forked from rrcarlosr/Jetpack
309 lines
10 KiB
C
309 lines
10 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* m525xsim.h -- ColdFire 525x System Integration Module support.
|
|
*
|
|
* (C) Copyright 2012, Steven king <sfking@fdwdc.com>
|
|
* (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef m525xsim_h
|
|
#define m525xsim_h
|
|
/****************************************************************************/
|
|
|
|
/*
|
|
* This header supports ColdFire 5249, 5251 and 5253. There are a few
|
|
* little differences between them, but most of the peripheral support
|
|
* can be used by all of them.
|
|
*/
|
|
#define CPU_NAME "COLDFIRE(m525x)"
|
|
#define CPU_INSTR_PER_JIFFY 3
|
|
#define MCF_BUSCLK (MCF_CLK / 2)
|
|
|
|
#include <asm/m52xxacr.h>
|
|
|
|
/*
|
|
* The 525x has a second MBAR region, define its address.
|
|
*/
|
|
#define MCF_MBAR2 0x80000000
|
|
|
|
/*
|
|
* Define the 525x SIM register set addresses.
|
|
*/
|
|
#define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */
|
|
#define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */
|
|
#define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */
|
|
#define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog srv */
|
|
#define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */
|
|
#define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */
|
|
#define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */
|
|
#define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */
|
|
#define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */
|
|
#define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */
|
|
#define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */
|
|
#define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */
|
|
#define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */
|
|
#define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */
|
|
#define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */
|
|
#define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */
|
|
#define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */
|
|
#define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */
|
|
#define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */
|
|
|
|
#define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */
|
|
#define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */
|
|
#define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */
|
|
#define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */
|
|
#define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */
|
|
#define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */
|
|
#define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */
|
|
#define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */
|
|
#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */
|
|
#define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */
|
|
#define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */
|
|
#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */
|
|
#define MCFSIM_CSAR4 (MCF_MBAR + 0xb0) /* CS 4 Address reg */
|
|
#define MCFSIM_CSMR4 (MCF_MBAR + 0xb4) /* CS 4 Mask reg */
|
|
#define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */
|
|
|
|
#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */
|
|
#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */
|
|
#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */
|
|
#define MCFSIM_DACR1 (MCF_MBAR + 0x110) /* DRAM 1 Addr/Ctrl */
|
|
#define MCFSIM_DMR1 (MCF_MBAR + 0x114) /* DRAM 1 Mask */
|
|
|
|
/*
|
|
* Secondary Interrupt Controller (in MBAR2)
|
|
*/
|
|
#define MCFINTC2_INTBASE (MCF_MBAR2 + 0x168) /* Base Vector Reg */
|
|
#define MCFINTC2_INTPRI1 (MCF_MBAR2 + 0x140) /* 0-7 priority */
|
|
#define MCFINTC2_INTPRI2 (MCF_MBAR2 + 0x144) /* 8-15 priority */
|
|
#define MCFINTC2_INTPRI3 (MCF_MBAR2 + 0x148) /* 16-23 priority */
|
|
#define MCFINTC2_INTPRI4 (MCF_MBAR2 + 0x14c) /* 24-31 priority */
|
|
#define MCFINTC2_INTPRI5 (MCF_MBAR2 + 0x150) /* 32-39 priority */
|
|
#define MCFINTC2_INTPRI6 (MCF_MBAR2 + 0x154) /* 40-47 priority */
|
|
#define MCFINTC2_INTPRI7 (MCF_MBAR2 + 0x158) /* 48-55 priority */
|
|
#define MCFINTC2_INTPRI8 (MCF_MBAR2 + 0x15c) /* 56-63 priority */
|
|
|
|
#define MCFINTC2_INTPRI_REG(i) (MCFINTC2_INTPRI1 + \
|
|
((((i) - MCFINTC2_VECBASE) / 8) * 4))
|
|
#define MCFINTC2_INTPRI_BITS(b, i) ((b) << (((i) % 8) * 4))
|
|
|
|
/*
|
|
* Timer module.
|
|
*/
|
|
#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */
|
|
#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */
|
|
|
|
/*
|
|
* UART module.
|
|
*/
|
|
#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
|
|
#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
|
|
|
|
/*
|
|
* QSPI module.
|
|
*/
|
|
#define MCFQSPI_BASE (MCF_MBAR + 0x400) /* Base address QSPI */
|
|
#define MCFQSPI_SIZE 0x40 /* Register set size */
|
|
|
|
#ifdef CONFIG_M5249
|
|
#define MCFQSPI_CS0 29
|
|
#define MCFQSPI_CS1 24
|
|
#define MCFQSPI_CS2 21
|
|
#define MCFQSPI_CS3 22
|
|
#else
|
|
#define MCFQSPI_CS0 15
|
|
#define MCFQSPI_CS1 16
|
|
#define MCFQSPI_CS2 24
|
|
#define MCFQSPI_CS3 28
|
|
#endif
|
|
|
|
/*
|
|
* I2C module.
|
|
*/
|
|
#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base address I2C0 */
|
|
#define MCFI2C_SIZE0 0x20 /* Register set size */
|
|
|
|
#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base address I2C1 */
|
|
#define MCFI2C_SIZE1 0x20 /* Register set size */
|
|
|
|
/*
|
|
* DMA unit base addresses.
|
|
*/
|
|
#define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */
|
|
#define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */
|
|
#define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */
|
|
#define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */
|
|
|
|
/*
|
|
* Some symbol defines for the above...
|
|
*/
|
|
#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
|
|
#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
|
|
#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
|
|
#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */
|
|
#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
|
|
#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
|
|
#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
|
|
#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
|
|
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
|
|
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
|
|
#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */
|
|
|
|
/*
|
|
* Define system peripheral IRQ usage.
|
|
*/
|
|
#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */
|
|
#define MCF_IRQ_I2C0 29
|
|
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
|
|
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
|
|
|
|
#define MCF_IRQ_UART0 73 /* UART0 */
|
|
#define MCF_IRQ_UART1 74 /* UART1 */
|
|
|
|
/*
|
|
* Define the base interrupt for the second interrupt controller.
|
|
* We set it to 128, out of the way of the base interrupts, and plenty
|
|
* of room for its 64 interrupts.
|
|
*/
|
|
#define MCFINTC2_VECBASE 128
|
|
|
|
#define MCF_IRQ_GPIO0 (MCFINTC2_VECBASE + 32)
|
|
#define MCF_IRQ_GPIO1 (MCFINTC2_VECBASE + 33)
|
|
#define MCF_IRQ_GPIO2 (MCFINTC2_VECBASE + 34)
|
|
#define MCF_IRQ_GPIO3 (MCFINTC2_VECBASE + 35)
|
|
#define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36)
|
|
#define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37)
|
|
#define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38)
|
|
#define MCF_IRQ_GPIO7 (MCFINTC2_VECBASE + 39)
|
|
|
|
#define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40)
|
|
#define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62)
|
|
|
|
/*
|
|
* General purpose IO registers (in MBAR2).
|
|
*/
|
|
#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */
|
|
#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */
|
|
#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */
|
|
#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */
|
|
#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */
|
|
#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */
|
|
#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */
|
|
#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */
|
|
|
|
#define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */
|
|
#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */
|
|
#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */
|
|
|
|
#define MCFSIM2_DMAROUTE (MCF_MBAR2 + 0x188) /* DMA routing */
|
|
#define MCFSIM2_IDECONFIG1 (MCF_MBAR2 + 0x18c) /* IDEconfig1 */
|
|
#define MCFSIM2_IDECONFIG2 (MCF_MBAR2 + 0x190) /* IDEconfig2 */
|
|
|
|
/*
|
|
* Generic GPIO support
|
|
*/
|
|
#define MCFGPIO_PIN_MAX 64
|
|
#ifdef CONFIG_M5249
|
|
#define MCFGPIO_IRQ_MAX -1
|
|
#define MCFGPIO_IRQ_VECBASE -1
|
|
#else
|
|
#define MCFGPIO_IRQ_MAX 7
|
|
#define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
|
|
#ifdef __ASSEMBLER__
|
|
#ifdef CONFIG_M5249C3
|
|
/*
|
|
* The M5249C3 board needs a little help getting all its SIM devices
|
|
* initialized at kernel start time. dBUG doesn't set much up, so
|
|
* we need to do it manually.
|
|
*/
|
|
.macro m5249c3_setup
|
|
/*
|
|
* Set MBAR1 and MBAR2, just incase they are not set.
|
|
*/
|
|
movel #0x10000001,%a0
|
|
movec %a0,%MBAR /* map MBAR region */
|
|
subql #1,%a0 /* get MBAR address in a0 */
|
|
|
|
movel #0x80000001,%a1
|
|
movec %a1,#3086 /* map MBAR2 region */
|
|
subql #1,%a1 /* get MBAR2 address in a1 */
|
|
|
|
/*
|
|
* Move secondary interrupts to their base (128).
|
|
*/
|
|
moveb #MCFINTC2_VECBASE,%d0
|
|
moveb %d0,0x16b(%a1) /* interrupt base register */
|
|
|
|
/*
|
|
* Work around broken CSMR0/DRAM vector problem.
|
|
*/
|
|
movel #0x001F0021,%d0 /* disable C/I bit */
|
|
movel %d0,0x84(%a0) /* set CSMR0 */
|
|
|
|
/*
|
|
* Disable the PLL firstly. (Who knows what state it is
|
|
* in here!).
|
|
*/
|
|
movel 0x180(%a1),%d0 /* get current PLL value */
|
|
andl #0xfffffffe,%d0 /* PLL bypass first */
|
|
movel %d0,0x180(%a1) /* set PLL register */
|
|
nop
|
|
|
|
#if CONFIG_CLOCK_FREQ == 140000000
|
|
/*
|
|
* Set initial clock frequency. This assumes M5249C3 board
|
|
* is fitted with 11.2896MHz crystal. It will program the
|
|
* PLL for 140MHz. Lets go fast :-)
|
|
*/
|
|
movel #0x125a40f0,%d0 /* set for 140MHz */
|
|
movel %d0,0x180(%a1) /* set PLL register */
|
|
orl #0x1,%d0
|
|
movel %d0,0x180(%a1) /* set PLL register */
|
|
#endif
|
|
|
|
/*
|
|
* Setup CS1 for ethernet controller.
|
|
* (Setup as per M5249C3 doco).
|
|
*/
|
|
movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
|
|
movel %d0,0x8c(%a0)
|
|
movel #0x001f0021,%d0 /* CS1 size of 1Mb */
|
|
movel %d0,0x90(%a0)
|
|
movew #0x0080,%d0 /* CS1 = 16bit port, AA */
|
|
movew %d0,0x96(%a0)
|
|
|
|
/*
|
|
* Setup CS2 for IDE interface.
|
|
*/
|
|
movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
|
|
movel %d0,0x98(%a0)
|
|
movel #0x001f0001,%d0 /* CS2 size of 1MB */
|
|
movel %d0,0x9c(%a0)
|
|
movew #0x0080,%d0 /* CS2 = 16bit, TA */
|
|
movew %d0,0xa2(%a0)
|
|
|
|
movel #0x00107000,%d0 /* IDEconfig1 */
|
|
movel %d0,0x18c(%a1)
|
|
movel #0x000c0400,%d0 /* IDEconfig2 */
|
|
movel %d0,0x190(%a1)
|
|
|
|
movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
|
|
orl %d0,0xc(%a1) /* function GPIO19 */
|
|
orl %d0,0x8(%a1) /* enable GPIO19 as output */
|
|
orl %d0,0x4(%a1) /* de-assert IDE reset */
|
|
.endm
|
|
|
|
#define PLATFORM_SETUP m5249c3_setup
|
|
|
|
#endif /* CONFIG_M5249C3 */
|
|
#endif /* __ASSEMBLER__ */
|
|
/****************************************************************************/
|
|
#endif /* m525xsim_h */
|