forked from rrcarlosr/Jetpack
140 lines
2.9 KiB
C
140 lines
2.9 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002, 2010
|
|
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/s3c24x0_cpu.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define FCLK_SPEED 1
|
|
|
|
#if (FCLK_SPEED == 0) /* Fout = 203MHz, Fin = 12MHz for Audio */
|
|
#define M_MDIV 0xC3
|
|
#define M_PDIV 0x4
|
|
#define M_SDIV 0x1
|
|
#elif (FCLK_SPEED == 1) /* Fout = 202.8MHz */
|
|
#define M_MDIV 0xA1
|
|
#define M_PDIV 0x3
|
|
#define M_SDIV 0x1
|
|
#endif
|
|
|
|
#define USB_CLOCK 1
|
|
|
|
#if (USB_CLOCK == 0)
|
|
#define U_M_MDIV 0xA1
|
|
#define U_M_PDIV 0x3
|
|
#define U_M_SDIV 0x1
|
|
#elif (USB_CLOCK == 1)
|
|
#define U_M_MDIV 0x48
|
|
#define U_M_PDIV 0x3
|
|
#define U_M_SDIV 0x2
|
|
#endif
|
|
|
|
static inline void pll_delay(unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b" : "=r" (loops) : "0" (loops));
|
|
}
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initialisations
|
|
*/
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
struct s3c24x0_clock_power * const clk_power =
|
|
s3c24x0_get_base_clock_power();
|
|
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
|
|
|
|
/* to reduce PLL lock time, adjust the LOCKTIME register */
|
|
writel(0xFFFFFF, &clk_power->locktime);
|
|
|
|
/* configure MPLL */
|
|
writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
|
|
&clk_power->mpllcon);
|
|
|
|
/* some delay between MPLL and UPLL */
|
|
pll_delay(4000);
|
|
|
|
/* configure UPLL */
|
|
writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
|
|
&clk_power->upllcon);
|
|
|
|
/* some delay between MPLL and UPLL */
|
|
pll_delay(8000);
|
|
|
|
/* set up the I/O ports */
|
|
writel(0x007FFFFF, &gpio->gpacon);
|
|
writel(0x00044555, &gpio->gpbcon);
|
|
writel(0x000007FF, &gpio->gpbup);
|
|
writel(0xAAAAAAAA, &gpio->gpccon);
|
|
writel(0x0000FFFF, &gpio->gpcup);
|
|
writel(0xAAAAAAAA, &gpio->gpdcon);
|
|
writel(0x0000FFFF, &gpio->gpdup);
|
|
writel(0xAAAAAAAA, &gpio->gpecon);
|
|
writel(0x0000FFFF, &gpio->gpeup);
|
|
writel(0x000055AA, &gpio->gpfcon);
|
|
writel(0x000000FF, &gpio->gpfup);
|
|
writel(0xFF95FFBA, &gpio->gpgcon);
|
|
writel(0x0000FFFF, &gpio->gpgup);
|
|
writel(0x002AFAAA, &gpio->gphcon);
|
|
writel(0x000007FF, &gpio->gphup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* arch number of SMDK2410-Board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = 0x30000100;
|
|
|
|
icache_enable();
|
|
dcache_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
gd->ram_size = PHYS_SDRAM_1_SIZE;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_CS8900
|
|
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Hardcoded flash setup:
|
|
* Flash 0 is a non-CFI AMD AM29LV800BB flash.
|
|
*/
|
|
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
|
|
{
|
|
info->portwidth = FLASH_CFI_16BIT;
|
|
info->chipwidth = FLASH_CFI_BY16;
|
|
info->interface = FLASH_CFI_X16;
|
|
return 1;
|
|
}
|