The bsddb subproject is gone.
The _bsddb subproject is new.
There are problems here, but I'm out of time to work on this now. If
anyone can address an XXX comment or two in readme.txt, please do!
Already supported dict() and dict(mapping).
Now supports dict(itemsequence) and
Just van Rossum's new syntax for dict(keywordargs).
Also, added related unittests.
The docs already promise dict-like behavior
so no update is needed there.
Replaced docstring with comments. Prevents subclass contamination.
Added the missing __cmp__() method and a test for __cmp__().
Used try/except style in preference to has_key() followed by a look-up.
Used iteritem() where possible to save creating a long key list and
to save redundant lookups.
Expanded .update() to look for the most helpful methods first and gradually
work down to a mininum expected interface.
Expanded documentation to be more clear on how to use the class.
When mwh added extended slicing, strings and unicode became mappings.
Thus, dict was set which prevented an error when doing:
newstr = 'format without a percent' % string_value
This fix raises an exception again when there are no formats
and % with a string value.
Armin Rigo's Draconian but effective fix for
SF bug 453523: list.sort crasher
slightly fiddled to catch more cases of list mutation. The dreaded
internal "immutable list type" is gone! OTOH, if you look at a list
*while* it's being sorted now, it will appear to be empty. Better
than a core dump.
figure out what the code was doing. The fixes were a combination of
closing open files before deletion, opening files in binary mode, and
plain skipping things that can't work on Windows (BaseTest.decompress
uses a process gimmick that doesn't exist on Windows, and, even if it
did, assumes a "bunzip2" executable is on PATH).
The _update method detected mutable elements by trapping TypeErrors.
Unfortunately, this masked useful TypeErrors raised by the iterable
itself. For cases where it is possible for an iterable to raise
a TypeError, the iterable is pre-converted to a list outside the
try/except so that any TypeErrors propagate through.
from Greg Chapman.
* Modules/_sre.c
(lastmark_restore): New function, implementing algorithm to restore
a state to a given lastmark. In addition to the similar algorithm used
in a few places of SRE_MATCH, restore lastindex when restoring lastmark.
(SRE_MATCH): Replace lastmark inline restoring by lastmark_restore(),
function. Also include it where missing. In SRE_OP_MARK, set lastindex
only if i > lastmark.
* Lib/test/re_tests.py
* Lib/test/test_sre.py
Included regression tests for the fixed bugs.
* Misc/NEWS
Mention fixes.
/* this is harder to get right than you might think */
angered some God somewhere. After noticing
>>> range(5000000)[slice(96360, None, 439)]
[]
I found that my cute test for the slice being empty failed due to
overflow. Fixed, and added simple test (not the above!).
bug #596434. (Alas, I don't think this completely covers that bug.)
Remove 'wrapper' argument from BaseTestCase.check_split() -- it's not
actually needed.
Since properties are supported here, is possible that
instance_getattr2() raises an exception. Fix all code that made this
assumption.
Backport candidate.
classes was called with three arguments. This makes no sense, there's
no way to pass in the "modulo" 3rd argument as for __pow__, and
classic classes don't do this. [SF bug 620179]
I don't want to backport this to 2.2.2, because it could break
existing code that has developed a work-around. Code in 2.2.2 that
wants to use __ipow__ and wants to be forward compatible with 2.3
should be written like this:
def __ipow__(self, exponent, modulo=None):
...
initializing GNU readline, setlocale(LC_CTYPE, "") is called, which
changes the <ctype.h> macros to use the "default" locale (which isn't
the *initial* locale -- the initial locale is the "C" locale in which
only ASCII characters are printable). When the default locale is e.g.
Latin-1, the repr() of string objects can include 8-bit characters
with the high bit set; I believe this is due to the recent
PRINT_MULTIBYTE_STRING changes to stringobject.c. This in turn screws
up test_pyexpat and test_rotor, which depend on the repr() of 8-bit
strings with high bit characters.
The solution (for now) is to force the LC_CTYPE locale to "C" after
importing rlcompleter. This is the locale required by the test suite
anyway.
ths "should be" skipped depends on os.path.supports_unicode_filenames,
not really on the platform. Fiddled the expected-skip constructor
appropriately.
list(xrange(sys.maxint / 4))
test. Changed 4 to 2.
The belief is that this test intended to trigger a bit of code in
listobject.c's NRESIZE macro that's looking for arithmetic overflow. As
written, it doesn't achieve that, though, and leaves it up to the platform
realloc() as to whether it wants to allocate 2 gigabytes. Some platforms
say "sure!", although they don't appear to mean it, and disaster ensues.
Changing 4 to 2 (just barely) manages to trigger the arithmetic overflow
test instead, leaving the platform realloc() out of it.
I'll backport this to the 2.2 branch next.
sys.getwindowsversion() on Windows (new enahanced Tim-proof <wink>
version), and fix test_pep277.py in a few minor ways.
Including doc and NEWS entries.
patch #617312, both on the trunk and the 22-maint branch.
Also added a test case, and ported the test_trace I wrote for HEAD
to 2.2.2 (with all those horrible extra 'line' events ;-).
A possibility to deadlock (on the hidden import lock) was created here
in 2.3, seemingly when tempfile.py started to call functions in
random.py. The cure is "the usual": don't spawn threads as a side
effect of importing, when the spawned threads themselves do imports
(directly or indirectly), and the code that spawned the threads is
waiting for the threads to finish (they can't finish, because they're
waiting for the import lock the spawner still holds). Worming around
this is why the "test_main" mechanism was introduced in regrest, so
it's a straightforward fix.
NOT a bugfix candidate; the problem was introduced in 2.3.
module used in the Zope TAL implementation. The bug was already fixed
in the Python standard library, but the regression test would be good
to keep around.
Because ob_size is a 32-bit int but sys.maxint is LONG_MAX which is a
64-bit value, there's no way to make this test succeed on a 64-bit
platform. So just skip it when sys.maxint isn't 0x7fffffff.
Backport candidate.
exception occurred so it should only be closed in the else clause.
Without this change we can an UnboundLocalError on Linux:
Traceback (most recent call last):
File "Lib/test/test_mmap.py", line 304, in ?
test_both()
File "Lib/test/test_mmap.py", line 208, in test_both
m.close()
UnboundLocalError: local variable 'm' referenced before assignment
with a size larger than the underlying file worked on Windows. It
does <wink>. However, merely creating an mmap that way has the side
effect of growing the file on disk to match the specified size. A
*later* test assumed that the file on disk was still exactly as it was
before the new "size too big" test was added, but that's no longer true.
So added a hack at the end of the "size too big" test to truncate the
disk file back to its original size on Windows.
Unicode strings (with arbitrary length) are allowed
as entries in the unicode.translate mapping.
Add a test case for multicharacter replacements.
(Multicharacter replacements were enabled by the
PEP 293 patch)
to fix it. (It fails when the day of the month is a 1-digit number,
because %c produces space+digit there, while strptime seems to expect
zero+digit somehow.)
of PyString_DecodeEscape(). This prevents a call to
_PyString_Resize() for the empty string, which would
result in a PyErr_BadInternalCall(), because the
empty string has more than one reference.
This closes SF bug http://www.python.org/sf/603937
Use a slightly different strategy to determine when not to call the line
trace function. This removes the need for the RETURN_NONE opcode, so
that's gone again. Update docs and comments to match.
Thanks to Neal and Armin!
Also add a test suite. This should have come with the original patch...
localtime, which in -0400 is 12 noon GMT. The bug boiled down to
broken conversion of 12 PM to hour 12 for the '%I %p' format string.
Added a test for this specific condition: Strptime12AMPMTests. Fix to
_strptime.py coming momentarily.
the tokenize module by test_tokenize.py. The FutureWarnings only
appeared during installation, and I've figured out a way to suppress
those in a different way.
sure these are the best fixes.
- Test maxint-1 against the negative octal constant -020000000000
- Comment out the tests for oct -1 and hex -1, since 037777777777 and
0xffffffff raise FutureWarnings now and in Python 2.4 those
constants will produce positive values, not negative values. So the
existing test seems to test something that won't be true in 2.4.
underlying dictionaries, there were no reasonable use cases (lexicographic
sorting of a list of sets is somewhat esoteric). Frees the operators
for other uses (such as strict subset and superset comparisons).
Updated documentation and test suite accordingly.
the inplace operators. The strategy is to have the operator overloading
code do the work and then to define equivalent method calls which rely on
the operators. The changes facilitate proper application of TypeError
and NonImplementedErrors.
Added corresponding tests to the test suite to make sure both the operator
and method call versions get exercised.
Add missing tests for difference_update().
wrong thing for a unicode subclass when there were zero string
replacements. The example given in the SF bug report was only one way
to trigger this; replacing a string of length >= 2 that's not found is
another. The code would actually write outside allocated memory if
replacement string was longer than the search string.
(I wonder how many more of these are lurking? The unicode code base
is full of wonders.)
Bugfix candidate; this same bug is present in 2.2.1.
base class (WrapperTestCase) instead, and call it repeatedly in the
methods that used to have a loop-over-subcases. Much simpler.
Rename perennial temp variable 't' to 'text'.
<peter@engcorp.com> based on a test script that's been kicking around my
home directory for a couple of months now and only saw the light of day
because I included it when I sent textwrap.py to python-dev for review.
Also, don't call gettempdir() in the default expression for the 'dir'
argument to various functions; use 'dir=None' for the default and
insert 'if dir is None: dir = gettemptir()' in the bodies. That way
the work done by gettempdir is postponed until needed.
[ 587993 ] SET_LINENO killer
Remove SET_LINENO. Tracing is now supported by inspecting co_lnotab.
Many sundry changes to document and adapt to this change.
binary=True
to
text=False
by BDFL Pronouncement. All other changes follow from this. The change
to the docs is ready to go, but blocked by another JackMacLock in the
doc directory.
do bizarre things to get a temp file, I changed it to use mkstemp instead
of NamedTemporaryFile. This tried to leave the file open while passing
its name to execfile(). On Win2K (but not Win9X), though, a file created
with O_TEMPORARY cannot be opened again, so the test failed with a
permission error when execfile tried to open it. Closer to the truth:
a file created with O_TEMPORARY can be opened again, but only if the
file is also created with SHARE_DELETE access via the Win32 CreateFile()
function. There's no way to get at that from MS's version of libc, though
(we'd have to ditch the "std" C file functions in favor of Win32 API
calls).
Close the bug report again -- this time for Cygwin due to a newlib bug.
See the following for the details:
http://sources.redhat.com/ml/newlib/2002/msg00369.html
Note that this commit is only a documentation (i.e., comment) change.
test was written. So boosted the number of "digits" this generates, and
also beefed up the "* / divmod" test to tickle numbers big enough to
trigger the Karatsuba algorithm. It takes about 2 seconds now on my box.
rewrite, by Zack Weinberg). This replaces most code in tempfile.py
(please review!!!) and adds extensive unit tests for it.
This will cause some warnings in the test suite; I'll check those in
soon, and also the docs.
least on OS/2 (see note on SF patch 555085 by A I MacIntyre) but
looks like the test *could* fail on any other platform too -- there's
no guarantee that recv() reads all data.
prints function and module names, which is more informative now that
we repeat some tests in slightly modified subclasses.
Add a test for read() until EOF.
Add test suites for line-buffered (bufsize==1) and a small custom
buffer size (bufsize==2).
Restructure testUnbufferedRead() somewhat to avoid a potentially
infinite loop.
and this broke a Zope "pipelining" test which read multiple responses
from the same connection (this attaches a new file object to the
socket for each response). Added a test for this too.
(I want to do some code cleanup too, but I thought I'd first fix
the problem with as little code as possible, and add a unit test
for this case. So that's what this checkin is about.)
on Windows. The test_sequence() ERROR is easily repaired if we're
willing to add an os.unlink() line to mhlib's updateline(). The
test_listfolders FAIL I gave up on -- I don't remember enough about Unix
link esoterica to recall why a link count of 2 is something a well-
written program should be keenly interested in <wink>.
Added new heapify() function, which transforms an arbitrary list into a
heap in linear time; that's a fundamental tool for using heaps in real
life <wink>.
Added heapyify() test. Added a "less naive" N-best algorithm to the test
suite, and noted that this could actually go much faster (building on
heapify()) if we had max-heaps instead of min-heaps (the iterative method
is appropriate when all the data isn't known in advance, but when it is
known in advance the tradeoffs get murkier).
at random, and replaces the elements at those positions with new random
values. I was pleasantly surprised by how fast this goes! It's hard to
conceive of an algorithm that could special-case for this effectively.
Plus it's exactly what happens if a burst of gamma rays corrupts your
sorted database on disk <wink>.
i 2**i *sort ... %sort
15 32768 0.18 ... 0.03
16 65536 0.24 ... 0.04
17 131072 0.53 ... 0.08
18 262144 1.17 ... 0.16
19 524288 2.56 ... 0.35
20 1048576 5.54 ... 0.77
and age of rampant computer breakins I imagine there are plenty of systems
with telnet disabled. Successful check of at least one getservbyname() call
is required for success
in the stability tests.
Bizarre: this takes 11x longer to run if and only if test_longexp is
run before it, on my box. The bigger REPS is in test_longexp, the
slower this gets. What happens on your box? It's not gc on my box
(which is good, because gc isn't a plausible candidate here).
The slowdown is massive in the parts of test_sort that implicitly
invoke a new-style class's __lt__ or __cmp__ methods. If I boost
REPS large enough in test_longexp, even the test_sort tests on an array
of size 64 visibly c-r-a-w-l. The relative slowdown is even worse in
a debug build. And if I reduce REPS in test_longexp, the slowdown in
test_sort goes away.
test_longexp does do horrid things to Win98's management of user
address space, but I thought I had made that a whole lot better a month
or so ago (by overallocating aggressively in the parser).
If the long is large enough, the return value will be a negative int.
In this case, calling the function a second time won't return the
original value passed in.
imports of test modules now import from the test package. Other
related oddities are also fixed (like DeprecationWarning filters that
weren't specifying the full import part, etc.). Also did a general
code cleanup to remove all "from test.test_support import *"'s. Other
from...import *'s weren't changed.
See there for a description.
Added test case.
Bugfix candidate for 2.2.x, not sure about previous versions:
probably low priority, because virtually no one runs debug builds.
imports e.g. test_support must do so using an absolute package name
such as "import test.test_support" or "from test import test_support".
This also updates the README in Lib/test, and gets rid of the
duplicate data dirctory in Lib/test/data (replaced by
Lib/email/test/data).
Now Tim and Jack can have at it. :)
array. Our samplesort special-cases the snot out of this, running about
12x faster than *sort. The experimental mergesort runs it about 8x
faster than *sort without special-casing, but should really do better
than that (when merging runs of different lengths, right now it only
does something clever about finding where the second run begins in
the first and where the first run ends in the second, and that's more
of a temp-memory optimization).
(i.e. email.test), so move the guts of them here from Lib/test. The
latter directory will retain stubs to run the email.test tests using
Python's standard regression test.
test_email_torture.py is a torture tester which will not run under
Python's test suite because I don't want to commit megs of data to
that project (it will fail cleanly there). When run under the mimelib
project it'll stress test the package with megs of message samples
collected from various locations in the wild.
version of PySlice_GetIndicesEx"):
> OK. Michael, if you want to check in indices(), go ahead.
Then I did what was needed, but didn't check it in. Here it is.
the default range to end at 2**20 (machines are much faster now).
Fixed what was quite a arguably a bug, explaining an old mystery: the
"!sort" case here contructs what *was* a quadratic-time disaster for
the old quicksort implementation. But under the current samplesort, it
always ran much faster than *sort (the random case). This never made
sense. Turns out it was because !sort was sorting an integer array,
while all the other cases sort floats; and comparing ints goes much
quicker than comparing floats in Python. After changing !sort to chew
on floats instead, it's now slower than the random sort case, which
makes more sense (but is just a few percent slower; samplesort is
massively less sensitive to "bad patterns" than quicksort).
existed at the time atexit first got imported. That's a bug, and this
fixes it.
Also reworked test_atexit.py to test for this too, and to stop using
an "expected output" file, and to test what actually happens at exit
instead of just simulating what it thinks atexit will do at exit.
Bugfix candidate, but it's messy so I'll backport to 2.2 myself.
The test of httplib makes it difficult to maintain httplib. There are
two many idioms that pyclbr doesn't seem to understand, and I don't
understand how to update these tests to make them work.
Also remove commented out test of urllib2.
takes much longer to run in the context of the test suite than when run in
isolation. That's because it forces a large number of full collections,
which take time proportional to the total number of gc'ed objects in the
whole system.
But since the dangerous implementation trickery that caused this test to
fail in 2.0, 2.1 and 2.2 doesn't exist in 2.3 anymore (the trashcan
mechanism stopped doing evil things when the possibility for compiling
without cyclic gc was taken away), such an expensive test is no longer
justified. This checkin leaves the test intact, but fiddles the
constants to reduce the runtime by about a factor of 5.
debug-build failure when an instance of a new-style class is resurrected
by a __del__ method -- we simply never had any code that tried this.
This is already fixed in 2.3 CVS. In 2.2.1, it blows up via
Fatal Python error: GC object already in linked list
I'll fix it in 2.2.1 CVS next.
.splitlines() on them, since they may be Header instances.
test_multilingual(), test_header_ctor_default_args(): New tests of
make_header() and that Header can take all default arguments.
ndiff function, so just alias it to assertEqual in that case.
Various: make sure all openfile()/read()'s are wrapped in
try/finally's so the file gets closed.
A bunch of new tests checking the corner cases for multipart/digest
and message/rfc822.
If multiple header fields with the same name occur, they are combined
according to the rules in RFC 2616 sec 4.2:
Appending each subsequent field-value to the first, each separated by
a comma. The order in which header fields with the same field-name are
received is significant to the interpretation of the combined field
value.
folding. Note that some of the Japanese tests have changed, but I
don't really know if they are correct or not. :(
Someone with Japanese and RFC 2047 expertise, please take a look!
Setting the buffer_text attribute to true causes the parser to collect
character data, waiting as long as possible to report it to the Python
callback. This can save an enormous number of callbacks from C to
Python, which can be a substantial performance improvement.
buffer_text defaults to false.
In a fresh interpreter, type.mro(tuple) would segfault, because
PyType_Ready() isn't called for tuple yet. To fix, call
PyType_Ready(type) if type->tp_dict is NULL.
They still run as standalone scripts, but when used as part of the
regression test suite, they are effectively no-ops.
(This is done by renaming test_main to main.)
473985. Through a subtle rearrangement of some members in the etype
struct (!), mapping methods are now preferred over sequence methods,
which is necessary to support str.__getitem__("hello", slice(4)) etc.
that retries the connect() call in timeout mode so it can be shared
between connect() and connect_ex(), and needs only a single #ifdef.
The test for this was doing funky stuff I don't approve of,
so I removed it in favor of a simpler test. This allowed me
to implement a simpler, "purer" form of the timeout retry code.
Hopefully that's enough (if you want to be fancy, use non-blocking
mode and decode the errors yourself, like before).
- setblocking(0) and settimeout(0) are now equivalent, and ditto for
setblocking(1) and settimeout(None).
- Don't raise an exception from internal_select(); let the final call
report the error (this means you will get an EAGAIN error instead of
an ETIMEDOUT error -- I don't care).
- Move the select to inside the Py_{BEGIN,END}_ALLOW_THREADS brackets,
so other theads can run (this was a bug in the original code).
- Redid the retry logic in connect() and connect_ex() to avoid masking
errors. This probably doesn't work for Windows yet; I'll fix that
next. It may also fail on other platforms, depending on what
retrying a connect does; I need help with this.
- Get rid of the retry logic in accept(). I don't think it was needed
at all. But I may be wrong.
This was a simple typo. Strange that the compiler didn't catch it!
Instead of WHY_CONTINUE, two tests used CONTINUE_LOOP, which isn't a
why_code at all, but an opcode; but even though 'why' is declared as
an enum, comparing it to an int is apparently not even worth a
warning -- not in gcc, and not in VC++. :-(
Will fix in 2.2 too.
[ 400998 ] experimental support for extended slicing on lists
somewhat spruced up and better tested than it was when I wrote it.
Includes docs & tests. The whatsnew section needs expanding, and arrays
should support extended slices -- later.
I've made considerable changes to Michael's code, specifically to use
the select() system call directly and to store the timeout as a C
double instead of a Python object; internally, -1.0 (or anything
negative) represents the None from the API.
I'm not 100% sure that all corner cases are covered correctly, so
please keep an eye on this. Next I'm going to try it Windows before
Tim complains.
No way is this a bugfix candidate. :-)
Straightforward fix. Will backport to 2.2. If there's ever a new 2.1
release, this could be backported there too (since it's an issue with
anything that's got both a __reduce__ and a __setstate__).
While I was at it, I added a tp_clear handler and changed the
tp_dealloc handler to use the clear_slots helper for the tp_clear
handler.
Also tightened the rules for slot names: they must now be proper
identifiers (ignoring the dirty little fact that <ctype.h> is locale
sensitive).
Also set mp->flags = READONLY for the __weakref__ pseudo-slot.
Most of this is a 2.2 bugfix candidate; I'll apply it there myself.
Change the module constructor (module_init) to have the signature
__init__(name:str, doc=None); this prevents the call from type_new()
to succeed. While we're at it, prevent repeated calling of
module_init for the same module from leaking the dict, changing the
semantics so that __dict__ is only initialized if NULL.
Also adding a unittest, test_module.py.
This is an incompatibility with 2.2, if anybody was instantiating the
module class before, their argument list was probably empty; so this
can't be backported to 2.2.x.
-f/--fromfile <filename>
option. This runs all and only the tests named in the file, in the
order given (although -x may weed that list, and -r may shuffle it).
Lines starting with '#' are ignored.
This goes a long way toward helping to automate the binary-search-like
procedure I keep reinventing by hand when a test fails due to interaction
among tests (no failure in isolation, and some unknown number of
predecessor tests need to run first -- now you can stick all the test
names in a file, and comment/uncomment blocks of lines until finding a
minimal set of predecessors).
[ 559250 ] more POSIX signal stuff
Adds support (and docs and tests and autoconfery) for posix signal
mask handling -- sigpending, sigprocmask and sigsuspend.
A MemoryError is now raised when the list cannot be created.
There is a test, but as the comment says, it really only
works for 32 bit systems. I don't know how to improve
the test for other systems (ie, 64 bit or systems
where the data size != addressable size,
e.g. 64 bit data, but 48 bit addressable memory)
instead of calling the getaddrlist() method, since the latter doesn't
work with multiple calls (it will return the empty list for the second
and subsequent calls).
Closes SF bug #555035. Include a unittest.
returned a proxy for __class__ whose __bases__ was also a proxy. The
merge_class_dict() helper for dir() assumed incorrectly that __bases__
would always be a tuple and used the in-line tuple API on the proxy.
I will backport this to 2.2 as well.
and the .seed() and .whseed() methods failed to reset it. In other
words, setting the seed didn't completely determine the sequence of
results produced by random.gauss(). It does now. Programs repeatedly
mixing calls to a seed method with calls to gauss() may see different
results now.
Bugfix candidate (random.gauss() has always been broken in this way),
despite that it may change results.
Raymond Hettinger
Walter Dörwald
Martin v. Löwis
Tim Peters
Neal Norwitz
Just van Rossum
Fred Drake
Neil Schemenauer
Guido van Rossum
Jeremy Hylton
Michael W. Hudson
Gustavo Niemeyer
Finn Bock
Greg Ward
Marc-André Lemburg
Mark Hammond
Jason Tishler
Barry Warsaw
Jack Jansen
Andrew MacIntyre
Skip Montanaro
Piers Lauder
Thomas Heller