Update Jetpack submodule commits

.dockerignore

@@ -1,3 +0,0 @@
-README.md
-Dockerfile
-.git

.github/workflows/build-docker.yaml

@@ -1,63 +0,0 @@
-name: Create and publish a Docker image
-
-on:
-  push:
-
-# Defines two custom environment variables for the workflow. These are used for the Container registry domain, and a name for the Docker image that this workflow builds.
-env:
-  REGISTRY: git.spirirobotics.com
-  IMAGE_NAME: ${{ github.repository }}
-
-# There is a single job in this workflow. It's configured to run on the latest available version of Ubuntu.
-jobs:
-  build-and-push-image:
-    runs-on: ubuntu-latest
-    container: ghcr.io/catthehacker/ubuntu:act-latest
-
-    # Sets the permissions granted to the `GITHUB_TOKEN` for the actions in this job.
-    permissions:
-      contents: read
-      packages: write
-      # 
-    steps:
-      #- name: install docker
-      #  run: apt install moby-cli -y    
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          lfs: true
-          submodules: true
-      # Uses the `docker/login-action` action to log in to the Container registry registry using the account and password that will publish the packages. Once published, the packages are scoped to the account defined here.
-      - name: Log in to the Container registry
-        uses: docker/login-action@65b78e6e13532edd9afa3aa52ac7964289d1a9c1
-        with:
-          registry: ${{ env.REGISTRY }}
-          username: ${{ github.actor }}
-          password: ${{ secrets.WORKFLOW_REGISTRY_TOKEN }}
-      # This step uses [docker/metadata-action](https://github.com/docker/metadata-action#about) to extract tags and labels that will be applied to the specified image. The `id` "meta" allows the output of this step to be referenced in a subsequent step. The `images` value provides the base name for the tags and labels.
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta
-        uses: docker/metadata-action@9ec57ed1fcdbf14dcef7dfbe97b2010124a938b7
-        with:
-          images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}
-
-      # - name: Set up QEMU
-      #   uses: docker/setup-qemu-action@v2
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-      # This step uses the `docker/build-push-action` action to build the image, based on your repository's `Dockerfile`. If the build succeeds, it pushes the image to GitHub Packages.
-      # It uses the `context` parameter to define the build's context as the set of files located in the specified path. For more information, see "[Usage](https://github.com/docker/build-push-action#usage)" in the README of the `docker/build-push-action` repository.
-      # It uses the `tags` and `labels` parameters to tag and label the image with the output from the "meta" step.
-      - name: Build Docker image
-        uses: docker/build-push-action@v5
-        env:
-          #Hack for gitea/github weirdness.
-          ACTIONS_RUNTIME_TOKEN: ''
-        with:
-          context: .
-          platforms: linux/arm64
-          push: true
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-

.gitmodules

@@ -1,16 +1,16 @@
 [submodule "source/Jetpack"]
 	path = source/Jetpack
 	url = https://git.spirirobotics.com/dchvs/Jetpack.git
-	branch = master
+	branch = cti-jetpack-4.4.1
 [submodule "source/drivers/li-mt9m021"]
 	path = source/drivers/li-mt9m021
 	url = https://git.spirirobotics.com/dchvs/li-mt9m021.git
-	branch = master
+	branch = jetpack-4.4.1
 [submodule "CTI-L4T"]
 	path = CTI-L4T
 	url = https://git.spirirobotics.com/dchvs/CTI-L4T.git
-	branch = master
+	branch = 4.4.1/feature/install-script-on-level2-directory
 [submodule "source/drivers/eg25-g"]
 	path = source/drivers/eg25-g
 	url = https://git.spirirobotics.com/dchvs/eg25-g.git
-	branch = master
+	branch = 4.4.1/tx2-cti/quectel-module

Dockerfile

@@ -1,36 +0,0 @@
-from --platform=linux/amd64 git.spirirobotics.com/spiri/tx2-flashing-tool:main as kernel-build
-
-RUN apt-get update
-RUN apt-get install -y ripgrep
-
-ADD ./source/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz /opt/gcc-linaro-7.3.1/
-ENV CROSS_COMPILE /opt/gcc-linaro-7.3.1/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
-
-ENV LINUX_FOR_TEGRA /jetson/Linux_for_Tegra
-ENV KERNEL_LOCATION_FROM_BUILD_DIR ../../spiri-project/source/Jetpack/kernel/kernel-4.9/
-ENV KERNEL_LOCATION $KERNEL_LOCATION_FROM_BUILD_DIR
-
-COPY ./ /jetson/Linux_for_Tegra/spiri-project
-
-WORKDIR /jetson/Linux_for_Tegra/spiri-project/CTI-L4T/
-RUN ./install.sh
-
-RUN mkdir -p /jetson/Linux_for_Tegra/builds/build_tx2/build
-
-WORKDIR /jetson/Linux_for_Tegra/builds/build_tx2/
-RUN make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ tegra_defconfig
-RUN nice make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ CROSS_COMPILE=${CROSS_COMPILE} -j$(nproc --ignore 2) --output-sync=target zImage dtbs modules
-
-#Fail if we're missing either of these kenel module
-RUN rg mt9m021 build/arch/arm64/boot/Image
-RUN rg eg25-g build/arch/arm64/boot/Image
-
-RUN mkdir -p /build/boot/
-RUN mkdir -p /build/lib/modules/
-
-FROM --platform=linux/arm64 scratch
-# FROM kernel-build
-
-COPY --from=kernel-build /jetson/Linux_for_Tegra/builds/build_tx2/build/arch/arm64/boot/Image /build/boot/spiriImage
-COPY --from=kernel-build /jetson/Linux_for_Tegra/builds/build_tx2/build/arch/arm64/boot/dts/tegra186-tx2-spiri-revF+.dtb /build/boot/
-COPY ./extlinux.conf /build/boot/extlinux/extlinux.conf

README.md

@@ -1,4 +1,5 @@
 The installation consists on creating a build area locatated at:
+
 ```bash
 Linux_for_Tegra/builds/build_<spiri>
 ```
@@ -23,14 +24,10 @@ source ~/.bashrc
 ### 2. Clone recursively the repository to the workspace's root to add the Jetpack+CTI 4.4.1 and Drivers MT9M021 and EG25-G 
 ```bash
 LINUX_FOR_TEGRA=<Linux_for_Tegra/ path>
-KERNEL_LOCATION_FROM_BUILD_DIR=../../spiri-project/source/Jetpack/kernel/kernel-4.9/
-KERNEL_LOCATION=$KERNEL_LOCATION_FROM_BUILD_DIR
-
 cd $LINUX_FOR_TEGRA
 
 git clone --recurse-submodules  https://git.spirirobotics.com/dchvs/spiri-project.git
 cd spiri-project
-
 git checkout master
 git submodule update --init --recursive --remote
 ```
@@ -46,14 +43,14 @@ sudo ./install.sh
 cd $LINUX_FOR_TEGRA/
 
 mkdir -p builds/build_<this build name> && cd builds/build_<this build name>
-mkdir build
+mkdir build modules
 
 # Create the Kernel configuration file
-make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ tegra_defconfig
+make -C ../../spiri-project/source/Jetpack/kernel/kernel-4.9/ ARCH=arm64 O=$PWD/build/ tegra_defconfig
 ```
 ```bash
 # Check for the Drivers with the "spiri" keyword
-make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ menuconfig
+make -C ../../spiri-project/source/Jetpack/kernel/kernel-4.9/ ARCH=arm64 O=$PWD/build/ menuconfig
 ```
 
 By default the Drivers are installed, the tegra_defconfig include them as:
@@ -72,7 +69,8 @@ You can review it on the Kernel Menuconfig, and find it out in the following pat
 
 ```bash
 # Build the Kernel, DTBs and modules
-make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ CROSS_COMPILE=${CROSS_COMPILE} -j8 --output-sync=target zImage dtbs modules
+make -C ../../spiri-project/source/Jetpack/kernel/kernel-4.9/ ARCH=arm64 O=$PWD/build/ CROSS_COMPILE=${CROSS_COMPILE} -j8 --output-sync=target zImage dtbs modules
+make -C ../../spiri-project/source/Jetpack/kernel/kernel-4.9/ ARCH=arm64 O=$PWD/build/ modules_install INSTALL_MOD_PATH=$PWD/modules 
 ```
 
 The deployed Kernel binaries after compilation could check if it has the Drivers in it, inspecting on it with rgrep:
@@ -86,25 +84,29 @@ Once the Kernel it's compiled, the output binaries should get installed on the J
 
 ```bash
 # Location for the Kernel files to be found by Tegra flash.sh script in full image installation
-+------------------------------------+     +---------------------+
-|    build/arch/arm64/boot/Image     | --> |     kernel/Image    |
-+------------------------------------+     +---------------------+
-+------------------------------------+     +---------------------+
-|    build/arch/arm64/boot/dts/*     | --> |     kernel/dtb/     |
-+------------------------------------+     +---------------------+
++-----------------------------+     +--------------+
+| build/arch/arm64/boot/Image | --> | kernel/Image |
++-----------------------------+     +--------------+
+
++-----------------------------+     +-------------+
+| build/arch/arm64/boot/dts/* | --> | kernel/dtb/ |
++-----------------------------+     +-------------+
+
 +------------------------------------+     +---------------------+
 | modules/lib/modules/4.9.140-tegra/ | --> | rootfs/lib/modules/ |
 +------------------------------------+     +---------------------+
 ```
 
 ```
+# Backup the default Kernel
+cp  -r ../../kernel/dtb/  ../../kernel/backup_dtb/
+cp  ../../kernel/Image  ../../kernel/backup_Image
+sudo mv  ../../rootfs/lib/modules/4.9.140-tegra/   ../../rootfs/lib/modules/backup_4.9.140-tegra/
+
 # Add the Kernel files for full image installation
-
-# Install the Kernel Image and DTBs
-make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ kernel_install INSTALL_PATH=$PWD/../../kernel/
-
-# Install the Drivers modules
-sudo make -C $KERNEL_LOCATION ARCH=arm64 O=$PWD/build/ modules_install INSTALL_MOD_PATH=$PWD/../../rootfs/
+cp build/arch/arm64/boot/dts/* ../../kernel/dtb/ 
+cp build/arch/arm64/boot/Image ../../kernel/
+sudo make -C ../../spiri-project/source/Jetpack/kernel/kernel-4.9/ ARCH=arm64 O=$PWD/build/ modules_install INSTALL_MOD_PATH=$PWD/../../rootfs/
 ```
 
 In order to flash the target device, do the following commands from the workspace's root:

extlinux.conf

@@ -1,12 +0,0 @@
-TIMEOUT 2
-DEFAULT primary
-
-MENU TITLE L4T boot options
-
-LABEL primary
-      MENU LABEL primary kernel
-      LINUX /boot/spiriImage
-      FDT /boot/tegra186-tx2-spiri-revF+.dtb
-      INITRD /boot/initrd
-      APPEND ${cbootargs} quiet
-

source/.gitattributes

@@ -1 +0,0 @@
-gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz filter=lfs diff=lfs merge=lfs -text

source/Jetpack

@@ -1 +1 @@
-Subproject commit 10faeae40c2ec8147da5dc141ba5f0d5ceafed37
+Subproject commit 95c069085f35530c71e4d216cbb298a917532e4b

source/drivers/eg25-g

@@ -1 +1 @@
-Subproject commit 771948b95dcd4ffb14abf0eb3cbf5f103e89c364
+Subproject commit 8ef1521acd107421302ce1c39dbf3b15e9c69da4

source/drivers/li-mt9m021

@@ -1 +1 @@
-Subproject commit a324c5b05e26adeab2d48bbcac04b7ba534415fc
+Subproject commit 14da17d421c75dcbb9731c7a5bf103fdddf7e154