cpython/Doc/distutils/builtdist.rst

447 lines
21 KiB
ReStructuredText
Raw Normal View History

2007-08-15 11:28:22 -03:00
.. _built-dist:
****************************
Creating Built Distributions
****************************
A "built distribution" is what you're probably used to thinking of either as a
"binary package" or an "installer" (depending on your background). It's not
necessarily binary, though, because it might contain only Python source code
and/or byte-code; and we don't call it a package, because that word is already
spoken for in Python. (And "installer" is a term specific to the world of
mainstream desktop systems.)
A built distribution is how you make life as easy as possible for installers of
your module distribution: for users of RPM-based Linux systems, it's a binary
RPM; for Windows users, it's an executable installer; for Debian-based Linux
users, it's a Debian package; and so forth. Obviously, no one person will be
able to create built distributions for every platform under the sun, so the
Distutils are designed to enable module developers to concentrate on their
specialty---writing code and creating source distributions---while an
intermediary species called *packagers* springs up to turn source distributions
into built distributions for as many platforms as there are packagers.
Of course, the module developer could be his own packager; or the packager could
be a volunteer "out there" somewhere who has access to a platform which the
original developer does not; or it could be software periodically grabbing new
source distributions and turning them into built distributions for as many
platforms as the software has access to. Regardless of who they are, a packager
uses the setup script and the :command:`bdist` command family to generate built
distributions.
As a simple example, if I run the following command in the Distutils source
tree::
python setup.py bdist
then the Distutils builds my module distribution (the Distutils itself in this
case), does a "fake" installation (also in the :file:`build` directory), and
creates the default type of built distribution for my platform. The default
format for built distributions is a "dumb" tar file on Unix, and a simple
executable installer on Windows. (That tar file is considered "dumb" because it
has to be unpacked in a specific location to work.)
Thus, the above command on a Unix system creates
:file:`Distutils-1.0.{plat}.tar.gz`; unpacking this tarball from the right place
installs the Distutils just as though you had downloaded the source distribution
and run ``python setup.py install``. (The "right place" is either the root of
the filesystem or Python's :file:`{prefix}` directory, depending on the options
given to the :command:`bdist_dumb` command; the default is to make dumb
distributions relative to :file:`{prefix}`.)
Obviously, for pure Python distributions, this isn't any simpler than just
running ``python setup.py install``\ ---but for non-pure distributions, which
include extensions that would need to be compiled, it can mean the difference
between someone being able to use your extensions or not. And creating "smart"
built distributions, such as an RPM package or an executable installer for
Windows, is far more convenient for users even if your distribution doesn't
include any extensions.
The :command:`bdist` command has a :option:`--formats` option, similar to the
:command:`sdist` command, which you can use to select the types of built
distribution to generate: for example, ::
python setup.py bdist --format=zip
would, when run on a Unix system, create :file:`Distutils-1.0.{plat}.zip`\
---again, this archive would be unpacked from the root directory to install the
Distutils.
The available formats for built distributions are:
+-------------+------------------------------+---------+
| Format | Description | Notes |
+=============+==============================+=========+
| ``gztar`` | gzipped tar file | (1),(3) |
| | (:file:`.tar.gz`) | |
+-------------+------------------------------+---------+
| ``ztar`` | compressed tar file | \(3) |
| | (:file:`.tar.Z`) | |
+-------------+------------------------------+---------+
| ``tar`` | tar file (:file:`.tar`) | \(3) |
+-------------+------------------------------+---------+
| ``zip`` | zip file (:file:`.zip`) | \(4) |
+-------------+------------------------------+---------+
| ``rpm`` | RPM | \(5) |
+-------------+------------------------------+---------+
| ``pkgtool`` | Solaris :program:`pkgtool` | |
+-------------+------------------------------+---------+
| ``sdux`` | HP-UX :program:`swinstall` | |
+-------------+------------------------------+---------+
| ``rpm`` | RPM | \(5) |
+-------------+------------------------------+---------+
| ``wininst`` | self-extracting ZIP file for | (2),(4) |
| | Windows | |
+-------------+------------------------------+---------+
Notes:
(1)
default on Unix
(2)
default on Windows
**\*\*** to-do! **\*\***
(3)
requires external utilities: :program:`tar` and possibly one of :program:`gzip`,
:program:`bzip2`, or :program:`compress`
(4)
requires either external :program:`zip` utility or :mod:`zipfile` module (part
of the standard Python library since Python 1.6)
(5)
requires external :program:`rpm` utility, version 3.0.4 or better (use ``rpm
--version`` to find out which version you have)
You don't have to use the :command:`bdist` command with the :option:`--formats`
option; you can also use the command that directly implements the format you're
interested in. Some of these :command:`bdist` "sub-commands" actually generate
several similar formats; for instance, the :command:`bdist_dumb` command
generates all the "dumb" archive formats (``tar``, ``ztar``, ``gztar``, and
``zip``), and :command:`bdist_rpm` generates both binary and source RPMs. The
:command:`bdist` sub-commands, and the formats generated by each, are:
+--------------------------+-----------------------+
| Command | Formats |
+==========================+=======================+
| :command:`bdist_dumb` | tar, ztar, gztar, zip |
+--------------------------+-----------------------+
| :command:`bdist_rpm` | rpm, srpm |
+--------------------------+-----------------------+
| :command:`bdist_wininst` | wininst |
+--------------------------+-----------------------+
The following sections give details on the individual :command:`bdist_\*`
commands.
.. _creating-dumb:
Creating dumb built distributions
=================================
**\*\*** Need to document absolute vs. prefix-relative packages here, but first
I have to implement it! **\*\***
.. _creating-rpms:
Creating RPM packages
=====================
The RPM format is used by many popular Linux distributions, including Red Hat,
SuSE, and Mandrake. If one of these (or any of the other RPM-based Linux
distributions) is your usual environment, creating RPM packages for other users
of that same distribution is trivial. Depending on the complexity of your module
distribution and differences between Linux distributions, you may also be able
to create RPMs that work on different RPM-based distributions.
The usual way to create an RPM of your module distribution is to run the
:command:`bdist_rpm` command::
python setup.py bdist_rpm
or the :command:`bdist` command with the :option:`--format` option::
python setup.py bdist --formats=rpm
The former allows you to specify RPM-specific options; the latter allows you to
easily specify multiple formats in one run. If you need to do both, you can
explicitly specify multiple :command:`bdist_\*` commands and their options::
python setup.py bdist_rpm --packager="John Doe <jdoe@example.org>" \
bdist_wininst --target_version="2.0"
Creating RPM packages is driven by a :file:`.spec` file, much as using the
Distutils is driven by the setup script. To make your life easier, the
:command:`bdist_rpm` command normally creates a :file:`.spec` file based on the
information you supply in the setup script, on the command line, and in any
Distutils configuration files. Various options and sections in the
:file:`.spec` file are derived from options in the setup script as follows:
+------------------------------------------+----------------------------------------------+
| RPM :file:`.spec` file option or section | Distutils setup script option |
+==========================================+==============================================+
| Name | :option:`name` |
+------------------------------------------+----------------------------------------------+
| Summary (in preamble) | :option:`description` |
+------------------------------------------+----------------------------------------------+
| Version | :option:`version` |
+------------------------------------------+----------------------------------------------+
| Vendor | :option:`author` and :option:`author_email`, |
| | or --- & :option:`maintainer` and |
| | :option:`maintainer_email` |
+------------------------------------------+----------------------------------------------+
Merged revisions 60481,60485,60489-60492,60494-60496,60498-60499,60501-60503,60505-60506,60508-60509,60523-60524,60532,60543,60545,60547-60548,60552,60554,60556-60559,60561-60562,60569,60571-60572,60574,60576-60583,60585-60586,60589,60591,60594-60595,60597-60598,60600-60601,60606-60612,60615,60617,60619-60621,60623-60625,60627-60629,60631,60633,60635,60647,60650,60652,60654,60656,60658-60659,60664-60666,60668-60670,60672,60676,60678,60680-60683,60685-60686,60688,60690,60692-60694,60697-60700,60705-60706,60708,60711,60714,60720,60724-60730,60732,60736,60742,60744,60746,60748,60750-60751,60753,60756-60757,60759-60761,60763-60764,60766,60769-60770,60774-60784,60787-60789,60793,60796,60799-60809,60812-60813,60815-60821,60823-60826,60828-60829,60831-60834,60836,60838-60839,60846-60849,60852-60854,60856-60859,60861-60870,60874-60875,60880-60881,60886,60888-60890,60892,60894-60898,60900-60931,60933-60958 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r60901 | eric.smith | 2008-02-19 14:21:56 +0100 (Tue, 19 Feb 2008) | 1 line Added PEP 3101. ........ r60907 | georg.brandl | 2008-02-20 20:12:36 +0100 (Wed, 20 Feb 2008) | 2 lines Fixes contributed by Ori Avtalion. ........ r60909 | eric.smith | 2008-02-21 00:34:22 +0100 (Thu, 21 Feb 2008) | 1 line Trim leading zeros from a floating point exponent, per C99. See issue 1600. As far as I know, this only affects Windows. Add float type 'n' to PyOS_ascii_formatd (see PEP 3101 for 'n' description). ........ r60910 | eric.smith | 2008-02-21 00:39:28 +0100 (Thu, 21 Feb 2008) | 1 line Now that PyOS_ascii_formatd supports the 'n' format, simplify the float formatting code to just call it. ........ r60918 | andrew.kuchling | 2008-02-21 15:23:38 +0100 (Thu, 21 Feb 2008) | 2 lines Close manifest file. This change doesn't make any difference to CPython, but is a necessary fix for Jython. ........ r60921 | guido.van.rossum | 2008-02-21 18:46:16 +0100 (Thu, 21 Feb 2008) | 2 lines Remove news about float repr() -- issue 1580 is still in limbo. ........ r60923 | guido.van.rossum | 2008-02-21 19:18:37 +0100 (Thu, 21 Feb 2008) | 5 lines Removed uses of dict.has_key() from distutils, and uses of callable() from copy_reg.py, so the interpreter now starts up without warnings when '-3' is given. More work like this needs to be done in the rest of the stdlib. ........ r60924 | thomas.heller | 2008-02-21 19:28:48 +0100 (Thu, 21 Feb 2008) | 4 lines configure.ac: Remove the configure check for _Bool, it is already done in the top-level Python configure script. configure, fficonfig.h.in: regenerated. ........ r60925 | thomas.heller | 2008-02-21 19:52:20 +0100 (Thu, 21 Feb 2008) | 3 lines Replace 'has_key()' with 'in'. Replace 'raise Error, stuff' with 'raise Error(stuff)'. ........ r60927 | raymond.hettinger | 2008-02-21 20:24:53 +0100 (Thu, 21 Feb 2008) | 1 line Update more instances of has_key(). ........ r60928 | guido.van.rossum | 2008-02-21 20:46:35 +0100 (Thu, 21 Feb 2008) | 3 lines Fix a few typos and layout glitches (more work is needed). Move 2.5 news to Misc/HISTORY. ........ r60936 | georg.brandl | 2008-02-21 21:33:38 +0100 (Thu, 21 Feb 2008) | 2 lines #2079: typo in userdict docs. ........ r60938 | georg.brandl | 2008-02-21 21:38:13 +0100 (Thu, 21 Feb 2008) | 2 lines Part of #2154: minimal syntax fixes in doc example snippets. ........ r60942 | raymond.hettinger | 2008-02-22 04:16:42 +0100 (Fri, 22 Feb 2008) | 1 line First draft for itertools.product(). Docs and other updates forthcoming. ........ r60955 | nick.coghlan | 2008-02-22 11:54:06 +0100 (Fri, 22 Feb 2008) | 1 line Try to make command line error messages from runpy easier to understand (and suppress traceback cruft from the implicitly invoked runpy machinery) ........ r60956 | georg.brandl | 2008-02-22 13:31:45 +0100 (Fri, 22 Feb 2008) | 2 lines A lot more typo fixes by Ori Avtalion. ........ r60957 | georg.brandl | 2008-02-22 13:56:34 +0100 (Fri, 22 Feb 2008) | 2 lines Don't reference pyshell. ........ r60958 | georg.brandl | 2008-02-22 13:57:05 +0100 (Fri, 22 Feb 2008) | 2 lines Another fix. ........
2008-02-22 12:37:40 -04:00
| Copyright | :option:`license` |
2007-08-15 11:28:22 -03:00
+------------------------------------------+----------------------------------------------+
| Url | :option:`url` |
+------------------------------------------+----------------------------------------------+
| %description (section) | :option:`long_description` |
+------------------------------------------+----------------------------------------------+
Additionally, there are many options in :file:`.spec` files that don't have
corresponding options in the setup script. Most of these are handled through
options to the :command:`bdist_rpm` command as follows:
+-------------------------------+-----------------------------+-------------------------+
| RPM :file:`.spec` file option | :command:`bdist_rpm` option | default value |
| or section | | |
+===============================+=============================+=========================+
| Release | :option:`release` | "1" |
+-------------------------------+-----------------------------+-------------------------+
| Group | :option:`group` | "Development/Libraries" |
+-------------------------------+-----------------------------+-------------------------+
| Vendor | :option:`vendor` | (see above) |
+-------------------------------+-----------------------------+-------------------------+
| Packager | :option:`packager` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| Provides | :option:`provides` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| Requires | :option:`requires` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| Conflicts | :option:`conflicts` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| Obsoletes | :option:`obsoletes` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| Distribution | :option:`distribution_name` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| BuildRequires | :option:`build_requires` | (none) |
+-------------------------------+-----------------------------+-------------------------+
| Icon | :option:`icon` | (none) |
+-------------------------------+-----------------------------+-------------------------+
Obviously, supplying even a few of these options on the command-line would be
tedious and error-prone, so it's usually best to put them in the setup
configuration file, :file:`setup.cfg`\ ---see section :ref:`setup-config`. If
you distribute or package many Python module distributions, you might want to
put options that apply to all of them in your personal Distutils configuration
file (:file:`~/.pydistutils.cfg`).
There are three steps to building a binary RPM package, all of which are
handled automatically by the Distutils:
#. create a :file:`.spec` file, which describes the package (analogous to the
Distutils setup script; in fact, much of the information in the setup script
winds up in the :file:`.spec` file)
#. create the source RPM
#. create the "binary" RPM (which may or may not contain binary code, depending
on whether your module distribution contains Python extensions)
Normally, RPM bundles the last two steps together; when you use the Distutils,
all three steps are typically bundled together.
If you wish, you can separate these three steps. You can use the
:option:`--spec-only` option to make :command:`bdist_rpm` just create the
:file:`.spec` file and exit; in this case, the :file:`.spec` file will be
written to the "distribution directory"---normally :file:`dist/`, but
customizable with the :option:`--dist-dir` option. (Normally, the :file:`.spec`
file winds up deep in the "build tree," in a temporary directory created by
:command:`bdist_rpm`.)
.. % \XXX{this isn't implemented yet---is it needed?!}
.. % You can also specify a custom \file{.spec} file with the
.. % \longprogramopt{spec-file} option; used in conjunction with
.. % \longprogramopt{spec-only}, this gives you an opportunity to customize
.. % the \file{.spec} file manually:
2009-01-03 17:18:54 -04:00
.. %
2007-08-15 11:28:22 -03:00
.. % \ begin{verbatim}
.. % > python setup.py bdist_rpm --spec-only
.. % # ...edit dist/FooBar-1.0.spec
.. % > python setup.py bdist_rpm --spec-file=dist/FooBar-1.0.spec
.. % \ end{verbatim}
2009-01-03 17:18:54 -04:00
.. %
2007-08-15 11:28:22 -03:00
.. % (Although a better way to do this is probably to override the standard
.. % \command{bdist\_rpm} command with one that writes whatever else you want
.. % to the \file{.spec} file.)
.. _creating-wininst:
Creating Windows Installers
===========================
Executable installers are the natural format for binary distributions on
Windows. They display a nice graphical user interface, display some information
about the module distribution to be installed taken from the metadata in the
setup script, let the user select a few options, and start or cancel the
installation.
Since the metadata is taken from the setup script, creating Windows installers
is usually as easy as running::
python setup.py bdist_wininst
or the :command:`bdist` command with the :option:`--formats` option::
python setup.py bdist --formats=wininst
If you have a pure module distribution (only containing pure Python modules and
packages), the resulting installer will be version independent and have a name
like :file:`foo-1.0.win32.exe`. These installers can even be created on Unix
platforms or Mac OS X.
2007-08-15 11:28:22 -03:00
If you have a non-pure distribution, the extensions can only be created on a
Windows platform, and will be Python version dependent. The installer filename
will reflect this and now has the form :file:`foo-1.0.win32-py2.0.exe`. You
have to create a separate installer for every Python version you want to
support.
#1370: Finish the merge r58749, log below, by resolving all conflicts in Doc/. Merged revisions 58221-58741 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r58221 | georg.brandl | 2007-09-20 10:57:59 -0700 (Thu, 20 Sep 2007) | 2 lines Patch #1181: add os.environ.clear() method. ........ r58225 | sean.reifschneider | 2007-09-20 23:33:28 -0700 (Thu, 20 Sep 2007) | 3 lines Issue1704287: "make install" fails unless you do "make" first. Make oldsharedmods and sharedmods in "libinstall". ........ r58232 | guido.van.rossum | 2007-09-22 13:18:03 -0700 (Sat, 22 Sep 2007) | 4 lines Patch # 188 by Philip Jenvey. Make tell() mark CRLF as a newline. With unit test. ........ r58242 | georg.brandl | 2007-09-24 10:55:47 -0700 (Mon, 24 Sep 2007) | 2 lines Fix typo and double word. ........ r58245 | georg.brandl | 2007-09-24 10:59:28 -0700 (Mon, 24 Sep 2007) | 2 lines #1196: document default radix for int(). ........ r58247 | georg.brandl | 2007-09-24 11:08:24 -0700 (Mon, 24 Sep 2007) | 2 lines #1177: accept 2xx responses for https too, not only http. ........ r58249 | andrew.kuchling | 2007-09-24 16:45:51 -0700 (Mon, 24 Sep 2007) | 1 line Remove stray odd character; grammar fix ........ r58250 | andrew.kuchling | 2007-09-24 16:46:28 -0700 (Mon, 24 Sep 2007) | 1 line Typo fix ........ r58251 | andrew.kuchling | 2007-09-24 17:09:42 -0700 (Mon, 24 Sep 2007) | 1 line Add various items ........ r58268 | vinay.sajip | 2007-09-26 22:34:45 -0700 (Wed, 26 Sep 2007) | 1 line Change to flush and close logic to fix #1760556. ........ r58269 | vinay.sajip | 2007-09-26 22:38:51 -0700 (Wed, 26 Sep 2007) | 1 line Change to basicConfig() to fix #1021. ........ r58270 | georg.brandl | 2007-09-26 23:26:58 -0700 (Wed, 26 Sep 2007) | 2 lines #1208: document match object's boolean value. ........ r58271 | vinay.sajip | 2007-09-26 23:56:13 -0700 (Wed, 26 Sep 2007) | 1 line Minor date change. ........ r58272 | vinay.sajip | 2007-09-27 00:35:10 -0700 (Thu, 27 Sep 2007) | 1 line Change to LogRecord.__init__() to fix #1206. Note that archaic use of type(x) == types.DictType is because of keeping 1.5.2 compatibility. While this is much less relevant these days, there probably needs to be a separate commit for removing all archaic constructs at the same time. ........ r58288 | brett.cannon | 2007-09-30 12:45:10 -0700 (Sun, 30 Sep 2007) | 9 lines tuple.__repr__ did not consider a reference loop as it is not possible from Python code; but it is possible from C. object.__str__ had the issue of not expecting a type to doing something within it's tp_str implementation that could trigger an infinite recursion, but it could in C code.. Both found thanks to BaseException and how it handles its repr. Closes issue #1686386. Thanks to Thomas Herve for taking an initial stab at coming up with a solution. ........ r58289 | brett.cannon | 2007-09-30 13:37:19 -0700 (Sun, 30 Sep 2007) | 3 lines Fix error introduced by r58288; if a tuple is length 0 return its repr and don't worry about any self-referring tuples. ........ r58294 | facundo.batista | 2007-10-02 10:01:24 -0700 (Tue, 02 Oct 2007) | 11 lines Made the various is_* operations return booleans. This was discussed with Cawlishaw by mail, and he basically confirmed that to these is_* operations, there's no need to return Decimal(0) and Decimal(1) if the language supports the False and True booleans. Also added a few tests for the these functions in extra.decTest, since they are mostly untested (apart from the doctests). Thanks Mark Dickinson ........ r58295 | facundo.batista | 2007-10-02 11:21:18 -0700 (Tue, 02 Oct 2007) | 4 lines Added a class to store the digits of log(10), so that they can be made available when necessary without recomputing. Thanks Mark Dickinson ........ r58299 | mark.summerfield | 2007-10-03 01:53:21 -0700 (Wed, 03 Oct 2007) | 4 lines Added note in footnote about string comparisons about unicodedata.normalize(). ........ r58304 | raymond.hettinger | 2007-10-03 14:18:11 -0700 (Wed, 03 Oct 2007) | 1 line enumerate() is no longer bounded to using sequences shorter than LONG_MAX. The possibility of overflow was sending some newsgroup posters into a tizzy. ........ r58305 | raymond.hettinger | 2007-10-03 17:20:27 -0700 (Wed, 03 Oct 2007) | 1 line itertools.count() no longer limited to sys.maxint. ........ r58306 | kurt.kaiser | 2007-10-03 18:49:54 -0700 (Wed, 03 Oct 2007) | 3 lines Assume that the user knows when he wants to end the line; don't insert something he didn't select or complete. ........ r58307 | kurt.kaiser | 2007-10-03 19:07:50 -0700 (Wed, 03 Oct 2007) | 2 lines Remove unused theme that was causing a fault in p3k. ........ r58308 | kurt.kaiser | 2007-10-03 19:09:17 -0700 (Wed, 03 Oct 2007) | 2 lines Clean up EditorWindow close. ........ r58309 | kurt.kaiser | 2007-10-03 19:53:07 -0700 (Wed, 03 Oct 2007) | 7 lines textView cleanup. Patch 1718043 Tal Einat. M idlelib/EditorWindow.py M idlelib/aboutDialog.py M idlelib/textView.py M idlelib/NEWS.txt ........ r58310 | kurt.kaiser | 2007-10-03 20:11:12 -0700 (Wed, 03 Oct 2007) | 3 lines configDialog cleanup. Patch 1730217 Tal Einat. ........ r58311 | neal.norwitz | 2007-10-03 23:00:48 -0700 (Wed, 03 Oct 2007) | 4 lines Coverity #151: Remove deadcode. All this code already exists above starting at line 653. ........ r58325 | fred.drake | 2007-10-04 19:46:12 -0700 (Thu, 04 Oct 2007) | 1 line wrap lines to <80 characters before fixing errors ........ r58326 | raymond.hettinger | 2007-10-04 19:47:07 -0700 (Thu, 04 Oct 2007) | 6 lines Add __asdict__() to NamedTuple and refine the docs. Add maxlen support to deque() and fixup docs. Partially fix __reduce__(). The None as a third arg was no longer supported. Still needs work on __reduce__() to handle recursive inputs. ........ r58327 | fred.drake | 2007-10-04 19:48:32 -0700 (Thu, 04 Oct 2007) | 3 lines move descriptions of ac_(in|out)_buffer_size to the right place http://bugs.python.org/issue1053 ........ r58329 | neal.norwitz | 2007-10-04 20:39:17 -0700 (Thu, 04 Oct 2007) | 3 lines dict could be NULL, so we need to XDECREF. Fix a compiler warning about passing a PyTypeObject* instead of PyObject*. ........ r58330 | neal.norwitz | 2007-10-04 20:41:19 -0700 (Thu, 04 Oct 2007) | 2 lines Fix Coverity #158: Check the correct variable. ........ r58332 | neal.norwitz | 2007-10-04 22:01:38 -0700 (Thu, 04 Oct 2007) | 7 lines Fix Coverity #159. This code was broken if save() returned a negative number since i contained a boolean value and then we compared i < 0 which should never be true. Will backport (assuming it's necessary) ........ r58334 | neal.norwitz | 2007-10-04 22:29:17 -0700 (Thu, 04 Oct 2007) | 1 line Add a note about fixing some more warnings found by Coverity. ........ r58338 | raymond.hettinger | 2007-10-05 12:07:31 -0700 (Fri, 05 Oct 2007) | 1 line Restore BEGIN/END THREADS macros which were squashed in the previous checkin ........ r58343 | gregory.p.smith | 2007-10-06 00:48:10 -0700 (Sat, 06 Oct 2007) | 3 lines Stab in the dark attempt to fix the test_bsddb3 failure on sparc and S-390 ubuntu buildbots. ........ r58344 | gregory.p.smith | 2007-10-06 00:51:59 -0700 (Sat, 06 Oct 2007) | 2 lines Allows BerkeleyDB 4.6.x >= 4.6.21 for the bsddb module. ........ r58348 | gregory.p.smith | 2007-10-06 08:47:37 -0700 (Sat, 06 Oct 2007) | 3 lines Use the host the author likely meant in the first place. pop.gmail.com is reliable. gmail.org is someones personal domain. ........ r58351 | neal.norwitz | 2007-10-06 12:16:28 -0700 (Sat, 06 Oct 2007) | 3 lines Ensure that this test will pass even if another test left an unwritable TESTFN. Also use the safe unlink in test_support instead of rolling our own here. ........ r58368 | georg.brandl | 2007-10-08 00:50:24 -0700 (Mon, 08 Oct 2007) | 3 lines #1123: fix the docs for the str.split(None, sep) case. Also expand a few other methods' docs, which had more info in the deprecated string module docs. ........ r58369 | georg.brandl | 2007-10-08 01:06:05 -0700 (Mon, 08 Oct 2007) | 2 lines Update docstring of sched, also remove an unused assignment. ........ r58370 | raymond.hettinger | 2007-10-08 02:14:28 -0700 (Mon, 08 Oct 2007) | 5 lines Add comments to NamedTuple code. Let the field spec be either a string or a non-string sequence (suggested by Martin Blais with use cases). Improve the error message in the case of a SyntaxError (caused by a duplicate field name). ........ r58371 | raymond.hettinger | 2007-10-08 02:56:29 -0700 (Mon, 08 Oct 2007) | 1 line Missed a line in the docs ........ r58372 | raymond.hettinger | 2007-10-08 03:11:51 -0700 (Mon, 08 Oct 2007) | 1 line Better variable names ........ r58376 | georg.brandl | 2007-10-08 07:12:47 -0700 (Mon, 08 Oct 2007) | 3 lines #1199: docs for tp_as_{number,sequence,mapping}, by Amaury Forgeot d'Arc. No need to merge this to py3k! ........ r58380 | raymond.hettinger | 2007-10-08 14:26:58 -0700 (Mon, 08 Oct 2007) | 1 line Eliminate camelcase function name ........ r58381 | andrew.kuchling | 2007-10-08 16:23:03 -0700 (Mon, 08 Oct 2007) | 1 line Eliminate camelcase function name ........ r58382 | raymond.hettinger | 2007-10-08 18:36:23 -0700 (Mon, 08 Oct 2007) | 1 line Make the error messages more specific ........ r58384 | gregory.p.smith | 2007-10-08 23:02:21 -0700 (Mon, 08 Oct 2007) | 10 lines Splits Modules/_bsddb.c up into bsddb.h and _bsddb.c and adds a C API object available as bsddb.db.api. This is based on the patch submitted by Duncan Grisby here: http://sourceforge.net/tracker/index.php?func=detail&aid=1551895&group_id=13900&atid=313900 See this thread for additional info: http://sourceforge.net/mailarchive/forum.php?thread_name=E1GAVDK-0002rk-Iw%40apasphere.com&forum_name=pybsddb-users It also cleans up the code a little by removing some ifdef/endifs for python prior to 2.1 and for unsupported Berkeley DB <= 3.2. ........ r58385 | gregory.p.smith | 2007-10-08 23:50:43 -0700 (Mon, 08 Oct 2007) | 5 lines Fix a double free when positioning a database cursor to a non-existant string key (and probably a few other situations with string keys). This was reported with a patch as pybsddb sourceforge bug 1708868 by jjjhhhlll at gmail. ........ r58386 | gregory.p.smith | 2007-10-09 00:19:11 -0700 (Tue, 09 Oct 2007) | 3 lines Use the highest cPickle protocol in bsddb.dbshelve. This comes from sourceforge pybsddb patch 1551443 by w_barnes. ........ r58394 | gregory.p.smith | 2007-10-09 11:26:02 -0700 (Tue, 09 Oct 2007) | 2 lines remove another sleepycat reference ........ r58396 | kurt.kaiser | 2007-10-09 12:31:30 -0700 (Tue, 09 Oct 2007) | 3 lines Allow interrupt only when executing user code in subprocess Patch 1225 Tal Einat modified from IDLE-Spoon. ........ r58399 | brett.cannon | 2007-10-09 17:07:50 -0700 (Tue, 09 Oct 2007) | 5 lines Remove file-level typedefs that were inconsistently used throughout the file. Just move over to the public API names. Closes issue1238. ........ r58401 | raymond.hettinger | 2007-10-09 17:26:46 -0700 (Tue, 09 Oct 2007) | 1 line Accept Jim Jewett's api suggestion to use None instead of -1 to indicate unbounded deques. ........ r58403 | kurt.kaiser | 2007-10-09 17:55:40 -0700 (Tue, 09 Oct 2007) | 2 lines Allow cursor color change w/o restart. Patch 1725576 Tal Einat. ........ r58404 | kurt.kaiser | 2007-10-09 18:06:47 -0700 (Tue, 09 Oct 2007) | 2 lines show paste if > 80 columns. Patch 1659326 Tal Einat. ........ r58415 | thomas.heller | 2007-10-11 12:51:32 -0700 (Thu, 11 Oct 2007) | 5 lines On OS X, use os.uname() instead of gestalt.sysv(...) to get the operating system version. This allows to use ctypes when Python was configured with --disable-toolbox-glue. ........ r58419 | neal.norwitz | 2007-10-11 20:01:01 -0700 (Thu, 11 Oct 2007) | 1 line Get rid of warning about not being able to create an existing directory. ........ r58420 | neal.norwitz | 2007-10-11 20:01:30 -0700 (Thu, 11 Oct 2007) | 1 line Get rid of warnings on a bunch of platforms by using a proper prototype. ........ r58421 | neal.norwitz | 2007-10-11 20:01:54 -0700 (Thu, 11 Oct 2007) | 4 lines Get rid of compiler warning about retval being used (returned) without being initialized. (gcc warning and Coverity 202) ........ r58422 | neal.norwitz | 2007-10-11 20:03:23 -0700 (Thu, 11 Oct 2007) | 1 line Fix Coverity 168: Close the file before returning (exiting). ........ r58423 | neal.norwitz | 2007-10-11 20:04:18 -0700 (Thu, 11 Oct 2007) | 4 lines Fix Coverity 180: Don't overallocate. We don't need structs, but pointers. Also fix a memory leak. ........ r58424 | neal.norwitz | 2007-10-11 20:05:19 -0700 (Thu, 11 Oct 2007) | 5 lines Fix Coverity 185-186: If the passed in FILE is NULL, uninitialized memory would be accessed. Will backport. ........ r58425 | neal.norwitz | 2007-10-11 20:52:34 -0700 (Thu, 11 Oct 2007) | 1 line Get this module to compile with bsddb versions prior to 4.3 ........ r58430 | martin.v.loewis | 2007-10-12 01:56:52 -0700 (Fri, 12 Oct 2007) | 3 lines Bug #1216: Restore support for Visual Studio 2002. Will backport to 2.5. ........ r58433 | raymond.hettinger | 2007-10-12 10:53:11 -0700 (Fri, 12 Oct 2007) | 1 line Fix test of count.__repr__() to ignore the 'L' if the count is a long ........ r58434 | gregory.p.smith | 2007-10-12 11:44:06 -0700 (Fri, 12 Oct 2007) | 4 lines Fixes http://bugs.python.org/issue1233 - bsddb.dbshelve.DBShelf.append was useless due to inverted logic. Also adds a test case for RECNO dbs to test_dbshelve. ........ r58445 | georg.brandl | 2007-10-13 06:20:03 -0700 (Sat, 13 Oct 2007) | 2 lines Fix email example. ........ r58450 | gregory.p.smith | 2007-10-13 16:02:05 -0700 (Sat, 13 Oct 2007) | 2 lines Fix an uncollectable reference leak in bsddb.db.DBShelf.append ........ r58453 | neal.norwitz | 2007-10-13 17:18:40 -0700 (Sat, 13 Oct 2007) | 8 lines Let the O/S supply a port if none of the default ports can be used. This should make the tests more robust at the expense of allowing tests to be sloppier by not requiring them to cleanup after themselves. (It will legitamitely help when running two test suites simultaneously or if another process is already using one of the predefined ports.) Also simplifies (slightLy) the exception handling elsewhere. ........ r58459 | neal.norwitz | 2007-10-14 11:30:21 -0700 (Sun, 14 Oct 2007) | 2 lines Don't raise a string exception, they don't work anymore. ........ r58460 | neal.norwitz | 2007-10-14 11:40:37 -0700 (Sun, 14 Oct 2007) | 1 line Use unittest for assertions ........ r58468 | armin.rigo | 2007-10-15 00:48:35 -0700 (Mon, 15 Oct 2007) | 2 lines test_bigbits was not testing what it seemed to. ........ r58471 | guido.van.rossum | 2007-10-15 08:54:11 -0700 (Mon, 15 Oct 2007) | 3 lines Change a PyErr_Print() into a PyErr_Clear(), per discussion in issue 1031213. ........ r58500 | raymond.hettinger | 2007-10-16 12:18:30 -0700 (Tue, 16 Oct 2007) | 1 line Improve error messages ........ r58506 | raymond.hettinger | 2007-10-16 14:28:32 -0700 (Tue, 16 Oct 2007) | 1 line More docs, error messages, and tests ........ r58507 | andrew.kuchling | 2007-10-16 15:58:03 -0700 (Tue, 16 Oct 2007) | 1 line Add items ........ r58508 | brett.cannon | 2007-10-16 16:24:06 -0700 (Tue, 16 Oct 2007) | 3 lines Remove ``:const:`` notation on None in parameter list. Since the markup is not rendered for parameters it just showed up as ``:const:`None` `` in the output. ........ r58509 | brett.cannon | 2007-10-16 16:26:45 -0700 (Tue, 16 Oct 2007) | 3 lines Re-order some functions whose parameters differ between PyObject and const char * so that they are next to each other. ........ r58522 | armin.rigo | 2007-10-17 11:46:37 -0700 (Wed, 17 Oct 2007) | 5 lines Fix the overflow checking of list_repeat. Introduce overflow checking into list_inplace_repeat. Backport candidate, possibly. ........ r58530 | facundo.batista | 2007-10-17 20:16:03 -0700 (Wed, 17 Oct 2007) | 7 lines Issue #1580738. When HTTPConnection reads the whole stream with read(), it closes itself. When the stream is read in several calls to read(n), it should behave in the same way if HTTPConnection knows where the end of the stream is (through self.length). Added a test case for this behaviour. ........ r58531 | facundo.batista | 2007-10-17 20:44:48 -0700 (Wed, 17 Oct 2007) | 3 lines Issue 1289, just a typo. ........ r58532 | gregory.p.smith | 2007-10-18 00:56:54 -0700 (Thu, 18 Oct 2007) | 4 lines cleanup test_dbtables to use mkdtemp. cleanup dbtables to pass txn as a keyword argument whenever possible to avoid bugs and confusion. (dbtables.py line 447 self.db.get using txn as a non-keyword was an actual bug due to this) ........ r58533 | gregory.p.smith | 2007-10-18 01:34:20 -0700 (Thu, 18 Oct 2007) | 4 lines Fix a weird bug in dbtables: if it chose a random rowid string that contained NULL bytes it would cause the database all sorts of problems in the future leading to very strange random failures and corrupt dbtables.bsdTableDb dbs. ........ r58534 | gregory.p.smith | 2007-10-18 09:32:02 -0700 (Thu, 18 Oct 2007) | 3 lines A cleaner fix than the one committed last night. Generate random rowids that do not contain null bytes. ........ r58537 | gregory.p.smith | 2007-10-18 10:17:57 -0700 (Thu, 18 Oct 2007) | 2 lines mention bsddb fixes. ........ r58538 | raymond.hettinger | 2007-10-18 14:13:06 -0700 (Thu, 18 Oct 2007) | 1 line Remove useless warning ........ r58539 | gregory.p.smith | 2007-10-19 00:31:20 -0700 (Fri, 19 Oct 2007) | 2 lines squelch the warning that this test is supposed to trigger. ........ r58542 | georg.brandl | 2007-10-19 05:32:39 -0700 (Fri, 19 Oct 2007) | 2 lines Clarify wording for apply(). ........ r58544 | mark.summerfield | 2007-10-19 05:48:17 -0700 (Fri, 19 Oct 2007) | 3 lines Added a cross-ref to each other. ........ r58545 | georg.brandl | 2007-10-19 10:38:49 -0700 (Fri, 19 Oct 2007) | 2 lines #1284: "S" means "seen", not unread. ........ r58548 | thomas.heller | 2007-10-19 11:11:41 -0700 (Fri, 19 Oct 2007) | 4 lines Fix ctypes on 32-bit systems when Python is configured --with-system-ffi. See also https://bugs.launchpad.net/bugs/72505. Ported from release25-maint branch. ........ r58550 | facundo.batista | 2007-10-19 12:25:57 -0700 (Fri, 19 Oct 2007) | 8 lines The constructor from tuple was way too permissive: it allowed bad coefficient numbers, floats in the sign, and other details that generated directly the wrong number in the best case, or triggered misfunctionality in the alorithms. Test cases added for these issues. Thanks Mark Dickinson. ........ r58559 | georg.brandl | 2007-10-20 06:22:53 -0700 (Sat, 20 Oct 2007) | 2 lines Fix code being interpreted as a target. ........ r58561 | georg.brandl | 2007-10-20 06:36:24 -0700 (Sat, 20 Oct 2007) | 2 lines Document new "cmdoption" directive. ........ r58562 | georg.brandl | 2007-10-20 08:21:22 -0700 (Sat, 20 Oct 2007) | 2 lines Make a path more Unix-standardy. ........ r58564 | georg.brandl | 2007-10-20 10:51:39 -0700 (Sat, 20 Oct 2007) | 2 lines Document new directive "envvar". ........ r58567 | georg.brandl | 2007-10-20 11:08:14 -0700 (Sat, 20 Oct 2007) | 6 lines * Add new toplevel chapter, "Using Python." (how to install, configure and setup python on different platforms -- at least in theory.) * Move the Python on Mac docs in that chapter. * Add a new chapter about the command line invocation, by stargaming. ........ r58568 | georg.brandl | 2007-10-20 11:33:20 -0700 (Sat, 20 Oct 2007) | 2 lines Change title, for now. ........ r58569 | georg.brandl | 2007-10-20 11:39:25 -0700 (Sat, 20 Oct 2007) | 2 lines Add entry to ACKS. ........ r58570 | georg.brandl | 2007-10-20 12:05:45 -0700 (Sat, 20 Oct 2007) | 2 lines Clarify -E docs. ........ r58571 | georg.brandl | 2007-10-20 12:08:36 -0700 (Sat, 20 Oct 2007) | 2 lines Even more clarification. ........ r58572 | andrew.kuchling | 2007-10-20 12:25:37 -0700 (Sat, 20 Oct 2007) | 1 line Fix protocol name ........ r58573 | andrew.kuchling | 2007-10-20 12:35:18 -0700 (Sat, 20 Oct 2007) | 1 line Various items ........ r58574 | andrew.kuchling | 2007-10-20 12:39:35 -0700 (Sat, 20 Oct 2007) | 1 line Use correct header line ........ r58576 | armin.rigo | 2007-10-21 02:14:15 -0700 (Sun, 21 Oct 2007) | 3 lines Add a crasher for the long-standing issue with closing a file while another thread uses it. ........ r58577 | georg.brandl | 2007-10-21 03:01:56 -0700 (Sun, 21 Oct 2007) | 2 lines Remove duplicate crasher. ........ r58578 | georg.brandl | 2007-10-21 03:24:20 -0700 (Sun, 21 Oct 2007) | 2 lines Unify "byte code" to "bytecode". Also sprinkle :term: markup for it. ........ r58579 | georg.brandl | 2007-10-21 03:32:54 -0700 (Sun, 21 Oct 2007) | 2 lines Add markup to new function descriptions. ........ r58580 | georg.brandl | 2007-10-21 03:45:46 -0700 (Sun, 21 Oct 2007) | 2 lines Add :term:s for descriptors. ........ r58581 | georg.brandl | 2007-10-21 03:46:24 -0700 (Sun, 21 Oct 2007) | 2 lines Unify "file-descriptor" to "file descriptor". ........ r58582 | georg.brandl | 2007-10-21 03:52:38 -0700 (Sun, 21 Oct 2007) | 2 lines Add :term: for generators. ........ r58583 | georg.brandl | 2007-10-21 05:10:28 -0700 (Sun, 21 Oct 2007) | 2 lines Add :term:s for iterator. ........ r58584 | georg.brandl | 2007-10-21 05:15:05 -0700 (Sun, 21 Oct 2007) | 2 lines Add :term:s for "new-style class". ........ r58588 | neal.norwitz | 2007-10-21 21:47:54 -0700 (Sun, 21 Oct 2007) | 1 line Add Chris Monson so he can edit PEPs. ........ r58594 | guido.van.rossum | 2007-10-22 09:27:19 -0700 (Mon, 22 Oct 2007) | 4 lines Issue #1307, patch by Derek Shockey. When "MAIL" is received without args, an exception happens instead of sending a 501 syntax error response. ........ r58598 | travis.oliphant | 2007-10-22 19:40:56 -0700 (Mon, 22 Oct 2007) | 1 line Add phuang patch from Issue 708374 which adds offset parameter to mmap module. ........ r58601 | neal.norwitz | 2007-10-22 22:44:27 -0700 (Mon, 22 Oct 2007) | 2 lines Bug #1313, fix typo (wrong variable name) in example. ........ r58609 | georg.brandl | 2007-10-23 11:21:35 -0700 (Tue, 23 Oct 2007) | 2 lines Update Pygments version from externals. ........ r58618 | guido.van.rossum | 2007-10-23 12:25:41 -0700 (Tue, 23 Oct 2007) | 3 lines Issue 1307 by Derek Shockey, fox the same bug for RCPT. Neal: please backport! ........ r58620 | raymond.hettinger | 2007-10-23 13:37:41 -0700 (Tue, 23 Oct 2007) | 1 line Shorter name for namedtuple() ........ r58621 | andrew.kuchling | 2007-10-23 13:55:47 -0700 (Tue, 23 Oct 2007) | 1 line Update name ........ r58622 | raymond.hettinger | 2007-10-23 14:23:07 -0700 (Tue, 23 Oct 2007) | 1 line Fixup news entry ........ r58623 | raymond.hettinger | 2007-10-23 18:28:33 -0700 (Tue, 23 Oct 2007) | 1 line Optimize sum() for integer and float inputs. ........ r58624 | raymond.hettinger | 2007-10-23 19:05:51 -0700 (Tue, 23 Oct 2007) | 1 line Fixup error return and add support for intermixed ints and floats/ ........ r58628 | vinay.sajip | 2007-10-24 03:47:06 -0700 (Wed, 24 Oct 2007) | 1 line Bug #1321: Fixed logic error in TimedRotatingFileHandler.__init__() ........ r58641 | facundo.batista | 2007-10-24 12:11:08 -0700 (Wed, 24 Oct 2007) | 4 lines Issue 1290. CharacterData.__repr__ was constructing a string in response that keeped having a non-ascii character. ........ r58643 | thomas.heller | 2007-10-24 12:50:45 -0700 (Wed, 24 Oct 2007) | 1 line Added unittest for calling a function with paramflags (backport from py3k branch). ........ r58645 | matthias.klose | 2007-10-24 13:00:44 -0700 (Wed, 24 Oct 2007) | 2 lines - Build using system ffi library on arm*-linux*. ........ r58651 | georg.brandl | 2007-10-24 14:40:38 -0700 (Wed, 24 Oct 2007) | 2 lines Bug #1287: make os.environ.pop() work as expected. ........ r58652 | raymond.hettinger | 2007-10-24 19:26:58 -0700 (Wed, 24 Oct 2007) | 1 line Missing DECREFs ........ r58653 | matthias.klose | 2007-10-24 23:37:24 -0700 (Wed, 24 Oct 2007) | 2 lines - Build using system ffi library on arm*-linux*, pass --with-system-ffi to CONFIG_ARGS ........ r58655 | thomas.heller | 2007-10-25 12:47:32 -0700 (Thu, 25 Oct 2007) | 2 lines ffi_type_longdouble may be already #defined. See issue 1324. ........ r58656 | kurt.kaiser | 2007-10-25 15:43:45 -0700 (Thu, 25 Oct 2007) | 3 lines Correct an ancient bug in an unused path by removing that path: register() is now idempotent. ........ r58660 | kurt.kaiser | 2007-10-25 17:10:09 -0700 (Thu, 25 Oct 2007) | 4 lines 1. Add comments to provide top-level documentation. 2. Refactor to use more descriptive names. 3. Enhance tests in main(). ........ r58675 | georg.brandl | 2007-10-26 11:30:41 -0700 (Fri, 26 Oct 2007) | 2 lines Fix new pop() method on os.environ on ignorecase-platforms. ........ r58696 | neal.norwitz | 2007-10-27 15:32:21 -0700 (Sat, 27 Oct 2007) | 1 line Update URL for Pygments. 0.8.1 is no longer available ........ r58697 | hyeshik.chang | 2007-10-28 04:19:02 -0700 (Sun, 28 Oct 2007) | 3 lines - Add support for FreeBSD 8 which is recently forked from FreeBSD 7. - Regenerate IN module for most recent maintenance tree of FreeBSD 6 and 7. ........ r58698 | hyeshik.chang | 2007-10-28 05:38:09 -0700 (Sun, 28 Oct 2007) | 2 lines Enable platform-specific tweaks for FreeBSD 8 (exactly same to FreeBSD 7's yet) ........ r58700 | kurt.kaiser | 2007-10-28 12:03:59 -0700 (Sun, 28 Oct 2007) | 2 lines Add confirmation dialog before printing. Patch 1717170 Tal Einat. ........ r58706 | guido.van.rossum | 2007-10-29 13:52:45 -0700 (Mon, 29 Oct 2007) | 3 lines Patch 1353 by Jacob Winther. Add mp4 mapping to mimetypes.py. ........ r58709 | guido.van.rossum | 2007-10-29 15:15:05 -0700 (Mon, 29 Oct 2007) | 6 lines Backport fixes for the code that decodes octal escapes (and for PyString also hex escapes) -- this was reaching beyond the end of the input string buffer, even though it is not supposed to be \0-terminated. This has no visible effect but is clearly the correct thing to do. (In 3.0 it had a visible effect after removing ob_sstate from PyString.) ........ r58710 | kurt.kaiser | 2007-10-29 19:38:54 -0700 (Mon, 29 Oct 2007) | 7 lines check in Tal Einat's update to tabpage.py Patch 1612746 M configDialog.py M NEWS.txt AM tabbedpages.py ........ r58715 | georg.brandl | 2007-10-30 10:51:18 -0700 (Tue, 30 Oct 2007) | 2 lines Use correct markup. ........ r58716 | georg.brandl | 2007-10-30 10:57:12 -0700 (Tue, 30 Oct 2007) | 2 lines Make example about hiding None return values at the prompt clearer. ........ r58728 | neal.norwitz | 2007-10-30 23:33:20 -0700 (Tue, 30 Oct 2007) | 1 line Fix some compiler warnings for signed comparisons on Unix and Windows. ........ r58731 | martin.v.loewis | 2007-10-31 10:19:33 -0700 (Wed, 31 Oct 2007) | 2 lines Adding Christian Heimes. ........ r58737 | raymond.hettinger | 2007-10-31 14:57:58 -0700 (Wed, 31 Oct 2007) | 1 line Clarify the reasons why pickle is almost always better than marshal ........ r58739 | raymond.hettinger | 2007-10-31 15:15:49 -0700 (Wed, 31 Oct 2007) | 1 line Sets are marshalable. ........
2007-11-01 17:32:30 -03:00
The installer will try to compile pure modules into :term:`bytecode` after installation
2007-08-15 11:28:22 -03:00
on the target system in normal and optimizing mode. If you don't want this to
happen for some reason, you can run the :command:`bdist_wininst` command with
the :option:`--no-target-compile` and/or the :option:`--no-target-optimize`
option.
By default the installer will display the cool "Python Powered" logo when it is
run, but you can also supply your own bitmap which must be a Windows
:file:`.bmp` file with the :option:`--bitmap` option.
The installer will also display a large title on the desktop background window
when it is run, which is constructed from the name of your distribution and the
version number. This can be changed to another text by using the
:option:`--title` option.
The installer file will be written to the "distribution directory" --- normally
:file:`dist/`, but customizable with the :option:`--dist-dir` option.
Merged revisions 62194,62197-62198,62204-62205,62214,62219-62221,62227,62229-62231,62233-62235,62237-62239 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r62194 | jeffrey.yasskin | 2008-04-07 01:04:28 +0200 (Mon, 07 Apr 2008) | 7 lines Add enough debugging information to diagnose failures where the HandlerBException is ignored, and fix one such problem, where it was thrown during the __del__ method of the previous Popen object. We may want to find a better way of printing verbose information so it's not spammy when the test passes. ........ r62197 | mark.hammond | 2008-04-07 03:53:39 +0200 (Mon, 07 Apr 2008) | 2 lines Issue #2513: enable 64bit cross compilation on windows. ........ r62198 | mark.hammond | 2008-04-07 03:59:40 +0200 (Mon, 07 Apr 2008) | 2 lines correct heading underline for new "Cross-compiling on Windows" section ........ r62204 | gregory.p.smith | 2008-04-07 08:33:21 +0200 (Mon, 07 Apr 2008) | 4 lines Use the new PyFile_IncUseCount & PyFile_DecUseCount calls appropriatly within the standard library. These modules use PyFile_AsFile and later release the GIL while operating on the previously returned FILE*. ........ r62205 | mark.summerfield | 2008-04-07 09:39:23 +0200 (Mon, 07 Apr 2008) | 4 lines changed "2500 components" to "several thousand" since the number keeps growning:-) ........ r62214 | georg.brandl | 2008-04-07 20:51:59 +0200 (Mon, 07 Apr 2008) | 2 lines #2525: update timezone info examples in the docs. ........ r62219 | andrew.kuchling | 2008-04-08 01:57:07 +0200 (Tue, 08 Apr 2008) | 1 line Write PEP 3127 section; add items ........ r62220 | andrew.kuchling | 2008-04-08 01:57:21 +0200 (Tue, 08 Apr 2008) | 1 line Typo fix ........ r62221 | andrew.kuchling | 2008-04-08 03:33:10 +0200 (Tue, 08 Apr 2008) | 1 line Typographical fix: 32bit -> 32-bit, 64bit -> 64-bit ........ r62227 | andrew.kuchling | 2008-04-08 23:22:53 +0200 (Tue, 08 Apr 2008) | 1 line Add items ........ r62229 | amaury.forgeotdarc | 2008-04-08 23:27:42 +0200 (Tue, 08 Apr 2008) | 7 lines Issue2564: Prevent a hang in "import test.autotest", which runs the entire test suite as a side-effect of importing the module. - in test_capi, a thread tried to import other modules - re.compile() imported sre_parse again on every call. ........ r62230 | amaury.forgeotdarc | 2008-04-08 23:51:57 +0200 (Tue, 08 Apr 2008) | 2 lines Prevent an error when inspect.isabstract() is called with something else than a new-style class. ........ r62231 | amaury.forgeotdarc | 2008-04-09 00:07:05 +0200 (Wed, 09 Apr 2008) | 8 lines Issue 2408: remove the _types module It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType), when they can easily be obtained with python code. These expressions even work with Jython. I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 ) at least this change makes it simpler. ........ r62233 | amaury.forgeotdarc | 2008-04-09 01:10:07 +0200 (Wed, 09 Apr 2008) | 2 lines Add a NEWS entry for previous checkin ........ r62234 | trent.nelson | 2008-04-09 01:47:30 +0200 (Wed, 09 Apr 2008) | 37 lines - Issue #2550: The approach used by client/server code for obtaining ports to listen on in network-oriented tests has been refined in an effort to facilitate running multiple instances of the entire regression test suite in parallel without issue. test_support.bind_port() has been fixed such that it will always return a unique port -- which wasn't always the case with the previous implementation, especially if socket options had been set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The new implementation of bind_port() will actually raise an exception if it is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or SO_REUSEPORT socket option set. Furthermore, if available, bind_port() will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed. This currently only applies to Windows. This option prevents any other sockets from binding to the host/port we've bound to, thus removing the possibility of the 'non-deterministic' behaviour, as Microsoft puts it, that occurs when a second SOCK_STREAM socket binds and accepts to a host/port that's already been bound by another socket. The optional preferred port parameter to bind_port() has been removed. Under no circumstances should tests be hard coding ports! test_support.find_unused_port() has also been introduced, which will pass a temporary socket object to bind_port() in order to obtain an unused port. The temporary socket object is then closed and deleted, and the port is returned. This method should only be used for obtaining an unused port in order to pass to an external program (i.e. the -accept [port] argument to openssl's s_server mode) or as a parameter to a server-oriented class that doesn't give you direct access to the underlying socket used. Finally, test_support.HOST has been introduced, which should be used for the host argument of any relevant socket calls (i.e. bind and connect). The following tests were updated to following the new conventions: test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib, test_poplib, test_ftplib, test_telnetlib, test_socketserver, test_asynchat and test_socket_ssl. It is now possible for multiple instances of the regression test suite to run in parallel without issue. ........ r62235 | gregory.p.smith | 2008-04-09 02:25:17 +0200 (Wed, 09 Apr 2008) | 3 lines Fix zlib crash from zlib.decompressobj().flush(val) when val was not positive. It tried to allocate negative or zero memory. That fails. ........ r62237 | trent.nelson | 2008-04-09 02:34:53 +0200 (Wed, 09 Apr 2008) | 1 line Fix typo with regards to self.PORT shadowing class variables with the same name. ........ r62238 | andrew.kuchling | 2008-04-09 03:08:32 +0200 (Wed, 09 Apr 2008) | 1 line Add items ........ r62239 | jerry.seutter | 2008-04-09 07:07:58 +0200 (Wed, 09 Apr 2008) | 1 line Changed test so it no longer runs as a side effect of importing. ........
2008-04-09 05:37:03 -03:00
.. _cross-compile-windows:
Cross-compiling on Windows
==========================
2009-01-03 17:18:54 -04:00
Starting with Python 2.6, distutils is capable of cross-compiling between
Windows platforms. In practice, this means that with the correct tools
Merged revisions 62194,62197-62198,62204-62205,62214,62219-62221,62227,62229-62231,62233-62235,62237-62239 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r62194 | jeffrey.yasskin | 2008-04-07 01:04:28 +0200 (Mon, 07 Apr 2008) | 7 lines Add enough debugging information to diagnose failures where the HandlerBException is ignored, and fix one such problem, where it was thrown during the __del__ method of the previous Popen object. We may want to find a better way of printing verbose information so it's not spammy when the test passes. ........ r62197 | mark.hammond | 2008-04-07 03:53:39 +0200 (Mon, 07 Apr 2008) | 2 lines Issue #2513: enable 64bit cross compilation on windows. ........ r62198 | mark.hammond | 2008-04-07 03:59:40 +0200 (Mon, 07 Apr 2008) | 2 lines correct heading underline for new "Cross-compiling on Windows" section ........ r62204 | gregory.p.smith | 2008-04-07 08:33:21 +0200 (Mon, 07 Apr 2008) | 4 lines Use the new PyFile_IncUseCount & PyFile_DecUseCount calls appropriatly within the standard library. These modules use PyFile_AsFile and later release the GIL while operating on the previously returned FILE*. ........ r62205 | mark.summerfield | 2008-04-07 09:39:23 +0200 (Mon, 07 Apr 2008) | 4 lines changed "2500 components" to "several thousand" since the number keeps growning:-) ........ r62214 | georg.brandl | 2008-04-07 20:51:59 +0200 (Mon, 07 Apr 2008) | 2 lines #2525: update timezone info examples in the docs. ........ r62219 | andrew.kuchling | 2008-04-08 01:57:07 +0200 (Tue, 08 Apr 2008) | 1 line Write PEP 3127 section; add items ........ r62220 | andrew.kuchling | 2008-04-08 01:57:21 +0200 (Tue, 08 Apr 2008) | 1 line Typo fix ........ r62221 | andrew.kuchling | 2008-04-08 03:33:10 +0200 (Tue, 08 Apr 2008) | 1 line Typographical fix: 32bit -> 32-bit, 64bit -> 64-bit ........ r62227 | andrew.kuchling | 2008-04-08 23:22:53 +0200 (Tue, 08 Apr 2008) | 1 line Add items ........ r62229 | amaury.forgeotdarc | 2008-04-08 23:27:42 +0200 (Tue, 08 Apr 2008) | 7 lines Issue2564: Prevent a hang in "import test.autotest", which runs the entire test suite as a side-effect of importing the module. - in test_capi, a thread tried to import other modules - re.compile() imported sre_parse again on every call. ........ r62230 | amaury.forgeotdarc | 2008-04-08 23:51:57 +0200 (Tue, 08 Apr 2008) | 2 lines Prevent an error when inspect.isabstract() is called with something else than a new-style class. ........ r62231 | amaury.forgeotdarc | 2008-04-09 00:07:05 +0200 (Wed, 09 Apr 2008) | 8 lines Issue 2408: remove the _types module It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType), when they can easily be obtained with python code. These expressions even work with Jython. I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 ) at least this change makes it simpler. ........ r62233 | amaury.forgeotdarc | 2008-04-09 01:10:07 +0200 (Wed, 09 Apr 2008) | 2 lines Add a NEWS entry for previous checkin ........ r62234 | trent.nelson | 2008-04-09 01:47:30 +0200 (Wed, 09 Apr 2008) | 37 lines - Issue #2550: The approach used by client/server code for obtaining ports to listen on in network-oriented tests has been refined in an effort to facilitate running multiple instances of the entire regression test suite in parallel without issue. test_support.bind_port() has been fixed such that it will always return a unique port -- which wasn't always the case with the previous implementation, especially if socket options had been set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The new implementation of bind_port() will actually raise an exception if it is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or SO_REUSEPORT socket option set. Furthermore, if available, bind_port() will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed. This currently only applies to Windows. This option prevents any other sockets from binding to the host/port we've bound to, thus removing the possibility of the 'non-deterministic' behaviour, as Microsoft puts it, that occurs when a second SOCK_STREAM socket binds and accepts to a host/port that's already been bound by another socket. The optional preferred port parameter to bind_port() has been removed. Under no circumstances should tests be hard coding ports! test_support.find_unused_port() has also been introduced, which will pass a temporary socket object to bind_port() in order to obtain an unused port. The temporary socket object is then closed and deleted, and the port is returned. This method should only be used for obtaining an unused port in order to pass to an external program (i.e. the -accept [port] argument to openssl's s_server mode) or as a parameter to a server-oriented class that doesn't give you direct access to the underlying socket used. Finally, test_support.HOST has been introduced, which should be used for the host argument of any relevant socket calls (i.e. bind and connect). The following tests were updated to following the new conventions: test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib, test_poplib, test_ftplib, test_telnetlib, test_socketserver, test_asynchat and test_socket_ssl. It is now possible for multiple instances of the regression test suite to run in parallel without issue. ........ r62235 | gregory.p.smith | 2008-04-09 02:25:17 +0200 (Wed, 09 Apr 2008) | 3 lines Fix zlib crash from zlib.decompressobj().flush(val) when val was not positive. It tried to allocate negative or zero memory. That fails. ........ r62237 | trent.nelson | 2008-04-09 02:34:53 +0200 (Wed, 09 Apr 2008) | 1 line Fix typo with regards to self.PORT shadowing class variables with the same name. ........ r62238 | andrew.kuchling | 2008-04-09 03:08:32 +0200 (Wed, 09 Apr 2008) | 1 line Add items ........ r62239 | jerry.seutter | 2008-04-09 07:07:58 +0200 (Wed, 09 Apr 2008) | 1 line Changed test so it no longer runs as a side effect of importing. ........
2008-04-09 05:37:03 -03:00
installed, you can use a 32bit version of Windows to create 64bit extensions
and vice-versa.
2009-01-03 17:18:54 -04:00
To build for an alternate platform, specify the :option:`--plat-name` option
to the build command. Valid values are currently 'win32', 'win-amd64' and
Merged revisions 62194,62197-62198,62204-62205,62214,62219-62221,62227,62229-62231,62233-62235,62237-62239 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r62194 | jeffrey.yasskin | 2008-04-07 01:04:28 +0200 (Mon, 07 Apr 2008) | 7 lines Add enough debugging information to diagnose failures where the HandlerBException is ignored, and fix one such problem, where it was thrown during the __del__ method of the previous Popen object. We may want to find a better way of printing verbose information so it's not spammy when the test passes. ........ r62197 | mark.hammond | 2008-04-07 03:53:39 +0200 (Mon, 07 Apr 2008) | 2 lines Issue #2513: enable 64bit cross compilation on windows. ........ r62198 | mark.hammond | 2008-04-07 03:59:40 +0200 (Mon, 07 Apr 2008) | 2 lines correct heading underline for new "Cross-compiling on Windows" section ........ r62204 | gregory.p.smith | 2008-04-07 08:33:21 +0200 (Mon, 07 Apr 2008) | 4 lines Use the new PyFile_IncUseCount & PyFile_DecUseCount calls appropriatly within the standard library. These modules use PyFile_AsFile and later release the GIL while operating on the previously returned FILE*. ........ r62205 | mark.summerfield | 2008-04-07 09:39:23 +0200 (Mon, 07 Apr 2008) | 4 lines changed "2500 components" to "several thousand" since the number keeps growning:-) ........ r62214 | georg.brandl | 2008-04-07 20:51:59 +0200 (Mon, 07 Apr 2008) | 2 lines #2525: update timezone info examples in the docs. ........ r62219 | andrew.kuchling | 2008-04-08 01:57:07 +0200 (Tue, 08 Apr 2008) | 1 line Write PEP 3127 section; add items ........ r62220 | andrew.kuchling | 2008-04-08 01:57:21 +0200 (Tue, 08 Apr 2008) | 1 line Typo fix ........ r62221 | andrew.kuchling | 2008-04-08 03:33:10 +0200 (Tue, 08 Apr 2008) | 1 line Typographical fix: 32bit -> 32-bit, 64bit -> 64-bit ........ r62227 | andrew.kuchling | 2008-04-08 23:22:53 +0200 (Tue, 08 Apr 2008) | 1 line Add items ........ r62229 | amaury.forgeotdarc | 2008-04-08 23:27:42 +0200 (Tue, 08 Apr 2008) | 7 lines Issue2564: Prevent a hang in "import test.autotest", which runs the entire test suite as a side-effect of importing the module. - in test_capi, a thread tried to import other modules - re.compile() imported sre_parse again on every call. ........ r62230 | amaury.forgeotdarc | 2008-04-08 23:51:57 +0200 (Tue, 08 Apr 2008) | 2 lines Prevent an error when inspect.isabstract() is called with something else than a new-style class. ........ r62231 | amaury.forgeotdarc | 2008-04-09 00:07:05 +0200 (Wed, 09 Apr 2008) | 8 lines Issue 2408: remove the _types module It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType), when they can easily be obtained with python code. These expressions even work with Jython. I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 ) at least this change makes it simpler. ........ r62233 | amaury.forgeotdarc | 2008-04-09 01:10:07 +0200 (Wed, 09 Apr 2008) | 2 lines Add a NEWS entry for previous checkin ........ r62234 | trent.nelson | 2008-04-09 01:47:30 +0200 (Wed, 09 Apr 2008) | 37 lines - Issue #2550: The approach used by client/server code for obtaining ports to listen on in network-oriented tests has been refined in an effort to facilitate running multiple instances of the entire regression test suite in parallel without issue. test_support.bind_port() has been fixed such that it will always return a unique port -- which wasn't always the case with the previous implementation, especially if socket options had been set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The new implementation of bind_port() will actually raise an exception if it is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or SO_REUSEPORT socket option set. Furthermore, if available, bind_port() will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed. This currently only applies to Windows. This option prevents any other sockets from binding to the host/port we've bound to, thus removing the possibility of the 'non-deterministic' behaviour, as Microsoft puts it, that occurs when a second SOCK_STREAM socket binds and accepts to a host/port that's already been bound by another socket. The optional preferred port parameter to bind_port() has been removed. Under no circumstances should tests be hard coding ports! test_support.find_unused_port() has also been introduced, which will pass a temporary socket object to bind_port() in order to obtain an unused port. The temporary socket object is then closed and deleted, and the port is returned. This method should only be used for obtaining an unused port in order to pass to an external program (i.e. the -accept [port] argument to openssl's s_server mode) or as a parameter to a server-oriented class that doesn't give you direct access to the underlying socket used. Finally, test_support.HOST has been introduced, which should be used for the host argument of any relevant socket calls (i.e. bind and connect). The following tests were updated to following the new conventions: test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib, test_poplib, test_ftplib, test_telnetlib, test_socketserver, test_asynchat and test_socket_ssl. It is now possible for multiple instances of the regression test suite to run in parallel without issue. ........ r62235 | gregory.p.smith | 2008-04-09 02:25:17 +0200 (Wed, 09 Apr 2008) | 3 lines Fix zlib crash from zlib.decompressobj().flush(val) when val was not positive. It tried to allocate negative or zero memory. That fails. ........ r62237 | trent.nelson | 2008-04-09 02:34:53 +0200 (Wed, 09 Apr 2008) | 1 line Fix typo with regards to self.PORT shadowing class variables with the same name. ........ r62238 | andrew.kuchling | 2008-04-09 03:08:32 +0200 (Wed, 09 Apr 2008) | 1 line Add items ........ r62239 | jerry.seutter | 2008-04-09 07:07:58 +0200 (Wed, 09 Apr 2008) | 1 line Changed test so it no longer runs as a side effect of importing. ........
2008-04-09 05:37:03 -03:00
'win-ia64'. For example, on a 32bit version of Windows, you could execute::
python setup.py build --plat-name=win-amd64
2009-01-03 17:18:54 -04:00
to build a 64bit version of your extension. The Windows Installers also
Merged revisions 62194,62197-62198,62204-62205,62214,62219-62221,62227,62229-62231,62233-62235,62237-62239 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r62194 | jeffrey.yasskin | 2008-04-07 01:04:28 +0200 (Mon, 07 Apr 2008) | 7 lines Add enough debugging information to diagnose failures where the HandlerBException is ignored, and fix one such problem, where it was thrown during the __del__ method of the previous Popen object. We may want to find a better way of printing verbose information so it's not spammy when the test passes. ........ r62197 | mark.hammond | 2008-04-07 03:53:39 +0200 (Mon, 07 Apr 2008) | 2 lines Issue #2513: enable 64bit cross compilation on windows. ........ r62198 | mark.hammond | 2008-04-07 03:59:40 +0200 (Mon, 07 Apr 2008) | 2 lines correct heading underline for new "Cross-compiling on Windows" section ........ r62204 | gregory.p.smith | 2008-04-07 08:33:21 +0200 (Mon, 07 Apr 2008) | 4 lines Use the new PyFile_IncUseCount & PyFile_DecUseCount calls appropriatly within the standard library. These modules use PyFile_AsFile and later release the GIL while operating on the previously returned FILE*. ........ r62205 | mark.summerfield | 2008-04-07 09:39:23 +0200 (Mon, 07 Apr 2008) | 4 lines changed "2500 components" to "several thousand" since the number keeps growning:-) ........ r62214 | georg.brandl | 2008-04-07 20:51:59 +0200 (Mon, 07 Apr 2008) | 2 lines #2525: update timezone info examples in the docs. ........ r62219 | andrew.kuchling | 2008-04-08 01:57:07 +0200 (Tue, 08 Apr 2008) | 1 line Write PEP 3127 section; add items ........ r62220 | andrew.kuchling | 2008-04-08 01:57:21 +0200 (Tue, 08 Apr 2008) | 1 line Typo fix ........ r62221 | andrew.kuchling | 2008-04-08 03:33:10 +0200 (Tue, 08 Apr 2008) | 1 line Typographical fix: 32bit -> 32-bit, 64bit -> 64-bit ........ r62227 | andrew.kuchling | 2008-04-08 23:22:53 +0200 (Tue, 08 Apr 2008) | 1 line Add items ........ r62229 | amaury.forgeotdarc | 2008-04-08 23:27:42 +0200 (Tue, 08 Apr 2008) | 7 lines Issue2564: Prevent a hang in "import test.autotest", which runs the entire test suite as a side-effect of importing the module. - in test_capi, a thread tried to import other modules - re.compile() imported sre_parse again on every call. ........ r62230 | amaury.forgeotdarc | 2008-04-08 23:51:57 +0200 (Tue, 08 Apr 2008) | 2 lines Prevent an error when inspect.isabstract() is called with something else than a new-style class. ........ r62231 | amaury.forgeotdarc | 2008-04-09 00:07:05 +0200 (Wed, 09 Apr 2008) | 8 lines Issue 2408: remove the _types module It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType), when they can easily be obtained with python code. These expressions even work with Jython. I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 ) at least this change makes it simpler. ........ r62233 | amaury.forgeotdarc | 2008-04-09 01:10:07 +0200 (Wed, 09 Apr 2008) | 2 lines Add a NEWS entry for previous checkin ........ r62234 | trent.nelson | 2008-04-09 01:47:30 +0200 (Wed, 09 Apr 2008) | 37 lines - Issue #2550: The approach used by client/server code for obtaining ports to listen on in network-oriented tests has been refined in an effort to facilitate running multiple instances of the entire regression test suite in parallel without issue. test_support.bind_port() has been fixed such that it will always return a unique port -- which wasn't always the case with the previous implementation, especially if socket options had been set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The new implementation of bind_port() will actually raise an exception if it is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or SO_REUSEPORT socket option set. Furthermore, if available, bind_port() will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed. This currently only applies to Windows. This option prevents any other sockets from binding to the host/port we've bound to, thus removing the possibility of the 'non-deterministic' behaviour, as Microsoft puts it, that occurs when a second SOCK_STREAM socket binds and accepts to a host/port that's already been bound by another socket. The optional preferred port parameter to bind_port() has been removed. Under no circumstances should tests be hard coding ports! test_support.find_unused_port() has also been introduced, which will pass a temporary socket object to bind_port() in order to obtain an unused port. The temporary socket object is then closed and deleted, and the port is returned. This method should only be used for obtaining an unused port in order to pass to an external program (i.e. the -accept [port] argument to openssl's s_server mode) or as a parameter to a server-oriented class that doesn't give you direct access to the underlying socket used. Finally, test_support.HOST has been introduced, which should be used for the host argument of any relevant socket calls (i.e. bind and connect). The following tests were updated to following the new conventions: test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib, test_poplib, test_ftplib, test_telnetlib, test_socketserver, test_asynchat and test_socket_ssl. It is now possible for multiple instances of the regression test suite to run in parallel without issue. ........ r62235 | gregory.p.smith | 2008-04-09 02:25:17 +0200 (Wed, 09 Apr 2008) | 3 lines Fix zlib crash from zlib.decompressobj().flush(val) when val was not positive. It tried to allocate negative or zero memory. That fails. ........ r62237 | trent.nelson | 2008-04-09 02:34:53 +0200 (Wed, 09 Apr 2008) | 1 line Fix typo with regards to self.PORT shadowing class variables with the same name. ........ r62238 | andrew.kuchling | 2008-04-09 03:08:32 +0200 (Wed, 09 Apr 2008) | 1 line Add items ........ r62239 | jerry.seutter | 2008-04-09 07:07:58 +0200 (Wed, 09 Apr 2008) | 1 line Changed test so it no longer runs as a side effect of importing. ........
2008-04-09 05:37:03 -03:00
support this option, so the command::
python setup.py build --plat-name=win-amd64 bdist_wininst
would create a 64bit installation executable on your 32bit version of Windows.
2009-01-03 17:18:54 -04:00
To cross-compile, you must download the Python source code and cross-compile
Merged revisions 62194,62197-62198,62204-62205,62214,62219-62221,62227,62229-62231,62233-62235,62237-62239 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r62194 | jeffrey.yasskin | 2008-04-07 01:04:28 +0200 (Mon, 07 Apr 2008) | 7 lines Add enough debugging information to diagnose failures where the HandlerBException is ignored, and fix one such problem, where it was thrown during the __del__ method of the previous Popen object. We may want to find a better way of printing verbose information so it's not spammy when the test passes. ........ r62197 | mark.hammond | 2008-04-07 03:53:39 +0200 (Mon, 07 Apr 2008) | 2 lines Issue #2513: enable 64bit cross compilation on windows. ........ r62198 | mark.hammond | 2008-04-07 03:59:40 +0200 (Mon, 07 Apr 2008) | 2 lines correct heading underline for new "Cross-compiling on Windows" section ........ r62204 | gregory.p.smith | 2008-04-07 08:33:21 +0200 (Mon, 07 Apr 2008) | 4 lines Use the new PyFile_IncUseCount & PyFile_DecUseCount calls appropriatly within the standard library. These modules use PyFile_AsFile and later release the GIL while operating on the previously returned FILE*. ........ r62205 | mark.summerfield | 2008-04-07 09:39:23 +0200 (Mon, 07 Apr 2008) | 4 lines changed "2500 components" to "several thousand" since the number keeps growning:-) ........ r62214 | georg.brandl | 2008-04-07 20:51:59 +0200 (Mon, 07 Apr 2008) | 2 lines #2525: update timezone info examples in the docs. ........ r62219 | andrew.kuchling | 2008-04-08 01:57:07 +0200 (Tue, 08 Apr 2008) | 1 line Write PEP 3127 section; add items ........ r62220 | andrew.kuchling | 2008-04-08 01:57:21 +0200 (Tue, 08 Apr 2008) | 1 line Typo fix ........ r62221 | andrew.kuchling | 2008-04-08 03:33:10 +0200 (Tue, 08 Apr 2008) | 1 line Typographical fix: 32bit -> 32-bit, 64bit -> 64-bit ........ r62227 | andrew.kuchling | 2008-04-08 23:22:53 +0200 (Tue, 08 Apr 2008) | 1 line Add items ........ r62229 | amaury.forgeotdarc | 2008-04-08 23:27:42 +0200 (Tue, 08 Apr 2008) | 7 lines Issue2564: Prevent a hang in "import test.autotest", which runs the entire test suite as a side-effect of importing the module. - in test_capi, a thread tried to import other modules - re.compile() imported sre_parse again on every call. ........ r62230 | amaury.forgeotdarc | 2008-04-08 23:51:57 +0200 (Tue, 08 Apr 2008) | 2 lines Prevent an error when inspect.isabstract() is called with something else than a new-style class. ........ r62231 | amaury.forgeotdarc | 2008-04-09 00:07:05 +0200 (Wed, 09 Apr 2008) | 8 lines Issue 2408: remove the _types module It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType), when they can easily be obtained with python code. These expressions even work with Jython. I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 ) at least this change makes it simpler. ........ r62233 | amaury.forgeotdarc | 2008-04-09 01:10:07 +0200 (Wed, 09 Apr 2008) | 2 lines Add a NEWS entry for previous checkin ........ r62234 | trent.nelson | 2008-04-09 01:47:30 +0200 (Wed, 09 Apr 2008) | 37 lines - Issue #2550: The approach used by client/server code for obtaining ports to listen on in network-oriented tests has been refined in an effort to facilitate running multiple instances of the entire regression test suite in parallel without issue. test_support.bind_port() has been fixed such that it will always return a unique port -- which wasn't always the case with the previous implementation, especially if socket options had been set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The new implementation of bind_port() will actually raise an exception if it is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or SO_REUSEPORT socket option set. Furthermore, if available, bind_port() will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed. This currently only applies to Windows. This option prevents any other sockets from binding to the host/port we've bound to, thus removing the possibility of the 'non-deterministic' behaviour, as Microsoft puts it, that occurs when a second SOCK_STREAM socket binds and accepts to a host/port that's already been bound by another socket. The optional preferred port parameter to bind_port() has been removed. Under no circumstances should tests be hard coding ports! test_support.find_unused_port() has also been introduced, which will pass a temporary socket object to bind_port() in order to obtain an unused port. The temporary socket object is then closed and deleted, and the port is returned. This method should only be used for obtaining an unused port in order to pass to an external program (i.e. the -accept [port] argument to openssl's s_server mode) or as a parameter to a server-oriented class that doesn't give you direct access to the underlying socket used. Finally, test_support.HOST has been introduced, which should be used for the host argument of any relevant socket calls (i.e. bind and connect). The following tests were updated to following the new conventions: test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib, test_poplib, test_ftplib, test_telnetlib, test_socketserver, test_asynchat and test_socket_ssl. It is now possible for multiple instances of the regression test suite to run in parallel without issue. ........ r62235 | gregory.p.smith | 2008-04-09 02:25:17 +0200 (Wed, 09 Apr 2008) | 3 lines Fix zlib crash from zlib.decompressobj().flush(val) when val was not positive. It tried to allocate negative or zero memory. That fails. ........ r62237 | trent.nelson | 2008-04-09 02:34:53 +0200 (Wed, 09 Apr 2008) | 1 line Fix typo with regards to self.PORT shadowing class variables with the same name. ........ r62238 | andrew.kuchling | 2008-04-09 03:08:32 +0200 (Wed, 09 Apr 2008) | 1 line Add items ........ r62239 | jerry.seutter | 2008-04-09 07:07:58 +0200 (Wed, 09 Apr 2008) | 1 line Changed test so it no longer runs as a side effect of importing. ........
2008-04-09 05:37:03 -03:00
Python itself for the platform you are targetting - it is not possible from a
binary installtion of Python (as the .lib etc file for other platforms are
2009-01-03 17:18:54 -04:00
not included.) In practice, this means the user of a 32 bit operating
system will need to use Visual Studio 2008 to open the
:file:`PCBuild/PCbuild.sln` solution in the Python source tree and build the
"x64" configuration of the 'pythoncore' project before cross-compiling
Merged revisions 62194,62197-62198,62204-62205,62214,62219-62221,62227,62229-62231,62233-62235,62237-62239 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r62194 | jeffrey.yasskin | 2008-04-07 01:04:28 +0200 (Mon, 07 Apr 2008) | 7 lines Add enough debugging information to diagnose failures where the HandlerBException is ignored, and fix one such problem, where it was thrown during the __del__ method of the previous Popen object. We may want to find a better way of printing verbose information so it's not spammy when the test passes. ........ r62197 | mark.hammond | 2008-04-07 03:53:39 +0200 (Mon, 07 Apr 2008) | 2 lines Issue #2513: enable 64bit cross compilation on windows. ........ r62198 | mark.hammond | 2008-04-07 03:59:40 +0200 (Mon, 07 Apr 2008) | 2 lines correct heading underline for new "Cross-compiling on Windows" section ........ r62204 | gregory.p.smith | 2008-04-07 08:33:21 +0200 (Mon, 07 Apr 2008) | 4 lines Use the new PyFile_IncUseCount & PyFile_DecUseCount calls appropriatly within the standard library. These modules use PyFile_AsFile and later release the GIL while operating on the previously returned FILE*. ........ r62205 | mark.summerfield | 2008-04-07 09:39:23 +0200 (Mon, 07 Apr 2008) | 4 lines changed "2500 components" to "several thousand" since the number keeps growning:-) ........ r62214 | georg.brandl | 2008-04-07 20:51:59 +0200 (Mon, 07 Apr 2008) | 2 lines #2525: update timezone info examples in the docs. ........ r62219 | andrew.kuchling | 2008-04-08 01:57:07 +0200 (Tue, 08 Apr 2008) | 1 line Write PEP 3127 section; add items ........ r62220 | andrew.kuchling | 2008-04-08 01:57:21 +0200 (Tue, 08 Apr 2008) | 1 line Typo fix ........ r62221 | andrew.kuchling | 2008-04-08 03:33:10 +0200 (Tue, 08 Apr 2008) | 1 line Typographical fix: 32bit -> 32-bit, 64bit -> 64-bit ........ r62227 | andrew.kuchling | 2008-04-08 23:22:53 +0200 (Tue, 08 Apr 2008) | 1 line Add items ........ r62229 | amaury.forgeotdarc | 2008-04-08 23:27:42 +0200 (Tue, 08 Apr 2008) | 7 lines Issue2564: Prevent a hang in "import test.autotest", which runs the entire test suite as a side-effect of importing the module. - in test_capi, a thread tried to import other modules - re.compile() imported sre_parse again on every call. ........ r62230 | amaury.forgeotdarc | 2008-04-08 23:51:57 +0200 (Tue, 08 Apr 2008) | 2 lines Prevent an error when inspect.isabstract() is called with something else than a new-style class. ........ r62231 | amaury.forgeotdarc | 2008-04-09 00:07:05 +0200 (Wed, 09 Apr 2008) | 8 lines Issue 2408: remove the _types module It was only used as a helper in types.py to access types (GetSetDescriptorType and MemberDescriptorType), when they can easily be obtained with python code. These expressions even work with Jython. I don't know what the future of the types module is; (cf. discussion in http://bugs.python.org/issue1605 ) at least this change makes it simpler. ........ r62233 | amaury.forgeotdarc | 2008-04-09 01:10:07 +0200 (Wed, 09 Apr 2008) | 2 lines Add a NEWS entry for previous checkin ........ r62234 | trent.nelson | 2008-04-09 01:47:30 +0200 (Wed, 09 Apr 2008) | 37 lines - Issue #2550: The approach used by client/server code for obtaining ports to listen on in network-oriented tests has been refined in an effort to facilitate running multiple instances of the entire regression test suite in parallel without issue. test_support.bind_port() has been fixed such that it will always return a unique port -- which wasn't always the case with the previous implementation, especially if socket options had been set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The new implementation of bind_port() will actually raise an exception if it is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or SO_REUSEPORT socket option set. Furthermore, if available, bind_port() will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed. This currently only applies to Windows. This option prevents any other sockets from binding to the host/port we've bound to, thus removing the possibility of the 'non-deterministic' behaviour, as Microsoft puts it, that occurs when a second SOCK_STREAM socket binds and accepts to a host/port that's already been bound by another socket. The optional preferred port parameter to bind_port() has been removed. Under no circumstances should tests be hard coding ports! test_support.find_unused_port() has also been introduced, which will pass a temporary socket object to bind_port() in order to obtain an unused port. The temporary socket object is then closed and deleted, and the port is returned. This method should only be used for obtaining an unused port in order to pass to an external program (i.e. the -accept [port] argument to openssl's s_server mode) or as a parameter to a server-oriented class that doesn't give you direct access to the underlying socket used. Finally, test_support.HOST has been introduced, which should be used for the host argument of any relevant socket calls (i.e. bind and connect). The following tests were updated to following the new conventions: test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib, test_poplib, test_ftplib, test_telnetlib, test_socketserver, test_asynchat and test_socket_ssl. It is now possible for multiple instances of the regression test suite to run in parallel without issue. ........ r62235 | gregory.p.smith | 2008-04-09 02:25:17 +0200 (Wed, 09 Apr 2008) | 3 lines Fix zlib crash from zlib.decompressobj().flush(val) when val was not positive. It tried to allocate negative or zero memory. That fails. ........ r62237 | trent.nelson | 2008-04-09 02:34:53 +0200 (Wed, 09 Apr 2008) | 1 line Fix typo with regards to self.PORT shadowing class variables with the same name. ........ r62238 | andrew.kuchling | 2008-04-09 03:08:32 +0200 (Wed, 09 Apr 2008) | 1 line Add items ........ r62239 | jerry.seutter | 2008-04-09 07:07:58 +0200 (Wed, 09 Apr 2008) | 1 line Changed test so it no longer runs as a side effect of importing. ........
2008-04-09 05:37:03 -03:00
extensions is possible.
Note that by default, Visual Studio 2008 does not install 64bit compilers or
tools. You may need to reexecute the Visual Studio setup process and select
these tools (using Control Panel->[Add/Remove] Programs is a convenient way to
check or modify your existing install.)
2007-08-15 11:28:22 -03:00
.. _postinstallation-script:
The Postinstallation script
---------------------------
Starting with Python 2.3, a postinstallation script can be specified which the
:option:`--install-script` option. The basename of the script must be
specified, and the script filename must also be listed in the scripts argument
to the setup function.
This script will be run at installation time on the target system after all the
files have been copied, with ``argv[1]`` set to :option:`-install`, and again at
uninstallation time before the files are removed with ``argv[1]`` set to
:option:`-remove`.
The installation script runs embedded in the windows installer, every output
(``sys.stdout``, ``sys.stderr``) is redirected into a buffer and will be
displayed in the GUI after the script has finished.
Some functions especially useful in this context are available as additional
built-in functions in the installation script.
.. function:: directory_created(path)
file_created(path)
These functions should be called when a directory or file is created by the
postinstall script at installation time. It will register *path* with the
uninstaller, so that it will be removed when the distribution is uninstalled.
To be safe, directories are only removed if they are empty.
.. function:: get_special_folder_path(csidl_string)
This function can be used to retrieve special folder locations on Windows like
the Start Menu or the Desktop. It returns the full path to the folder.
*csidl_string* must be one of the following strings::
"CSIDL_APPDATA"
"CSIDL_COMMON_STARTMENU"
"CSIDL_STARTMENU"
"CSIDL_COMMON_DESKTOPDIRECTORY"
"CSIDL_DESKTOPDIRECTORY"
"CSIDL_COMMON_STARTUP"
"CSIDL_STARTUP"
"CSIDL_COMMON_PROGRAMS"
"CSIDL_PROGRAMS"
"CSIDL_FONTS"
If the folder cannot be retrieved, :exc:`OSError` is raised.
Which folders are available depends on the exact Windows version, and probably
also the configuration. For details refer to Microsoft's documentation of the
:cfunc:`SHGetSpecialFolderPath` function.
Merged revisions 62425-62429,62434-62436,62441,62444,62446-62448,62450-62455,62463,62465-62466,62469,62474,62476-62478,62480,62485,62492,62497-62498,62500,62507,62513-62514,62516,62521,62531,62535,62545-62546,62548-62551,62553-62559,62569,62574,62577,62593,62595,62604-62606,62608,62616,62626-62627,62636,62638,62644-62645,62647-62648,62651-62653,62656,62661,62663,62680,62686-62687,62696,62699-62703,62711 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ................ r62425 | andrew.kuchling | 2008-04-21 03:45:57 +0200 (Mon, 21 Apr 2008) | 1 line Comment typo ................ r62426 | mark.dickinson | 2008-04-21 03:55:50 +0200 (Mon, 21 Apr 2008) | 2 lines Silence 'r may be used uninitialized' compiler warning. ................ r62427 | andrew.kuchling | 2008-04-21 04:08:00 +0200 (Mon, 21 Apr 2008) | 1 line Markup fix ................ r62428 | andrew.kuchling | 2008-04-21 04:08:13 +0200 (Mon, 21 Apr 2008) | 1 line Wording changes ................ r62429 | andrew.kuchling | 2008-04-21 04:14:24 +0200 (Mon, 21 Apr 2008) | 1 line Add various items ................ r62434 | thomas.heller | 2008-04-21 15:46:55 +0200 (Mon, 21 Apr 2008) | 1 line Fix typo. ................ r62435 | david.goodger | 2008-04-21 16:40:22 +0200 (Mon, 21 Apr 2008) | 1 line corrections ("reStructuredText" is one word) ................ r62436 | david.goodger | 2008-04-21 16:43:33 +0200 (Mon, 21 Apr 2008) | 1 line capitalization ................ r62441 | gregory.p.smith | 2008-04-21 19:46:40 +0200 (Mon, 21 Apr 2008) | 2 lines explicitly flush after the ... since there wasn't a newline ................ r62444 | jeroen.ruigrok | 2008-04-21 22:15:39 +0200 (Mon, 21 Apr 2008) | 2 lines Windows x64 also falls under VER_PLATFORM_WIN32_NT. ................ r62446 | gregory.p.smith | 2008-04-21 23:31:08 +0200 (Mon, 21 Apr 2008) | 3 lines If sys.stdin is not a tty, fall back to default_getpass after printing a warning instead of failing with a termios.error. ................ r62447 | mark.dickinson | 2008-04-22 00:32:24 +0200 (Tue, 22 Apr 2008) | 8 lines test_math and test_cmath are failing on the FreeBSD 6.2 trunk buildbot, apparently because tanh(-0.) loses the sign of zero on that platform. If true, this is a bug in FreeBSD. Added a configure test to verify this. I still need to figure out how best to deal with this failure. ................ r62448 | amaury.forgeotdarc | 2008-04-22 00:35:30 +0200 (Tue, 22 Apr 2008) | 7 lines Issue 2665: On Windows, sys.stderr does not contain a valid file when running without a console. It seems to work, but will fail at the first flush. This causes IDLE to crash when too many warnings are printed. Will backport. ................ r62450 | benjamin.peterson | 2008-04-22 00:57:00 +0200 (Tue, 22 Apr 2008) | 2 lines Fix Sphinx warnings ................ r62451 | mark.dickinson | 2008-04-22 02:54:27 +0200 (Tue, 22 Apr 2008) | 3 lines Make configure test for tanh(-0.) == -0. committed in r62447 actually work. (The test wasn't properly linked with libm. Sigh.) ................ r62452 | benjamin.peterson | 2008-04-22 04:16:03 +0200 (Tue, 22 Apr 2008) | 2 lines Various io doc updates ................ r62453 | neal.norwitz | 2008-04-22 07:07:47 +0200 (Tue, 22 Apr 2008) | 1 line Add Thomas Lee ................ r62454 | gregory.p.smith | 2008-04-22 10:08:41 +0200 (Tue, 22 Apr 2008) | 8 lines Major improvements: * Default to using /dev/tty for the password prompt and input before falling back to sys.stdin and sys.stderr. * Use sys.stderr instead of sys.stdout. * print the 'password may be echoed' warning to stream used to display the prompt rather than always sys.stderr. * warn() with GetPassWarning when input may be echoed. ................ r62455 | gregory.p.smith | 2008-04-22 10:11:33 +0200 (Tue, 22 Apr 2008) | 2 lines update the getpass entry ................ r62463 | amaury.forgeotdarc | 2008-04-22 23:14:41 +0200 (Tue, 22 Apr 2008) | 5 lines Issue #2670: urllib2.build_opener() failed when two handlers derive the same default base class. Will backport. ................ r62465 | skip.montanaro | 2008-04-23 00:45:09 +0200 (Wed, 23 Apr 2008) | 3 lines Factor in documentation changes from issue 1753732. ................ r62466 | gregory.p.smith | 2008-04-23 03:06:42 +0200 (Wed, 23 Apr 2008) | 2 lines syntax fixup ................ r62469 | benjamin.peterson | 2008-04-23 22:38:06 +0200 (Wed, 23 Apr 2008) | 2 lines #2673 Fix example typo in optparse docs ................ r62474 | martin.v.loewis | 2008-04-24 11:50:50 +0200 (Thu, 24 Apr 2008) | 2 lines Add Guilherme Polo. ................ r62476 | martin.v.loewis | 2008-04-24 15:16:36 +0200 (Thu, 24 Apr 2008) | 3 lines Remove Py_Refcnt, Py_Type, Py_Size, as they were added only for backwards compatibility, yet 2.5 did not have them at all. ................ r62477 | martin.v.loewis | 2008-04-24 15:17:24 +0200 (Thu, 24 Apr 2008) | 2 lines Fix typo. ................ r62478 | martin.v.loewis | 2008-04-24 15:18:03 +0200 (Thu, 24 Apr 2008) | 2 lines Add Jesus Cea. ................ r62480 | amaury.forgeotdarc | 2008-04-24 20:07:05 +0200 (Thu, 24 Apr 2008) | 4 lines Issue2681: the literal 0o8 was wrongly accepted, and evaluated as float(0.0). This happened only when 8 is the first digit. Credits go to Lukas Meuser. ................ r62485 | amaury.forgeotdarc | 2008-04-24 22:10:26 +0200 (Thu, 24 Apr 2008) | 5 lines Disable gc when running test_trace, or we may record the __del__ of collected objects. See http://mail.python.org/pipermail/python-checkins/2008-April/068633.html the extra events perfectly match several calls to socket._fileobject.__del__() ................ r62492 | neal.norwitz | 2008-04-25 05:40:17 +0200 (Fri, 25 Apr 2008) | 1 line Fix typo (now -> no) ................ r62497 | armin.rigo | 2008-04-25 11:35:18 +0200 (Fri, 25 Apr 2008) | 2 lines A new crasher. ................ r62498 | thomas.heller | 2008-04-25 17:44:16 +0200 (Fri, 25 Apr 2008) | 1 line Add from_buffer and from_buffer_copy class methods to ctypes types. ................ r62500 | mark.dickinson | 2008-04-25 18:59:09 +0200 (Fri, 25 Apr 2008) | 3 lines Issue 2635: fix bug in the fix_sentence_endings option to textwrap.fill. ................ r62507 | benjamin.peterson | 2008-04-25 23:43:56 +0200 (Fri, 25 Apr 2008) | 2 lines Allow test_import to work when it is invoked directly ................ r62513 | georg.brandl | 2008-04-26 20:31:07 +0200 (Sat, 26 Apr 2008) | 2 lines #2691: document PyLong (s)size_t APIs, patch by Alexander Belopolsky. ................ r62514 | georg.brandl | 2008-04-26 20:32:17 +0200 (Sat, 26 Apr 2008) | 2 lines Add missing return type to dealloc. ................ r62516 | alexandre.vassalotti | 2008-04-27 02:52:24 +0200 (Sun, 27 Apr 2008) | 2 lines Fixed URL of PEP 205 in weakref's module docstring. ................ r62521 | georg.brandl | 2008-04-27 11:39:59 +0200 (Sun, 27 Apr 2008) | 2 lines #2677: add note that not all functions may accept keyword args. ................ r62531 | georg.brandl | 2008-04-27 19:38:55 +0200 (Sun, 27 Apr 2008) | 2 lines Use correct XHTML tags. ................ r62535 | benjamin.peterson | 2008-04-27 20:14:39 +0200 (Sun, 27 Apr 2008) | 2 lines #2700 Document PyNumber_ToBase ................ r62545 | skip.montanaro | 2008-04-27 22:53:57 +0200 (Sun, 27 Apr 2008) | 1 line minor wording changes, rewrap a few lines ................ r62546 | kurt.kaiser | 2008-04-27 23:07:41 +0200 (Sun, 27 Apr 2008) | 7 lines Home / Control-A toggles between left margin and end of leading white space. Patch 1196903 Jeff Shute. M idlelib/PyShell.py M idlelib/EditorWindow.py M idlelib/NEWS.txt ................ r62548 | kurt.kaiser | 2008-04-27 23:38:05 +0200 (Sun, 27 Apr 2008) | 2 lines Improved AutoCompleteWindow logic. Patch 2062 Tal Einat. ................ r62549 | kurt.kaiser | 2008-04-27 23:52:19 +0200 (Sun, 27 Apr 2008) | 4 lines Autocompletion of filenames now support alternate separators, e.g. the '/' char on Windows. Patch 2061 Tal Einat. ................ r62550 | skip.montanaro | 2008-04-28 00:49:56 +0200 (Mon, 28 Apr 2008) | 6 lines A few small changes: * The only exception we should catch when trying to import cStringIO is an ImportError. * Delete the function signatures embedded in the mk*temp docstrings. * The tempdir global variable was initialized twice. ................ r62551 | skip.montanaro | 2008-04-28 00:52:02 +0200 (Mon, 28 Apr 2008) | 4 lines Wrap some long paragraphs and include the default values for optional function parameters. ................ r62553 | skip.montanaro | 2008-04-28 04:57:23 +0200 (Mon, 28 Apr 2008) | 7 lines Minor cleanups: * Avoid creating unused local variables where we can. Where we can't prefix the unused variables with '_'. * Avoid shadowing builtins where it won't change the external interface of a function. * Use None as default path arg to readmodule and readmodule_ex. ................ r62554 | skip.montanaro | 2008-04-28 04:59:45 +0200 (Mon, 28 Apr 2008) | 6 lines Correct documentation to match implementation: "Class" instead of "class_descriptor", "Function" instead of "function_descriptor". Note default path value for readmodule*. Wrap some long paragraphs. Don't mention 'inpackage' which isn't part of the public API. ................ r62555 | brett.cannon | 2008-04-28 05:23:50 +0200 (Mon, 28 Apr 2008) | 5 lines Fix a bug introduced by the warnings rewrite where tracebacks were being improperly indented. Closes issue #2699. ................ r62556 | skip.montanaro | 2008-04-28 05:25:37 +0200 (Mon, 28 Apr 2008) | 2 lines Wrap some long lines. ................ r62557 | skip.montanaro | 2008-04-28 05:27:53 +0200 (Mon, 28 Apr 2008) | 6 lines Get rid of _test(), _main(), _debug() and _check(). Tests are no longer needed (better set available in Lib/test/test_robotparser.py). Clean up a few PEP 8 nits (compound statements on a single line, whitespace around operators). ................ r62558 | brett.cannon | 2008-04-28 06:50:06 +0200 (Mon, 28 Apr 2008) | 3 lines Rename the test_traceback_print() function to traceback_print() to prevent test_capi from automatically calling the function. ................ r62559 | georg.brandl | 2008-04-28 07:16:30 +0200 (Mon, 28 Apr 2008) | 2 lines Fix markup. ................ r62569 | amaury.forgeotdarc | 2008-04-28 23:07:06 +0200 (Mon, 28 Apr 2008) | 5 lines test_sundry performs minimal tests (a simple import...) on modules that are not tested otherwise. Some of them now have tests and can be removed. Only 70 to go... ................ r62574 | andrew.kuchling | 2008-04-29 04:03:54 +0200 (Tue, 29 Apr 2008) | 1 line Strip down SSL docs; I'm not managing to get test programs working, so I'll just give a minimal description ................ r62577 | martin.v.loewis | 2008-04-29 08:10:53 +0200 (Tue, 29 Apr 2008) | 2 lines Add Rodrigo and Heiko. ................ r62593 | nick.coghlan | 2008-04-30 16:23:36 +0200 (Wed, 30 Apr 2008) | 1 line Update command line usage documentation to reflect 2.6 changes (also includes some minor cleanups). Addresses TODO list issue 2258 ................ r62595 | andrew.kuchling | 2008-04-30 18:19:55 +0200 (Wed, 30 Apr 2008) | 1 line Typo fix ................ r62604 | benjamin.peterson | 2008-04-30 23:03:58 +0200 (Wed, 30 Apr 2008) | 2 lines make test_support's captured_output a bit more robust when exceptions happen ................ r62605 | georg.brandl | 2008-04-30 23:08:42 +0200 (Wed, 30 Apr 2008) | 2 lines #1748: use functools.wraps instead of rolling own metadata update. ................ r62606 | benjamin.peterson | 2008-04-30 23:25:55 +0200 (Wed, 30 Apr 2008) | 2 lines Remove some from __future__ import with_statements ................ r62608 | benjamin.peterson | 2008-05-01 00:03:36 +0200 (Thu, 01 May 2008) | 2 lines Fix typo in whatsnew ................ r62616 | georg.brandl | 2008-05-01 20:24:32 +0200 (Thu, 01 May 2008) | 2 lines Fix synopsis. ................ r62626 | brett.cannon | 2008-05-02 04:25:09 +0200 (Fri, 02 May 2008) | 6 lines Fix a backwards-compatibility mistake where a new optional argument for warnings.showwarning() was being used. This broke pre-existing replacements for the function since they didn't support the extra argument. Closes issue 2705. ................ r62627 | gregory.p.smith | 2008-05-02 09:26:52 +0200 (Fri, 02 May 2008) | 20 lines This should fix issue2632. A long description of the two competing problems is in the bug report (one old, one recently introduced trying to fix the old one). In short: buffer data during socket._fileobject.read() and readlines() within a cStringIO object instead of a [] of str()s returned from the recv() call. This prevents excessive memory use due to the size parameter being passed to recv() being grossly larger than the actual size of the data returned *and* prevents excessive cpu usage due to looping in python calling recv() with a very tiny size value if min() is used as the previous memory-use bug "fix" did. It also documents what the socket._fileobject._rbufsize member is actually used for. This is a candidate for back porting to 2.5. ................ r62636 | mark.hammond | 2008-05-02 14:48:15 +0200 (Fri, 02 May 2008) | 2 lines #2581: Vista UAC/elevation support for bdist_wininst ................ r62638 | facundo.batista | 2008-05-02 19:39:00 +0200 (Fri, 02 May 2008) | 3 lines Fixed some test structures. Thanks Mark Dickinson. ................ r62644 | ronald.oussoren | 2008-05-02 21:45:11 +0200 (Fri, 02 May 2008) | 7 lines Fix for issue #2573: Can't change the framework name on OS X builds This introduces a new configure option: --with-framework-name=NAME (defaulting to 'Python'). This allows you to install several copies of the Python framework with different names (such as a normal build and a debug build). ................ r62645 | ronald.oussoren | 2008-05-02 21:58:56 +0200 (Fri, 02 May 2008) | 2 lines Finish fix for issue2573, previous patch was incomplete. ................ r62647 | martin.v.loewis | 2008-05-02 23:30:20 +0200 (Fri, 02 May 2008) | 13 lines Merged revisions 62263-62646 via svnmerge from svn+ssh://pythondev@svn.python.org/sandbox/trunk/2to3/lib2to3 ........ r62470 | david.wolever | 2008-04-24 02:11:07 +0200 (Do, 24 Apr 2008) | 3 lines Fixed up and applied the patch for #2431 -- speeding up 2to3 with a lookup table. ........ r62646 | martin.v.loewis | 2008-05-02 23:29:27 +0200 (Fr, 02 Mai 2008) | 2 lines Fix whitespace. ........ ................ r62648 | ronald.oussoren | 2008-05-02 23:42:35 +0200 (Fri, 02 May 2008) | 4 lines Fix for #1905: PythonLauncher not working correctly on OSX 10.5/Leopard This fixes both Python Launchar and the terminalcommand module. ................ r62651 | ronald.oussoren | 2008-05-02 23:54:56 +0200 (Fri, 02 May 2008) | 2 lines Fix for issue #2520 (cannot import macerrors) ................ r62652 | benjamin.peterson | 2008-05-03 00:12:58 +0200 (Sat, 03 May 2008) | 2 lines capitalization nit for reStructuredText ................ r62653 | brett.cannon | 2008-05-03 03:02:41 +0200 (Sat, 03 May 2008) | 2 lines Fix some indentation errors. ................ r62656 | brett.cannon | 2008-05-03 05:19:39 +0200 (Sat, 03 May 2008) | 6 lines Fix the C implementation of 'warnings' to infer the filename of the module that raised an exception properly when __file__ is not set, __name__ == '__main__', and sys.argv[0] is a false value. Closes issue2743. ................ r62661 | amaury.forgeotdarc | 2008-05-03 14:21:13 +0200 (Sat, 03 May 2008) | 8 lines In test_io, StatefulIncrementalDecoderTest was not part of the test suite. And of course, the test failed: a bytearray was used without reason in io.TextIOWrapper.tell(). The difference is that iterating over bytes (i.e. str in python2.6) returns 1-char bytes, whereas bytearrays yield integers. This code should still work with python3.0 ................ r62663 | benjamin.peterson | 2008-05-03 17:56:42 +0200 (Sat, 03 May 2008) | 2 lines The compiling struct is now passed around to all AST helpers (see issue 2720) ................ r62680 | benjamin.peterson | 2008-05-03 23:35:18 +0200 (Sat, 03 May 2008) | 2 lines Moved testing of builtin types out of test_builtin and into type specific modules ................ r62686 | mark.dickinson | 2008-05-04 04:25:46 +0200 (Sun, 04 May 2008) | 4 lines Make sure that Context traps and flags dictionaries have values 0 and 1 (as documented) rather than True and False. ................ r62687 | benjamin.peterson | 2008-05-04 05:05:49 +0200 (Sun, 04 May 2008) | 2 lines Fix typo in whatsnew ................ r62696 | georg.brandl | 2008-05-04 11:15:04 +0200 (Sun, 04 May 2008) | 2 lines #2752: wrong meaning of '' for socket host. ................ r62699 | christian.heimes | 2008-05-04 13:50:53 +0200 (Sun, 04 May 2008) | 1 line Added note that Python requires at least Win2k SP4 ................ r62700 | gerhard.haering | 2008-05-04 14:59:57 +0200 (Sun, 04 May 2008) | 3 lines SQLite requires 64-bit integers in order to build. So the whole HAVE_LONG_LONG #ifdefing was useless. ................ r62701 | gerhard.haering | 2008-05-04 15:15:12 +0200 (Sun, 04 May 2008) | 3 lines Applied sqliterow-richcmp.diff patch from Thomas Heller in Issue2152. The sqlite3.Row type is now correctly hashable. ................ r62702 | gerhard.haering | 2008-05-04 15:42:44 +0200 (Sun, 04 May 2008) | 5 lines Implemented feature request 2157: Converter names are cut off at '(' characters. This avoids the common case of something like 'NUMBER(10)' not being parsed as 'NUMBER', like expected. Also corrected the docs about converter names being case-sensitive. They aren't any longer. ................ r62703 | georg.brandl | 2008-05-04 17:45:05 +0200 (Sun, 04 May 2008) | 2 lines #2757: Remove spare newline. ................ r62711 | benjamin.peterson | 2008-05-04 21:10:02 +0200 (Sun, 04 May 2008) | 2 lines Fix typo in bugs.rst ................
2008-05-04 19:42:01 -03:00
Vista User Access Control (UAC)
===============================
Starting with Python 2.6, bdist_wininst supports a :option:`--user-access-control`
option. The default is 'none' (meaning no UAC handling is done), and other
valid values are 'auto' (meaning prompt for UAC elevation if Python was
installed for all users) and 'force' (meaning always prompt for elevation)
2007-08-15 11:28:22 -03:00
.. function:: create_shortcut(target, description, filename[, arguments[, workdir[, iconpath[, iconindex]]]])
This function creates a shortcut. *target* is the path to the program to be
started by the shortcut. *description* is the description of the shortcut.
*filename* is the title of the shortcut that the user will see. *arguments*
specifies the command line arguments, if any. *workdir* is the working directory
for the program. *iconpath* is the file containing the icon for the shortcut,
and *iconindex* is the index of the icon in the file *iconpath*. Again, for
details consult the Microsoft documentation for the :class:`IShellLink`
interface.