cpython/Doc/perl/l2hinit.perl

483 lines
15 KiB
Plaintext
Raw Normal View History

#LaTeX2HTML Version 96.1 : dot.latex2html-init -*- perl -*-
#
# Significantly revised by Fred L. Drake, Jr. <fdrake@acm.org> for use
# with the Python documentation.
#
# New name to avoid distributing "dot" files with the Python documentation.
#
package Override;
use Cwd qw(getcwd);
package main;
$HTML_VERSION = 4.0;
$MAX_LINK_DEPTH = 2;
1998-04-23 17:06:24 -03:00
$ADDRESS = '';
$NO_FOOTNODE = 1;
$NUMBERED_FOOTNOTES = 1;
# Python documentation uses section numbers to support references to match
# in the printed and online versions.
#
$SHOW_SECTION_NUMBERS = 1;
$ICONSERVER = '../icons';
# Control where the navigation bars should show up:
$TOP_NAVIGATION = 1;
$BOTTOM_NAVIGATION = 1;
$AUTO_NAVIGATION = 0;
1998-08-07 13:43:29 -03:00
$BODYTEXT = 'bgcolor="#ffffff"';
$CHILDLINE = "\n<p><hr>\n";
$VERBOSITY = 0;
# default # of columns for the indexes
1998-08-07 16:52:37 -03:00
$INDEX_COLUMNS = 2;
$MODULE_INDEX_COLUMNS = 5;
1998-08-07 16:52:37 -03:00
# A little painful, but lets us clean up the top level directory a little,
# and not be tied to the current directory (as far as I can tell).
#
use Cwd;
use File::Basename;
($myname, $mydir, $myext) = fileparse(__FILE__, '\..*');
chop $mydir; # remove trailing '/'
$mydir = getcwd() . "$dd$mydir"
unless $mydir =~ s|^/|/|;
$LATEX2HTMLSTYLES = "$mydir$envkey$LATEX2HTMLSTYLES";
push (@INC, $mydir);
($myrootname, $myrootdir, $myext) = fileparse($mydir, '\..*');
chop $myrootdir;
1998-05-15 14:14:17 -03:00
# Hackish way to get the appropriate paper-*/ directory into $TEXINPUTS;
# pass in the paper size (a4 or letter) as the environment variable PAPER
# to add the right directory. If not given, the current directory is
# added instead for use with HOWTO processing.
#
if (defined $ENV{'PAPER'}) {
$mytexinputs = "$myrootdir${dd}paper-$ENV{'PAPER'}$envkey";
}
else {
$mytexinputs = getcwd() . $envkey;
}
$mytexinputs .= "$myrootdir${dd}texinputs";
sub custom_driver_hook{
#
# This adds the directory of the main input file to $TEXINPUTS; it
# seems to be sufficiently general that it should be fine for HOWTO
# processing.
#
my $file = @_[0];
my($jobname,$dir,$ext) = fileparse($file, '\..*');
$dir = make_directory_absolute($dir);
$dir =~ s/$dd$//;
$TEXINPUTS = "$dir$envkey$mytexinputs";
print "\nadding $dir to \$TEXINPUTS\n";
}
sub set_icon_size{
my($name, $w, $h) = @_;
$iconsizes{$name} = "width=$w height=$h";
}
foreach $name (split(/ /, 'up next previous contents index modules blank')) {
set_icon_size($name, 32, 32);
}
# The '_motif' is really annoying, and makes the HTML larger with no value
# added, so strip it off:
foreach $name (keys %icons) {
my $icon = $icons{$name};
# Strip off the wasteful '_motif':
$icon =~ s/_motif//;
# Change the greyed-out icons to be blank:
$icon =~ s/[a-z]*_gr/blank/;
$icons{$name} = $icon;
}
$icons{'blank'} = 'blank.' . $IMAGE_TYPE;
$CUSTOM_BUTTONS = '';
$BLANK_ICON = "\n<td>" . img_tag('blank.' . $IMAGE_TYPE) . "</td>";
$NAV_BGCOLOR = " bgcolor=\"#99CCFF\"";
sub make_nav_sectref{
my($label,$title) = @_;
if ($title) {
return ("<b class=navlabel>$label:</b> "
. "<span class=sectref>$title</span>\n");
}
return '';
}
sub make_nav_panel{
return ("<table width=\"100%\" cellpadding=0 cellspacing=2>\n<tr>"
. "\n<td>$NEXT</td>"
. "\n<td>$UP</td>"
. "\n<td>$PREVIOUS</td>"
. "\n<td align=center$NAV_BGCOLOR width=\"100%\">"
. "\n <b class=title>$t_title</b></td>"
. ($CONTENTS ? "\n<td>$CONTENTS</td>" : $BLANK_ICON)
. "\n<td>$CUSTOM_BUTTONS</td>" # module index
. ($INDEX ? "\n<td>$INDEX</td>" : $BLANK_ICON)
. "\n</tr></table>"
#. "<hr>"
. make_nav_sectref("Next", $NEXT_TITLE)
. make_nav_sectref("Up", $UP_TITLE)
. make_nav_sectref("Previous", $PREVIOUS_TITLE)
);
}
sub top_navigation_panel {
"<div class=navigation>\n"
. make_nav_panel()
. '<br><hr></div>';
}
sub bot_navigation_panel {
"<p>\n<div class=navigation><hr>"
. make_nav_panel()
. '</div>';
}
sub add_link {
# Returns a pair (iconic link, textual link)
my($icon, $current_file, @link) = @_;
my($dummy, $file, $title) = split($delim,
$section_info{join(' ',@link)});
if ($title && ($file ne $current_file)) {
$title = purify($title);
$title = get_first_words($title, $WORDS_IN_NAVIGATION_PANEL_TITLES);
return (make_href($file, $icon), make_href($file, "$title"))
}
elsif ($icon eq $up_visible_mark && $EXTERNAL_UP_LINK) {
return (make_href($EXTERNAL_UP_LINK, $icon),
make_href($EXTERNAL_UP_LINK, "$EXTERNAL_UP_TITLE"))
}
elsif (($icon eq $previous_visible_mark
|| $icon eq $previous_page_visible_mark)
&& $EXTERNAL_PREV_LINK && $EXTERNAL_PREV_TITLE) {
return (make_href($EXTERNAL_PREV_LINK, $icon),
make_href($EXTERNAL_PREV_LINK, "$EXTERNAL_PREV_TITLE"))
}
elsif (($icon eq $next_visible_mark
|| $icon eq $next_page_visible_mark)
&& $EXTERNAL_DOWN_LINK && $EXTERNAL_DOWN_TITLE) {
return (make_href($EXTERNAL_DOWN_LINK, $icon),
make_href($EXTERNAL_DOWN_LINK, "$EXTERNAL_DOWN_TITLE"))
}
(&inactive_img($icon), "");
}
sub add_special_link {
my($icon, $file, $current_file) = @_;
(($file && ($file ne $current_file)) ? make_href($file, $icon) : undef)
}
sub img_tag {
local($icon) = @_;
my $alt;
my $align = " align=bottom ";
# having this list hardcoded here is really bogus....
$alt = join('|', 'up', 'next_group', 'previous_group'
, 'next', 'previous', 'change_begin_right', 'change_begin'
, 'change_end_right', 'change_end', 'change_delete_right'
, 'change_delete', 'contents', 'index', 'modules', 'blank');
if ($icon =~ /(gif|png)$/) {
$used_icons{$icon} = 1;
if ($icon =~ /change_(begin|end|delete)_right/) { $align = ' ' };
my $nav_border = "$NAV_BORDER";
if ($icon =~ /($alt)/) {
$alt = $1;
}
else {
$nav_border = '1';
$alt = '[*]';
};
if ($LOCAL_ICONS) {
return join('', '<img ', $iconsizes{$1}, $align
,'border=', $nav_border, ' alt="', $alt
,'" src="', $icon, '">' );
}
return join('', '<img ', $iconsizes{$1}, $align
,'border=', $nav_border, ' alt="', $alt, "\"\n"
,' src="', $ICONSERVER, "/$icon", '">' );
}
else {
return $icon;
}
}
sub do_cmd_arabic {
# get rid of that nasty <SPAN CLASS="arabic">...</SPAN>
local($ctr, $val, $id, $_) = &read_counter_value(@_[0]);
return ($val ? &farabic($val) : "0") . $_;
}
sub gen_index_id {
# this is used to ensure common index key generation and a stable sort
my($str,$extra) = @_;
sprintf('%s###%s%010d', $str, $extra, ++$global{'max_id'});
}
sub make_index_entry {
my($br_id,$str) = @_;
# If TITLE is not yet available (i.e the \index command is in the title of the
# current section), use $ref_before.
$TITLE = $ref_before unless $TITLE;
# Save the reference
$str = gen_index_id($str, '');
$index{$str} .= make_half_href("$CURRENT_FILE#$br_id");
"<a name=\"$br_id\">$anchor_invisible_mark<\/a>";
}
sub insert_index{
my($mark,$datafile,$columns,$letters) = @_;
my $prog = "$myrootdir/tools/buildindex.py";
my $index;
if ($letters) {
$index = `$prog --columns $columns --letters $datafile`;
}
else {
$index = `$prog --columns $columns $datafile`;
}
s/$mark/$index/;
}
sub add_idx{
print "\nBuilding HTML for the index ...";
close(IDXFILE);
insert_index($idx_mark, 'index.dat', $INDEX_COLUMNS, 1);
}
$idx_module_mark = '<tex2html_idx_module_mark>';
$idx_module_title = 'Module Index';
sub add_module_idx{
print "\nBuilding HTML for the module index ...";
my $key;
open(MODIDXFILE, '>modindex.dat') || die "\n$!\n";
foreach $key (keys %Modules) {
# dump the line in the data file; just use a dummy seqno field
print MODIDXFILE "$Modules{$key}" . $IDXFILE_FIELD_SEP . "$key###\n";
}
close(MODIDXFILE);
insert_index($idx_module_mark, 'modindex.dat', $MODULE_INDEX_COLUMNS, 0);
}
# replace both indexes as needed:
sub add_idx_hook{
add_idx() if (/$idx_mark/);
add_module_idx() if (/$idx_module_mark/);
process_all_localmoduletables();
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_tableofcontents {
local($_) = @_;
$TITLE = $toc_title;
$tocfile = $CURRENT_FILE;
my($closures,$reopens) = preserve_open_tags();
anchor_label('contents', $CURRENT_FILE, $_); # this is added
join('', "<BR>\n\\tableofchildlinks[off]", $closures
, make_section_heading($toc_title, 'H2'), $toc_mark
, $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_listoffigures {
local($_) = @_;
$TITLE = $lof_title;
$loffile = $CURRENT_FILE;
my($closures,$reopens) = preserve_open_tags();
anchor_label('lof', $CURRENT_FILE, $_); # this is added
join('', "<BR>\n", $closures
, make_section_heading($lof_title, 'H2'), $lof_mark
, $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_listoftables {
local($_) = @_;
$TITLE = $lot_title;
$lotfile = $CURRENT_FILE;
my($closures,$reopens) = preserve_open_tags();
anchor_label('lot', $CURRENT_FILE, $_); # this is added
join('', "<BR>\n", $closures
, make_section_heading($lot_title, 'H2'), $lot_mark
, $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_textohtmlinfopage {
local($_) = @_;
if ($INFO) { #
anchor_label("about",$CURRENT_FILE,$_); # this is added
} #
my $the_version = ''; # and the rest is
if ($t_date) { # mostly ours
$the_version = ",\n$t_date";
if ($PYTHON_VERSION) {
$the_version .= ", Release $PYTHON_VERSION";
}
}
$_ = (($INFO == 1)
? join('', $close_all
, "<strong>$t_title</strong>$the_version\n"
, `cat $myrootdir${dd}html${dd}about.dat`
, $open_all, $_)
: join('', $close_all, $INFO,"\n", $open_all, $_));
$_;
}
# $idx_mark will be replaced with the real index at the end
sub do_cmd_textohtmlindex {
local($_) = @_;
$TITLE = $idx_title;
$idxfile = $CURRENT_FILE;
if (%index_labels) { make_index_labels(); }
if (($SHORT_INDEX) && (%index_segment)) { make_preindex(); }
else { $preindex = ''; }
my $heading = make_section_heading($idx_title, 'h2') . $idx_mark;
my($pre,$post) = minimize_open_tags($heading);
anchor_label('genindex',$CURRENT_FILE,$_); # this is added
'<br>\n' . $pre . $_;
}
# $idx_module_mark will be replaced with the real index at the end
sub do_cmd_textohtmlmoduleindex {
local($_) = @_;
$TITLE = $idx_module_title;
anchor_label("modindex",$CURRENT_FILE,$_);
'<p>' . make_section_heading($idx_module_title, "h2")
. $idx_module_mark . $_;
}
# The bibliography and the index should be treated as separate sections
# in their own HTML files. The \bibliography{} command acts as a sectioning command
# that has the desired effect. But when the bibliography is constructed
# manually using the thebibliography environment, or when using the
# theindex environment it is not possible to use the normal sectioning
# mechanism. This subroutine inserts a \bibliography{} or a dummy
# \textohtmlindex command just before the appropriate environments
# to force sectioning.
# XXX This *assumes* that if there are two {theindex} environments, the
# first is the module index and the second is the standard index. This
# is sufficient for the current Python documentation, but that's about
# it.
sub add_bbl_and_idx_dummy_commands {
my $id = $global{'max_id'};
s/([\\]begin\s*$O\d+$C\s*thebibliography)/$bbl_cnt++; $1/eg;
s/([\\]begin\s*$O\d+$C\s*thebibliography)/$id++; "\\bibliography$O$id$C$O$id$C $1"/geo
#if ($bbl_cnt == 1)
;
#}
#----------------------------------------------------------------------
# (FLD) This was added
my(@parts) = split(/\\begin\s*$O\d+$C\s*theindex/);
if (scalar(@parts) == 3) {
# Be careful to re-write the string in place, since $_ is *not*
# returned explicity; *** nasty side-effect dependency! ***
print "\nadd_bbl_and_idx_dummy_commands ==> adding module index";
my $rx = "([\\\\]begin\\s*$O\\d+$C\\s*theindex[\\s\\S]*)"
. "([\\\\]begin\\s*$O\\d+$C\\s*theindex)";
s/$rx/\\textohtmlmoduleindex \1 \\textohtmlindex \2/o;
# Add a button to the navigation areas:
$CUSTOM_BUTTONS .= ("<a\n href=\"modindex.html\">"
. img_tag('modules.'.$IMAGE_TYPE) . "</a>");
}
else {
$CUSTOM_BUTTONS .= img_tag('blank.' . $IMAGE_TYPE);
$global{'max_id'} = $id; # not sure why....
s/([\\]begin\s*$O\d+$C\s*theindex)/\\textohtmlindex $1/o;
s/[\\]printindex/\\textohtmlindex /o;
}
#----------------------------------------------------------------------
lib_add_bbl_and_idx_dummy_commands()
if defined(&lib_add_bbl_and_idx_dummy_commands);
}
# The bibliographic references, the appendices, the lists of figures and tables
# etc. must appear in the contents table at the same level as the outermost
# sectioning command. This subroutine finds what is the outermost level and
# sets the above to the same level;
sub set_depth_levels {
# Sets $outermost_level
my $level;
#RRM: do not alter user-set value for $MAX_SPLIT_DEPTH
foreach $level ("part", "chapter", "section", "subsection",
"subsubsection", "paragraph") {
last if (($outermost_level) = /\\($level)$delimiter_rx/);
}
$level = ($outermost_level ? $section_commands{$outermost_level} :
do {$outermost_level = 'section'; 3;});
#RRM: but calculate value for $MAX_SPLIT_DEPTH when a $REL_DEPTH was given
if ($REL_DEPTH && $MAX_SPLIT_DEPTH) {
$MAX_SPLIT_DEPTH = $level + $MAX_SPLIT_DEPTH;
} elsif (!($MAX_SPLIT_DEPTH)) { $MAX_SPLIT_DEPTH = 1 };
%unnumbered_section_commands = ('tableofcontents' => $level,
'listoffigures' => $level,
'listoftables' => $level,
'bibliography' => $level,
'textohtmlindex' => $level,
'textohtmlmoduleindex' => $level);
$section_headings{'textohtmlmoduleindex'} = 'h1';
%section_commands = (%unnumbered_section_commands,
%section_commands);
make_sections_rx();
}
# Fix from Ross Moore for ']' in \item[...]; this can be removed once the next
# patch to LaTeX2HTML is released and tested ... if the patch gets included.
# Be very careful to keep this around, just in case things break again!
#
sub protect_useritems {
local(*_) = @_;
local($preitems,$thisitem);
while (/\\item\s*\[/) {
$preitems .= $`;
$_ = $';
$thisitem = $&.'<<'.++$global{'max_id'}.'>>';
s/^(((($O|$OP)\d+($C|$CP)).*\3|<[^<>]*>|[^\]<]+)*)\]/$thisitem.=$1;''/e;
$preitems .= $thisitem . '<<' . $global{'max_id'} . '>>]';
s/^]//;
}
$_ = $preitems . $_;
}
# This changes the markup used for {verbatim} environments, and is the
# best way I've found that ensures the <dl> goes on the outside of the
# <pre>...</pre>.
#
# Note that this *must* be done in the init file, not the python.perl
# style support file. The %declarations must be set before initialize()
# is called in the main script.
#
%declarations = ('preform' => '<dl><dd><pre class=verbatim></pre></dl>',
%declarations);
1; # This must be the last line