cpython/Doc/lib/librfc822.tex

141 lines
5.6 KiB
TeX
Raw Normal View History

\section{Standard Module \sectcode{rfc822}}
1995-02-27 13:53:25 -04:00
\stmodindex{rfc822}
\renewcommand{\indexsubitem}{(in module rfc822)}
1995-02-27 13:53:25 -04:00
This module defines a class, \code{Message}, which represents a
collection of ``email headers'' as defined by the Internet standard
RFC 822. It is used in various contexts, usually to read such headers
from a file.
A \code{Message} instance is instantiated with an open file object as
parameter. Instantiation reads headers from the file up to a blank
line and stores them in the instance; after instantiation, the file is
positioned directly after the blank line that terminates the headers.
Input lines as read from the file may either be terminated by CR-LF or
by a single linefeed; a terminating CR-LF is replaced by a single
linefeed before the line is stored.
All header matching is done independent of upper or lower case;
e.g. \code{m['From']}, \code{m['from']} and \code{m['FROM']} all yield
the same result.
\begin{funcdesc}{parsedate}{date}
Attempts to parse a date according to the rules in RFC822. however,
some mailers don't follow that format as specified, so
\code{parsedate()} tries to guess correctly in such cases.
\var{date} is a string containing an RFC822 date, such as
\code{"Mon, 20 Nov 1995 19:12:08 -0500"}. If it succeeds in parsing
the date, \code{parsedate()} returns a 9-tuple that can be passed
directly to \code{time.mktime()}; otherwise \code{None} will be
returned.
\end{funcdesc}
\begin{funcdesc}{parsedate_tz}{date}
Performs the same function as \code{parsedate}, but returns either
\code{None} or a 10-tuple; the first 9 elements make up a tuple that
can be passed directly to \code{time.mktime()}, and the tenth is the
offset of the date's time zone from UTC (which is the official term
for Greenwich Mean Time).
\end{funcdesc}
\subsection{Message Objects}
1995-02-27 13:53:25 -04:00
A \code{Message} instance has the following methods:
\begin{funcdesc}{rewindbody}{}
Seek to the start of the message body. This only works if the file
object is seekable.
\end{funcdesc}
\begin{funcdesc}{getallmatchingheaders}{name}
1995-03-07 06:14:09 -04:00
Return a list of lines consisting of all headers matching
1995-02-27 13:53:25 -04:00
\var{name}, if any. Each physical line, whether it is a continuation
line or not, is a separate list item. Return the empty list if no
header matches \var{name}.
\end{funcdesc}
\begin{funcdesc}{getfirstmatchingheader}{name}
Return a list of lines comprising the first header matching
\var{name}, and its continuation line(s), if any. Return \code{None}
if there is no header matching \var{name}.
\end{funcdesc}
\begin{funcdesc}{getrawheader}{name}
Return a single string consisting of the text after the colon in the
first header matching \var{name}. This includes leading whitespace,
the trailing linefeed, and internal linefeeds and whitespace if there
any continuation line(s) were present. Return \code{None} if there is
no header matching \var{name}.
\end{funcdesc}
\begin{funcdesc}{getheader}{name}
Like \code{getrawheader(\var{name})}, but strip leading and trailing
whitespace (but not internal whitespace).
\end{funcdesc}
\begin{funcdesc}{getaddr}{name}
Return a pair (full name, email address) parsed from the string
returned by \code{getheader(\var{name})}. If no header matching
\var{name} exists, return \code{None, None}; otherwise both the full
name and the address are (possibly empty )strings.
Example: If \code{m}'s first \code{From} header contains the string\\
\code{'jack@cwi.nl (Jack Jansen)'}, then
1995-02-27 13:53:25 -04:00
\code{m.getaddr('From')} will yield the pair
\code{('Jack Jansen', 'jack@cwi.nl')}.
1995-02-27 13:53:25 -04:00
If the header contained
\code{'Jack Jansen <jack@cwi.nl>'} instead, it would yield the
1995-02-27 13:53:25 -04:00
exact same result.
\end{funcdesc}
\begin{funcdesc}{getaddrlist}{name}
This is similar to \code{getaddr(\var{list})}, but parses a header
containing a list of email addresses (e.g. a \code{To} header) and
returns a list of (full name, email address) pairs (even if there was
only one address in the header). If there is no header matching
\var{name}, return an empty list.
XXX The current version of this function is not really correct. It
yields bogus results if a full name contains a comma.
\end{funcdesc}
\begin{funcdesc}{getdate}{name}
Retrieve a header using \code{getheader} and parse it into a 9-tuple
1995-03-07 06:14:09 -04:00
compatible with \code{time.mktime()}. If there is no header matching
1995-02-27 13:53:25 -04:00
\var{name}, or it is unparsable, return \code{None}.
Date parsing appears to be a black art, and not all mailers adhere to
the standard. While it has been tested and found correct on a large
collection of email from many sources, it is still possible that this
function may occasionally yield an incorrect result.
\end{funcdesc}
\begin{funcdesc}{getdate_tz}{name}
Retrieve a header using \code{getheader} and parse it into a 10-tuple;
the first 9 elements will make a tuple compatible with
\code{time.mktime()}, and the 10th is a number giving the offset of
the date's time zone from UTC. Similarly to \code{getdate()}, if
there is no header matching \var{name}, or it is unparsable, return
\code{None}.
\end{funcdesc}
1995-02-27 13:53:25 -04:00
\code{Message} instances also support a read-only mapping interface.
In particular: \code{m[name]} is the same as \code{m.getheader(name)};
and \code{len(m)}, \code{m.has_key(name)}, \code{m.keys()},
\code{m.values()} and \code{m.items()} act as expected (and
consistently).
Finally, \code{Message} instances have two public instance variables:
\begin{datadesc}{headers}
A list containing the entire set of header lines, in the order in
which they were read. Each line contains a trailing newline. The
blank line terminating the headers is not contained in the list.
\end{datadesc}
\begin{datadesc}{fp}
The file object passed at instantiation time.
\end{datadesc}