Add DTB files

This commit is contained in:
dchvs 2021-01-20 09:45:49 -06:00
parent 4fa0b6b512
commit 32d9f5e2a5
7 changed files with 1419 additions and 0 deletions

View File

@ -0,0 +1,384 @@
/*Base include for cameras, sets up all the CSI and VI lanes etc,
include this file in any baord specific camera files */
#define CAM0_RST_L TEGRA_MAIN_GPIO(R, 5)
#define CAM0_PWDN TEGRA_MAIN_GPIO(R, 0)
//#define CAM1_RST_L TEGRA_MAIN_GPIO(R, 1)
//#define CAM1_PWDN TEGRA_MAIN_GPIO(L, 6)
/ {
tegra-camera-platform {
/**
* tpg_max_iso = <>;
* Max iso bw for 6 streams of tpg
* streams * nvcsi_freq * PG_bitrate / RG10 * BPP
* 6 * 102Mhz * 32 bits/ 10 bits * 2 Bps
* = 3916.8 MBps
*/
tpg_max_iso = <3916800>;
};
/* set camera gpio direction to output */
/* gpio@2200000 {
camera-control-output-low {
gpio-hog;
output-low;
gpios = <CAM0_RST_L 0 CAM0_PWDN 0
CAM1_RST_L 0 CAM1_PWDN 0>;
label = "cam0-rst", "cam0-pwdn",
"cam1-rst", "cam1-pwdn";
};
};*/
/* all cameras are disabled by default */
host1x {
vi_base: vi@15700000 {
num-channels = <6>;
ports {
#address-cells = <1>;
#size-cells = <0>;
vi_port0: port@0 {
reg = <0>;
status = "disabled";
vi_in0: endpoint {
status = "disabled";
};
};
vi_port1: port@1 {
reg = <1>;
status = "disabled";
vi_in1: endpoint {
status = "disabled";
};
};
vi_port2: port@2 {
reg = <2>;
status = "disabled";
vi_in2: endpoint {
status = "disabled";
};
};
vi_port3: port@3 {
reg = <3>;
status = "disabled";
vi_in3: endpoint {
status = "disabled";
};
};
vi_port4: port@4 {
reg = <4>;
status = "disabled";
vi_in4: endpoint {
status = "disabled";
};
};
vi_port5: port@5 {
reg = <5>;
status = "disabled";
vi_in5: endpoint {
status = "disabled";
};
};
};
};
csi_base: nvcsi@150c0000 {
#address-cells = <1>;
#size-cells = <0>;
num-channels = <6>;
status = "okay";
csi_chan0: channel@0 {
status = "disabled";
reg = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
csi_chan0_port0: port@0 {
status = "disabled";
reg = <0>;
csi_in0: endpoint@0 {
status = "disabled";
};
};
csi_chan0_port1: port@1 {
status = "disabled";
reg = <1>;
csi_out0: endpoint@1 {
status = "disabled";
};
};
};
};
csi_chan1: channel@1 {
reg = <1>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
csi_chan1_port0: port@0 {
status = "disabled";
reg = <0>;
csi_in1: endpoint@2 {
status = "disabled";
};
};
csi_chan1_port1: port@1 {
status = "disabled";
reg = <1>;
csi_out1: endpoint@3 {
status = "disabled";
};
};
};
};
csi_chan2: channel@2 {
reg = <2>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
csi_chan2_port0: port@0 {
status = "disabled";
reg = <0>;
csi_in2: endpoint@4 {
status = "disabled";
};
};
csi_chan2_port1: port@1 {
status = "disabled";
reg = <1>;
csi_out2: endpoint@5 {
status = "disabled";
};
};
};
};
csi_chan3: channel@3 {
reg = <3>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
csi_chan3_port0: port@0 {
status = "disabled";
reg = <0>;
csi_in3: endpoint@6 {
status = "disabled";
};
};
csi_chan3_port1: port@1 {
status = "disabled";
reg = <1>;
csi_out3: endpoint@7 {
status = "disabled";
};
};
};
};
csi_chan4: channel@4 {
reg = <4>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
csi_chan4_port0: port@0 {
status = "disabled";
reg = <0>;
csi_in4: endpoint@8 {
status = "disabled";
};
};
csi_chan4_port1: port@1 {
status = "disabled";
reg = <1>;
csi_out4: endpoint@9 {
status = "disabled";
};
};
};
};
csi_chan5: channel@5 {
reg = <5>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
csi_chan5_port0: port@0 {
status = "disabled";
reg = <0>;
csi_in5: endpoint@10 {
status = "disabled";
};
};
csi_chan5_port1: port@1 {
status = "disabled";
reg = <1>;
csi_out5: endpoint@11 {
status = "disabled";
};
};
};
};
};
};
i2c@3180000 {
e3326_cam0: ov5693_c@36 {
status = "disabled";
};
e3323_cam0: ov23850_a@10 {
status = "disabled";
};
e3323_vcm0: lc898212@72 {
status = "disabled";
};
tca6408@21 {
status = "disabled";
};
tca9548@77 {
status = "disabled";
i2c@0 {
e3333_cam0: ov5693_a@36 {
status = "disabled";
};
e3322_cam0: imx219_a@10 {
status = "disabled";
};
};
i2c@1 {
e3333_cam1: ov5693_b@36 {
status = "disabled";
};
e3322_cam1: imx219_b@10 {
status = "disabled";
};
};
i2c@2 {
e3333_cam2: ov5693_c@36 {
status = "disabled";
};
e3322_cam2: imx219_c@10 {
status = "disabled";
};
};
i2c@3 {
e3333_cam3: ov5693_d@36 {
status = "disabled";
};
e3322_cam3: imx219_d@10 {
status = "disabled";
};
};
i2c@4 {
e3333_cam4: ov5693_e@36 {
status = "disabled";
};
e3322_cam4: imx219_e@10 {
status = "disabled";
};
};
i2c@5 {
e3333_cam5: ov5693_f@36 {
status = "disabled";
};
e3322_cam5: imx219_f@10 {
status = "disabled";
};
};
};
tca9546_70: tca9546@70 {
status = "disabled";
i2c@0 {
imx185_cam0: imx185_a@1a {
status = "disabled";
};
};
};
tca9546_70: tca9546@70 {
status = "disabled";
i2c@0 {
imx274_cam0: imx274_a@1a {
status = "disabled";
};
};
};
};
i2c@c240000 {
e3323_cam1: ov23850_c@36 {
status = "disabled";
};
e3323_vcm1: lc898212@72 {
status = "disabled";
};
};
tcp: tegra-camera-platform {
compatible = "nvidia, tegra-camera-platform";
modules {
cam_module0: module0 {
status = "disabled";
cam_module0_drivernode0: drivernode0 {
status = "disabled";
};
cam_module0_drivernode1: drivernode1 {
status = "disabled";
pcl_id = "v4l2_lens";
};
};
cam_module1: module1 {
status = "disabled";
cam_module1_drivernode0: drivernode0 {
status = "disabled";
};
cam_module1_drivernode1: drivernode1 {
status = "disabled";
pcl_id = "v4l2_lens";
};
};
cam_module2: module2 {
status = "disabled";
cam_module2_drivernode0: drivernode0 {
status = "disabled";
};
cam_module2_drivernode1: drivernode1 {
status = "disabled";
pcl_id = "v4l2_lens";
};
};
cam_module3: module3 {
status = "disabled";
cam_module3_drivernode0: drivernode0 {
status = "disabled";
};
cam_module3_drivernode1: drivernode1 {
status = "disabled";
pcl_id = "v4l2_lens";
};
};
cam_module4: module4 {
status = "disabled";
cam_module4_drivernode0: drivernode0 {
status = "disabled";
};
cam_module4_drivernode1: drivernode1 {
status = "disabled";
pcl_id = "v4l2_lens";
};
};
cam_module5: module5 {
status = "disabled";
cam_module5_drivernode0: drivernode0 {
status = "disabled";
};
cam_module5_drivernode1: drivernode1 {
status = "disabled";
pcl_id = "v4l2_lens";
};
};
};
};
};

View File

@ -0,0 +1,347 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <t18x-common-platforms/tegra186-tx2-spiri-camera-base.dtsi>
#include "dt-bindings/clock/tegra186-clock.h"
#define CAM0_RST TEGRA_MAIN_GPIO(R, 5)
#define CAM1_RST TEGRA_MAIN_GPIO(R, 1)
#define CAM0_PWDN TEGRA_MAIN_GPIO(R, 0)
#define CAM1_PWDN TEGRA_MAIN_GPIO(N, 2)
/*
I2C Busses:
i2c0 = "/i2c@3160000";
i2c1 = "/i2c@c240000";
i2c2 = "/i2c@3180000";
i2c3 = "/i2c@3190000";
i2c4 = "/i2c@31a0000";
i2c5 = "/i2c@31b0000";
i2c6 = "/i2c@31c0000";
i2c7 = "/i2c@c250000";
i2c8 = "/i2c@31e0000";
*/
/ {
gpio@2200000 {
camera-control-output-low {
gpio-hog;
output-low;
gpios = <CAM0_RST 0 CAM0_PWDN 0 CAM1_RST 0 CAM1_PWDN 0>;
label = "cam0-rst", "cam0-pwdn, cam1-rst, cam1-pwdn";
status = "okay";
};
};
i2c@c240000 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
mt9m021_b@10 {
compatible = "nvidia,mt9m021";
/* I2C device address */
reg = <0x10>;
/* Physical dimensions of sensor */
physical_w = "10";
physical_h = "10";
/* Sensor Model */
sensor_model ="mt9m021";
/* slave or master mode */
trigger_mode = "slave";
/* input clock for the device in MHz*/
clocks = <&tegra_car TEGRA186_CLK_EXTPERIPH2>,
<&tegra_car TEGRA186_CLK_PLLP_OUT0>;
clock-names = "extperiph2", "pllp_grtba";
clock-frequency = <24000000>;
mclk = "extperiph2";
/* gpios */
reset-gpios = <&tegra_main_gpio CAM1_RST GPIO_ACTIVE_HIGH>;
mode0 {
mclk_khz = "24000";
num_lanes = "1";
tegra_sinterface = "serial_b";
discontinuous_clk = "no";
dpcm_enable = "false";
cil_settletime = "26";
active_w = "1280";
active_h = "720";
dynamic_pixel_bit_depth = "12";
csi_pixel_bit_depth = "12";
mode_type = "bayer";
pixel_phase = "rggb";
readout_orientation = "0";
line_length = "1650";
inherent_gain = "1";
pix_clk_hz = "74250000";
gain_factor = "1";
framerate_factor = "1000000";
exposure_factor = "1000000";
min_gain_val = "4";
max_gain_val = "6476";
step_gain_val = "1";
default_gain = "100";
min_hdr_ratio = "1";
max_hdr_ratio = "1";
min_framerate = "2000000";
max_framerate = "60000000";
step_framerate = "1";
default_framerate = "6000000"; /* 60.0 fps */
min_exp_time = "23"; /* us */
max_exp_time = "14933"; /* us */
step_exp_time = "1";
default_exp_time = "10000"; /* us */
};
ports {
#address-cells = <0x1>;
#size-cells = <0x0>;
port@0 {
reg = <0x0>;
mt9m021_slave: endpoint {
port-index = <0x1>;
bus-width = <0x1>;
remote-endpoint = <&mt9m021_slave_nvcsi_port0>;
};
};
};
};
};
i2c@3180000 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
mt9m021_a@10 {
compatible = "nvidia,mt9m021";
/* I2C device address */
reg = <0x10>;
/* Physical dimensions of sensor */
physical_w = "10";
physical_h = "10";
/* Sensor Model */
sensor_model ="mt9m021";
/* slave or master mode */
trigger_mode = "master";
/* input clock for the device in MHz*/
clocks = <&tegra_car TEGRA186_CLK_EXTPERIPH1>,
<&tegra_car TEGRA186_CLK_PLLP_OUT0>;
clock-names = "extperiph1", "pllp_grtba";
clock-frequency = <24000000>;
mclk = "extperiph1";
/* gpios */
reset-gpios = <&tegra_main_gpio CAM0_RST GPIO_ACTIVE_HIGH>;
mode0 {
mclk_khz = "24000";
num_lanes = "1";
tegra_sinterface = "serial_a";
discontinuous_clk = "no";
dpcm_enable = "false";
cil_settletime = "26";
active_w = "1280";
active_h = "720";
dynamic_pixel_bit_depth = "12";
csi_pixel_bit_depth = "12";
mode_type = "bayer";
pixel_phase = "rggb";
readout_orientation = "0";
line_length = "1650";
inherent_gain = "1";
pix_clk_hz = "74250000";
gain_factor = "1";
framerate_factor = "1000000";
exposure_factor = "1000000";
min_gain_val = "4";
max_gain_val = "6476";
step_gain_val = "1";
default_gain = "100";
min_hdr_ratio = "1";
max_hdr_ratio = "1";
min_framerate = "2000000";
max_framerate = "60000000";
step_framerate = "1";
default_framerate = "6000000"; /* 60.0 fps */
min_exp_time = "23"; /* us */
max_exp_time = "14933"; /* us */
step_exp_time = "1";
default_exp_time = "10000"; /* us */
};
ports {
#address-cells = <0x1>;
#size-cells = <0x0>;
port@0 {
reg = <0x0>;
mt9m021_master: endpoint {
port-index = <0x0>;
bus-width = <0x1>;
remote-endpoint = <&mt9m021_master_nvcsi_port0>;
};
};
};
};
};
host1x {
vi@15700000 {
num-channels = <0x2>;
ports {
#address-cells = <0x1>;
#size-cells = <0x0>;
port@0 {
reg = <0x0>;
status = "okay";
mt9m021_master_vi: endpoint {
status = "okay";
port-index = <0x0>;
bus-width = <0x1>;
remote-endpoint = <&mt9m021_master_nvcsi_port1>;
};
};
port@1 {
reg = <0x1>;
status = "okay";
mt9m021_slave_vi: endpoint {
status = "okay";
port-index = <0x1>;
bus-width = <0x1>;
remote-endpoint = <&mt9m021_slave_nvcsi_port1>;
};
};
};
};
nvcsi@150c0000 {
status = "okay";
num-channels = <0x2>;
#address-cells = <0x1>;
#size-cells = <0x0>;
channel@0 {
status = "okay";
reg = <0x0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
status = "okay";
reg = <0x0>;
mt9m021_master_nvcsi_port0: endpoint@0 {
status = "okay";
port-index = <0x0>;
bus-width = <0x1>;
remote-endpoint = <&mt9m021_master>;
};
};
port@1 {
status = "okay";
reg = <0x1>;
mt9m021_master_nvcsi_port1: endpoint@1 {
status = "okay";
remote-endpoint = <&mt9m021_master_vi>;
};
};
};
};
channel@1 {
status = "okay";
reg = <0x1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
status = "okay";
reg = <0x0>;
mt9m021_slave_nvcsi_port0: endpoint@2 {
status = "okay";
port-index = <0x1>;
bus-width = <0x1>;
remote-endpoint = <&mt9m021_slave>;
};
};
port@1 {
status = "okay";
reg = <0x1>;
mt9m021_slave_nvcsi_port1: endpoint@3 {
status = "okay";
remote-endpoint = <&mt9m021_slave_vi>;
};
};
};
};
};
};
tegra-camera-platform {
compatible = "nvidia, tegra-camera-platform";
status = "okay";
num_csi_lanes = <1>;
max_lane_speed = <1500000>;
min_bits_per_pixel = <12>;
vi_peak_byte_per_pixel = <2>;
vi_bw_margin_pct = <25>;
max_pixel_rate = <160000>;
isp_peak_byte_per_pixel = <5>;
isp_bw_margin_pct = <25>;
modules {
module0 {
status = "okay";
badge = "mt9m021_slave";
position = "rear";
orientation = "1";
drivernode0 {
status = "okay";
pcl_id = "v4l2_sensor";
devname = "mt9m021 1-0010";
proc-device-tree = "/proc/device-tree/i2c@c240000/mt9m021_b@10";
};
};
module1 {
status = "okay";
badge = "mt9m021_master";
position = "front";
orientation = "1";
drivernode0 {
status = "okay";
pcl_id = "v4l2_sensor";
devname = "mt9m021 2-0010";
proc-device-tree = "/proc/device-tree/i2c@3180000/mt9m021_a@10";
};
};
};
};
};

View File

@ -0,0 +1,22 @@
old-dtb := $(dtb-y)
old-dtbo := $(dtbo-y)
dtb-y :=
dtbo-y :=
makefile-path := platform/t18x/quill/kernel-dts
dtb-$(CONFIG_ARCH_TEGRA_18x_SOC) += tegra186-tx2-spiri-mPCIe.dtb
dtb-$(CONFIG_ARCH_TEGRA_18x_SOC) += tegra186-tx2-spiri-revF+.dtb
dtb-$(CONFIG_ARCH_TEGRA_18x_SOC) += tegra186-tx2-spiri-USB3.dtb
ifneq ($(dtb-y),)
dtb-y := $(addprefix $(makefile-path)/,$(dtb-y))
dtbo-y := $(addprefix $(makefile-path)/,$(dtbo-y))
dts-include += $(makefile-path)
ifneq ($(dtbo-y),)
dtbo-y := $(addprefix $(makefile-path)/,$(dtbo-y))
endif
endif
#dtb-y += $(old-dtb)
#dtbo-y += $(old-dtbo)

View File

@ -0,0 +1,133 @@
#include <tegra186-tx2-spiri-base.dts>
#include <t18x-common-platforms/tegra186-tx2-spiri-camera-base.dtsi>
/{
nvidia,dtsfilename = "tegra186-tx2-spiri-USB3.dts";
gpio@2200000 {
/*enable this to enabled PCIe Controller #2*/
pcie0_lane2_mux {
status = "disable";
};
/******************************************/
/*enable these two to enable USB3 Port 0*/
e3325_sdio_rst {
status = "okay";
};
e3325_lane0_mux {
status = "okay";
};
/******************************************/
};
xhci@3530000 {
status = "okay";
phys = <&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-1}>,
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-2}>,
<&{/xusb_padctl@3520000/pads/usb3/lanes/usb3-0}>;
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
};
xusb_padctl@3520000 {
pads {
usb2 {
lanes {
usb2-0 {
status = "okay";
};
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
};
};
usb3 {
lanes {
usb3-0 {
status = "okay";
};
usb3-1 {
status = "disabled";
};
usb3-2 {
status = "disabled";
};
};
};
};
ports {
usb2-0 {
status = "okay";
};
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
usb3-0 {
nvidia,usb2-companion = <1>;
status = "okay";
};
usb3-1 {
nvidia,usb2-companion = <0>;
status = "disabled";
};
usb3-2 {
nvidia,usb2-companion = <2>;
status = "disabled";
};
};
};
pinctrl@3520000 {
status = "okay";
pinmux {
usb2-port0 {
status = "okay";
};
usb2-port1 {
status = "okay";
};
usb2-port2 {
status = "okay";
};
usb3-port0 {
status = "okay";
};
usb3-port1 {
status = "disabled";
};
usb3-port2 {
status = "disabled";
};
};
};
pcie-controller@10003000 {
pci@1,0 {
nvidia,num-lanes = <1>;
status = "okay";
};
pci@2,0 {
nvidia,num-lanes = <0>;
status = "disabled";
};
pci@3,0 {
nvidia,num-lanes = <1>;
status = "okay";
};
};
};

View File

@ -0,0 +1,267 @@
#include <t18x-common-platforms/tegra186-quill-common-p3310-1000-a00.dtsi>
//#include <t18x-common-platforms/tegra186-quill-power-tree-p3310-1000-a00-00.dtsi>
#include <t18x-common-platforms/tegra186-tx2-cti-power-tree.dtsi>
//#include <t18x-common-platforms/tegra186-quill-camera-modules.dtsi>
#include <t18x-common-modules/tegra186-display-e3320-1000-a00.dtsi>
/* comms dtsi file should be included after gpio dtsi file */
#include <t18x-common-platforms/tegra186-quill-comms.dtsi>
#include <t18x-common-plugin-manager/tegra186-tx2-cti-plugin-manager.dtsi>
#include <t18x-common-modules/tegra186-super-module-e2614-p2597-1000-a00.dtsi>
#include <t18x-common-plugin-manager/tegra186-quill-display-plugin-manager.dtsi>
#include <t18x-common-prod/tegra186-priv-quill-p3310-1000-a00-prod.dtsi>
//#include <t18x-common-plugin-manager/tegra186-quill-camera-plugin-manager.dtsi>
#include "tegra186-tx2-cti-usb-pcie-base.dtsi"
/ {
model = "quill";
compatible = "nvidia,quill", "nvidia,tegra186";
nvidia,boardids = "3310:0000:C03";
nvidia,proc-boardid = "3310:0000:C03";
nvidia,dtsfilename = __FILE__;
nvidia,dtbbuildtime = __DATE__, __TIME__;
nvidia,fastboot-usb-vid = <0x0955>;
nvidia,fastboot-usb-pid = <0xee16>;
chosen {
board-has-eeprom;
stdout-path = &uarta;
bootargs ="root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 androidboot.serialno=0320817068659 bl_prof_dataptr=0x10000@0x277240000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4";
plugin-manager {
odm-data {
l4t;
};
};
bootloader {
nvidia,skip-display-init;
};
};
firmware {
android {
compatible = "android,firmware";
hardware = "quill";
vbmeta {
compatible = "android,vbmeta";
parts = "vbmeta,kernel,kernel-dtb,kernel-dtbo,APP,vendor,SOS";
};
fstab {
compatible = "android,fstab";
vendor {
compatible = "android,vendor";
dev = "/dev/block/platform/3460000.sdhci/by-name/vendor";
type = "ext4";
mnt_flags = "ro";
fsmgr_flags = "wait,avb";
};
odm {
compatible = "android,odm";
dev = "/dev/block/platform/3460000.sdhci/by-name/odm";
type = "ext4";
mnt_flags = "ro";
fsmgr_flags = "wait,avb";
};
};
};
};
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x70000000>;
};
i2c@3160000 {
/*
gpio@74{
status = "disabled";
};
*/
/*
gpio@77{
status = "disabled";
};
*/
lp8557-backlight-s-wuxga-8-0@2c {
status = "disabled";
};
};
i2c@c240000 {
clock-frequency = <400000>;
};
cpus {
status = "disabled";
};
host1x {
sor {
status = "disabled";
dp-display {
status = "disabled";
};
hdmi-display {
status = "disabled";
};
panel-s-edp-uhdtv-15-6 {
smartdimmer {
status = "disabled";
};
};
};
dpaux@155c0000 {
status = "disabled";
};
sor1 {
status = "okay";
nvidia,active-panel = <&sor1_hdmi_display>;
hdmi-display {
status = "okay";
};
dp-display {
status = "disabled";
};
};
nvdisplay@15200000 {
status = "disabled";
};
nvdisplay@15220000 {
status = "disabled";
};
};
pinmux@2430000 {
common {
gpio_edp2_pp5 {
status = "okay";
};
gpio_edp3_pp6 {
status = "okay";
};
};
};
gpio@2200000 {
sdmmc-wake-support-input {
status = "okay";
};
sdmmc-wake-support-output {
status = "okay";
};
};
sdhci@3400000 {
cd-gpios = <&tegra_main_gpio TEGRA_MAIN_GPIO(P, 5) 0>;
nvidia,cd-wakeup-capable;
};
/* i2c@3160000 {
/delete-node/ ina3221x@40;
/delete-node/ ina3221x@41;
};*/
i2c@c240000 {
bmi160@69 {
compatible = "bmi,bmi160";
reg = <0x69>;
interrupt-parent = <&tegra_aon_gpio>;
interrupts = <TEGRA_AON_GPIO(AA, 2) 0x01>;
accelerometer_matrix = [01 00 00 00 01 00 00 00 01];
gyroscope_matrix = [01 00 00 00 01 00 00 00 01];
accelerometer_delay_us_min = <1250>;
gyroscope_delay_us_min = <1250>;
vdd-supply = <&spmic_sd3>;
vdd_IO-supply = <&spmic_sd3>;
status = "disabled";
};
};
mttcan@c310000 {
status = "disabled";
gpio_can_stb = <&tegra_aon_gpio TEGRA_AON_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
gpio_can_en = <&tegra_aon_gpio TEGRA_AON_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
};
mttcan@c320000 {
status = "disabled";
gpio_can_stb = <&tegra_aon_gpio TEGRA_AON_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
gpio_can_en = <&tegra_aon_gpio TEGRA_AON_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
};
ahci-sata@3507000 {
gpios = <&spmic 7 0>;
};
bluedroid_pm {
bluedroid_pm,reset-gpio = <&tegra_main_gpio TEGRA_MAIN_GPIO(H, 5) 0>;
};
fixed-regulators {
regulator@1 {
gpio = <&tegra_main_gpio TEGRA_MAIN_GPIO(P, 6) 0>;
};
};
bpmp_i2c {
spmic@3c {
pinmux@0 {
pin_gpio2 {
status = "disabled";
};
pin_gpio3 {
status = "disabled";
};
pin_gpio7 {
drive-push-pull = <1>;
};
};
regulators {
ldo0 {
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
};
ldo6 {
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
regulator-boot-on;
regulator-always-on;
};
ldo7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo8 {
regulator-name = "dvdd-pex";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
};
};
};
#if LINUX_VERSION >= 414
#include <tegra186-linux-4.14.dtsi>
#endif

View File

@ -0,0 +1,133 @@
#include <tegra186-tx2-spiri-base.dts>
#include <t18x-common-platforms/tegra186-tx2-spiri-camera-base.dtsi>
/{
nvidia,dtsfilename = "tegra186-tx2-spiri-mPCIe.dts";
gpio@2200000 {
/*enable this to enabled PCIe Controller #2*/
pcie0_lane2_mux {
status = "okay";
};
/******************************************/
/*enable these two to enable USB3 Port 0*/
e3325_sdio_rst {
status = "disabled";
};
e3325_lane0_mux {
status = "disabled";
};
/******************************************/
};
xhci@3530000 {
status = "okay";
phys = <&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-1}>,
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-2}>,
<&{/xusb_padctl@3520000/pads/usb3/lanes/usb3-1}>;
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-1";
};
xusb_padctl@3520000 {
pads {
usb2 {
lanes {
usb2-0 {
status = "okay";
};
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
};
};
usb3 {
lanes {
usb3-0 {
status = "disabled";
};
usb3-1 {
status = "okay";
};
usb3-2 {
status = "disabled";
};
};
};
};
ports {
usb2-0 {
status = "okay";
};
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
usb3-0 {
nvidia,usb2-companion = <0>;
status = "disabled";
};
usb3-1 {
nvidia,usb2-companion = <1>;
status = "okay";
};
usb3-2 {
nvidia,usb2-companion = <2>;
status = "disabled";
};
};
};
pinctrl@3520000 {
status = "okay";
pinmux {
usb2-port0 {
status = "okay";
};
usb2-port1 {
status = "okay";
};
usb2-port2 {
status = "okay";
};
usb3-port0 {
status = "disabled";
};
usb3-port1 {
status = "okay";
};
usb3-port2 {
status = "disabled";
};
};
};
pcie-controller@10003000 {
pci@1,0 {
nvidia,num-lanes = <1>;
status = "okay";
};
pci@2,0 {
nvidia,num-lanes = <0>;
status = "disabled";
};
pci@3,0 {
nvidia,num-lanes = <1>;
status = "okay";
};
};
};

View File

@ -0,0 +1,133 @@
#include <tegra186-tx2-spiri-base.dts>
#include <t18x-common-platforms/tegra186-tx2-spiri-camera.dtsi>
/{
nvidia,dtsfilename = "tegra186-tx2-spiri-revF+.dts";
gpio@2200000 {
/*enable this to enabled PCIe Controller #2*/
pcie0_lane2_mux {
status = "okay";
};
/******************************************/
/*enable these two to enable USB3 Port 0*/
e3325_sdio_rst {
status = "disabled";
};
e3325_lane0_mux {
status = "disabled";
};
/******************************************/
};
xhci@3530000 {
status = "okay";
phys = <&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-1}>,
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-2}>,
<&{/xusb_padctl@3520000/pads/usb3/lanes/usb3-1}>;
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-1";
};
xusb_padctl@3520000 {
pads {
usb2 {
lanes {
usb2-0 {
status = "okay";
};
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
};
};
usb3 {
lanes {
usb3-0 {
status = "disabled";
};
usb3-1 {
status = "okay";
};
usb3-2 {
status = "disabled";
};
};
};
};
ports {
usb2-0 {
status = "okay";
};
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
usb3-0 {
nvidia,usb2-companion = <0>;
status = "disabled";
};
usb3-1 {
nvidia,usb2-companion = <1>;
status = "okay";
};
usb3-2 {
nvidia,usb2-companion = <2>;
status = "disabled";
};
};
};
pinctrl@3520000 {
status = "okay";
pinmux {
usb2-port0 {
status = "okay";
};
usb2-port1 {
status = "okay";
};
usb2-port2 {
status = "okay";
};
usb3-port0 {
status = "disabled";
};
usb3-port1 {
status = "okay";
};
usb3-port2 {
status = "disabled";
};
};
};
pcie-controller@10003000 {
pci@1,0 {
nvidia,num-lanes = <2>;
status = "okay";
};
pci@2,0 {
nvidia,num-lanes = <1>;
status = "okay";
};
pci@3,0 {
nvidia,num-lanes = <1>;
status = "okay";
};
};
};