forked from rrcarlosr/Jetpack
142 lines
3.3 KiB
C
142 lines
3.3 KiB
C
/*
|
|
* (C) Copyright 2018-2019
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <libfdt.h>
|
|
#include <pca953x.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include "../p2571/max77620_init.h"
|
|
|
|
#define ETH_ALEN 6
|
|
|
|
void pin_mux_mmc(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar val;
|
|
int ret;
|
|
|
|
/* Turn on MAX77620 LDO2 to 3.3V for SD card power */
|
|
debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
|
|
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
|
|
return;
|
|
}
|
|
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
val = 0xF2;
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
|
|
|
|
/* Disable LDO4 discharge */
|
|
ret = dm_i2c_read(dev, MAX77620_CNFG2_L4_REG, &val, 1);
|
|
if (ret) {
|
|
printf("i2c_read 0 0x3c 0x2c failed: %d\n", ret);
|
|
} else {
|
|
val &= ~BIT(1); /* ADE */
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG2_L4_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x2c failed: %d\n", ret);
|
|
}
|
|
|
|
/* Set MBLPD */
|
|
ret = dm_i2c_read(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
|
|
if (ret) {
|
|
printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
|
|
} else {
|
|
val |= BIT(6); /* MBLPD */
|
|
ret = dm_i2c_write(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_TEGRA
|
|
int tegra_pcie_board_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar val;
|
|
int ret;
|
|
|
|
/* Turn on MAX77620 LDO1 to 1.05V for PEX power */
|
|
debug("%s: Set LDO1 for PEX power to 1.05V\n", __func__);
|
|
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
|
|
return -1;
|
|
}
|
|
/* 0xCA for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
val = 0xCA;
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG1_L1_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x25 failed: %d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* PCI */
|
|
|
|
/*
|
|
* Attempt to use /chosen/nvidia,ethernet-mac in the cboot DTB as U-Boot's
|
|
* ethaddr environment variable if possible.
|
|
*/
|
|
int set_ethaddr_from_cboot(const void *fdt)
|
|
{
|
|
int node, len, err;
|
|
const uchar *mac;
|
|
|
|
/* Already a valid address in the environment? If so, keep it */
|
|
if (getenv("ethaddr"))
|
|
return 0;
|
|
|
|
node = fdt_path_offset(fdt, "/chosen");
|
|
if (node < 0) {
|
|
printf("Can't find /chosen node in CBoot DTB\n");
|
|
return node;
|
|
}
|
|
mac = fdt_getprop(fdt, node, "nvidia,ethernet-mac", &len);
|
|
if (!mac) {
|
|
printf("Can't find nvidia,ethernet-mac property in CBoot DTB\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
debug("%s: MAC address: %s\n", __func__, mac);
|
|
|
|
/* Set MAC address */
|
|
err = setenv("ethaddr", (void *)mac);
|
|
if (err) {
|
|
printf("Failed to set ethaddr from CBoot DTB: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *fdt, bd_t *bd)
|
|
{
|
|
uchar mac[ETH_ALEN];
|
|
int node, err;
|
|
|
|
node = fdt_path_offset(fdt, "/pcie@1003000/pci@2,0/ethernet@0,0");
|
|
if (node < 0)
|
|
return 0;
|
|
|
|
debug("PCI ethernet device tree node found\n");
|
|
|
|
if (eth_getenv_enetaddr("ethaddr", mac)) {
|
|
err = fdt_setprop(fdt, node, "mac-address", mac, ETH_ALEN);
|
|
if (err < 0)
|
|
return 0;
|
|
|
|
debug("MAC address set: %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
}
|
|
|
|
return 0;
|
|
}
|