an
internal header files.
Changes:
* Add _PyCoreConfig_AsDict() function to coreconfig.c.
* Remove pycore_pathconfig.h include from _testcapimodule.h.
* pycore_pathconfig.h now requires Py_BUILD_CORE to be defined.
* _testcapimodule.c compilation now fails if it's built with
Py_BUILD_CORE defined.
* And pycore_lifecycle.h and pycore_pathconfig.h headers to
Include/internal/
* Move Py_BUILD_CORE specific code from coreconfig.h and
pylifecycle.h to pycore_pathconfig.h and pycore_lifecycle.h
* Move _Py_wstrlist_XXX() definitions and _PyPathConfig code
from pycore_state.h to pycore_pathconfig.h
* Move "Init" and "Fini" function definitions from pylifecycle.c to
pycore_lifecycle.h.
The accu.h header is no longer part of the Python C API: it has been
moved to the "internal" headers which are restricted to Python
itself.
Replace #include "accu.h" with #include "pycore_accu.h".
If Py_BUILD_CORE is defined, the PyThreadState_GET() macro access
_PyRuntime which comes from the internal pycore_state.h header.
Public headers must not require internal headers.
Move PyThreadState_GET() and _PyInterpreterState_GET_UNSAFE() from
Include/pystate.h to Include/internal/pycore_state.h, and rename
PyThreadState_GET() to _PyThreadState_GET() there.
The PyThreadState_GET() macro of pystate.h is now redefined when
pycore_state.h is included, to use the fast _PyThreadState_GET().
Changes:
* Add _PyThreadState_GET() macro
* Replace "PyThreadState_GET()->interp" with
_PyInterpreterState_GET_UNSAFE()
* Replace PyThreadState_GET() with _PyThreadState_GET() in internal C
files (compiled with Py_BUILD_CORE defined), but keep
PyThreadState_GET() in the public header files.
* _testcapimodule.c: replace PyThreadState_GET() with
PyThreadState_Get(); the module is not compiled with Py_BUILD_CORE
defined.
* pycore_state.h now requires Py_BUILD_CORE to be defined.
* Remove _PyThreadState_Current
* Replace GET_TSTATE() with PyThreadState_GET()
* Replace GET_INTERP_STATE() with _PyInterpreterState_GET_UNSAFE()
* Replace direct access to _PyThreadState_Current with
PyThreadState_GET()
* Replace _PyThreadState_Current with
_PyRuntime.gilstate.tstate_current
* Rename SET_TSTATE() to _PyThreadState_SET(), name more
consistent with _PyThreadState_GET()
* Update outdated comments
Make _PySys_AddXOptionWithError() and _PySys_AddWarnOptionWithError()
functions private again. They are no longer needed to initialize Python:
_PySys_EndInit() is now responsible to add these options instead.
Moreover, PySys_AddWarnOptionUnicode() now clears the exception on
failure if possible.
* bpo-34523, bpo-34403: Fix config_init_fs_encoding(): it now uses
ASCII if _Py_GetForceASCII() is true.
* Fix a regression of commit b2457efc78.
* Fix also a memory leak: get_locale_encoding() already allocates
memory, no need to duplicate the string.
Configuring python with ./configure --with-pydebug CFLAGS="-D COUNT_ALLOCS -O0"
makes "make smelly" fail as some symbols were being exported without the "Py_" or
"_Py" prefixes.
* Convert PyObject_INIT() and PyObject_INIT_VAR() macros to static
inline functions.
* Fix usage of these functions: cast to PyObject* or PyVarObject*.
_PyTraceMalloc_NewReference() is now called by _Py_NewReference(), so
move its definition to object.h. Moreover, define it even if
Py_LIMITED_API is defined, since _Py_NewReference() is also exposed
even if Py_LIMITED_API is defined.
Changes:
* Add _PyObject_AssertFailed() function.
* Add _PyObject_ASSERT() and _PyObject_ASSERT_WITH_MSG() macros.
* gc_decref(): replace assert() with _PyObject_ASSERT_WITH_MSG() to
dump the faulty object if the assertion fails.
_PyObject_AssertFailed() calls:
* _PyMem_DumpTraceback(): try to log the traceback where the object
memory has been allocated if tracemalloc is enabled.
* _PyObject_Dump(): log repr(obj).
* Py_FatalError(): log the current Python traceback.
_PyObject_AssertFailed() uses _PyObject_IsFreed() heuristic to check
if the object memory has been freed by a debug hook on Python memory
allocators.
Initial patch written by David Malcolm.
Co-Authored-By: David Malcolm <dmalcolm@redhat.com>
* Add Py_STATIC_INLINE() macro to declare a "static inline" function.
If the compiler supports it, try to always inline the function even if no
optimization level was specified.
* Modify pydtrace.h to use Py_STATIC_INLINE() when WITH_DTRACE is
not defined.
* Add an unit test on Py_DECREF() to make sure that
_Py_NegativeRefcount() reports the correct filename.
* Modify object.h to ensure that pymem.h is included,
to get _Py_tracemalloc_config variable.
* Move _PyTraceMalloc_XXX() functions to tracemalloc.h,
they need PyObject type. Break circular dependency between pymem.h
and object.h.
Victor Stinner
Jake Tesler
Eric Snow
Jeroen Demeyer
Eric V. Smith
Łukasz Langa
Victor Stinner
Pablo Galindo
Inada Naoki
tyomitch
Steve Dower
Paul Monson
Dmitry Marakasov
Eddie Elizondo
Rémi Lapeyre
Serhiy Storchaka
Guido van Rossum
Jeremy Kloth
pxinwr
Sergey Fedoseev
Gregory P. Smith
Emily Morehouse
Ivan Levkivskyi
Minmin Gong
Arthur Neufeld
INADA Naoki
Paul Ganssle
Alexey Izbyshev