forked from rrcarlosr/Jetpack
187 lines
4.5 KiB
Plaintext
187 lines
4.5 KiB
Plaintext
#include <tegra186-tx2i-cti-base.dts>
|
|
|
|
/{
|
|
nvidia,dtsfilename = "tegra186-tx2i-cti-ESG503-mPCIe.dts";
|
|
|
|
gpio@2200000 {
|
|
/*enable this to enabled PCIe Controller #2*/
|
|
pcie0_lane2_mux {
|
|
status = "okay";
|
|
};
|
|
/******************************************/
|
|
/*enable these two to enable USB3 Port 0*/
|
|
e3325_sdio_rst {
|
|
status = "disabled";
|
|
};
|
|
e3325_lane0_mux {
|
|
status = "disabled";
|
|
};
|
|
/******************************************/
|
|
|
|
};
|
|
i2c@3160000 {
|
|
|
|
gpio@74{
|
|
status = "disabled";
|
|
|
|
|
|
};
|
|
gpio@77{
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
i2c@c240000{
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio@74{
|
|
compatible = "ti,tca9539";
|
|
reg = <0x74>;
|
|
gpio-controller;
|
|
#gpio-cells = <0x2>;
|
|
vcc-supply = <&battery_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
};
|
|
spi@c260000 {
|
|
status = "okay";
|
|
/delete-node/ spi-touch-sharp19x12@0;
|
|
can@0 {
|
|
status = "okay";
|
|
compatible = "microchip,mcp2515";
|
|
reg = <0>;
|
|
clocks = <&can_clock>;
|
|
interrupt-parent = <&tegra_main_gpio>;
|
|
/* the first cell defines the
|
|
index of the interrupt within the controller, while the second cell is used
|
|
to specify any of the following flags:
|
|
- bits[3:0] trigger type and level flags
|
|
1 = low-to-high edge triggered
|
|
2 = high-to-low edge triggered
|
|
4 = active high level-sensitive
|
|
8 = active low level-sensitive
|
|
*/
|
|
interrupts = <TEGRA_MAIN_GPIO(I, 4) 0x2>;
|
|
vdd-supply = <&battery_reg>;
|
|
xceiver-supply = <&battery_reg>;
|
|
spi-max-frequency=<6375000>;
|
|
};
|
|
};
|
|
|
|
|
|
|
|
xhci@3530000 {
|
|
status = "okay";
|
|
phys = <&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-0}>,
|
|
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-1}>,
|
|
<&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-2}>,
|
|
<&{/xusb_padctl@3520000/pads/usb3/lanes/usb3-1}>,
|
|
<&{/xusb_padctl@3520000/pads/usb3/lanes/usb3-2}>;
|
|
phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-1", "usb3-2";
|
|
};
|
|
|
|
|
|
xusb_padctl@3520000 {
|
|
pads {
|
|
usb2 {
|
|
lanes {
|
|
usb2-0 {
|
|
status = "okay";
|
|
};
|
|
usb2-1 {
|
|
status = "okay";
|
|
};
|
|
usb2-2 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
usb3 {
|
|
lanes {
|
|
usb3-0 {
|
|
status = "disabled";
|
|
};
|
|
usb3-1 {
|
|
status = "okay";
|
|
};
|
|
usb3-2 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
ports {
|
|
usb2-0 {
|
|
status = "okay";
|
|
};
|
|
usb2-1 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb2-2 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3-0 {
|
|
nvidia,usb2-companion = <0>;
|
|
status = "disabled";
|
|
};
|
|
usb3-1 {
|
|
nvidia,usb2-companion = <1>;
|
|
status = "okay";
|
|
};
|
|
usb3-2 {
|
|
nvidia,usb2-companion = <2>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
pinctrl@3520000 {
|
|
status = "okay";
|
|
pinmux {
|
|
usb2-port0 {
|
|
status = "okay";
|
|
};
|
|
usb2-port1 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb2-port2 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3-port0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-port1 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3-port2 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
pcie-controller@10003000 {
|
|
pci@1,0 {
|
|
nvidia,num-lanes = <1>;
|
|
status = "okay";
|
|
};
|
|
pci@2,0 {
|
|
nvidia,num-lanes = <0>;
|
|
status = "disabled";
|
|
};
|
|
pci@3,0 {
|
|
nvidia,num-lanes = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
|
|
};
|