forked from rrcarlosr/Jetpack
473 lines
11 KiB
C
473 lines
11 KiB
C
/*
|
|
* (C) Copyright 2009 Reinhard Arlt, reinhard.arlt@esd-electronics.com
|
|
*
|
|
* base on universe.h by
|
|
*
|
|
* (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
|
|
#include <tsi148.h>
|
|
|
|
#define LPCI_VENDOR PCI_VENDOR_ID_TUNDRA
|
|
#define LPCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148
|
|
|
|
typedef struct _TSI148_DEV TSI148_DEV;
|
|
|
|
struct _TSI148_DEV {
|
|
int bus;
|
|
pci_dev_t busdevfn;
|
|
TSI148 *uregs;
|
|
unsigned int pci_bs;
|
|
};
|
|
|
|
static TSI148_DEV *dev;
|
|
|
|
/*
|
|
* Most of the TSI148 register are BIGENDIAN
|
|
* This is the reason for the __raw_writel(htonl(x), x) usage!
|
|
*/
|
|
|
|
int tsi148_init(void)
|
|
{
|
|
int j, result;
|
|
pci_dev_t busdevfn;
|
|
unsigned int val;
|
|
|
|
busdevfn = pci_find_device(LPCI_VENDOR, LPCI_DEVICE, 0);
|
|
if (busdevfn == -1) {
|
|
puts("Tsi148: No Tundra Tsi148 found!\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Lets turn Latency off */
|
|
pci_write_config_dword(busdevfn, 0x0c, 0);
|
|
|
|
dev = malloc(sizeof(*dev));
|
|
if (NULL == dev) {
|
|
puts("Tsi148: No memory!\n");
|
|
return -1;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
dev->busdevfn = busdevfn;
|
|
|
|
pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
|
|
val &= ~0xf;
|
|
dev->uregs = (TSI148 *)val;
|
|
|
|
debug("Tsi148: Base : %p\n", dev->uregs);
|
|
|
|
/* check mapping */
|
|
debug("Tsi148: Read via mapping, PCI_ID = %08X\n",
|
|
readl(&dev->uregs->pci_id));
|
|
if (((LPCI_DEVICE << 16) | LPCI_VENDOR) != readl(&dev->uregs->pci_id)) {
|
|
printf("Tsi148: Cannot read PCI-ID via Mapping: %08x\n",
|
|
readl(&dev->uregs->pci_id));
|
|
result = -1;
|
|
goto break_30;
|
|
}
|
|
|
|
debug("Tsi148: PCI_BS = %08X\n", readl(&dev->uregs->pci_mbarl));
|
|
|
|
dev->pci_bs = readl(&dev->uregs->pci_mbarl);
|
|
|
|
/* turn off windows */
|
|
for (j = 0; j < 8; j++) {
|
|
__raw_writel(htonl(0x00000000), &dev->uregs->outbound[j].otat);
|
|
__raw_writel(htonl(0x00000000), &dev->uregs->inbound[j].itat);
|
|
}
|
|
|
|
/* Tsi148 VME timeout etc */
|
|
__raw_writel(htonl(0x00000084), &dev->uregs->vctrl);
|
|
|
|
#ifdef DEBUG
|
|
if ((__raw_readl(&dev->uregs->vstat) & 0x00000100) != 0)
|
|
printf("Tsi148: System Controller!\n");
|
|
else
|
|
printf("Tsi148: Not System Controller!\n");
|
|
#endif
|
|
|
|
/*
|
|
* Lets turn off interrupts
|
|
*/
|
|
/* Disable interrupts in Tsi148 first */
|
|
__raw_writel(htonl(0x00000000), &dev->uregs->inten);
|
|
/* Disable interrupt out */
|
|
__raw_writel(htonl(0x00000000), &dev->uregs->inteo);
|
|
eieio();
|
|
/* Reset all IRQ's */
|
|
__raw_writel(htonl(0x03ff3f00), &dev->uregs->intc);
|
|
/* Map all ints to 0 */
|
|
__raw_writel(htonl(0x00000000), &dev->uregs->intm1);
|
|
__raw_writel(htonl(0x00000000), &dev->uregs->intm2);
|
|
eieio();
|
|
|
|
val = __raw_readl(&dev->uregs->vstat);
|
|
val &= ~(0x00004000);
|
|
__raw_writel(val, &dev->uregs->vstat);
|
|
eieio();
|
|
|
|
debug("Tsi148: register struct size %08x\n", sizeof(TSI148));
|
|
|
|
return 0;
|
|
|
|
break_30:
|
|
free(dev);
|
|
dev = NULL;
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Create pci slave window (access: pci -> vme)
|
|
*/
|
|
int tsi148_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr,
|
|
int size, int vam, int vdw)
|
|
{
|
|
int result, i;
|
|
unsigned int ctl = 0;
|
|
|
|
if (NULL == dev) {
|
|
result = -1;
|
|
goto exit_10;
|
|
}
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (0x00000000 == readl(&dev->uregs->outbound[i].otat))
|
|
break;
|
|
}
|
|
|
|
if (i > 7) {
|
|
printf("Tsi148: No Image available\n");
|
|
result = -1;
|
|
goto exit_10;
|
|
}
|
|
|
|
debug("Tsi148: Using image %d\n", i);
|
|
|
|
printf("Tsi148: Pci addr %08x\n", pciAddr);
|
|
|
|
__raw_writel(htonl(pciAddr), &dev->uregs->outbound[i].otsal);
|
|
__raw_writel(0x00000000, &dev->uregs->outbound[i].otsau);
|
|
__raw_writel(htonl(pciAddr + size), &dev->uregs->outbound[i].oteal);
|
|
__raw_writel(0x00000000, &dev->uregs->outbound[i].oteau);
|
|
__raw_writel(htonl(vmeAddr - pciAddr), &dev->uregs->outbound[i].otofl);
|
|
__raw_writel(0x00000000, &dev->uregs->outbound[i].otofu);
|
|
|
|
switch (vam & VME_AM_Axx) {
|
|
case VME_AM_A16:
|
|
ctl = 0x00000000;
|
|
break;
|
|
case VME_AM_A24:
|
|
ctl = 0x00000001;
|
|
break;
|
|
case VME_AM_A32:
|
|
ctl = 0x00000002;
|
|
break;
|
|
}
|
|
|
|
switch (vam & VME_AM_Mxx) {
|
|
case VME_AM_DATA:
|
|
ctl |= 0x00000000;
|
|
break;
|
|
case VME_AM_PROG:
|
|
ctl |= 0x00000010;
|
|
break;
|
|
}
|
|
|
|
if (vam & VME_AM_SUP)
|
|
ctl |= 0x00000020;
|
|
|
|
switch (vdw & VME_FLAG_Dxx) {
|
|
case VME_FLAG_D16:
|
|
ctl |= 0x00000000;
|
|
break;
|
|
case VME_FLAG_D32:
|
|
ctl |= 0x00000040;
|
|
break;
|
|
}
|
|
|
|
ctl |= 0x80040000; /* enable, no prefetch */
|
|
|
|
__raw_writel(htonl(ctl), &dev->uregs->outbound[i].otat);
|
|
|
|
debug("Tsi148: window-addr =%p\n",
|
|
&dev->uregs->outbound[i].otsau);
|
|
debug("Tsi148: pci slave window[%d] attr =%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->outbound[i].otat)));
|
|
debug("Tsi148: pci slave window[%d] start =%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->outbound[i].otsal)));
|
|
debug("Tsi148: pci slave window[%d] end =%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->outbound[i].oteal)));
|
|
debug("Tsi148: pci slave window[%d] offset=%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->outbound[i].otofl)));
|
|
|
|
return 0;
|
|
|
|
exit_10:
|
|
return -result;
|
|
}
|
|
|
|
unsigned int tsi148_eval_vam(int vam)
|
|
{
|
|
unsigned int ctl = 0;
|
|
|
|
switch (vam & VME_AM_Axx) {
|
|
case VME_AM_A16:
|
|
ctl = 0x00000000;
|
|
break;
|
|
case VME_AM_A24:
|
|
ctl = 0x00000010;
|
|
break;
|
|
case VME_AM_A32:
|
|
ctl = 0x00000020;
|
|
break;
|
|
}
|
|
switch (vam & VME_AM_Mxx) {
|
|
case VME_AM_DATA:
|
|
ctl |= 0x00000001;
|
|
break;
|
|
case VME_AM_PROG:
|
|
ctl |= 0x00000002;
|
|
break;
|
|
case (VME_AM_PROG | VME_AM_DATA):
|
|
ctl |= 0x00000003;
|
|
break;
|
|
}
|
|
|
|
if (vam & VME_AM_SUP)
|
|
ctl |= 0x00000008;
|
|
if (vam & VME_AM_USR)
|
|
ctl |= 0x00000004;
|
|
|
|
return ctl;
|
|
}
|
|
|
|
/*
|
|
* Create vme slave window (access: vme -> pci)
|
|
*/
|
|
int tsi148_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr,
|
|
int size, int vam)
|
|
{
|
|
int result, i;
|
|
unsigned int ctl = 0;
|
|
|
|
if (NULL == dev) {
|
|
result = -1;
|
|
goto exit_10;
|
|
}
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (0x00000000 == readl(&dev->uregs->inbound[i].itat))
|
|
break;
|
|
}
|
|
|
|
if (i > 7) {
|
|
printf("Tsi148: No Image available\n");
|
|
result = -1;
|
|
goto exit_10;
|
|
}
|
|
|
|
debug("Tsi148: Using image %d\n", i);
|
|
|
|
__raw_writel(htonl(vmeAddr), &dev->uregs->inbound[i].itsal);
|
|
__raw_writel(0x00000000, &dev->uregs->inbound[i].itsau);
|
|
__raw_writel(htonl(vmeAddr + size), &dev->uregs->inbound[i].iteal);
|
|
__raw_writel(0x00000000, &dev->uregs->inbound[i].iteau);
|
|
__raw_writel(htonl(pciAddr - vmeAddr), &dev->uregs->inbound[i].itofl);
|
|
if (vmeAddr > pciAddr)
|
|
__raw_writel(0xffffffff, &dev->uregs->inbound[i].itofu);
|
|
else
|
|
__raw_writel(0x00000000, &dev->uregs->inbound[i].itofu);
|
|
|
|
ctl = tsi148_eval_vam(vam);
|
|
ctl |= 0x80000000; /* enable */
|
|
__raw_writel(htonl(ctl), &dev->uregs->inbound[i].itat);
|
|
|
|
debug("Tsi148: window-addr =%p\n",
|
|
&dev->uregs->inbound[i].itsau);
|
|
debug("Tsi148: vme slave window[%d] attr =%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->inbound[i].itat)));
|
|
debug("Tsi148: vme slave window[%d] start =%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->inbound[i].itsal)));
|
|
debug("Tsi148: vme slave window[%d] end =%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->inbound[i].iteal)));
|
|
debug("Tsi148: vme slave window[%d] offset=%08x\n",
|
|
i, ntohl(__raw_readl(&dev->uregs->inbound[i].itofl)));
|
|
|
|
return 0;
|
|
|
|
exit_10:
|
|
return -result;
|
|
}
|
|
|
|
/*
|
|
* Create vme slave window (access: vme -> gcsr)
|
|
*/
|
|
int tsi148_vme_gcsr_window(unsigned int vmeAddr, int vam)
|
|
{
|
|
int result;
|
|
unsigned int ctl;
|
|
|
|
result = 0;
|
|
|
|
if (NULL == dev) {
|
|
result = 1;
|
|
} else {
|
|
__raw_writel(htonl(vmeAddr), &dev->uregs->gbal);
|
|
__raw_writel(0x00000000, &dev->uregs->gbau);
|
|
|
|
ctl = tsi148_eval_vam(vam);
|
|
ctl |= 0x00000080; /* enable */
|
|
__raw_writel(htonl(ctl), &dev->uregs->gcsrat);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Create vme slave window (access: vme -> crcsr)
|
|
*/
|
|
int tsi148_vme_crcsr_window(unsigned int vmeAddr)
|
|
{
|
|
int result;
|
|
unsigned int ctl;
|
|
|
|
result = 0;
|
|
|
|
if (NULL == dev) {
|
|
result = 1;
|
|
} else {
|
|
__raw_writel(htonl(vmeAddr), &dev->uregs->crol);
|
|
__raw_writel(0x00000000, &dev->uregs->crou);
|
|
|
|
ctl = 0x00000080; /* enable */
|
|
__raw_writel(htonl(ctl), &dev->uregs->crat);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Create vme slave window (access: vme -> crg)
|
|
*/
|
|
int tsi148_vme_crg_window(unsigned int vmeAddr, int vam)
|
|
{
|
|
int result;
|
|
unsigned int ctl;
|
|
|
|
result = 0;
|
|
|
|
if (NULL == dev) {
|
|
result = 1;
|
|
} else {
|
|
__raw_writel(htonl(vmeAddr), &dev->uregs->cbal);
|
|
__raw_writel(0x00000000, &dev->uregs->cbau);
|
|
|
|
ctl = tsi148_eval_vam(vam);
|
|
ctl |= 0x00000080; /* enable */
|
|
__raw_writel(htonl(ctl), &dev->uregs->crgat);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Tundra Tsi148 configuration
|
|
*/
|
|
int do_tsi148(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, vdw = 0;
|
|
char cmd = 'x';
|
|
|
|
/* get parameter */
|
|
if (argc > 1)
|
|
cmd = argv[1][0];
|
|
if (argc > 2)
|
|
addr1 = simple_strtoul(argv[2], NULL, 16);
|
|
if (argc > 3)
|
|
addr2 = simple_strtoul(argv[3], NULL, 16);
|
|
if (argc > 4)
|
|
size = simple_strtoul(argv[4], NULL, 16);
|
|
if (argc > 5)
|
|
vam = simple_strtoul(argv[5], NULL, 16);
|
|
if (argc > 6)
|
|
vdw = simple_strtoul(argv[6], NULL, 16);
|
|
|
|
switch (cmd) {
|
|
case 'c':
|
|
if (strcmp(argv[1], "crg") == 0) {
|
|
vam = addr2;
|
|
printf("Tsi148: Configuring VME CRG Window "
|
|
"(VME->CRG):\n");
|
|
printf(" vme=%08lx vam=%02lx\n", addr1, vam);
|
|
tsi148_vme_crg_window(addr1, vam);
|
|
} else {
|
|
printf("Tsi148: Configuring VME CR/CSR Window "
|
|
"(VME->CR/CSR):\n");
|
|
printf(" pci=%08lx\n", addr1);
|
|
tsi148_vme_crcsr_window(addr1);
|
|
}
|
|
break;
|
|
case 'i': /* init */
|
|
tsi148_init();
|
|
break;
|
|
case 'g':
|
|
vam = addr2;
|
|
printf("Tsi148: Configuring VME GCSR Window (VME->GCSR):\n");
|
|
printf(" vme=%08lx vam=%02lx\n", addr1, vam);
|
|
tsi148_vme_gcsr_window(addr1, vam);
|
|
break;
|
|
case 'v': /* vme */
|
|
printf("Tsi148: Configuring VME Slave Window (VME->PCI):\n");
|
|
printf(" vme=%08lx pci=%08lx size=%08lx vam=%02lx\n",
|
|
addr1, addr2, size, vam);
|
|
tsi148_vme_slave_window(addr1, addr2, size, vam);
|
|
break;
|
|
case 'p': /* pci */
|
|
printf("Tsi148: Configuring PCI Slave Window (PCI->VME):\n");
|
|
printf(" pci=%08lx vme=%08lx size=%08lx vam=%02lx vdw=%02lx\n",
|
|
addr1, addr2, size, vam, vdw);
|
|
tsi148_pci_slave_window(addr1, addr2, size, vam, vdw);
|
|
break;
|
|
default:
|
|
printf("Tsi148: Command %s not supported!\n", argv[1]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
tsi148, 7, 1, do_tsi148,
|
|
"initialize and configure Turndra Tsi148\n",
|
|
"init\n"
|
|
" - initialize tsi148\n"
|
|
"tsi148 vme [vme_addr] [pci_addr] [size] [vam]\n"
|
|
" - create vme slave window (access: vme->pci)\n"
|
|
"tsi148 pci [pci_addr] [vme_addr] [size] [vam] [vdw]\n"
|
|
" - create pci slave window (access: pci->vme)\n"
|
|
"tsi148 crg [vme_addr] [vam]\n"
|
|
" - create vme slave window: (access vme->CRG\n"
|
|
"tsi148 crcsr [pci_addr]\n"
|
|
" - create vme slave window: (access vme->CR/CSR\n"
|
|
"tsi148 gcsr [vme_addr] [vam]\n"
|
|
" - create vme slave window: (access vme->GCSR\n"
|
|
" [vam] = VMEbus Address-Modifier: 01 -> A16 Address Space\n"
|
|
" 02 -> A24 Address Space\n"
|
|
" 03 -> A32 Address Space\n"
|
|
" 04 -> Usr AM Code\n"
|
|
" 08 -> Supervisor AM Code\n"
|
|
" 10 -> Data AM Code\n"
|
|
" 20 -> Program AM Code\n"
|
|
" [vdw] = VMEbus Maximum Datawidth: 02 -> D16 Data Width\n"
|
|
" 03 -> D32 Data Width\n"
|
|
);
|