cpython/Mac/ReadMeOrSuffer

153 lines
6.8 KiB
Plaintext
Raw Normal View History

1996-08-28 10:51:11 -03:00
How to install Python 1.4 on your Macintosh
------------------------------------------------
Even if you don't usually read readme files: please read at least the
first sections of this file, failure to do so will probably result in
an unuseable python system. If this warning is too late and you already
have an non-functional python: it is best to remove all traces and start
with a fresh distribution. Especially don't forget to remove the
"python preferences" file from the Preferences folder, and possibly
1996-08-28 10:51:11 -03:00
"PythonCore", "PythonCorePPC" and/or "PythonCoreCFM68K"
from the Extensions folder. Before you mail me for help *please*
1996-05-20 08:22:41 -03:00
try the steps above (cleaning up and re-installing): it should fix most
1996-08-28 10:51:11 -03:00
common mistakes. If you are installing a CFM68K python also check that
your installation of CFM68K was done correctly.
1996-05-20 08:22:41 -03:00
If this is your first encounter with Python: you definitely need the common
user documentation (common to all platforms). You can find this (in various
forms) on www.python.org and ftp.python.org.
1996-05-20 08:22:41 -03:00
Mac-specific documentation is included in this distribution in folder Mac:Demo.
The documentation is sparse, but it will have to serve for now. The documentation
is in HTML format, start with index.html.
If you have a pre-system 7 macintosh: sorry, this release will not work
on your system. Too many sys7 features are used to make a sys6 python
easy to create. If you really want one: tell me, maybe I can be convinced.
Alternatively: get the sources, put in the necessary gestalt() and
compatability calls yourself and send me the results.
If you don't have enough memory: the sizes choosen are somewhat arbitrary.
Try lowering them and seeing whether the resulting python is still usable.
Note, however, that python running out of memory may result in your mac
1996-04-10 11:56:32 -03:00
freezing. If this happens I would like to hear of it.
Note that if you're using Tk you might want to raise the memory size, tcl
and tk are quite a memory hog.
1996-08-28 10:51:11 -03:00
A final note to CFM68K (and possibly PPC) users: the Code Fragment Manager
can (incorrectly) produce "library not found" and other strange error messages
when it really means that there is not enough room in the system heap. Decreasing
(yes, *de*creasing) the size of the interpreter and/or enabling virtual memory
may solve these problems.
PowerPC Macintosh instructions
------------------------------
1996-08-28 10:51:11 -03:00
1. Remove older versions of "PythonCorePPC", "PythonCore" and "Python Preferences"
1995-10-09 20:26:05 -03:00
from your system folder.
1995-10-09 20:26:05 -03:00
2. Run the MkPluginAliases applet. This will first ask you whether it should
create an initial preferences file. Let it do so. Next, it will create a
number of aliases in the PlugIns folder. If this fails in mysterious ways
1996-05-20 08:22:41 -03:00
examine the script (in Mac:scripts:MkPluginAliases.py) and create the aliases
by hand (and tell me what you did to make the script fail:-).
1995-10-09 20:26:05 -03:00
3. To make sure any applets you create can find the common interpreter code
1996-08-28 10:51:11 -03:00
you should move PythonCorePPC to the Extensions folder (drop it on the
System Folder and it will find its own way). Alternatively, you can
1996-08-28 10:51:11 -03:00
make an alias called "PythonCorePPC" in the Extensions folder and
point it to the real PythonCorePPC. You may want to start PythonPPC
again at this point to check that you actually put the extension in
the right place.
1995-10-09 20:26:05 -03:00
4. You're all set now. Continue with the common instructions.
1996-08-28 10:51:11 -03:00
CFM68K Macintosh instructions
-----------------------------
For this you need a Mac with a 68020, 68030 or 68040, and at least System 7.1.1.
CFM68K Python will not run on PowerPC Macs.
1996-08-28 10:51:11 -03:00
1. Install the stuff from the "CFM68K for System Folder" into the Extensions
folder and restart.
2. Continue with the PowerPC instructions, but read "CFM68K" every time you see
"PPC".
Classic 68K Macintosh instructions
----------------------------------
1. Remove the old "Python Preferences" file from the Preferences folder, if there is one.
2. Run Python68K. This will create an initial preferences file (after
1995-10-09 20:26:05 -03:00
asking you if that's ok with you). Quit python.
3. Continue with the next section.
Common instructions
-------------------
You should now have a functioning python. It is probably a good idea to run
"testall.py" from :Lib:test at this point, this should not give any errors.
Running testall.py is done by double-clicking it or dropping it onto the
interpreter.
Next, try "compileall.py" from :Lib to create all .pyc files (but this isn't
really important).
1996-08-28 10:51:11 -03:00
PPC and CFM68K users have a couple of applets in the main folder they may want to try,
(68K users can use the corresponding scripts from the "scripts" folder):
- EditPythonPrefs allows you to edit the preferences file, to change the
python home folder or modify the initial sys.path setting.
1996-08-28 10:51:11 -03:00
The default settings are somewhat arbitrary, you can remove tkinter if
you don't use it and possibly add Extensions:img:Lib.
- mkapplet creates a python applet, a tiny application written
in python. Drop a python source on it and out comes the application. More
1996-05-20 08:22:41 -03:00
information can be found in the "Mac:Demo" folder.
1996-08-28 10:51:11 -03:00
PPC and CFM68K users will see one more files in the python folder: PythonApplet. This is
the template for building applets, leave it alone. For the 1.4b3 release the applet is
specific for your installation, i.e. PPC applets will not run on CFM68K machines and vice
versa. I hope to fix this soon.
Things to see
-------------
There are some readme files in the "Read me files" folder that may contain
1996-05-20 08:22:41 -03:00
useful information. There is also a first stab at documentation (plus examples)
in the Mac:Demo folder. The toplevel Demo folder has machine-independent demos.
See the file Readme-mac for mac-specific notes. The Mac:Lib:test folder also
has some programs that show simple capabilities of various modules.
The "scripts" folder has some sample scripts. Some are useful, some are just
interesting to look at to see how various things work. The MkDistr, mkapplet
and fullbuild scripts (plus the ones mentioned above) may help you to understand
how to use AppleEvents and various other toolboxes from python.
The 'img' group of modules, which handles I/O of many different image formats
(not pict yet, sigh:-) is included, but without documentation. You can find
docs at ftp://ftp.cwi.nl/pub/jack/python/img (or somewhere around there).
Feedback
--------
Send bug reports, suggestions, contributions and fanmail to <jack@cwi.nl>.
1996-08-28 10:51:11 -03:00
Be warned however that I'm pretty busy, so I may not always
respond immedeately.
1996-08-28 10:51:11 -03:00
A better way to discuss MacPython is to join the <pythonmac-sig@python.org>
mailing list, which is explicitly meant for this purpose.
Alternatively, you can try sending to comp.lang.python or python-list@cwi.nl,
but since I read the newsgroup, not the mailinglist, I may miss it there
(but other people may know quite a bit more than me anyway:-).
Jack Jansen
Centrum voor Wiskunde en Informatica
Kruislaan 413
1098 SJ Amsterdam
the Netherlands
<jack@cwi.nl>, http://www.cwi.nl/~jack