Jetpack/u-boot/arch/powerpc/include/asm/ppc4xx-gpio.h

104 lines
3.7 KiB
C

/*
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_PPC_GPIO_H
#define __ASM_PPC_GPIO_H
#include <asm/types.h>
/* 4xx PPC's have 2 GPIO controllers */
#if defined(CONFIG_405EZ) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define GPIO_GROUP_MAX 2
#else
#define GPIO_GROUP_MAX 1
#endif
/* GPIO controller */
struct ppc4xx_gpio {
u32 or; /* Output Control */
u32 tcr; /* Tri-State Control */
u32 osl; /* Output Select 16..31 */
u32 osh; /* Output Select 0..15 */
u32 tsl; /* Tri-State Select 16..31 */
u32 tsh; /* Tri-State Select 0..15 */
u32 odr; /* Open Drain */
u32 ir; /* Input */
u32 rr1; /* Receive Register 1 */
u32 rr2; /* Receive Register 2 */
u32 rr3; /* Receive Register 3 */
u32 reserved;
u32 is1l; /* Input Select 1 16..31 */
u32 is1h; /* Input Select 1 0..15 */
u32 is2l; /* Input Select 2 16..31 */
u32 is2h; /* Input Select 2 0..15 */
u32 is3l; /* Input Select 3 16..31 */
u32 is3h; /* Input Select 3 0..15 */
};
/* Offsets */
#define GPIOx_OR 0x00 /* GPIO Output Register */
#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
#define GPIOx_IR 0x1C /* GPIO Input Register */
#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
#define GPIO_OR(x) (x+GPIOx_OR) /* GPIO Output Register */
#define GPIO_TCR(x) (x+GPIOx_TCR) /* GPIO Three-State Control Register */
#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Select Register High or Low */
#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
#define GPIO0 0
#define GPIO1 1
#define GPIO_MAX 32
#define GPIO_ALT1_SEL 0x40000000
#define GPIO_ALT2_SEL 0x80000000
#define GPIO_ALT3_SEL 0xc0000000
#define GPIO_IN_SEL 0x40000000
#define GPIO_MASK 0xc0000000
#define GPIO_VAL(gpio) (0x80000000 >> (gpio))
#ifndef __ASSEMBLY__
typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t;
typedef struct {
unsigned long add; /* gpio core base address */
gpio_driver_t in_out; /* Driver Setting */
gpio_select_t alt_nb; /* Selected Alternate */
gpio_out_t out_val;/* Default Output Value */
} gpio_param_s;
#endif
void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
void gpio_write_bit(int pin, int val);
int gpio_read_out_bit(int pin);
int gpio_read_in_bit(int pin);
void gpio_set_chip_configuration(void);
#endif /* __ASM_PPC_GPIO_H */