cpython/Doc/ref/ref2.tex

569 lines
21 KiB
TeX
Raw Normal View History

\chapter{Lexical analysis\label{lexical}}
1998-05-06 16:52:49 -03:00
A Python program is read by a \emph{parser}. Input to the parser is a
stream of \emph{tokens}, generated by the \emph{lexical analyzer}. This
1998-05-06 16:52:49 -03:00
chapter describes how the lexical analyzer breaks a file into tokens.
\index{lexical analysis}
\index{parser}
\index{token}
Python uses the 7-bit \ASCII{} character set for program text and string
literals. 8-bit characters may be used in string literals and comments
but their interpretation is platform dependent; the proper way to
insert 8-bit characters in string literals is by using octal or
hexadecimal escape sequences.
The run-time character set depends on the I/O devices connected to the
program but is generally a superset of \ASCII{}.
\strong{Future compatibility note:} It may be tempting to assume that the
character set for 8-bit characters is ISO Latin-1 (an \ASCII{}
superset that covers most western languages that use the Latin
alphabet), but it is possible that in the future Unicode text editors
will become common. These generally use the UTF-8 encoding, which is
also an \ASCII{} superset, but with very different use for the
characters with ordinals 128-255. While there is no consensus on this
subject yet, it is unwise to assume either Latin-1 or UTF-8, even
though the current implementation appears to favor Latin-1. This
applies both to the source character set and the run-time character
set.
\section{Line structure\label{line-structure}}
1998-05-06 16:52:49 -03:00
A Python program is divided into a number of \emph{logical lines}.
\index{line structure}
\subsection{Logical lines\label{logical}}
The end of
1998-05-06 16:52:49 -03:00
a logical line is represented by the token NEWLINE. Statements cannot
cross logical line boundaries except where NEWLINE is allowed by the
1998-07-24 12:36:43 -03:00
syntax (e.g., between statements in compound statements).
A logical line is constructed from one or more \emph{physical lines}
by following the explicit or implicit \emph{line joining} rules.
1998-05-06 16:52:49 -03:00
\index{logical line}
\index{physical line}
\index{line joining}
1998-05-06 16:52:49 -03:00
\index{NEWLINE token}
\subsection{Physical lines\label{physical}}
A physical line ends in whatever the current platform's convention is
for terminating lines. On \UNIX{}, this is the \ASCII{} LF (linefeed)
character. On DOS/Windows, it is the \ASCII{} sequence CR LF (return
followed by linefeed). On Macintosh, it is the \ASCII{} CR (return)
character.
\subsection{Comments\label{comments}}
1998-05-06 16:52:49 -03:00
A comment starts with a hash character (\code{\#}) that is not part of
1998-05-06 16:52:49 -03:00
a string literal, and ends at the end of the physical line. A comment
signifies the end of the logical line unless the implicit line joining
rules are invoked.
Comments are ignored by the syntax; they are not tokens.
1998-05-06 16:52:49 -03:00
\index{comment}
\index{hash character}
\subsection{Explicit line joining\label{explicit-joining}}
1998-05-06 16:52:49 -03:00
Two or more physical lines may be joined into logical lines using
backslash characters (\code{\e}), as follows: when a physical line ends
1998-05-06 16:52:49 -03:00
in a backslash that is not part of a string literal or comment, it is
joined with the following forming a single logical line, deleting the
backslash and the following end-of-line character. For example:
\index{physical line}
\index{line joining}
\index{line continuation}
\index{backslash character}
%
\begin{verbatim}
if 1900 < year < 2100 and 1 <= month <= 12 \
and 1 <= day <= 31 and 0 <= hour < 24 \
and 0 <= minute < 60 and 0 <= second < 60: # Looks like a valid date
return 1
\end{verbatim}
A line ending in a backslash cannot carry a comment. A backslash does
not continue a comment. A backslash does not continue a token except
for string literals (i.e., tokens other than string literals cannot be
split across physical lines using a backslash). A backslash is
illegal elsewhere on a line outside a string literal.
1998-05-06 16:52:49 -03:00
\subsection{Implicit line joining\label{implicit-joining}}
1998-05-06 16:52:49 -03:00
Expressions in parentheses, square brackets or curly braces can be
split over more than one physical line without using backslashes.
For example:
\begin{verbatim}
month_names = ['Januari', 'Februari', 'Maart', # These are the
'April', 'Mei', 'Juni', # Dutch names
'Juli', 'Augustus', 'September', # for the months
'Oktober', 'November', 'December'] # of the year
\end{verbatim}
Implicitly continued lines can carry comments. The indentation of the
continuation lines is not important. Blank continuation lines are
allowed. There is no NEWLINE token between implicit continuation
lines. Implicitly continued lines can also occur within triple-quoted
strings (see below); in that case they cannot carry comments.
1998-05-06 16:52:49 -03:00
\subsection{Blank lines \index{blank line}\label{blank-lines}}
A logical line that contains only spaces, tabs, formfeeds and possibly
a comment, is ignored (i.e., no NEWLINE token is generated). During
interactive input of statements, handling of a blank line may differ
depending on the implementation of the read-eval-print loop. In the
standard implementation, an entirely blank logical line (i.e.\ one
containing not even whitespace or a comment) terminates a multi-line
statement.
1998-05-06 16:52:49 -03:00
\subsection{Indentation\label{indentation}}
1998-05-06 16:52:49 -03:00
Leading whitespace (spaces and tabs) at the beginning of a logical
line is used to compute the indentation level of the line, which in
turn is used to determine the grouping of statements.
\index{indentation}
\index{whitespace}
\index{leading whitespace}
\index{space}
\index{tab}
\index{grouping}
\index{statement grouping}
First, tabs are replaced (from left to right) by one to eight spaces
such that the total number of characters up to and including the
replacement is a multiple of
eight (this is intended to be the same rule as used by \UNIX{}). The
1998-05-06 16:52:49 -03:00
total number of spaces preceding the first non-blank character then
determines the line's indentation. Indentation cannot be split over
multiple physical lines using backslashes; the whitespace up to the
first backslash determines the indentation.
\strong{Cross-platform compatibility note:} because of the nature of
text editors on non-UNIX platforms, it is unwise to use a mixture of
spaces and tabs for the indentation in a single source file.
A formfeed character may be present at the start of the line; it will
be ignored for the indentation calculations above. Formfeed
characters occurring elsewhere in the leading whitespace have an
undefined effect (for instance, they may reset the space count to
zero).
1998-05-06 16:52:49 -03:00
The indentation levels of consecutive lines are used to generate
INDENT and DEDENT tokens, using a stack, as follows.
\index{INDENT token}
\index{DEDENT token}
Before the first line of the file is read, a single zero is pushed on
the stack; this will never be popped off again. The numbers pushed on
the stack will always be strictly increasing from bottom to top. At
the beginning of each logical line, the line's indentation level is
compared to the top of the stack. If it is equal, nothing happens.
If it is larger, it is pushed on the stack, and one INDENT token is
generated. If it is smaller, it \emph{must} be one of the numbers
1998-05-06 16:52:49 -03:00
occurring on the stack; all numbers on the stack that are larger are
popped off, and for each number popped off a DEDENT token is
generated. At the end of the file, a DEDENT token is generated for
each number remaining on the stack that is larger than zero.
Here is an example of a correctly (though confusingly) indented piece
of Python code:
\begin{verbatim}
def perm(l):
# Compute the list of all permutations of l
if len(l) <= 1:
return [l]
r = []
for i in range(len(l)):
s = l[:i] + l[i+1:]
p = perm(s)
for x in p:
r.append(l[i:i+1] + x)
return r
\end{verbatim}
The following example shows various indentation errors:
\begin{verbatim}
def perm(l): # error: first line indented
1998-05-06 16:52:49 -03:00
for i in range(len(l)): # error: not indented
s = l[:i] + l[i+1:]
p = perm(l[:i] + l[i+1:]) # error: unexpected indent
for x in p:
r.append(l[i:i+1] + x)
return r # error: inconsistent dedent
\end{verbatim}
(Actually, the first three errors are detected by the parser; only the
last error is found by the lexical analyzer --- the indentation of
\code{return r} does not match a level popped off the stack.)
1998-05-06 16:52:49 -03:00
\subsection{Whitespace between tokens\label{whitespace}}
Except at the beginning of a logical line or in string literals, the
whitespace characters space, tab and formfeed can be used
interchangeably to separate tokens. Whitespace is needed between two
tokens only if their concatenation could otherwise be interpreted as a
different token (e.g., ab is one token, but a b is two tokens).
\section{Other tokens\label{other-tokens}}
1998-05-06 16:52:49 -03:00
Besides NEWLINE, INDENT and DEDENT, the following categories of tokens
exist: \emph{identifiers}, \emph{keywords}, \emph{literals},
\emph{operators}, and \emph{delimiters}.
Whitespace characters (other than line terminators, discussed earlier)
are not tokens, but serve to delimit tokens.
Where
1998-05-06 16:52:49 -03:00
ambiguity exists, a token comprises the longest possible string that
forms a legal token, when read from left to right.
\section{Identifiers and keywords\label{identifiers}}
1998-05-06 16:52:49 -03:00
Identifiers (also referred to as \emph{names}) are described by the following
1998-05-06 16:52:49 -03:00
lexical definitions:
\index{identifier}
\index{name}
\begin{verbatim}
identifier: (letter|"_") (letter|digit|"_")*
letter: lowercase | uppercase
lowercase: "a"..."z"
uppercase: "A"..."Z"
digit: "0"..."9"
\end{verbatim}
Identifiers are unlimited in length. Case is significant.
\subsection{Keywords\label{keywords}}
1998-05-06 16:52:49 -03:00
The following identifiers are used as reserved words, or
\emph{keywords} of the language, and cannot be used as ordinary
identifiers. They must be spelled exactly as written here:%
\index{keyword}%
1998-05-06 16:52:49 -03:00
\index{reserved word}
\begin{verbatim}
and del for is raise
assert elif from lambda return
break else global not try
class except if or while
continue exec import pass
def finally in print
1998-05-06 16:52:49 -03:00
\end{verbatim}
% When adding keywords, use reswords.py for reformatting
\subsection{Reserved classes of identifiers\label{id-classes}}
Certain classes of identifiers (besides keywords) have special
meanings. These are:
\begin{tableiii}{l|l|l}{code}{Form}{Meaning}{Notes}
\lineiii{_*}{Not imported by \samp{from \var{module} import *}}{(1)}
\lineiii{__*__}{System-defined name}{}
\lineiii{__*}{Class-private name mangling}{}
\end{tableiii}
(XXX need section references here.)
1998-05-06 16:52:49 -03:00
Note:
\begin{description}
\item[(1)] The special identifier \samp{_} is used in the interactive
interpreter to store the result of the last evaluation; it is stored
in the \module{__builtin__} module. When not in interactive mode,
\samp{_} has no special meaning and is not defined.
\end{description}
\section{Literals\label{literals}}
1998-05-06 16:52:49 -03:00
Literals are notations for constant values of some built-in types.
\index{literal}
\index{constant}
\subsection{String literals\label{strings}}
1998-05-06 16:52:49 -03:00
String literals are described by the following lexical definitions:
\index{string literal}
\begin{verbatim}
stringliteral: shortstring | longstring
shortstring: "'" shortstringitem* "'" | '"' shortstringitem* '"'
longstring: "'''" longstringitem* "'''" | '"""' longstringitem* '"""'
shortstringitem: shortstringchar | escapeseq
longstringitem: longstringchar | escapeseq
shortstringchar: <any ASCII character except "\" or newline or the quote>
longstringchar: <any ASCII character except "\">
escapeseq: "\" <any ASCII character>
\end{verbatim}
\index{ASCII@\ASCII{}}
1998-05-06 16:52:49 -03:00
\index{triple-quoted string}
\index{Unicode Consortium}
\index{string!Unicode}
In plain English: String literals can be enclosed in matching single
quotes (\code{'}) or double quotes (\code{"}). They can also be
enclosed in matching groups of three single or double quotes (these
are generally referred to as \emph{triple-quoted strings}). The
backslash (\code{\e}) character is used to escape characters that
otherwise have a special meaning, such as newline, backslash itself,
or the quote character. String literals may optionally be prefixed
with a letter `r' or `R'; such strings are called
\dfn{raw strings}\index{raw string} and use different rules for
backslash escape sequences. A prefix of 'u' or 'U' makes the string
a Unicode string. Unicode strings use the Unicode character set as
defined by the Unicode Consortium and ISO~10646. Some additional
escape sequences, described below, are available in Unicode strings.
In triple-quoted strings,
1998-05-06 16:52:49 -03:00
unescaped newlines and quotes are allowed (and are retained), except
that three unescaped quotes in a row terminate the string. (A
``quote'' is the character used to open the string, i.e. either
\code{'} or \code{"}.)
1998-05-06 16:52:49 -03:00
Unless an `r' or `R' prefix is present, escape sequences in strings
are interpreted according to rules similar
to those used by Standard \C{}. The recognized escape sequences are:
1998-05-06 16:52:49 -03:00
\index{physical line}
\index{escape sequence}
\index{Standard C}
\index{C}
\begin{tableii}{l|l}{code}{Escape Sequence}{Meaning}
\lineii{\e\var{newline}} {Ignored}
\lineii{\e\e} {Backslash (\code{\e})}
\lineii{\e'} {Single quote (\code{'})}
\lineii{\e"} {Double quote (\code{"})}
\lineii{\e a} {\ASCII{} Bell (BEL)}
\lineii{\e b} {\ASCII{} Backspace (BS)}
\lineii{\e f} {\ASCII{} Formfeed (FF)}
\lineii{\e n} {\ASCII{} Linefeed (LF)}
\lineii{\e N\{\var{name}\}}
{Character named \var{name} in the Unicode database (Unicode only)}
\lineii{\e r} {\ASCII{} Carriage Return (CR)}
\lineii{\e t} {\ASCII{} Horizontal Tab (TAB)}
\lineii{\e u\var{xxxx}}
{Character with 16-bit hex value \var{xxxx} (Unicode only)}
\lineii{\e U\var{xxxxxxxx}}
{Character with 32-bit hex value \var{xxxxxxxx} (Unicode only)}
\lineii{\e v} {\ASCII{} Vertical Tab (VT)}
\lineii{\e\var{ooo}} {\ASCII{} character with octal value \var{ooo}}
\lineii{\e x\var{hh}} {\ASCII{} character with hex value \var{hh}}
\end{tableii}
\index{ASCII@\ASCII{}}
1998-05-06 16:52:49 -03:00
In strict compatibility with Standard C, up to three octal digits are
1998-05-06 16:52:49 -03:00
accepted, but an unlimited number of hex digits is taken to be part of
the hex escape (and then the lower 8 bits of the resulting hex number
are used in 8-bit implementations).
1998-05-06 16:52:49 -03:00
Unlike Standard \index{unrecognized escape sequence}C,
all unrecognized escape sequences are left in the string unchanged,
i.e., \emph{the backslash is left in the string}. (This behavior is
1998-05-06 16:52:49 -03:00
useful when debugging: if an escape sequence is mistyped, the
resulting output is more easily recognized as broken.) It is also
important to note that the escape sequences marked as ``(Unicode
only)'' in the table above fall into the category of unrecognized
escapes for non-Unicode string literals.
1998-05-06 16:52:49 -03:00
When an `r' or `R' prefix is present, backslashes are still used to
quote the following character, but \emph{all backslashes are left in
the string}. For example, the string literal \code{r"\e n"} consists
of two characters: a backslash and a lowercase `n'. String quotes can
be escaped with a backslash, but the backslash remains in the string;
for example, \code{r"\e""} is a valid string literal consisting of two
characters: a backslash and a double quote; \code{r"\e"} is not a value
string literal (even a raw string cannot end in an odd number of
backslashes). Specifically, \emph{a raw string cannot end in a single
backslash} (since the backslash would escape the following quote
character). Note also that a single backslash followed by a newline
is interpreted as those two characters as part of the string,
\emph{not} as a line continuation.
\subsection{String literal concatenation\label{string-catenation}}
Multiple adjacent string literals (delimited by whitespace), possibly
using different quoting conventions, are allowed, and their meaning is
the same as their concatenation. Thus, \code{"hello" 'world'} is
equivalent to \code{"helloworld"}. This feature can be used to reduce
the number of backslashes needed, to split long strings conveniently
across long lines, or even to add comments to parts of strings, for
example:
\begin{verbatim}
re.compile("[A-Za-z_]" # letter or underscore
"[A-Za-z0-9_]*" # letter, digit or underscore
)
\end{verbatim}
Note that this feature is defined at the syntactical level, but
implemented at compile time. The `+' operator must be used to
concatenate string expressions at run time. Also note that literal
concatenation can use different quoting styles for each component
(even mixing raw strings and triple quoted strings).
\subsection{Unicode literals \label{unicode}}
XXX explain more here...
\subsection{Numeric literals\label{numbers}}
1998-05-06 16:52:49 -03:00
There are four types of numeric literals: plain integers, long
integers, floating point numbers, and imaginary numbers. There are no
complex literals (complex numbers can be formed by adding a real
number and an imaginary number).
1998-05-06 16:52:49 -03:00
\index{number}
\index{numeric literal}
\index{integer literal}
\index{plain integer literal}
\index{long integer literal}
\index{floating point literal}
\index{hexadecimal literal}
\index{octal literal}
\index{decimal literal}
\index{imaginary literal}
\index{complex literal}
Note that numeric literals do not include a sign; a phrase like
\code{-1} is actually an expression composed of the unary operator
`\code{-}' and the literal \code{1}.
\subsection{Integer and long integer literals\label{integers}}
1998-05-06 16:52:49 -03:00
Integer and long integer literals are described by the following
lexical definitions:
\begin{verbatim}
longinteger: integer ("l"|"L")
integer: decimalinteger | octinteger | hexinteger
decimalinteger: nonzerodigit digit* | "0"
octinteger: "0" octdigit+
hexinteger: "0" ("x"|"X") hexdigit+
nonzerodigit: "1"..."9"
octdigit: "0"..."7"
hexdigit: digit|"a"..."f"|"A"..."F"
\end{verbatim}
Although both lower case `l' and upper case `L' are allowed as suffix
for long integers, it is strongly recommended to always use `L', since
the letter `l' looks too much like the digit `1'.
Plain integer decimal literals must be at most 2147483647 (i.e., the
largest positive integer, using 32-bit arithmetic). Plain octal and
hexadecimal literals may be as large as 4294967295, but values larger
than 2147483647 are converted to a negative value by subtracting
4294967296. There is no limit for long integer literals apart from
what can be stored in available memory.
Some examples of plain and long integer literals:
\begin{verbatim}
7 2147483647 0177 0x80000000
3L 79228162514264337593543950336L 0377L 0x100000000L
\end{verbatim}
\subsection{Floating point literals\label{floating}}
1998-05-06 16:52:49 -03:00
Floating point literals are described by the following lexical
definitions:
\begin{verbatim}
floatnumber: pointfloat | exponentfloat
pointfloat: [intpart] fraction | intpart "."
1998-07-24 12:36:43 -03:00
exponentfloat: (nonzerodigit digit* | pointfloat) exponent
intpart: nonzerodigit digit* | "0"
1998-05-06 16:52:49 -03:00
fraction: "." digit+
exponent: ("e"|"E") ["+"|"-"] digit+
\end{verbatim}
Note that the integer part of a floating point number cannot look like
an octal integer, though the exponent may look like an octal literal
but will always be interpreted using radix 10. For example,
\samp{1e010} is legal, while \samp{07.1} is a syntax error.
1998-05-06 16:52:49 -03:00
The allowed range of floating point literals is
implementation-dependent.
Some examples of floating point literals:
\begin{verbatim}
3.14 10. .001 1e100 3.14e-10
\end{verbatim}
Note that numeric literals do not include a sign; a phrase like
\code{-1} is actually an expression composed of the operator
\code{-} and the literal \code{1}.
1998-05-06 16:52:49 -03:00
\subsection{Imaginary literals\label{imaginary}}
Imaginary literals are described by the following lexical definitions:
\begin{verbatim}
imagnumber: (floatnumber | intpart) ("j"|"J")
\end{verbatim}
An imaginary literal yields a complex number with a real part of
0.0. Complex numbers are represented as a pair of floating point
numbers and have the same restrictions on their range. To create a
complex number with a nonzero real part, add a floating point number
1998-07-24 12:36:43 -03:00
to it, e.g., \code{(3+4j)}. Some examples of imaginary literals:
\begin{verbatim}
1998-07-24 12:36:43 -03:00
3.14j 10.j 10j .001j 1e100j 3.14e-10j
\end{verbatim}
\section{Operators\label{operators}}
1998-05-06 16:52:49 -03:00
The following tokens are operators:
\index{operators}
\begin{verbatim}
+ - * ** / %
1998-05-06 16:52:49 -03:00
<< >> & | ^ ~
< > <= >= == != <>
1998-05-06 16:52:49 -03:00
\end{verbatim}
The comparison operators \code{<>} and \code{!=} are alternate
spellings of the same operator. \code{!=} is the preferred spelling;
\code{<>} is obsolescent.
1998-05-06 16:52:49 -03:00
\section{Delimiters\label{delimiters}}
1998-05-06 16:52:49 -03:00
The following tokens serve as delimiters in the grammar:
1998-05-06 16:52:49 -03:00
\index{delimiters}
\begin{verbatim}
( ) [ ] { }
, : . ` = ;
+= -= *= /= %= **=
&= |= ^= >>= <<=
\end{verbatim}
The period can also occur in floating-point and imaginary literals. A
sequence of three periods has a special meaning as an ellipsis in slices.
The second half of the list, the augmented assignment operators, serve
lexically as delimiters, but also perform an operation.
The following printing ASCII characters have special meaning as part
of other tokens or are otherwise significant to the lexical analyzer:
\begin{verbatim}
' " # \
1998-05-06 16:52:49 -03:00
\end{verbatim}
The following printing \ASCII{} characters are not used in Python. Their
occurrence outside string literals and comments is an unconditional
error:
\index{ASCII@\ASCII{}}
1998-05-06 16:52:49 -03:00
\begin{verbatim}
@ $ ?
\end{verbatim}