Jetpack/u-boot/board/amcc/luan/luan.c

224 lines
5.9 KiB
C

/*
* (C) Copyright 2005
* John Otken, jotken@softadvances.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
#include <asm/ppc4xx-isram.h>
#include <spd_sdram.h>
#include "epld.h"
DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*************************************************************************
* int board_early_init_f()
*
************************************************************************/
int board_early_init_f(void)
{
u32 mfr;
mtebc( PB0AP, 0x03800000 ); /* set chip selects */
mtebc( PB0CR, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
mtebc( PB1AP, 0x03800000 );
mtebc( PB1CR, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */
mtebc( PB2AP, 0x03800000 );
mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */
mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */
mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */
mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */
mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */
mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */
mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */
mtdcr( UIC1SR, 0xffffffff );
mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */
mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */
mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */
mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */
mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */
mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */
mtdcr( UIC0SR, 0xffffffff );
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
mtsdr(SDR0_MFR, mfr);
return 0;
}
/*************************************************************************
* int misc_init_r()
*
************************************************************************/
int misc_init_r(void)
{
volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE;
/* set modes of operation */
x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
/* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
/* put Ethernet+PHY in reset */
x->ethuart &= ~EPLD2_RESET_ETH_N;
udelay(10000);
/* take Ethernet+PHY out of reset */
x->ethuart |= EPLD2_RESET_ETH_N;
return 0;
}
/*************************************************************************
* int checkboard()
*
************************************************************************/
int checkboard(void)
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
printf("Board: Luan - AMCC PPC440SP Evaluation Board");
if (i > 0) {
puts(", serial# ");
puts(buf);
}
putc('\n');
return 0;
}
/*
* Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_clktr(u32 default_val) {
return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
}
/*************************************************************************
* hw_watchdog_reset
*
* This routine is called to reset (keep alive) the watchdog timer
*
************************************************************************/
#if defined(CONFIG_HW_WATCHDOG)
void hw_watchdog_reset(void)
{
}
#endif
/*************************************************************************
* int on_off()
*
************************************************************************/
static int on_off( const char *s )
{
if (strcmp(s, "on") == 0) {
return 1;
} else if (strcmp(s, "off") == 0) {
return 0;
}
return -1;
}
/*************************************************************************
* void l2cache_disable()
*
************************************************************************/
static void l2cache_disable(void)
{
mtdcr( L2_CACHE_CFG, 0 );
}
/*************************************************************************
* void l2cache_enable()
*
************************************************************************/
static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */
{
mtdcr( L2_CACHE_CFG, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */
mtdcr( L2_CACHE_ADDR, 0 ); /* set L2_ADDR with all zeros */
mtdcr( L2_CACHE_CMD, 0x80000000 ); /* issue HCLEAR command via L2_CMD */
while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 )) ;; /* poll L2_SR for completion */
mtdcr( L2_CACHE_CMD, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */
mtdcr( L2_CACHE_CMD, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */
mtdcr( L2_CACHE_SNP0, 0 ); /* snoop registers */
mtdcr( L2_CACHE_SNP1, 0 );
__asm__ volatile ("sync"); /* msync */
mtdcr( L2_CACHE_CFG, 0xe0000000 ); /* inst and data use L2 */
__asm__ volatile ("sync");
}
/*************************************************************************
* int l2cache_status()
*
************************************************************************/
static int l2cache_status(void)
{
return (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0;
}
/*************************************************************************
* int do_l2cache()
*
************************************************************************/
int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
switch (argc) {
case 2: /* on / off */
switch (on_off(argv[1])) {
case 0: l2cache_disable();
break;
case 1: l2cache_enable();
break;
}
/* FALL TROUGH */
case 1: /* get status */
printf ("L2 Cache is %s\n",
l2cache_status() ? "ON" : "OFF");
return 0;
default:
return cmd_usage(cmdtp);
}
return 0;
}
U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
"enable or disable L2 cache",
"[on, off]\n"
" - enable or disable L2 cache"
);