forked from rrcarlosr/Jetpack
345 lines
9.7 KiB
Plaintext
345 lines
9.7 KiB
Plaintext
/*
|
|
* Copyright (c) 2015-2019, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/ {
|
|
host1x {
|
|
vi@15700000 {
|
|
num-channels = <2>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
imx274_vi_in0: endpoint {
|
|
port-index = <0>;
|
|
bus-width = <4>;
|
|
remote-endpoint = <&imx274_csi_out0>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
tc358840_vi_in0: endpoint {
|
|
port-index = <2>;
|
|
bus-width = <8>;
|
|
remote-endpoint = <&tc358840_csi_out0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
nvcsi@150c0000 {
|
|
num-channels = <2>;
|
|
channel@0 {
|
|
reg = <0>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
imx274_csi_in0: endpoint@0 {
|
|
port-index = <0>;
|
|
bus-width = <4>;
|
|
remote-endpoint = <&imx274_out0>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
imx274_csi_out0: endpoint@1 {
|
|
remote-endpoint = <&imx274_vi_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
channel@1 {
|
|
reg = <1>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
tc358840_csi_in0: endpoint@2 {
|
|
port-index = <2>;
|
|
bus-width = <8>;
|
|
remote-endpoint = <&tc358840_out0>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
tc358840_csi_out0: endpoint@3 {
|
|
remote-endpoint = <&tc358840_vi_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
i2c@3180000 {
|
|
imx274_a@1a {
|
|
compatible = "nvidia,imx274";
|
|
/* I2C device address */
|
|
reg = <0x1a>;
|
|
|
|
/* V4L2 device node location */
|
|
devnode = "video0";
|
|
|
|
/* Physical dimensions of sensor */
|
|
physical_w = "3.674";
|
|
physical_h = "2.738";
|
|
|
|
sensor_model = "imx274";
|
|
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
avdd-reg = "vana";
|
|
iovdd-reg = "vif";
|
|
dvdd-reg = "vdig";
|
|
|
|
/* Defines number of frames to be dropped by driver internally after applying */
|
|
/* sensor crop settings. Some sensors send corrupt frames after applying */
|
|
/* crop co-ordinates */
|
|
/*post_crop_frame_drop = "0";*/
|
|
|
|
/* if true, delay gain setting by one frame to be in sync with exposure */
|
|
delayed_gain = "true";
|
|
|
|
/**
|
|
* ==== Modes ====
|
|
* A modeX node is required to support v4l2 driver
|
|
* implementation with NVIDIA camera software stack
|
|
*
|
|
* == Signal properties ==
|
|
*
|
|
* phy_mode = "";
|
|
* PHY mode used by the MIPI lanes for this device
|
|
*
|
|
* tegra_sinterface = "";
|
|
* CSI Serial interface connected to tegra
|
|
* Incase of virtual HW devices, use virtual
|
|
* For SW emulated devices, use host
|
|
*
|
|
* pix_clk_hz = "";
|
|
* Sensor pixel clock used for calculations like exposure and framerate
|
|
*
|
|
* readout_orientation = "0";
|
|
* Based on camera module orientation.
|
|
* Only change readout_orientation if you specifically
|
|
* Program a different readout order for this mode
|
|
*
|
|
* == Image format Properties ==
|
|
*
|
|
* active_w = "";
|
|
* Pixel active region width
|
|
*
|
|
* active_h = "";
|
|
* Pixel active region height
|
|
*
|
|
* pixel_t = "";
|
|
* The sensor readout pixel pattern
|
|
*
|
|
* line_length = "";
|
|
* Pixel line length (width) for sensor mode.
|
|
*
|
|
* == Source Control Settings ==
|
|
*
|
|
* Gain factor used to convert fixed point integer to float
|
|
* Gain range [min_gain/gain_factor, max_gain/gain_factor]
|
|
* Gain step [step_gain/gain_factor is the smallest step that can be configured]
|
|
* Default gain [Default gain to be initialized for the control.
|
|
* use min_gain_val as default for optimal results]
|
|
* Framerate factor used to convert fixed point integer to float
|
|
* Framerate range [min_framerate/framerate_factor, max_framerate/framerate_factor]
|
|
* Framerate step [step_framerate/framerate_factor is the smallest step that can be configured]
|
|
* Default Framerate [Default framerate to be initialized for the control.
|
|
* use max_framerate to get required performance]
|
|
* Exposure factor used to convert fixed point integer to float
|
|
* For convenience use 1 sec = 1000000us as conversion factor
|
|
* Exposure range [min_exp_time/exposure_factor, max_exp_time/exposure_factor]
|
|
* Exposure step [step_exp_time/exposure_factor is the smallest step that can be configured]
|
|
* Default Exposure Time [Default exposure to be initialized for the control.
|
|
* Set default exposure based on the default_framerate for optimal exposure settings]
|
|
* For convenience use 1 sec = 1000000us as conversion factor
|
|
*
|
|
* gain_factor = ""; (integer factor used for floating to fixed point conversion)
|
|
* min_gain_val = ""; (ceil to integer)
|
|
* max_gain_val = ""; (ceil to integer)
|
|
* step_gain_val = ""; (ceil to integer)
|
|
* default_gain = ""; (ceil to integer)
|
|
* Gain limits for mode
|
|
*
|
|
* exposure_factor = ""; (integer factor used for floating to fixed point conversion)
|
|
* min_exp_time = ""; (ceil to integer)
|
|
* max_exp_time = ""; (ceil to integer)
|
|
* step_exp_time = ""; (ceil to integer)
|
|
* default_exp_time = ""; (ceil to integer)
|
|
* Exposure Time limits for mode (sec)
|
|
*
|
|
* framerate_factor = ""; (integer factor used for floating to fixed point conversion)
|
|
* min_framerate = ""; (ceil to integer)
|
|
* max_framerate = ""; (ceil to integer)
|
|
* step_framerate = ""; (ceil to integer)
|
|
* default_framerate = ""; (ceil to integer)
|
|
* Framerate limits for mode (fps)
|
|
*
|
|
* embedded_metadata_height = "";
|
|
* Sensor embedded metadata height in units of rows.
|
|
* If sensor does not support embedded metadata value should be 0.
|
|
*/
|
|
mode0 { // IMX274_MODE_3840X2160
|
|
mclk_khz = "24000";
|
|
num_lanes = "4";
|
|
tegra_sinterface = "serial_a";
|
|
phy_mode = "DPHY";
|
|
discontinuous_clk = "yes";
|
|
dpcm_enable = "false";
|
|
cil_settletime = "0";
|
|
|
|
active_w = "3840";
|
|
active_h = "2160";
|
|
mode_type = "bayer";
|
|
pixel_phase = "rggb";
|
|
csi_pixel_bit_depth = "10";
|
|
readout_orientation = "90";
|
|
line_length = "4208";
|
|
inherent_gain = "1";
|
|
mclk_multiplier = "24";
|
|
pix_clk_hz = "576000000";
|
|
|
|
gain_factor = "1000000";
|
|
min_gain_val = "1000000";
|
|
max_gain_val = "44400000";
|
|
step_gain_val = "1";
|
|
default_gain = "1000000";
|
|
min_hdr_ratio = "1";
|
|
max_hdr_ratio = "1";
|
|
framerate_factor = "1000000";
|
|
min_framerate = "1500000";
|
|
max_framerate = "60000000";
|
|
step_framerate = "1";
|
|
default_framerate= "60000000";
|
|
exposure_factor = "1000000";
|
|
min_exp_time = "44";
|
|
max_exp_time = "478696";
|
|
step_exp_time = "1";
|
|
default_exp_time = "16667";/* us */
|
|
embedded_metadata_height = "1";
|
|
};
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
imx274_out0: endpoint {
|
|
port-index = <0>;
|
|
bus-width = <4>;
|
|
remote-endpoint = <&imx274_csi_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
tc358840@1f {
|
|
compatible = "toshiba,tc358840";
|
|
|
|
reg = <0x1f>;
|
|
/* Physical dimensions of sensor */
|
|
physical_w = "4.713";
|
|
physical_h = "3.494";
|
|
|
|
/* Sensor Model */
|
|
sensor_model ="tc358840";
|
|
devnode ="video1";
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
tc358840_out0: endpoint {
|
|
port-index = <2>;
|
|
bus-width = <8>;
|
|
remote-endpoint = <&tc358840_csi_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tegra-camera-platform {
|
|
compatible = "nvidia, tegra-camera-platform";
|
|
/**
|
|
* Physical settings to calculate max ISO BW
|
|
*
|
|
* num_csi_lanes = <>;
|
|
* Total number of CSI lanes when all cameras are active
|
|
*
|
|
* max_lane_speed = <>;
|
|
* Max lane speed in Kbit/s
|
|
*
|
|
* min_bits_per_pixel = <>;
|
|
* Min bits per pixel
|
|
*
|
|
* vi_peak_byte_per_pixel = <>;
|
|
* Max byte per pixel for the VI ISO case
|
|
*
|
|
* vi_bw_margin_pct = <>;
|
|
* Vi bandwidth margin in percentage
|
|
*
|
|
* max_pixel_rate = <>;
|
|
* Max pixel rate in Kpixel/s for the ISP ISO case
|
|
*
|
|
* isp_peak_byte_per_pixel = <>;
|
|
* Max byte per pixel for the ISP ISO case
|
|
*
|
|
* isp_bw_margin_pct = <>;
|
|
* Isp bandwidth margin in percentage
|
|
*/
|
|
num_csi_lanes = <4>;
|
|
max_lane_speed = <1500000>;
|
|
min_bits_per_pixel = <10>;
|
|
vi_peak_byte_per_pixel = <2>;
|
|
vi_bw_margin_pct = <25>;
|
|
max_pixel_rate = <750000>;
|
|
isp_peak_byte_per_pixel = <2>;
|
|
isp_bw_margin_pct = <25>;
|
|
|
|
/**
|
|
* The general guideline for naming badge_info contains 3 parts, and is as follows,
|
|
* The first part is the camera_board_id for the module; if the module is in a FFD
|
|
* platform, then use the platform name for this part.
|
|
* The second part contains the position of the module, ex. “rear” or “front”.
|
|
* The third part contains the last 6 characters of a part number which is found
|
|
* in the module's specsheet from the vender.
|
|
*/
|
|
modules {
|
|
module0 {
|
|
badge = "imx274_front_A6V24";
|
|
position = "rear";
|
|
status = "okay";
|
|
orientation = "1";
|
|
drivernode0 {
|
|
/* Declare PCL support driver (classically known as guid) */
|
|
pcl_id = "v4l2_sensor";
|
|
devname = "imx274 2-001a";
|
|
status = "okay";
|
|
/* Declare the device-tree hierarchy to driver instance */
|
|
proc-device-tree = "/proc/device-tree/i2c@3180000/imx274_a@1a";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|